This addresses a current shortcoming of the V8 SetNamedPropertyHandler
function.
It does not provide a way to intercept Object.defineProperty(..) calls.
As a result, these properties are not copied onto the contextified
sandbox when a new global property is added via either a function
declaration or a Object.defineProperty(global, ...) call.
Note that any function declarations or Object.defineProperty() globals
that are created asynchronously (in a setTimeout, callback, etc.) will
happen AFTER the call to copy properties, and thus not be caught.
The way to properly fix this is to add some sort of a
Object::SetNamedDefinePropertyHandler() function that takes a callback,
which receives the property name and property descriptor as arguments.
Luckily, such situations are rare, and asynchronously-added globals
weren't supported by Node's VM module until 0.12 anyway. But, this
should be fixed properly in V8, and this copy function should be removed
once there is a better way.
Fix#6416
The list of supported HTTP methods is available in JS land now so there
is no longer any need to pass a stringified version of the method to the
parser callback, it can look up the method name for itself.
Saves a call to v8::Eternal::Get() in the common case and a costly
v8::String::NewFromOneByte() in the uncommon case.
When the socket closes, the client's http incoming message object was
emitting an 'aborted' event if it had not yet been ended.
However, it's possible, when a response is being repeatedly paused and
resumed (eg, if piped to a slow FS write stream), that there will be a
final chunk remaining in the js-land buffer when the socket is torn
down.
When that happens, the socketCloseListener function detects that we have
not yet reached the end of the response message data, and treats this as
an abrupt abort, immediately (and forcibly) ending the incoming message
data stream, and discarding that final chunk of data.
The result is that, for example, npm will have problems because tarballs
are missing a few bytes off the end, every time.
Closes GH-6402
If a client sends a lot more pipelined requests than we can handle, then
we need to provide backpressure so that the client knows to back off.
Do this by pausing both the stream and the parser itself when the
responses are not being read by the downstream client.
Backport of 085dd30
Before this commit, the SIGUSR1 signal handler wasn't installed until
late in the bootstrapping process and we were prone to miss signals
sent by other processes.
This commit installs an early-boot signal handler that merely records
the fact that we received a signal. Once the debugger infrastructure
is in place, the signal is re-raised, kickstarting the debugger.
Among other things, this means that simple/test-debugger-client is
now _much_ less likely to fail.
Commit 30e5366b ("core: Use a uv_signal for debug listener") changed
SIGUSR1 handling from a signal handler to libuv's uv_signal_*()
functionality to fix a race condition (and possible hang) in the
signal handler.
While a good change in itself, it made it impossible to interrupt
long running scripts. When a script is stuck in a busy loop, control
never returns to the event loop, which in turn means the signal
callback - and therefore the debugger - is never invoked.
This commit changes SIGUSR1 handling back to a normal signal handler
but one that treads _very_ carefully.
If a client sends a lot more pipelined requests than we can handle, then
we need to provide backpressure so that the client knows to back off.
Do this by pausing both the stream and the parser itself when the
responses are not being read by the downstream client.
Fix GH-6214
Don't emit the 'disconnect' event until all workers have gone away.
Before this commit, the event was emitted when all open handles were
closed, which usually - but not always - amounts to the same thing.
Fixes#6346.
fs.truncate() and its synchronous sibling are implemented in terms of
open() + ftruncate(). Unfortunately, it opened the target file with
mode 'w' a.k.a. 'write-only and create or truncate at open'.
The subsequent call to ftruncate() then moved the end-of-file pointer
from zero to the requested offset with the net result of a file that's
neatly truncated at the right offset and filled with zero bytes only.
This bug was introduced in commit 168a5557 but in fairness, before that
commit fs.truncate() worked like fs.ftruncate() so it seems we've never
had a working fs.truncate() until now.
Fixes#6233.
Don't forget to initialize the c-ares task tree head when creating a
new Environment. Oversight from the multi-context work that landed
in commit 756b622.
Fixes#6244.
Fix "Assertion failed" when trying to connect to non-int ports:
Assertion failed: (args[2]->Uint32Value()), function Connect,
file ../src/tcp_wrap.cc, line 379.
Abort trap: 6
The `options` that were being passed in before here are specific to a
single request, which kinda defeats the purpose of using an Agent in the
first place.
On a worse note, these `options` have not yet been "processed" by the
`http.ClientRequest` class, so if `port: null` is set (like it is as the
result of a `url.parse()` call), then they take preference over the
processed values since the agent's "options" get mixed in last in the
`createSocket()` function.
Fixes#6197.
Fixes#6199.
Closes#6231.
Otherwise the data ends up "on the wire" twice, and
switching between consuming the stream using `ondata`
vs. `read()` would yield duplicate data, which was bad.
Functions created using: `vm.runInNewContext('(function() { })')` will
reference only `proxy_global_` object and not `sandbox_`. Thus in case,
where there're no references to sandbox (such as in example above),
`ContextifyContext` will be destroyed and use-after-free might happen.
The NPN protocols was set on `require('tls')` or `global` object instead
of being a local property. This fact lead to strange persistence of NPN
protocols, and sometimes incorrect protocol selection (when no NPN
protocols were passed in client options).
fix#6168
Slowness being somewhat subjective but determined by running the
test suite a few times and picking off everything that consistently
clocks in at 2 seconds or more.
Honorable mention for simple/test-tls-server-large-request, it often
runs for 10 (!) seconds or more.
Since it is Unix tradition to use exit code 1 for general-purpose script
bail-out, and the way of doing that in Node is to throw an exception and
not catch it, it makes the most sense to exit with 1 when an exception
goes uncaught.
Move the `Invalid Argument` exit to 9, so that it's something specific,
and clear that it's a node internal error.
Also, document the exit codes that we use.
From commit 756ae2c all the WRAP/UNWRAP were moved to a single location
for ease of use. In a single location NO_ABORT should have been used but
wasn't. This caused HandleWrap::Close to abort. Below is the applicable
code change as demonstration there was no abort specified when
unwrapping the object.
void HandleWrap::Close(const FunctionCallbackInfo<Value>& args) {
HandleScope scope(node_isolate);
- HandleWrap *wrap = static_cast<HandleWrap*>(
- args.This()->GetAlignedPointerFromInternalField(0));
+ HandleWrap* wrap;
+ UNWRAP(args.This(), HandleWrap, wrap);
Also included a test that will reproduce the abort.
In cases where the Agent has maxSockets=Infinity, and
keepAlive=false, there's no case where we won't immediately close the
connection after the response is completed.
Since we're going to close it anyway, send a `connection:close` header
rather than a `connection:keep-alive` header. Still send the
`connection:keep-alive` if the agent will actually reuse the socket,
however.
Closes#5838
Adding a new `repl-harmony` test file here because adding the
`--use_strict --harmony` flags on the main repl test file was causing
lots of unrelated failures, due to global variable assignments and
things like that. This new test file is based off of the original
repl.js test file, but has a lot of the tests stripped out. A test case
for this commit is included though.
Fixes#6132.
Replace the growing list of 'isSyntaxError' whackamole conditions with a
smarter approach. This creates a vm Script object *first*, which will
parse the code and raise a SyntaxError right away.
We still do need the test function, but only because strict mode syntax
errors are not recoverable, and should be raised right away. Really, we
should probably *only* continue on "unexpected end of input" SyntaxErrors.
Also fixes a very difficult-to-test nit where the '...' indentation is
not properly cleared when you ^C out of a syntax error.
Closes#6093
This is useful when we need to push some debugging messages out to
stderr, without going through the Writable class, or triggering any kind
of nextTick or callback behavior.
* Exit with an error message when the option is not a node or V8 option.
* Remove the option_end_index global. Needs to happen anyway for
the multi-context work, might as well land it in master now.
* Add a smidgen of const-correctness.
* Pay off a few years of accrued technical debt.
Don't wait a full second before starting the watcher, 10 ms ought to be
more than enough time. Reduces running time from 1250 ms to 250 ms on
my system.
This change is not entirely ready for prime time: it's making ~50 tests
fail on Windows, mostly due to timeouts. It's up for debate who is
at fault here: node.js or libuv.
It does however expose a libuv bug on OS X, where the event loop
sometimes gets stuck in uv__io_poll() when there is a single
UV_SHUTDOWN request left in the queue. Needs further investigation.
This reverts commit 4915884da6.
Commit 556b890 added a call to uv_loop_delete() with the intent of
catching handle lifecycle bugs. It worked because it exposed one:
process.on('exit', function() {
console.log('bye'); // Asserts.
});
When run, it asserts with the following message:
Assertion failed: (!uv__has_active_reqs(loop)), function
uv__loop_delete, file ../deps/uv/src/unix/loop.c, line 150.
That's because libuv as of joyent/libuv@3f2d4d5 checks that there are
no in-flight requests when the event loop is destroyed. In the test
case above, the write request for the string hasn't completed yet by
the time node.js exits: the string itself has most likely been written
but libuv hasn't had the opportunity to return the write request to
node.js.
That's why this commit adds a cleanup step right before exit where it
explicitly closes all open handles, then waits until the event loop
exits naturally.
Named pipes (UNIX domain sockets) are shut down first in order to flush
pending write requests. Should go some way towards fixing the Windows
issue where output on stdout/stderr sometimes gets truncated.
Fixesjoyent/libuv#911.
isaacs
Ben Noordhuis
Timothy J Fontaine
Patrik Stutz
Jason Gerfen
Rod Vagg
Trevor Norris
Glen Mailer
Alex Kocharin
Fedor Indutny
Eric Schrock
Maciej Małecki
Nathan Rajlich
Julian Gruber