With the introduction of temporary paths in the test runner
realpath tests would bail in scenarios where the temporary folder
wasn't in the same directory as the source code.
PR-URL: https://github.com/nodejs/node/pull/4477
Reviewed-By: Rich Trott <rtrott@gmail.com>
test-fs-realpath.js was writing files to the fixture dir. This changes
it to use the temp directory instead. This also replaces some of the
string concatenation for paths with uses of path.join() and
path.relative().
PR-URL: https://github.com/nodejs/node/pull/4489
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
A few tests assumed that temp dirs always lived in the same
parent folder as fixtures. Make these use `common.tmpDir` instead.
PR-URL: https://github.com/nodejs/node/pull/3325
Reviewed-By: Joao Reis <reis@janeasystems.com>
In CI we previously passed `NODE_COMMON_PIPE` to the test runner to
avoid long filenames. Add an option to the test runner that allows the
user to change the temporary directory instead. This also allows us to
run test suites in parallel since `NODE_COMMON_PIPE` otherwise would
have been used from multiple tests at the same time.
PR-URL: https://github.com/nodejs/node/pull/3325
Reviewed-By: Joao Reis <reis@janeasystems.com>
Remove all remaining unused variables from tests in test/parallel.
PR-URL: https://github.com/nodejs/node/pull/4511
Reviewed-By: James M Snell<jasnell@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
The http tests seem especially prone to including unused variables.
This change removes them.
PR-URL: https://github.com/nodejs/node/pull/4422
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Debug mode slows execution speed. There is work afoot to enable Debug
mode runs on the continuous integration infrastructure for the project.
Some tests are timing out, such as test-net-GH-5504.js.
This change doubles the timeout returned from `common.platformTimeout()`
when running in Debug mode. It also removes an unused variable from the
aforementioned test-net-GH-5504.js.
PR-URL: https://github.com/nodejs/node/pull/4431
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Some of the TLS tests have variables that do not get used. This removes
those variables.
PR-URL: https://github.com/nodejs/node/pull/4424
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Remove a handful of variables that are declared but never used in the
tests for the net module.
PR-URL: https://github.com/nodejs/node/pull/4430
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
In addition to removing unused vars, this also fixes an instance where
booleans were set presumably to check something but then never used.
This now confirms that the events that were setting the booleans are
fired.
PR-URL: https://github.com/nodejs/node/pull/4425
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Remove unused vars in tests
PR-URL: https://github.com/nodejs/node/pull/4536
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Many tests use require() to import modules that subsequently never gets
used. This removes those imports and, in a few cases, removes other
unused variables from tests.
PR-URL: https://github.com/nodejs/node/pull/4684
Reviewed-By: Myles Borins <mborins@us.ibm.com>
On single core Windows systems, process.send() would cause an
EPIPE because of the ordering of the IPC channel disconnect and
the process.send().
The test was originally only relevant for non-Windows platforms,
so this commit merely skips the test on Windows.
Fixes: https://github.com/nodejs/node/issues/4450
PR-URL: https://github.com/nodejs/node/pull/4457
Reviewed-By: Rich Trott <rtrott@gmail.com>
Three tests designated as flaky on Linux have not failed on the
continuous integration server in a long time. Removing flaky designation
for these tests.
Fixes: https://github.com/nodejs/node/issues/4446
PR-URL: https://github.com/nodejs/node/pull/4519
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Use common.platformTimeout() to fix flaky
test-stream2-readable-empty-buffer-no-eofi on Raspberry Pis.
Fixes: https://github.com/nodejs/node/issues/4493
PR-URL: https://github.com/nodejs/node/pull/4516
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: James M Snell<jasnell@gmail.com>
test-child-process-fork-net2.js checks that things happen within
certain time constraints, thus doubling as a benchmark test in addition
to a functionality test.
This change removes the time check, as it was causing the test to fail
on SmartOS and Windows (and possibly elsewhere) when the tests were
run in parallel on CI. There is no guarantee that other tests won't
consume enough resources to slow this test down, so don't check the time
constraints (beyond the generous timeout that the test is given by
test.py in the first place, of course).
If we want to do benchmark/performance tests, we should keep them
separate from pure functionality tests. The time check may have been a
remnant of the distant past when Node.js was much slower. It predates
io.js
Ref: https://github.com/nodejs/node/pull/4476
PR-URL: https://github.com/nodejs/node/pull/4494
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Refactor test to remove unnecessary booleans and one unnecesary timer.
Instead, throw Error objects where appropriate and rely on
common.mustCall().
The timer seemed to be the source of an issue when parallelizing tests.
Ref: https://github.com/nodejs/node/pull/4476#issuecomment-168080875
PR-URL: https://github.com/nodejs/node/pull/4490
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Add a comment to clarify how the tests work and their purpose.
Also removes unnecessary assignment of domain module to a variable.
PR-URL: https://github.com/nodejs/node/pull/4474
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Julien Gilli <jgilli@fastmail.fm>
Improves the message when an assertion fires in the
test-net-pipe-connect-errors so that it indicates the incorrect value
received rather than merely reporting that the value is incorrect.
PR-URL: https://github.com/nodejs/node/pull/4461
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Many test modules load assert but do not use it. This change removes
those instances.
It also removes a handful of other unused variables when they were
nearby.
PR-URL: https://github.com/nodejs/node/pull/4438
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
It is possible that the internal hnadleMessage() might try to send to
a channel that has been closed. The result can be an AssertionError.
Guard against this.
Fixes: https://github.com/nodejs/node/issues/4205
PR-URL: https://github.com/nodejs/node/pull/4418
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
`aethrow` is defined as a function returned from makeBlock() but the
function is never used and the call to makeBlock() does not run any
tests.
PR-URL: https://github.com/nodejs/node/pull/4405
Reviewed-By: James M Snell <jasnell@gmail.com>
https requests with different SNI values should not be sent over the
same connection, even if the `host` is the same. Server may want to
present different certificate or route the incoming TLS connection
differently, depending on the received servername extension.
Fix: https://github.com/nodejs/node/issues/3940
PR-URL: https://github.com/nodejs/node/pull/4389
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
assert.deepEqual: when actual and expected are typed arrays,
wrap them in a new Buffer each to increase performance
significantly.
PR-URL: https://github.com/nodejs/node/pull/4330
Fixes: https://github.com/nodejs/node/issues/4294
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
1c85849973 "fixed"
test-domain-exit-dispose-again by changing its logic to test that
process.domain was cleared properly in case an error was thrown from a
timer's callback.
However, it became clear when reviewing a recent change that refactors
lib/timers.js that it was not quite the intention of the original test.
Thus, this change adds the original implementation of
test-domain-exit-dispose-again back, with comments that make its
implementation easier to understand.
It also preserve the changes made by
1c85849973, but it moves them to a new
test file named test-timers-reset-process-domain-on-throw.js.
PR: #4256
PR-URL: https://github.com/nodejs/node/pull/4256
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
socket.destroy() triggers a 'close' event from the socket which triggers
the onClose handler of HTTPAgent which calls self.removeSocket(). So by
calling self.removeSocket() prior to socket.destroy() we end up with two
calls to self.removeSocket().
If there are pending requests, removeSocket ends up creating a new socket.
So if there are pending requests, each time a request completes, we tear
down one socket and create two more. So the total number of sockets grows
exponentially and without regard for any maxSockets settings. This was
noticed in https://github.com/nodejs/node/issues/4050. Let's get rid of
the extra calls to removeSocket so we only call it once per completed
request.
PR-URL: https://github.com/nodejs/node/pull/4172
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Load the certificate chain from the PFX file the same as we do it for a
regular certificate chain.
Fix: #4127
PR-URL: https://github.com/nodejs/node/pull/4165
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
If the deprecated NODE_REPL_HISTORY_FILE is set to default
node history file path ($HOME/.node_repl_history) and the file
doesn't exist, then node creates the file and then crashes when
it tries to parse that file as JSON thinking that it's an older
JSON formatted history file. This fixes that bug.
This patch also prevents node repl from throwing if the old
history file is empty or if $HOME/.node_repl_history is empty.
Fixes: https://github.com/nodejs/node/issues/4102
PR-URL: https://github.com/nodejs/node/pull/4108
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
When a client calls read() with a nonzero argument
on a Socket, that Socket sets this._consuming to true.
It never sets this._consuming back to false.
ChildProcess.flushStdio() currently doesn't flush
any streams where _consuming is truthy. But, that means
that it never flushes any stream that has ever been read from.
This prevents a child process from ever closing if one of
its streams has been read from, causing issue #4049. This
commit allows consuming streams to be flushed, and the
child process to emit a close event.
Fixes: https://github.com/nodejs/node/issues/4049
PR-URL: https://github.com/nodejs/node/pull/4071
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
A number of tests in `test/parallel` were importing the `util` module
via `require()` but not using `util` for anything. This removes those
`require()` statements.
PR-URL: https://github.com/nodejs/node/pull/4562
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
common.js needs to be loaded in all tests so that there is checking
for variable leaks and possibly other things. However, it does not
need to be assigned to a variable if nothing in common.js is referred
to elsewhere in the test.
The main tradeoff for this bit of code churn is that it gets the code
base most of the way to being able to enable the no-unused-vars rule in
eslint.
(The non-tooling benefit is that it lessens cognitive load when reading
tests as it is an immediate indication that none of the functions or
properties in common.js will be used by the test.)
PR-URL: https://github.com/nodejs/node/pull/4563
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Fix module loading of third-party modules in the REPL by inheriting
module.paths from the REPL's parent module.
Commit ee72ee7 ("module,repl: remove repl require() hack") introduced
a regression where require() of modules in node_modules directories
no longer worked in the REPL (and fortunately only in the REPL.)
It turns out we didn't have test coverage for that but we do now.
Fixes: https://github.com/nodejs/node/issues/4208
PR-URL: https://github.com/nodejs/node/pull/4215
Reviewed-By: Roman Reiss <me@silverwind.io>
A number of REPL tests define the same ArrayStream object. This
commit moves the repeated code into common.js.
PR-URL: https://github.com/nodejs/node/pull/4027
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Conflicts:
test/common.js
Move the method that was added in commit 8ca412b from earlier this month
from lib/util.js to lib/internal/util.js.
Avoids exposing a method that we may not wish to expose just yet, seeing
how it relies on implementation details.
PR-URL: https://github.com/nodejs/node/pull/4026
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Remove a hack that was introduced in commit bb6d468d from November 2010.
This is groundwork for a follow-up commit that makes it possible to use
internal modules in lib/repl.js.
PR-URL: https://github.com/nodejs/node/pull/4026
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Conflicts:
lib/module.js
This commit adds the decorateErrorStack() method. This function
uses the internal util's getHiddenValue() method to extract
arrow messages from error objects and attach them to the
error's stack trace.
PR-URL: https://github.com/nodejs/node/pull/4013
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This commit adds an internal util method that makes hidden
values in the C++ layer visible in JS.
PR-URL: https://github.com/nodejs/node/pull/3988
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Conflicts:
lib/internal/util.js
Without these changes, the pi1-raspbian-wheezy CI node was timing
out on these tests.
PR-URL: https://github.com/nodejs/node/pull/4387
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Occasionally test-http-client-onerror will fail with a refused connection.
This patch fixes the possibility that connections will be attempted before
server is listening.
PR-URL: https://github.com/nodejs/node/pull/4346
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: James M Snell <jasnell@gmail.com>
On Windows there can exist some race condition where the
notification of the client's `socket.destroy()` isn't received
before the server writes to the socket. This race condition was
more evident/reproducible on a single core system.
This commit fixes the flakiness by waiting until the server's
connection event handler has been called to destroy the client
socket and perform the server socket write.
Fixes: https://github.com/nodejs/node/issues/4057
PR-URL: https://github.com/nodejs/node/pull/4342
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: João Reis <reis@janeasystems.com>
Rewrite the test so that stderr reordering of the child processes won't
confuse the test's expectations.
PR-URL: https://github.com/nodejs/node/pull/4310
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
It does not currently have any explicit tests to verify the behavior.
PR-URL: https://github.com/nodejs/node/pull/4283
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
In dfee4e3712, the module wrapper
and line offset used when wrapping module code was changed to
better report errors on the first line of modules. However, that
commit did not update the runInThisContext() call used to
execute the core modules, so their error line numbers have been
off by one. This commit provides the correct lineOffset for core
modules.
Refs: https://github.com/nodejs/node/pull/2867
PR-URL: https://github.com/nodejs/node/pull/4254
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Minwoo Jung <jmwsoft@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
ARMv8 machines are typically quite fast and likely may not need
extended timeout times.
PR-URL: https://github.com/nodejs/node/pull/4248
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Johan Bergström
Rich Trott
Brian White
Fedor Indutny
Claudio Rodriguez
Julien Gilli
Dave
Mudit Ameta
Ben Noordhuis
cjihrig
Devin Nakamura
Evan Lucas
Jeremiah Senkpiel