Cherry picked from d976d66cfc
PR-URL: https://github.com/nodejs/node/pull/7321
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Guard against the call to write() inside pipe's ondata pushing more data
back onto the Readable, thus causing ondata to be called again.
This is fine but results in awaitDrain being increased more than once.
The problem with that is when the destination does drain, only a single
'drain' event is emitted, so awaitDrain in this case will never reach
zero and we end up with a permanently paused stream.
Fixes: https://github.com/nodejs/node/issues/7278
PR-URL: https://github.com/nodejs/node/pull/7292
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
When `maybeReadMore` kicks in on a first bytes of incoming data, the
`req.read(0)` will be invoked and the `req._consuming` will be set to
`true`. This seemingly harmless property leads to a dire consequences:
the server won't call `req._dump()` and the whole HTTP/1.1 pipeline will
hang (single connection).
PR-URL: https://github.com/nodejs/node/pull/7211
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Replace '...' as invalid hostname with '***', which will give a more
consisten error message on different systems. The hostname '...' returns
EAI_AGAIN on musl libc and EAI_NONAME on most other systems.
By changing the testcase we get same restult on all known platforms.
PR-URL: https://github.com/nodejs/node/pull/5099
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
This commit removes some unnecessary signed checks on unsigned
variables and removes a few unused private functions.
PR-URL: https://github.com/nodejs/node/pull/7174
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit optimizes checkInvalidHeaderChar() by unrolling the
character checking loop a bit.
Additionally, some changes to the benchmark runner are needed in
order for the included benchmark to be run correctly. Specifically,
the regexp used to parse `key=value` parameters contained a greedy
quantifier that was causing the `key` to match part of the `value`
if `value` contained an equals sign.
PR-URL: https://github.com/nodejs/node/pull/6570
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
This commit both makes checkIsHttpToken() inlinable and extracts
the character checking logic to a separate inlinable function so that
the main loop can be unrolled a bit.
PR-URL: https://github.com/nodejs/node/pull/6570
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reset the `readableState.awaitDrain` counter after manual calls to
`.resume()`.
What might happen otherwise is that a slow consumer at the end of the
pipe could end up stalling the piping in the following scenario:
1. The writable stream indicates that its buffer is full.
2. This leads the readable stream to `pause()` and increase its
`awaitDrain` counter, which will be decreased by the writable’s next
`drain` event.
3. Something calls `.resume()` manually.
4. The readable continues to pipe to the writable, but once again
the writable stream indicates that the buffer is full.
5. The `awaitDrain` counter is thus increased again, but since it has
now been increased twice for a single piping destination, the next
`drain` event will not be able to reset `awaitDrain` to zero.
6. The pipe is stalled and no data is passed along anymore.
The solution in this commit is to reset the `awaitDrain` counter to
zero when `resume()` is called.
Fixes: https://github.com/nodejs/node/issues/7159
PR-URL: https://github.com/nodejs/node/pull/7160
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Currently the license builder is expecting the ICU package to be
found at `deps/icu`. ICU is now included by default and found at
`deps/icu-small`. This commit adds logic to find the license at the new
location.
This could likely be done in a more elegant way, but it works!
PR-URL: https://github.com/nodejs/node/pull/7119
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Steven R Loomis <srloomis@us.ibm.com>
PR-URL: https://github.com/nodejs/node/pull/7216
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
This reverts commit d413378e51.
PR-URL: https://github.com/nodejs/node/pull/7216
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
The prerequisite for rebuilding was on the binding.gyp file but the
actual sources.
PR-URL: https://github.com/nodejs/node/pull/7262
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
As the description in http.md:
> If the body contains higher coded characters then
Buffer.byteLength() should be used to determine the number of
bytes in a given encoding.
PR-URL: https://github.com/nodejs/node/pull/7274
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jackson Tian <shyvo1987@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/7239
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: cjihrig - Colin Ihrig <cjihrig@gmail.com>
This helps to prevent issues where a failed test can keep a bound
socket open long enough to cause other tests to fail with EADDRINUSE
because the same port number is used.
PR-URL: https://github.com/nodejs/node/pull/7045
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
This benchmark fails on Windows when trying to execute command which
is more than 32k in size. This commits skips this one case when running
under Windows.
PR-URL: https://github.com/nodejs/node/pull/7178
Reviewed-By: Trott - Rich Trott <rtrott@gmail.com>
Reviewed-By: orangemocha - Alexis Campailla <orangemocha@nodejs.org>
Clarify that using a port value of `0` will result in the operating
system identifying an available port for use.
PR-URL: https://github.com/nodejs/node/pull/7206
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: cjihrig - Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Under Windows 'ipc' communication requires the other process to format
its messages with 'IPC framing protocol'. Otherwise, an assert is
triggered in libuv. This commit changes child-process-read benchmark
to use stdout to communicate with parent process. It also adds
child-process-read-ipc.js to benchmark IPC communication using
child node process.
PR-URL: https://github.com/nodejs/node/pull/6971
Reviewed-By: João Reis <reis@janeasystems.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
cluster.setupMaster() can be called more than once. Core even has
tests for this functionality. This commit removes an incorrect
statement to the contrary from the documentation.
Fixes: https://github.com/nodejs/node/issues/7156
PR-URL: https://github.com/nodejs/node/pull/7179
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Claudio Rodriguez <cjrodr@yahoo.com>
Avoid sending messages if the IPC channel is already disconnected. It
avoids undesired errors when calling `process.disconnect` when there are
still pending IPC messages.
PR-URL: https://github.com/nodejs/node/pull/7132
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Remove obsolete `setTimeout()` introduced in 3148f1400. The fix for the
problem is in b266074347. (For the record, I mostly don't know what I'm
talking about here but am summarizing from an IRC #node-dev conversation
with @indutny on 04-Jun-2016.)
PR-URL: https://github.com/nodejs/node/pull/7154
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Most Windows systems do not have an external `echo` program installed,
so any attempts to spawn `echo` as a child process will fail with
`ENOENT`. This commit forces the use of the built-in `echo` provided
by `cmd.exe`.
PR-URL: https://github.com/nodejs/node/pull/7049
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: João Reis <reis@janeasystems.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
PR-URL: https://github.com/nodejs/node/pull/7155
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Fix issues with disabled test-debug-brk-no-arg and re-enable the test.
PR-URL: https://github.com/nodejs/node/pull/7143
Reviewed-By: Fedor Indutny <fedor@indutny.com>
In prose, always surround `null`-as-a-value in backticks.
PR-URL: https://github.com/nodejs/node/pull/6986
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Robert Jefe Lindstaedt <robert.lindstaedt@gmail.com>
Updating tests to use `common.fixturesDir` whenever possible/reasonable.
Left out things like tests for `path` and `require.resolve`.
PR-URL: https://github.com/nodejs/node/pull/6997
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The repl documentation has always been rather lacking. This is
a first step towards making significant improvements.
PR-URL: https://github.com/nodejs/node/pull/7002
Reviewed-By: Anna Henningsen <anna@addaleax.net>
When `free`ing the socket to be reused in keep-alive Agent wait for
both `prefinish` and `end` events. Otherwise the next request may be
written before the previous one has finished sending the body, leading
to a parser errors.
PR-URL: https://github.com/nodejs/node/pull/7149
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Got the information from git history, I added the version when Interface
was exported as class (v0.1.104), it was an internal class on previous
versions.
Refs: https://github.com/nodejs/node/issues/6578
PR-URL: https://github.com/nodejs/node/pull/6996
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
`stdout` was written as `inline code` most of the time,
except for the `console.time` and `console.timeEnd`
functions which made it a bit more tedious to read about.
Now it's always using inline code.
PR-URL: https://github.com/nodejs/node/pull/7062
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Robert Jefe Lindstaedt <robert.lindstaedt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/7161
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
The test script (tools/test.py) logs duration as "duration_ms: x.y".
This is confusing (as the duration is measured in seconds).
New example output: duration: 0.212s
PR-URL: https://github.com/nodejs/node/pull/7133
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Claudio Rodriguez <cjrodr@yahoo.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Lance Ball
Evan Lucas
Rich Trott
David Halls
Fedor Indutny
Natanael Copa
Brian White
Anna Henningsen
Myles Borins
Rod Vagg
Ben Noordhuis
kimown
James M Snell
Bartosz Sosnowski
cjihrig
Santiago Gimeno
Ilkka Myller
Bryan English
Kat Marchán
Julian Duque
Jonathan Montane
Luigi Pinca
Gibson Fahnestock