When configuring node --without-ssl or --without-inspector these test
will fail. The underlying issue will be:
Inspector support is not available with this Node.js build
/work/nodejs/node/out/Release/node: bad option: --inspect=0
This commit adds checks to see if inspector support is enabled and if
not skips these tests.
PR-URL: https://github.com/nodejs/node/pull/13324
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Eugene Ostroukhov <eostroukhov@chromium.org>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
It appears that either c-ares no longer calls callbacks synchronously
or we have since explicitly taken care of the scenarios in which
c-ares would call callbacks synchronously (e.g. resolving an IP
address or an empty hostname). Therefore we no longer need to have
machinery in place to handle possible synchronous callback invocation.
This improves performance significantly.
PR-URL: https://github.com/nodejs/node/pull/13261
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: James M Snell <jasnell@gmail.com>
0.0.0.0 is more common than other special ipv4 addresses, so
it is possible that we may not get ENOTFOUND for such addresses.
Instead, this commit uses a less common address that is reserved
for documentation (RFC) use only.
PR-URL: https://github.com/nodejs/node/pull/13261
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/13206
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
gpg 2.1 no longer includes the key-id by default which breaks
the release script. This makes sure we are explicit about it.
PR-URL: https://github.com/nodejs/node/pull/13309
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Pure refactor, makes no functional changes but the renaming helped me
see more clearly what the relationship was between methods and
variables.
* Renamed methods to reduce number of slightly different names for the
same thing ("thread" vs "io thread", etc.).
* Added comments where it was useful to me.
PR-URL: https://github.com/nodejs/node/pull/13321
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
The test is flaky under load. These changes greatly improve reliability.
* Use a recurring interval to determine when the test should end rather
than a timer.
* Increase server timeout to 500ms to allow for events being delayed by
system load
Changing to an interval has the added benefit of reducing the test run
time from over 2 seconds to under 1 second.
Fixes: https://github.com/nodejs/node/issues/13307
PR-URL: https://github.com/nodejs/node/pull/13312
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Alexey Orlenko <eaglexrlnk@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/13313
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Noticed this while reading through writing-tests.md today.
As per style guide avoid the use of you, your etc.
Rational as per: http://www2.ivcc.edu/rambo/tip_formal_writing_voice.htm
PR-URL: https://github.com/nodejs/node/pull/13319
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
It takes time to build each of the addons used to test n-api.
Consolidate a few of the smaller ones to save build time.
PR-URL: https://github.com/nodejs/node/pull/13317
Reviewed-By: Jason Ginchereau <jasongin@microsoft.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Previously, napi_wrap() would only work with objects created from a
constructor returned by napi_define_class(). While the N-API team
was aware of this limitation, it was not clearly documented and is
likely to cause confusion anyway. It's much simpler if addons are
allowed to use any JS object. Also, the specific behavior of the
limitation is difficult to reimplement on other VMs that work
differently from V8.
V8 requires object internal fields to be declared on the object
prototype (which napi_define_class() used to do). Since it's too
late to modify the object prototype by the time napi_wrap() is
called, napi_wrap() now inserts a new object (with the internal
field) into the supplied object's prototype chain. Then it can be
retrieved from there later by napi_unwrap().
This change also includes improvements to the documentation for
napi_create_external(), partly to explain how it is different from
napi_wrap().
PR-URL: https://github.com/nodejs/node/pull/13250
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
PR-URL: https://github.com/nodejs/node/pull/13371
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
* Remove useless constructor.
* Use template literals.
* Update code example.
Now all arrays with just holes are outputted the same way.
In the fixed example, it was `[ <101 empty items> ]` twice.
PR-URL: https://github.com/nodejs/node/pull/13298
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
* Use common.mustNotCall() and common.mustCall() as appropriate
* Use block scoping
* Move assertions out of `exit` handler and into callbacks
* Order assert.strictEqual() args per docs
* Remove console.log() calls
* Move test from `parallel` to `sequential` so `common.PORT` can be used
without conflicting with OS-provided ports in other `parallel` tests
PR-URL: https://github.com/nodejs/node/pull/13273
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Use `common.mustCall()` to make sure noop function is called as
expected.
PR-URL: https://github.com/nodejs/node/pull/13259
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Functions that call `ECDH::BufferToPoint` were not clearing the
error stack on failure, so an invalid key could leave leftover
error state and cause subsequent (unrelated) signing operations
to fail.
PR-URL: https://github.com/nodejs/node/pull/13275
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Re-enable test-http-abort-stream-end and put it into parallel
category. Use system random port when calling server.listen()
and fix eslint errors.
After calling request.abort(), in order to avoid the buffered
data to trigger the 'data' event, explicitly remove 'data' event
listeners.
PR-URL: https://github.com/nodejs/node/pull/13260
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
On macOS, a watcher created with fs.watch() does not necessarily
start receiving events immediately. So it can miss a change by
fs.writefile() if it comes very soon after the watcher is created. Fix
test flakiness caused by this by using `setInterval()` to repeat the
write action.
PR-URL: https://github.com/nodejs/node/pull/13252
Fixes: https://github.com/nodejs/node/issues/13248
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Use `common.mustNotCall()` in test-stream2-objects.js to confirm that
noop function is never invoked.
PR-URL: https://github.com/nodejs/node/pull/13249
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
One of the N-API weak-reference test cases already had to be made
asynchronous to handle different behavior in a newer V8 version:
https://github.com/nodejs/node/pull/12864
When porting N-API to Node-ChakraCore, we found more of the test
cases needed similar treatment:
https://github.com/nodejs/node-chakracore/issues/246 So to make
thes tests more robust (and avoid having differences in the test code
for Node-ChakraCore), I am refactoring the tests in this file to
insert a `setImmedate()` callback before every call to `gc()` and
assertions about the effects of the GC.
PR-URL: https://github.com/nodejs/node/pull/13121
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Add testing for all types of typed arrays.
Add testing for napi_is_arraybuffer.
PR-URL: https://github.com/nodejs/node/pull/13244
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jason Ginchereau <jasongin@microsoft.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Kunal Pathak <kunal.pathak@microsoft.com>
Reviewed-By: Hitesh Kanwathirtha <digitalinfinity@gmail.com>
BUILDING.md
+ L122: Missing code-language flag
+ L170: Strong should use `*` as a marker
doc/changelogs/CHANGELOG_V6.md
+ L1494: Don't pad `emphasis` with inner spaces
doc/guides/maintaining-V8.md
+ L3: Don't use multiple top level headings
+ L16: Don't use multiple top level headings
+ L40: Don't use multiple top level headings
+ L124: Don't use multiple top level headings
+ L182: Missing code-language flag
+ L223: Don't use multiple top level headings
+ L288: Don't use multiple top level headings
+ L307: Don't use multiple top level headings
doc/guides/writing-tests.md
+ L322: Missing code-language flag
+ L329: Missing code-language flag
doc/releases.md
+ L299: Missing code-language flag
PR-URL: https://github.com/nodejs/node/pull/13270
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Alexey Orlenko <eaglexrlnk@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Allow binding to a randomly assigned port number with `--inspect=0`
or `--inspect-brk=0`.
PR-URL: https://github.com/nodejs/node/pull/5025
Refs: https://github.com/nodejs/node/issues/4419
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
When V8 is built from its master branch, it adds a " (candidate)"
suffix to the version string. Add support for that in the tests so it
does not fail with Node canary.
PR-URL: https://github.com/nodejs/node/pull/13282
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Currently this test will fail with the following error message when
configured --without-ssl:
Error: Node.js is not compiled with openssl crypto support
This commit checks for crypto and skips this tests if such support
is not available.
PR-URL: https://github.com/nodejs/node/pull/13253
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/13276
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
PR-URL: https://github.com/nodejs/node/pull/13220
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Update the list of root certificates in src/node_root_certs.h with
tools/mk-ca-bundle.pl.
Certificates added:
- TUBITAK Kamu SM SSL Kok Sertifikasi - Surum 1
Certificates removed:
- ApplicationCA - Japanese Government
- Microsec e-Szigno Root CA
- TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı H6
- WellsSecure Public Root Certificate Authority
PR-URL: https://github.com/nodejs/node/pull/13279
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Nikolai Vavilov
Daniel Bevenius
rmdm
David D Lowe
Bidisha Pyne
sreepurnajasti
Brian White
Timothy Gu
Sam Roberts
Josh Ferge
Gibson Fahnestock
Myles Borins
Rich Trott
James, please
Refael Ackermann
Dan Fabulich
Vse Mozhet Byt
Michael Dawson
Thorsten Lorenz
Jason Ginchereau
Tobias Nießen
Anna Henningsen
Alexander O'Mara
Ryan Kelly
Yihong Wang
JongChan Choi
James M Snell
Daijiro Wachi
Ben Noordhuis
Michaël Zasso
Kat Marchán
cjihrig