Classes cannot be instantiated without new, but util.deprecate()
uses Function.prototype.apply(). This commit uses new.target to
detect constructor calls, allowing classes to be deprecated.
PR-URL: https://github.com/nodejs/node/pull/7690
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
A new version of ESLint flags chained properties on multiple lines that
were not flagged by the previous version of ESLint. In preparation for
turning that feature on, adjust alignment to that expected by the
linter.
This change happened to be predominantly around assertions using
`assert()` and `assert.equal()`. These were changed to
`assert.strictEqual()` where possible.
PR-URL: https://github.com/nodejs/node/pull/7920
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Set the `SIGUSR2` handler before spawning the child process to make sure
the signal is always handled.
Fixes: https://github.com/nodejs/node/issues/7767
PR-URL: https://github.com/nodejs/node/pull/7854
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
When SIMD is enabled, `util.format` couldn’t display objects
(with at least 1 key) because the formatter function got
overridden.
PR-URL: https://github.com/nodejs/node/pull/7864
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/7927
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Claudio Rodriguez <cjrodr@yahoo.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Make the inspector code easier to reason about by restructuring it
to avoid manual memory allocation and copying as much as possible.
An amusing side effect is that it reduces the total amount of memory
used in the test suite.
Before:
$ valgrind ./out/Release/cctest 2>&1 | grep 'total heap' | cut -c31-
1,017 allocs, 1,017 frees, 21,695,456 allocated
After:
$ valgrind ./out/Release/cctest 2>&1 | grep 'total heap' | cut -c31-
869 allocs, 869 frees, 14,484,641 bytes allocated
PR-URL: https://github.com/nodejs/node/pull/7906
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Competing timers were causing a race condition and thus the test was
flaky. Instead, we check an object property on process exit.
Fixes: https://github.com/nodejs/node/issues/7650
PR-URL: https://github.com/nodejs/node/pull/7857
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: jasnell - James M Snell <jasnell@gmail.com>
For nested timers with the same timeout, we can get into a situation
where we have recreated a timer list immediately before we need to
clean up an old timer list with the same key. Fix: make sure the list
to be deleted is the same instance as the list whose reference was used
to determine that a cleanup is necessary. If it's not the same instance,
a new list with the same key has been created, and it should not be
deleted.
Fixes: https://github.com/nodejs/node/issues/7722
PR-URL: https://github.com/nodejs/node/pull/7827
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Julien Gilli <jgilli@fastmail.fm>
The test takes 50 seconds on some of the project's Windows CI
infrastructure. Reducing the test repetitions from 50 to 20 trims that
to about 20 seconds. Tests will timeout at 60 seconds, so this helps
keep the test reliable. (There was a timeout on CI today when testing an
unrelated code change.)
Refs: https://github.com/nodejs/node/pull/7827#issuecomment-235476222
PR-URL: https://github.com/nodejs/node/pull/7886
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: JungMinu - Minwoo Jung <jmwsoft@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
```js
node 🙈 ₹ git:(upstream ⚡ display-error-repl) ./node
> var 4;
var 4;
^
SyntaxError: Unexpected number
>
```
PR-URL: https://github.com/nodejs/node/pull/7589
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Sometimes it is necessary to preprocess some initial bit
of a stream data before giving the entire stream
to the main processing function. Sometimes this bit should be extracted
from the stream before the main processing; sometimes it should be
returned to the stream. This test checks an order of stream
modes, methods and events for a possible preprocessing algorithm.
Stream BOM stripping is selected as a use case.
See https://github.com/nodejs/help/issues/221 as the prehistory.
PR-URL: https://github.com/nodejs/node/pull/7741
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Use the common.isWindows, common.isFreeBSD and common.isSunOS where
possible.
Add common.isOSX and common.isLinux.
Fix `test-fs-read-file-sync-hostname` as in its current form was not
being run anywhere.
PR-URL: https://github.com/nodejs/node/pull/7845
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit allows child_process.fork() to pass stdio options
to spawn(). This allows fork() to more easily take advantage of
additional stdio channels.
Refs: https://github.com/nodejs/node-v0.x-archive/issues/5727
PR-URL: https://github.com/nodejs/node/pull/7811
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Minwoo Jung <jmwsoft@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
The `test/common` module has the capability to identify if any variable
is leaked to the global scope and fail the test. So that has to be
imported at the beginning.
PR-URL: https://github.com/nodejs/node/pull/7786
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This patch
1. moves the basic validation of arguments to `truncate` family
of functions to the JavaScript layer from the C++ layer.
2. makes sure that the File Descriptors are validated strictly.
PR-URL: https://github.com/nodejs/node/pull/2498
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
The "fs" module has two functions called `maybeCallback` and
`makeCallback`, as of now.
The `maybeCallback` creates a default function to report errors, if the
parameter passed is not a function object. Basically, if the callback
is omitted in some cases, this function is used to create a default
callback function.
The `makeCallback`, OTOH, creates a default function only if the
parameter passed is `undefined`, and if it is not a function object it
will throw an `Error`.
This patch removes the `maybeCallback` function and makes the callback
function argument mandatory for all the async functions.
PR-URL: https://github.com/nodejs/node/pull/7168
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
The issue of hosts that do not resolve `localhost` to `::1` is now
handled within the tests. Remove flaky status for
test-https-connect-address-family and test-tls-connect-address-family.
PR-URL: https://github.com/nodejs/node/pull/7766
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
test-fs-read-buffer-tostring-fail and test-fs-readfile-tostring-fail
have been timing out on Raspberry Pi 3 devices on the continuous
integration server. These devices have 1 Gb of RAM and the tests are
memory intensive. Previous checks for memory intensive tests used a 512
Mb cut-off, but that was probably instituted when we only had Pi 1
devices.
Consequently, this change increases the threshold for memory-intensive
tests to 1 Gb and adds that threshold to test-fs-readfile-tostring-fail.
PR-URL: https://github.com/nodejs/node/pull/7772
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
If something bad happens in spawnSync, stderr might be null. Therefore,
we have to check it before using it, so we won't mask the actual
exception.
PR-URL: https://github.com/nodejs/node/pull/6877
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Robert Jefe Lindstädt <robert.lindstaedt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
The test case fails in AIX due to the mixed-use of unspecified
and loopback addresses. This is not a problem in most platforms
but fails in AIX. (In Windows too, but does not manifest as the
test is omitted in Windows for a different reason).
There exists no documented evidence which supports the mixed use
of unspecified and loopback addresses.
While AIX strictly follows the IPV6 specification with respect to
unspecified address ('::') and loopback address ('::1'), the test
case latches on to the behavior exhibited by other platforms,
and hence it fails in AIX.
The proposed fix is to make it work in all platforms including
AIX by using the loopback address for the client to connect,
as that is the address at which the server listens.
Fixes: https://github.com/nodejs/node/issues/7563
PR-URL: https://github.com/nodejs/node/pull/7702
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Many of the tests use variables to track when callback functions
are invoked or events are emitted. These variables are then
asserted on process exit. This commit replaces this pattern in
straightforward cases with common.mustCall(). This makes the
tests easier to reason about, leads to a net reduction in lines
of code, and uncovered a few bugs in tests. This commit also
replaces some callbacks that should never be called with
common.fail().
PR-URL: https://github.com/nodejs/node/pull/7753
Reviewed-By: Wyatt Preul <wpreul@gmail.com>
Reviewed-By: Minwoo Jung <jmwsoft@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Inspect boxed symbol objects in the same way other boxed primitives
are inspected.
Fixes: https://github.com/nodejs/node/issues/7639
PR-URL: https://github.com/nodejs/node/pull/7641
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Many tests use assert.fail(null, null, msg) where it would be
simpler to use common.fail(msg). This is largely because
common.fail() is fairly new. This commit makes the replacement
when applicable.
PR-URL: https://github.com/nodejs/node/pull/7735
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Provide additional information about values that indicate test failed.
PR-URL: https://github.com/nodejs/node/pull/7693
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
A number of test files use IIFEs to separate distinct tests from
each other in the same file. The project has been moving toward
using block scopes and let/const in favor of IIFEs. This commit
moves IIFE tests to block scopes. Some additional cleanup such
as use of strictEqual() and common.mustCall() is also included.
PR-URL: https://github.com/nodejs/node/pull/7694
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
A few of the child process tests can be simplified by computing
the OS specific root directory in common and then accessing that
value.
PR-URL: https://github.com/nodejs/node/pull/7685
Reviewed-By: Roman Reiss <me@silverwind.io>
All quotes in .eslintrc were unnecessary and inconsistently placed
across the file. Additionally, format the globals to be consistent
with the style of whitespace and sorted them alphabetically.
PR-URL: https://github.com/nodejs/node/pull/7691
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Hopefully clarify the behaviour of `buffer.indexOf()` and
`buffer.includes()` for numbers in that they will be
truncated to uint8s.
Add tests for that behaviour.
Fixes: https://github.com/nodejs/node/issues/7591
PR-URL: https://github.com/nodejs/node/pull/7611
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This change is in preparation for lint-enforced brace style.
PR-URL: https://github.com/nodejs/node/pull/7630
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Disable stdio buffering, it interacts poorly with printf() calls from
elsewhere in the program (e.g., any logging from V8.) Unbreaks among
other things the `--trace_debug_json` switch.
Undoes commit 0966ab99 ("src: force line buffering for stderr"), which
in retrospect is not a proper fix. Turning on line buffering fixed a
flaky test on SmartOS but the test wasn't failing on other platforms,
where stderr wasn't line-buffered either. Mark the test flaky again,
it failed once in a run of 333 tries on the smartos-64 buildbot.
Disabling buffering should be safe even when mixed with non-blocking
stdio I/O because libuv goes to great lengths to reopen the tty file
descriptors and falls back to blocking I/O when that fails.
PR-URL: https://github.com/nodejs/node/pull/7610
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
`messageCount` is assigned, but never used. Remove it.
(This was missed by the linter in previous versions of ESLint but is
flagged by the current version. Updating the linter is contingent on
this change or some similar remedy landing.)
PR-URL: https://github.com/nodejs/node/pull/7599
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Remove handful of variables that are assigned but never used.
(This was missed by the linter in previous versions of ESLint but is
flagged by the current version. Updating the linter is contingent on
this change or some similar remedy landing.)
PR-URL: https://github.com/nodejs/node/pull/7598
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
`connections` is assigned but never used. Remove it.
(This was missed by the linter in previous versions of ESLint but is
flagged by the current version. Updating the linter is contingent on
this change or some similar remedy landing.)
PR-URL: https://github.com/nodejs/node/pull/7595
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The test is memory intensive and times out occasionally on Raspberry Pi
devices in CI. Successful test runs take about 90 seconds, but the
devices time out after 120 seconds. That's not a lot of headroom. So
let's skip the test on devices that have only modest amounts of memory.
Fixes: https://github.com/nodejs/node/issues/7042
PR-URL: https://github.com/nodejs/node/pull/7575
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
vladimir
Rich Trott
Santiago Gimeno
Anna Henningsen
cjihrig
Prince J Wesley
Ben Noordhuis
Vse Mozhet Byt
Erin Spiceland
Evan Lucas
Sakthipriyan Vairamani
Robert Chiras
Gireesh Punathil
Christopher Jeffrey
Jeremy Whitlock
silverwind
Matteo Collina
Jeremiah Senkpiel
Diosney Sarmiento