There has been occasional nits for spacing in object literals in PRs but
the project does not lint for it and it is not always handled
consistently in the existing code, even on adjacent lines of a file.
This change enables a linting rule requiring no space between the key
and the colon, and requiring at least one space (but allowing for more
so property values can be lined up if desired) between the colon and the
value. This appears to be the most common style used in the current code
base.
Example code the complies with lint rule:
myObj = { foo: 'bar' };
Examples that do not comply with the lint rule:
myObj = { foo : 'bar' };
myObj = { foo:'bar' };
PR-URL: https://github.com/nodejs/node/pull/6592
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
It allows reopening a server after it has been closed.
Fixes: https://github.com/nodejs/node/issues/6693
PR-URL: https://github.com/nodejs/node/pull/6981
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ron Korving <ron@ronkorving.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Avoid sending messages if the IPC channel is already disconnected. It
avoids undesired errors when calling `process.disconnect` when there are
still pending IPC messages.
PR-URL: https://github.com/nodejs/node/pull/7132
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Remove special handling when asserting on a pair of arguments objects.
The code being removed will only run if both `expected` and `actual` are
arguments objects. Given that situation, the subsequent code for
handling everything else works just fine.
Tests added to confirm expected behavior.
This came about while trying to improve test coverage. The segment of
code removed had no test coverage. I was unable to write a test that
would both exercise the code and fail if the code was removed. Further
examination indicated that this was because the special handling was not
needed.
PR-URL: https://github.com/nodejs/node/pull/7413
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Remove obsolete `setTimeout()` introduced in 3148f1400. The fix for the
problem is in b266074347. (For the record, I mostly don't know what I'm
talking about here but am summarizing from an IRC #node-dev conversation
with @indutny on 04-Jun-2016.)
PR-URL: https://github.com/nodejs/node/pull/7154
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
When `free`ing the socket to be reused in keep-alive Agent wait for
both `prefinish` and `end` events. Otherwise the next request may be
written before the previous one has finished sending the body, leading
to a parser errors.
PR-URL: https://github.com/nodejs/node/pull/7149
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
When debug flags are passed to clustered applications, the debug
port is rewritten for each worker process to avoid collisions.
Prior to this commit, each debug flag would get a unique value.
This commit reworks the logic to assign the same port value to
all debug flags for a single worker.
PR-URL: https://github.com/nodejs/node/pull/7050
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
cluster's internal message handling includes a cache of callback
functions. Once the message for that callback is received, it is
removed from the cache. If, for any reason, the same message ID
is processed twice, the callback will be missing from the cache
and cluster will try to call undefined as a function. This commit
guards against this scenario.
Refs: https://github.com/nodejs/node/issues/6561
PR-URL: https://github.com/nodejs/node/pull/6902
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
When `maybeReadMore` kicks in on a first bytes of incoming data, the
`req.read(0)` will be invoked and the `req._consuming` will be set to
`true`. This seemingly harmless property leads to a dire consequences:
the server won't call `req._dump()` and the whole HTTP/1.1 pipeline will
hang (single connection).
PR-URL: https://github.com/nodejs/node/pull/7211
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
When the 'buffer' encoding is passed to spawnSync(), an exception
is thrown in Buffer's toString() method because 'buffer' is not
a valid encoding there. This commit special cases the 'buffer'
encoding.
Fixes: https://github.com/nodejs/node/issues/6930
PR-URL: https://github.com/nodejs/node/pull/6939
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
OS X has a tiny 1kb hard-coded buffer size for stdout / stderr to
TTYs (terminals). Output larger than that causes chunking, which ends
up having some (very small but existent) delay past the first chunk.
That causes two problems:
1. When output is written to stdout and stderr at similar times, the
two can become mixed together (interleaved). This is especially
problematic when using control characters, such as \r. With
interleaving, chunked output will often have lines or characters erased
unintentionally, or in the wrong spots, leading to broken output.
CLI apps often extensively use such characters for things such as
progress bars.
2. Output can be lost if the process is exited before chunked writes
are finished flushing. This usually happens in applications that use
`process.exit()`, which isn't infrequent.
See https://github.com/nodejs/node/issues/6980 for more info.
This became an issue as result of the Libuv 1.9.0 upgrade. A fix to
an unrelated issue broke a hack previously required for the OS X
implementation. This resulted in an unexpected behavior change in node.
The 1.9.0 upgrade was done in c3cec1eefc,
which was included in v6.0.0.
Full details of the Libuv issue that induced this are at
https://github.com/nodejs/node/issues/6456#issuecomment-219974514
Refs: https://github.com/nodejs/node/pull/1771
Refs: https://github.com/nodejs/node/issues/6456
Refs: https://github.com/nodejs/node/pull/6773
Refs: https://github.com/nodejs/node/pull/6816
PR-URL: https://github.com/nodejs/node/pull/6895
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
This backports the new `Buffer.alloc()`, `Buffer.allocUnsafe()`,
`Buffer.from()`, and `Buffer.allocUnsafeSlow()` APIs for v4.
Some backported tests are disabled, but those are not related to the
new API.
Note that `Buffer.from(arrayBuffer[, byteOffset [, length]])` is not
supported in v4.x, only `Buffer.from(arrayBuffer)` is.
Refs: https://github.com/nodejs/node/pull/4682
Refs: https://github.com/nodejs/node/pull/5833
Refs: https://github.com/nodejs/node/pull/7475
PR-URL: https://github.com/nodejs/node/pull/7562
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Nikolai Vavilov <vvnicholas@gmail.com>
When handling a response to `CONNECT` request - skip message body
and do not attempt to parse the next message. `CONNECT` requests are
used in similar sense to HTTP Upgrade.
Fix: https://github.com/nodejs/node/pull/6198
PR-URL: https://github.com/nodejs/node/pull/6279
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Replacing the regexp and replace function with a loop improves
performance by ~60-200%.
PR-URL: https://github.com/nodejs/node/pull/5360
Reviewed-By: James M Snell <jasnell@gmail.com>
By manually copying arguments and breaking the try/catch out, we are
able to improve the performance of util.format by 20-100% (depending on
the types).
PR-URL: https://github.com/nodejs/node/pull/5360
Reviewed-By: James M Snell <jasnell@gmail.com>
When a worker is disconnecting, it shuts down all of the handles
it is waiting on. It is possible that a handle does not have an
owner, which causes a crash. This commit closes such handles
without accessing the missing owner.
Fixes: https://github.com/nodejs/node/issues/6561
PR-URL: https://github.com/nodejs/node/pull/6909
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Currently, if an IPC event handler throws an error, it can
cause the message to not be consumed, leading to messages piling
up. This commit causes IPC events to be emitted on the next tick,
allowing the channel's processing logic to move forward as
normal.
Fixes: https://github.com/nodejs/node/issues/6561
PR-URL: https://github.com/nodejs/node/pull/6909
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Before this commit `node --debug-port=1234 debug t.js` ignored the
--debug-port= argument, binding to the default port 5858 instead,
making it impossible to debug more than one process on the same
machine that way.
This commit also reduces the number of places where the default port
is hard-coded by one.
Fixes: https://github.com/nodejs/node/issues/3345
PR-URL: https://github.com/nodejs/node/pull/3470
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Guard against the call to write() inside pipe's ondata pushing more data
back onto the Readable, thus causing ondata to be called again.
This is fine but results in awaitDrain being increased more than once.
The problem with that is when the destination does drain, only a single
'drain' event is emitted, so awaitDrain in this case will never reach
zero and we end up with a permanently paused stream.
Fixes: https://github.com/nodejs/node/issues/7278
PR-URL: https://github.com/nodejs/node/pull/7292
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reset the `readableState.awaitDrain` counter after manual calls to
`.resume()`.
What might happen otherwise is that a slow consumer at the end of the
pipe could end up stalling the piping in the following scenario:
1. The writable stream indicates that its buffer is full.
2. This leads the readable stream to `pause()` and increase its
`awaitDrain` counter, which will be decreased by the writable’s next
`drain` event.
3. Something calls `.resume()` manually.
4. The readable continues to pipe to the writable, but once again
the writable stream indicates that the buffer is full.
5. The `awaitDrain` counter is thus increased again, but since it has
now been increased twice for a single piping destination, the next
`drain` event will not be able to reset `awaitDrain` to zero.
6. The pipe is stalled and no data is passed along anymore.
The solution in this commit is to reset the `awaitDrain` counter to
zero when `resume()` is called.
Fixes: https://github.com/nodejs/node/issues/7159
PR-URL: https://github.com/nodejs/node/pull/7160
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
ESLint 2.9.0 fixes some bugs that resulted in minor issues not being
caught by ESLint 2.7.0. Update instances of our code that will be
flagged when we upgrade to ESLint 2.9.0.
PR-URL: https://github.com/nodejs/node/pull/6498
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
This commit allows all array properties to be printed except for
"length". Previously, this filter was applied by checking the
type of each property. However, something changed in V8, and
array elements started coming through as numeric strings, which
stopped them from being displayed.
Fixes: https://github.com/nodejs/node/issues/6444
PR-URL: https://github.com/nodejs/node/pull/6448
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
`Object.prototype.__defineGetter__` is deprecated now, use
`Object.defineProperty` instead.
PR-URL: https://github.com/nodejs/node/pull/6284
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
In debugger, the usage of `repl` very ugly. I'd like there is a `p`
like gdb. So the `exec` is coming.
Usage:
```
$ ./iojs debug ~/git/node_research/server.js
< Debugger listening on port 5858
connecting to 127.0.0.1:5858 ... ok
break in /Users/jacksontian/git/node_research/server.js:1
> 1 var http = require('http');
2
3 http.createServer(function (req, res) {
debug> exec process.title
/Users/jacksontian/git/io.js/out/Release/iojs
debug>
```
And the `repl`:
```
debug> repl
Press Ctrl + C to leave debug repl
> process.title
'/Users/jacksontian/git/io.js/out/Release/iojs'
debug>
(^C again to quit)
```
The enter and leave debug repl is superfluous.
R-URL: https://github.com/nodejs/node/pull/1491
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Correct alignment on variable assignments that span multiple lines in
preparation for lint rule to enforce such alignment.
PR-URL: https://github.com/nodejs/node/pull/6869
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
An internal zlib error may cause _handle to be set to null.
Close now will check if there is a _handle prior to calling .close on
it.
PR-URL: https://github.com/nodejs/node/pull/5982
Fixes: https://github.com/nodejs/node/issues/6034
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
`lib/internal/v8_prof_processor.js` was being excluded from linting, but
the only lint issue it has is that it cannot run in strict mode. Disable
the `strict` rule with a comment and remove the file from
`.eslintignore`.
PR-URL: https://github.com/nodejs/node/pull/6262
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Roman Klauke <romaaan.git@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
When underlying `net.Socket` instance is consumed in http server - no
`data` events are emitted, and thus `socket.setTimeout` fires the
callback even if the data is constantly flowing into the socket.
Fix this by calling `socket._unrefTimer()` on every `onParserExecute`
call.
Fix: #5899
PR-URL: https://github.com/nodejs/node/pull/6286
Reviewed-By: James M Snell <jasnell@gmail.com>
Special handling to detect when user has supplied a custom message.
Added a test for user message.
When testing if `actual` value is an error use
`util.isError` instead of `instanceof`.
Fixes: https://github.com/nodejs/node/issues/2385
PR-URL: https://github.com/nodejs/node/pull/2407
Reviewed-By: James M Snell <jasnell@gmail.com>
In 68990948fe (https://github.com/nodejs/node/pull/2325),
the conditions for increasing `readableState.awaitDrain` when
writing to a piping destination returns false were changed so
that they could not actually be met, effectively leaving
`readableState.awaitDrain` with a constant value of 0.
This patch changes the conditions to testing whether the
stream for which `.write()` returned false is still a piping
destination, which was likely the intention of the original
patch.
Fixes: https://github.com/nodejs/node/issues/5820
Fixes: https://github.com/nodejs/node/issues/5257
PR-URL: https://github.com/nodejs/node/pull/6023
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
IPv6 addresses in Host header (URI), must be enclosed within
square brackets, in order to properly separate the host address
from any port reference.
PR-URL: https://github.com/nodejs/node/pull/5314
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
This makes sure that `kNoZeroFill` flag is not accidentally set by
moving the all the flag operations directly inside `createBuffer()`.
It safeguards against logical errors like
https://github.com/nodejs/node/issues/6006.
This also ensures that `kNoZeroFill` flag is always restored to 0 using
a try-finally block, as it could be not restored to 0 in cases of failed
or zero-size `Uint8Array` allocation.
It safeguards against errors like
https://github.com/nodejs/node/issues/2930.
It also makes the `size > 0` check not needed there.
PR-URL: https://github.com/nodejs/node-private/pull/30
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Do not convert typed arrays to `Buffer` for deepEqual since
their values may not be accurately represented by 8-bit ints.
Instead perform binary comparison of underlying `ArrayBuffer`s,
but only when the array types match.
Never apply any kind of optimization for floating-point typed
arrays since bit pattern equality is not the right kind of check
for them.
PR-URL: https://github.com/nodejs/node/pull/5910
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Fixes: https://github.com/nodejs/node/issues/5907
Rich Trott
Santiago Gimeno
Fedor Indutny
Prince J Wesley
cjihrig
Eugene Obrezkov
Jeremiah Senkpiel
James M Snell
Сковорода Никита Андреевич
Anna Henningsen
Brian White
Evan Lucas
Matt Lavin
Ben Noordhuis
David Halls
Jackson Tian
Carl Lei
Jackson Tian
James Lal
Ilya Shaisultanov
Mihai Potra
Matteo Collina
Anna Henningsen