When writing bad data to EncryptedStream it'll first get to the
ClientHello parser, and, only after it will refuse it, to the OpenSSL.
But ClientHello parser has limited buffer and therefore write could
return `bytes_written` < `incoming_bytes`, which is not the case when
working with OpenSSL.
After such errors ClientHello parser disables itself and will
pass-through all data to the OpenSSL. So just trying to write data one
more time will throw the rest into OpenSSL and let it handle it.
Otherwise, writing an empty string causes the whole program to grind to
a halt when piping data into http messages.
This wasn't as much of a problem (though it WAS a bug) in 0.8 and
before, because our hyperactive 'drain' behavior would mean that some
*previous* write() would probably have a pending drain event, and cause
things to start moving again.
This commit adds an optimization to the HTTP client that makes it
possible to:
* Pack the headers and the first chunk of the request body into a
single write().
* Pack the chunk header and the chunk itself into a single write().
Because only one write() system call is issued instead of several,
the chances of data ending up in a single TCP packet are phenomenally
higher: the benchmark with `type=buf size=32` jumps from 50 req/s to
7,500 req/s, a 150-fold increase.
This commit removes the check from e4b716ef that pushes binary encoded
strings into the slow path. The commit log mentions that:
We were assuming that any string can be concatenated safely to
CRLF. However, for hex, base64, or binary encoded writes, this
is not the case, and results in sending the incorrect response.
For hex and base64 strings that's certainly true but binary strings
are 'das Ding an sich': string.length is the same before and after
decoding.
Fixes#5528.
When an internal api needs a timeout, they should use
timers._unrefActive since that won't hold the loop open. This solves
the problem where you might have unref'd the socket handle but the
timeout for the socket was still active.
Previously one could write anywhere in a buffer pool if they accidently
got their offset wrong. Mainly because the cc level checks only test
against the parent slow buffer and not against the js object properties.
So now we check to make sure values won't go beyond bounds without
letting the dev know.
Test case:
var t = setInterval(function() {}, 1);
process.nextTick(t.unref);
Output:
Assertion failed: (args.Holder()->InternalFieldCount() > 0),
function Unref, file ../src/handle_wrap.cc, line 78.
setInterval() returns a binding layer object. Make it stop doing that,
wrap the raw process.binding('timer_wrap').Timer object in a Timeout
object.
Fixes#4261.
Pretty much everything assumes strings to be utf-8, but crypto
traditionally used binary strings, so we need to keep the default
that way until most users get off of that pattern.
If there is an encoding, and we do 'stream.push(chunk, enc)', and the
encoding argument matches the stated encoding, then we're converting from
a string, to a buffer, and then back to a string. Of course, this is a
completely pointless bit of work, so it's best to avoid it when we know
that we can do so safely.
Commit 9352c19 ("child_process: don't emit same handle twice") trades
one bug for another.
Before said commit, a handle was sometimes delivered with messages it
didn't belong to.
The bug fix introduced another bug that needs some explaining. On UNIX
systems, handles are basically file descriptors that are passed around
with the sendmsg() and recvmsg() system calls, using auxiliary data
(SCM_RIGHTS) as the transport.
node.js and libuv depend on the fact that none of the supported systems
ever emit more than one SCM_RIGHTS message from a recvmsg() syscall.
That assumption is something we should probably address someday for the
sake of portability but that's a separate discussion.
So, SCM_RIGHTS messages are never coalesced. SCM_RIGHTS and normal
messages however _are_ coalesced. That is, recvmsg() might return this:
recvmsg(); // { "message-with-fd", "message", "message" }
The operating system implicitly breaks pending messages along
SCM_RIGHTS boundaries. Most Unices break before such messages but Linux
also breaks _after_ them. When the sender looks like this:
sendmsg("message");
sendmsg("message-with-fd");
sendmsg("message");
Then on most Unices the receiver sees messages arriving like this:
recvmsg(); // { "message" }
recvmsg(); // { "message-with-fd", "message" }
The bug fix in commit 9352c19 assumes this behavior. On Linux however,
those messages can also come in like this:
recvmsg(); // { "message", "message-with-fd" }
recvmsg(); // { "message" }
In other words, it's incorrect to assume that the file descriptor is
always attached to the first message. This commit makes node wise up.
Fixes#5330.
When developer calls setBreakpoint with an unknown script name,
we convert the script name into regular expression matching all
paths ending with given name (name can be a relative path too).
To create such breakpoint in V8, we use type `scriptRegEx`
instead of `scriptId` for `setbreakpoint` request.
To restore such breakpoint, we save the original script name
send by the user. We use this original name to set (restore)
breakpoint in the new child process.
This is a back-port of commit 5db936d from the master branch.
Fixed a bug in debugger repl where `restart` command did not work
when a custom debug port was specified via command-line option
--port={number}.
File test/simple/helper-debugger-repl.js was extracted
from test/simple/test-debugger-repl.js
Fixes#3740
In the case of pipelined requests, you can have a situation where
the socket gets destroyed via one req/res object, but then trying
to destroy *another* req/res on the same socket will cause it to
call undefined.destroy(), since it was already removed from that
message.
Add a guard to OutgoingMessage.destroy and IncomingMessage.destroy
to prevent this error.
It needs to apply the Transform class when the _readableState,
_writableState, or _transformState properties are accessed,
otherwise things like setEncoding and on('data') don't work
properly.
Also, the methods wrappers are no longer needed, since they're only
problematic because they access the undefined properties.
4716dc6 made assert.equal() and related functions work better by
generating a better toString() from the expected, actual, and operator
values passed to fail(). Unfortunately, this was accomplished by putting
the generated message into the error's `name` property. When you passed
in a custom error message, the error would put the custom error into
`name` *and* `message`, resulting in helpful string representations like
"AssertionError: Oh no: Oh no".
This commit resolves that issue by storing the generated message in the
`message` property while leaving the error's name alone and adding
a regression test so that this doesn't pop back up later.
Closes#5292.
I broke dgram.Socket#bind(port, cb) almost a year ago in 332fea5a but
it wasn't until today that someone complained and none of the tests
caught it because they all either specify the address or omit the
callback.
Anyway, now it works again and does what you expect: it binds the
socket to the "any" address ("0.0.0.0" for IPv4 and "::" for IPv6.)
Fix#5272
The consumption of a readable stream is a dance with 3 partners.
1. The specific stream Author (A)
2. The Stream Base class (B), and
3. The Consumer of the stream (C)
When B calls the _read() method that A implements, it sets a 'reading'
flag, so that parallel calls to _read() can be avoided. When A calls
stream.push(), B knows that it's safe to start calling _read() again.
If the consumer C is some kind of parser that wants in some cases to
pass the source stream off to some other party, but not before "putting
back" some bit of previously consumed data (as in the case of Node's
websocket http upgrade implementation). So, stream.unshift() will
generally *never* be called by A, but *only* called by C.
Prior to this patch, stream.unshift() *also* unset the state.reading
flag, meaning that C could indicate the end of a read, and B would
dutifully fire off another _read() call to A. This is inappropriate.
In the case of fs streams, and other variably-laggy streams that don't
tolerate overlapped _read() calls, this causes big problems.
Also, calling stream.shift() after the 'end' event did not raise any
kind of error, but would cause very strange behavior indeed. Calling it
after the EOF chunk was seen, but before the 'end' event was fired would
also cause weird behavior, and could lead to data being lost, since it
would not emit another 'readable' event.
This change makes it so that:
1. stream.unshift() does *not* set state.reading = false
2. stream.unshift() is allowed up until the 'end' event.
3. unshifting onto a EOF-encountered and zero-length (but not yet
end-emitted) stream will defer the 'end' event until the new data is
consumed.
4. pushing onto a EOF-encountered stream is now an error.
So, if you read(), you have that single tick to safely unshift() data
back into the stream, even if the null chunk was pushed, and the length
was 0.
Don't scan the whole string for a "NODE_" substring, just check that
the string starts with the expected prefix.
This is a reprise of dbbfbe7 but this time for the child_process
module.
Don't scan the whole string for a "NODE_CLUSTER_" substring, just check
that the string starts with the expected prefix. The linear scan was
causing a noticeable (but unsurprising) slowdown on messages with a
large .cmd string property.
Buffer.byteLength() works only for string inputs. Thus, when connection
has pending Buffer to write, it should just use it's length instead of
throwing exception.
Since 049903e, an end callback could be called before a write
callback if end() is called before the write is done. This patch
resolves the issue.
In collaboration with @gne
Fixes felixge/node-formidable#209
Fixes#5215
We were assuming that any string can be concatenated safely to
CRLF. However, for hex, base64, or binary encoded writes, this
is not the case, and results in sending the incorrect response.
An unusual edge case, but certainly a bug.
RFC 6125 explicitly states that a client "MUST NOT seek a match
for a reference identifier of CN-ID if the presented identifiers
include a DNS-ID, SRV-ID, URI-ID, or any application-specific
identifier types supported by the client", but it MAY do so if
none of the mentioned identifier types (but others) are present.
If an http response has an 'end' handler that throws, then the socket
will never be released back into the pool.
Granted, we do NOT guarantee that throwing will never have adverse
effects on Node internal state. Such a guarantee cannot be reasonably
made in a shared-global mutable-state side-effecty language like
JavaScript. However, in this case, it's a rather trivial patch to
increase our resilience a little bit, so it seems like a win.
There is no semantic change in this case, except that some event
listeners are removed, and the `'free'` event is emitted on nextTick, so
that you can schedule another request which will re-use the same socket.
From the user's point of view, there should be no detectable difference.
Closes#5107
The v0.8 Stream.pipe() method automatically destroyed the destination
stream whenever the src stream closed. However, this caused a lot of
problems, and was removed by popular demand. (Many userland modules
still have a no-op destroy() method just because of this.) It was also
very hazardous because this would be done even if { end: false } was
passed in the pipe options.
In v0.10, we decided that the 'close' event and destroy() method are
application-specific, and pipe() doesn't automatically call destroy().
However, TLS actually depended (silently) on this behavior. So, in this
case, we should just go ahead and destroy the thing when close happens.
Closes#5145
In cases where a stream may have data added to the read queue before the
user adds a 'readable' event, there is never any indication that it's
time to start reading.
True, there's already data there, which the user would get if they
checked However, as we use 'readable' event listening as the signal to
start the flow of data with a read(0) call internally, we ought to
trigger the same effect (ie, emitting a 'readable' event) even if the
'readable' listener is added after the first emission.
To avoid confusing weirdness, only the *first* 'readable' event listener
is granted this privileged status. After we've started the flow (or,
alerted the consumer that the flow has started) we don't need to start
it again. At that point, it's the consumer's responsibility to consume
the stream.
Closes#5141
Fedor Indutny
Nathan Zadoks
isaacs
Ben Noordhuis
Timothy J Fontaine
Trevor Norris
Daniel Moore
Miroslav Bajtoš
Ryan Doenges
Łukasz Walukiewicz
Andreas Madsen
Tobias Müllerleile
Rafael Garcia
Mitar
Nathan Rajlich
wicked