This commits adds support for readableHighWaterMark and
writableHighWaterMark in Duplex stream, so that they can be set without
accessing the internal state.
Fixes: https://github.com/nodejs/node/issues/14555
PR-URL: https://github.com/nodejs/node/pull/14636
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
In anticipation of stricter linting for indentation issues, modify
ternary operators in lib that do not conform with the expected ESLint
settings.
PR-URL: https://github.com/nodejs/node/pull/14078
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
With the new Ignition+TurboFan pipeline, the instanceof fast-path can be
missed if the right-hand side needs a TDZ check, i.e. is const declared
on a surrounding scope. This doesn't apply to Node 8 at this point,
where it's at V8 5.8, but it applies as soon as V8 5.9 rolls. There's
work going on in Ignition (and TurboFan) to optimize those TDZ checks
properly, but those changes will land in V8 6.1, so might not end up in
Node 8.
One way to work-around this in Node core for now is to use var instead
of const for those right-hand sides for instanceof for now, especially
Buffer in case of streams. This is not beautiful, but proper ducktape.
Improves readable-bigread.js by ~23% with Node LKGR.
PR-URL: https://github.com/nodejs/node/pull/13403
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Calvin Metcalf <calvin.metcalf@gmail.com>
Adds destroy() and _destroy() methods to Readable, Writable, Duplex
and Transform. It also standardizes the behavior and the implementation
of destroy(), which has been inconsistent in userland and core.
This PR also updates all the subsystems of core to use the new
destroy().
PR-URL: https://github.com/nodejs/node/pull/12925
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Calvin Metcalf <calvin.metcalf@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Fix the uncommon situation when a readable stream is piped twice into
the same destination stream, and then unpiped once.
Previously, the `unpipe` event handlers weren’t able to tell whether
they were corresponding to the “right” conceptual pipe that was being
removed; this fixes this by adding a counter to the `unpipe` event
handler and only removing a single piping destination at most.
Fixes: https://github.com/nodejs/node/issues/12718
PR-URL: https://github.com/nodejs/node/pull/12746
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Delete invalid parameter.
Fixes: https://github.com/nodejs/node/issues/8153
PR-URL: https://github.com/nodejs/node/pull/12767
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: David Cai <davidcai1993@yahoo.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Currently when the destination emits an 'error', 'finish' or 'close'
event the pipe calls unpipe to emit 'unpipe' and trigger the clean up
of all it's listeners.
When the source emits an 'end' event without {end: false} it calls
end() on the destination leading it to emit a 'close', this will again
lead to the pipe calling unpipe. However the source emitting an 'end'
event along side {end: false} is the only time the cleanup gets ran
directly without unpipe being called. This fixes that so the 'unpipe'
event does get emitted and cleanup in turn gets ran by that event.
Fixes: https://github.com/nodejs/node/issues/11837
PR-URL: https://github.com/nodejs/node/pull/11876
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
It seems that the comment for sync flag of ReadableState is
copied from WritableState without modification.
PR-URL: https://github.com/nodejs/node/pull/11139
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
This is to be consistent with the other operators and helps
understanding the context when the code is grepped.
PR-URL: https://github.com/nodejs/node/pull/10213
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Teddy Katz <teddy.katz@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Since 2e568d9 there is a bug where unpiping a stream
from a readable stream that has `_readableState.pipesCount > 1`
will cause it to remove the first stream in the
`_.readableState.pipes` array no matter where in the list the
`dest` stream was.
This patch corrects that problem.
PR-URL: https://github.com/nodejs/node/pull/9171
Fixes: https://github.com/nodejs/node/issues/9170
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
This is a known de-opt. It may not be 100% necessary in all cases but it
seems like a decent enough idea to avoid it.
PR-URL: https://github.com/nodejs/node/pull/8873
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Improve message when tranform._transform() method is not implemented
Improve error message when Readable._read() is not implemented
Remove extra word in err msg when Writable._write() when not implemented
Remove extra word in err msg when Transform._transform() when not implemented
PR-URL: https://github.com/nodejs/node/pull/8801
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
This removes the cached check for EE.prototype.prependListener
because we can't have nice things. More specifically some
libraries will bundle their own event emitter implementation.
PR-URL: https://github.com/nodejs/node/pull/8018
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This change is in preparation for lint-enforced brace style.
PR-URL: https://github.com/nodejs/node/pull/7630
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Guard against the call to write() inside pipe's ondata pushing more data
back onto the Readable, thus causing ondata to be called again.
This is fine but results in awaitDrain being increased more than once.
The problem with that is when the destination does drain, only a single
'drain' event is emitted, so awaitDrain in this case will never reach
zero and we end up with a permanently paused stream.
Fixes: https://github.com/nodejs/node/issues/7278
PR-URL: https://github.com/nodejs/node/pull/7292
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
read() performance is improved most by switching from an array to
a linked list for storing buffered data. However, other changes that
also contribute include: making some hot functions inlinable, faster
read() argument checking, and misc code rearrangement to avoid
unnecessary code execution.
PR-URL: https://github.com/nodejs/node/pull/7077
Reviewed-By: Calvin Metcalf <calvin.metcalf@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reset the `readableState.awaitDrain` counter after manual calls to
`.resume()`.
What might happen otherwise is that a slow consumer at the end of the
pipe could end up stalling the piping in the following scenario:
1. The writable stream indicates that its buffer is full.
2. This leads the readable stream to `pause()` and increase its
`awaitDrain` counter, which will be decreased by the writable’s next
`drain` event.
3. Something calls `.resume()` manually.
4. The readable continues to pipe to the writable, but once again
the writable stream indicates that the buffer is full.
5. The `awaitDrain` counter is thus increased again, but since it has
now been increased twice for a single piping destination, the next
`drain` event will not be able to reset `awaitDrain` to zero.
6. The pipe is stalled and no data is passed along anymore.
The solution in this commit is to reset the `awaitDrain` counter to
zero when `resume()` is called.
Fixes: https://github.com/nodejs/node/issues/7159
PR-URL: https://github.com/nodejs/node/pull/7160
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
A handful of modules (including readable-streams) make
inappropriate use of the internal _events property. One
such use is to prepend an event listener to the front
of the array of listeners.
This adds EE.prototype.prependListener() and
EE.prototype.prependOnceListener() methods to add handlers
to the *front* of the listener array.
Doc update and test case is included.
Fixes: https://github.com/nodejs/node/issues/1817
PR-URL: https://github.com/nodejs/node/pull/6032
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
In 68990948fe (https://github.com/nodejs/node/pull/2325),
the conditions for increasing `readableState.awaitDrain` when
writing to a piping destination returns false were changed so
that they could not actually be met, effectively leaving
`readableState.awaitDrain` with a constant value of 0.
This patch changes the conditions to testing whether the
stream for which `.write()` returned false is still a piping
destination, which was likely the intention of the original
patch.
Fixes: https://github.com/nodejs/node/issues/5820
Fixes: https://github.com/nodejs/node/issues/5257
PR-URL: https://github.com/nodejs/node/pull/6023
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Readable.resume() schedules the resume operation onto the next tick,
whereas pause() has immediate effect. This means that in a sequence
stream.resume();
stream.pause();
.. the 'pause' event will be triggered before the resume operation
is performed.
For process.stdin, we are relying on the 'pause' event to stop reading
on the underlying handle. This fix ensures that reads are started and
stopped in the same order as resume() and pause() are called.
PR-URL: https://github.com/nodejs/node/pull/5776
Reviewed-By: cjihrig - Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: jasnell - James M Snell <jasnell@gmail.com>
Several changes:
* Soft-Deprecate Buffer() constructors
* Add `Buffer.from()`, `Buffer.alloc()`, and `Buffer.allocUnsafe()`
* Add `--zero-fill-buffers` command line option
* Add byteOffset and length to `new Buffer(arrayBuffer)` constructor
* buffer.fill('') previously had no effect, now zero-fills
* Update the docs
PR-URL: https://github.com/nodejs/node/pull/4682
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Stephen Belanger <admin@stephenbelanger.com>
Before this commit, it was possible to push a partial character
to a readable stream where it was decoded as an empty string and
then added to the internal buffer. This caused the stream to not
emit any data, even when the rest of the character bytes were pushed
separately, because of a non-zero length check of the first chunk in
the internal buffer.
Fixes: https://github.com/nodejs/node/issues/5223
PR-URL: https://github.com/nodejs/node/pull/5226
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
`lib/_stream_readable.js` contained three instances of `var`
declarations occurring twice in the same scope. Refactored to `const` or
`let` as appropriate.
PR-URL: https://github.com/nodejs/node/pull/4816
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
ReadableState has the resumeScheduled property that helps determine if
a stream should be resumed. It was not assigned in the constructor.
When stream.resume is called on a readable stream that is not flowing,
it is set to true. This changes the property map of the ReadableState
which can cause a deopt in onEofChunk and needMoreData.
PR-URL: https://github.com/nodejs/node/pull/4761
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Add a bytesRead property for readable is
useful in some use cases.
When user want know how many bytes read of
readable, need to caculate it in userland.
If encoding is specificed, get the value is
very slowly.
PR-URL: https://github.com/nodejs/node/pull/4372
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
As of 34b535f4c, test-child-process-flush-stdio was failing
on CentOS 5 systems in CI due to the change in stream state
checking in `child_process`. This commit fixes those failures
by making readable streams less eager in setting their readable
flag on EOF.
Fixes: https://github.com/nodejs/node/issues/4125
PR-URL: https://github.com/nodejs/node/pull/4141
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
These properties were initially used to determine stream status
back in node v0.8 and earlier. Since streams2 however, these
properties were *always* true, which can be misleading for
example if you are trying to immediately determine whether
a Writable stream is still writable or not (to avoid a "write after
end" exception).
PR-URL: https://github.com/nodejs/node/pull/4083
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
This commit fixes some error messages that are not consistent with
some general rules which most of the error messages follow.
PR-URL: https://github.com/nodejs/node/pull/3374
Reviewed-By: Roman Reiss <me@silverwind.io>
Avoids doing a buffer.concat on the internal buffer
when that array has only a single thing in it.
Reviewed-By: Chris Dickinson <chris@neversaw.us>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/3300
The `events` module already exports `EventEmitter` constructor function
So, we don't have to use `events.EventEmitter` to access it.
Refer: https://github.com/nodejs/node/pull/2896
PR-URL: https://github.com/nodejs/node/pull/2921
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Now parts of our public and public-ish APIs fall back to old-style
listenerCount() if the emitter does not have a listenerCount function.
Fixes: https://github.com/nodejs/node/issues/2655
Refs: 8f58fb92ff
PR-URL: https://github.com/nodejs/node/pull/2661
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
roundUpToNextPowerOf2() does more than just rounding up to the next
power of two. Rename it to computeNewHighWaterMark().
PR-URL: https://github.com/nodejs/node/pull/2479
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Don't iterate over all 32 bits, use some hacker's delight bit twiddling
to compute the next power of two.
The logic can be reduced to `n = 1 << 32 - Math.clz32(n)` but then it
can't easily be backported to v2.x; Math.clz32() was added in V8 4.3.
PR-URL: https://github.com/nodejs/node/pull/2479
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
The high watermark is capped at 8 MB, not 128 MB like the comment
in lib/_stream_readable.js said.
PR-URL: https://github.com/nodejs/node/pull/2479
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
As per the discussion in #734, this patch deprecates the usage of
`EventEmitter.listenerCount` static function in the docs, and introduces
the `listenerCount` function in the prototype of `EventEmitter` itself.
PR-URL: https://github.com/nodejs/node/pull/2349
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Guy Margalit
Rich Trott
Anna Henningsen
Benedikt Meurer
Brian White
Matteo Collina
Tobias Nießen
Leo
Christopher Luke
James M Snell
Wang Xinyong
Michaël Zasso
Myles Borins
Italo A. Casas
Calvin Metcalf
David Halls
Evan Lucas
Alexis Campailla
cjihrig
Jackson Tian
micnic
Sakthipriyan Vairamani
Jeremiah Senkpiel
Ben Noordhuis
Roman Reiss
Yosuke Furukawa
Yazhong Liu