This is commit 01ee551, except for the DataView type this time.
Make the behavior of DataView consistent with that of typed arrays:
make a copy of the backing store.
Otherwise sockets that are 'finish'ed won't be unpiped and `writing to
ended stream` error will arise.
This might sound unrealistic, but it happens in net.js. When
`socket.allowHalfOpen === false`, EOF will cause `.destroySoon()` call which
ends the writable side of net.Socket.
Check that having a worker bind to a port that's already taken doesn't
leave the master process in a confused state. Releasing the port and
trying again should Just Work[TM].
Follow browser behavior, only share the backing store when it's a
ArrayBuffer. That is:
var abuf = new ArrayBuffer(32);
var a = new Int8Array(abuf);
var b = new Int8Array(abuf);
a[0] = 0;
b[0] = 1;
assert(a[0] === b[0]); // a and b share memory
But:
var a = new Int8Array(32);
var b = new Int8Array(a);
a[0] = 0;
b[0] = 1;
assert(a[0] !== b[0]); // a and b don't share memory
The typed arrays spec allows both `a[0] === b[0]` and `a[0] !=== b[0]`
but Chrome and Firefox implement the behavior where memory is not
shared.
Copying the memory is less efficient but let's do it anyway for the
sake of the Principle of Least Surprise.
Fixes#4714.
This is more backwards-compatible with stream1 streams like `fs.WriteStream`
which would allow a callback function to be passed in as the only argument.
Closes#4719.
Inform V8 that the zlib context object is tied to a large off-heap buffer.
This makes the GC run more often (in theory) and improves the accuracy of
--trace_external_memory.
In zlibBuffer(), don't wait for the garbage collector to reclaim the zlib memory
but release it manually. Reduces memory consumption by a factor of 10 or more
with some workloads.
Test case:
function f() {
require('zlib').deflate('xxx', g);
}
function g() {
setTimeout(f, 5);
}
f();
Observe RSS memory usage with and without this commit. After 10,000 iterations,
RSS stabilizes at ~35 MB with this commit. Without, RSS is over 300 MB and keeps
growing.
Cause: whenever the JS object heap hits the high-water mark, the V8 GC sweeps
it clean, then tries to grow it in order to avoid more sweeps in the near
future. Rule of thumb: the bigger the JS heap, the lazier the GC can be.
A side effect of a bigger heap is that objects now live longer. This is harmless
in general but it affects zlib context objects because those are tied to large
buffers that live outside the JS heap, on the order of 16K per context object.
Ergo, don't wait for the GC to reclaim the memory - it may take a long time.
Fixes#4172.
Move the implementation to C++ land. This is similar to commit 3f65916
but this time for the write() function and the Buffer(s, 'hex')
constructor.
Speeds up the benchmark below about 24x (2.6s vs 1:02m).
var s = 'f';
for (var i = 0; i < 26; ++i) s += s; // 64 MB
Buffer(s, 'hex');
If the NODE_DEBUGGER_TIMEOUT environment variable is set, then use
that as the number of ms to wait for the debugger to start.
This is primarily to work around a race condition that almost never
happens in real usage with the debugger, but happens EVERY FRACKING
TIME when the debugger tests run as part of 'make test'.
Move the implementation to C++ land. The old JS implementation used
string concatenation, was dog slow and consumed copious amounts of
memory for large buffers. Example:
var buf = Buffer(0x1000000); // 16 MB
buf.toString('hex') // Used 3+ GB of memory.
The new implementation operates in O(n) time and space.
Fixes#4700.
Those values, if passed to the _read() cb, will not signal an EOF. Only
null or undefined will mark the end of data, and trigger the end event.
However, great care must be taken if you are returning an empty string
or buffer! There must be some other thing somewhere that will trigger
a read() call, because there will never be a readable event fired later.
This is in preparation for CryptoStreams being ported to streams2, where
it is safe to simply stop reading, because the crypto cycle process will
cause it to read(0) again at some future date.
Make lines ending \r\n emit one 'line' event, not two (where the second
one is an empty string).
This adds a new keypress name: 'return' (as in: 'carriage return').
Fixes#3305.
This commit breaks simple/test-stream2-stderr-sync. Need to figure out
a better way, or just accept that `(function W(){stream.write(b,W)})()`
is going to be noisy. People should really be using the `'drain'` event
for this use-case anyway.
This reverts commit 02f7d1bfd8.
Always defer the _write callback. The optimization here was only
relevant in some oddball edge cases that we don't actually care about.
Our benchmarks confirm that just always deferring the Socket._write cb
is perfectly fine to do, and in some cases, even slightly more
performant.
When a datagram socket hasn't been bound yet, node will defer `send()`
operations until binding has completed. Before this patch a `listening`
listener would be installed every time `send` was called. This triggered
an EventEmitter leak warning when more than 10 packets were sent in a
tight loop. Therefore switch to using a single `listening` listener, and
use an array to enqueue outbound packets.
The refactor in b43e544140 to use
stream.push() in Transform inadvertently caused it to immediately
consume all the written data, regardless of whether or not the readable
side was being consumed.
Only pull data through the _transform() process when the readable side
is being consumed.
Fix#4667
TCPWrap::Initialize() and PipeWrap::Initialize() should be called before
any data will be read from received socket. But, because of lazy
initialization of these bindings, Initialize() method isn't called.
Init bindings manually upon socket receiving.
See #4669
Fix the following OOM error in pummel/test-net-connect-memleak
and pummel/test-tls-connect-memleak:
FATAL ERROR: CALL_AND_RETRY_0 Allocation failed - process out of
memory
Commit v8/v8@91afd39 increases the size of the deoptimization table
to the extent that a 64M float array pushes it over the brink. Switch
to SMIs so it stays below the limit.
pummel/test-net-connect-memleak is still failing albeit with a different
error this time. Needs further investigation.
=== release test-net-connect-memleak ===
Path: pummel/test-net-connect-memleak
-64 kB reclaimed
assert.js:102
throw new assert.AssertionError({
^
AssertionError: false == true
at done [as _onTimeout] (/home/bnoordhuis/src/nodejs/master/
test/pummel/test-net-connect-memleak.js:48:3)
at Timer.listOnTimeout [as ontimeout] (timers.js:110:15)
at process._makeCallback (node.js:306:20)
If the end argument is omitted or not a number, make it default to
the end of the buffer, not zero.
Ideally, it should not matter what it defaults to because the JS shim
in lib/buffer.js should handle that but there are still several places
in node.js core that secrete SlowBuffers, hence Buffer::Copy() gets
called without going through Buffer.prototype.copy() first.
It's segfaulting in release mode and asserting in debug mode:
#
# Fatal error in ../../deps/v8/src/api.h, line 297
# CHECK(allow_empty_handle || that != __null) failed
#
This reverts commit 99f0b022d5.
Before sending handle to another process using uv_write2(), it should be
referenced to prevent it from being GCed before AfterWrite() will be
called.
see #4599
mainly to allow native addons to export single functions on `exports`
rather than being restricted to operating on an existing `exports`
object.
added link to addons repo in docs
mainly to allow native addons to export single functions on
rather than being restricted to operating on an existing
object.
Init functions now receive exports as the first argument, like
before, but also the module object as the second argument, if they
support it.
Related to #4634
cc: @rvagg
isaacs
Ben Noordhuis
Fedor Indutny
Bryan Cantrill
Nathan Rajlich
Bert Belder
Rick Yakubowski
Rod Vagg