Remove unnecessary `setImmediate()` that causes a minor race condition.
Stop the test after 3 occurrences rather than 5 to allow for slower
hosts running the test in parallel with other tests.
Fixes: https://github.com/nodejs/node/issues/4559
PR-URL: https://github.com/nodejs/node/pull/4599
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Make default `clientError` behavior (close socket immediately)
overridable. With this APIs it is possible to write a custom error
handler, and to send, for example, a 400 HTTP response.
http.createServer(...).on('clientError', function(err, socket) {
socket.end('HTTP/1.1 400 Bad Request\r\n\r\n');
socket.destroy();
});
Fix: #4543
PR-URL: https://github.com/nodejs/node/pull/4557
Reviewed-By: Brian White <mscdex@mscdex.net>
`clientError` will have `http.Server`-specific behavior, and we don't
want to shadow it in `tls.Server`.
PR-URL: https://github.com/nodejs/node/pull/4557
Reviewed-By: Brian White <mscdex@mscdex.net>
Remove unused vars in tests
PR-URL: https://github.com/nodejs/node/pull/4536
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
1c85849973 "fixed"
test-domain-exit-dispose-again by changing its logic to test that
process.domain was cleared properly in case an error was thrown from a
timer's callback.
However, it became clear when reviewing a recent change that refactors
lib/timers.js that it was not quite the intention of the original test.
Thus, this change adds the original implementation of
test-domain-exit-dispose-again back, with comments that make its
implementation easier to understand.
It also preserve the changes made by
1c85849973, but it moves them to a new
test file named test-timers-reset-process-domain-on-throw.js.
PR: #4256
PR-URL: https://github.com/nodejs/node/pull/4256
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Remove all remaining unused variables from tests in test/parallel.
PR-URL: https://github.com/nodejs/node/pull/4511
Reviewed-By: James M Snell<jasnell@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
This change adds a new event handler to the `error` event of the socket
after it has been used by the http_client.
The purpose of this change is to catch errors on *keep alived*
connections from idle sockets that otherwise will cause an uncaugh error
event on the application.
Fix: #3595
PR-URL: https://github.com/nodejs/node/pull/4482
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Use common.platformTimeout() to fix flaky
test-stream2-readable-empty-buffer-no-eofi on Raspberry Pis.
Fixes: https://github.com/nodejs/node/issues/4493
PR-URL: https://github.com/nodejs/node/pull/4516
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: James M Snell<jasnell@gmail.com>
Three tests designated as flaky on Linux have not failed on the
continuous integration server in a long time. Removing flaky designation
for these tests.
Fixes: https://github.com/nodejs/node/issues/4446
PR-URL: https://github.com/nodejs/node/pull/4519
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
`setTimeout()`, `setInterval()` and `setIntermediate` currently
throw errors when receiving non-function objects as their first
argument, but only do so when trying to execute the callback,
i.e. after the waited time has passed. This may complicate
debugging when a lot of calls to `setTimeout()`/etc. are involved,
so failing as early as possible seems like a good idea.
`setTimeout()` historically ignored an falsy first
argument, while the other functions do not and throw instead.
This patch changes this behaviour to make all three match and
adds remarks in the corresponding documentation.
PR-URL: https://github.com/nodejs/node/pull/4362
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
test-child-process-fork-net2.js checks that things happen within
certain time constraints, thus doubling as a benchmark test in addition
to a functionality test.
This change removes the time check, as it was causing the test to fail
on SmartOS and Windows (and possibly elsewhere) when the tests were
run in parallel on CI. There is no guarantee that other tests won't
consume enough resources to slow this test down, so don't check the time
constraints (beyond the generous timeout that the test is given by
test.py in the first place, of course).
If we want to do benchmark/performance tests, we should keep them
separate from pure functionality tests. The time check may have been a
remnant of the distant past when Node.js was much slower. It predates
io.js
Ref: https://github.com/nodejs/node/pull/4476
PR-URL: https://github.com/nodejs/node/pull/4494
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Refactor test to remove unnecessary booleans and one unnecesary timer.
Instead, throw Error objects where appropriate and rely on
common.mustCall().
The timer seemed to be the source of an issue when parallelizing tests.
Ref: https://github.com/nodejs/node/pull/4476#issuecomment-168080875
PR-URL: https://github.com/nodejs/node/pull/4490
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
test-fs-realpath.js was writing files to the fixture dir. This changes
it to use the temp directory instead. This also replaces some of the
string concatenation for paths with uses of path.join() and
path.relative().
PR-URL: https://github.com/nodejs/node/pull/4489
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Many tests use require() to import modules that subsequently never gets
used. This removes those imports and, in a few cases, removes other
unused variables from tests.
PR-URL: https://github.com/nodejs/node/pull/4475
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Add a comment to clarify how the tests work and their purpose.
Also removes unnecessary assignment of domain module to a variable.
PR-URL: https://github.com/nodejs/node/pull/4474
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Julien Gilli <jgilli@fastmail.fm>
Improves the message when an assertion fires in the
test-net-pipe-connect-errors so that it indicates the incorrect value
received rather than merely reporting that the value is incorrect.
PR-URL: https://github.com/nodejs/node/pull/4461
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
This fixes CI failures for test-net-pipe-connect-errors on Raspberry Pi
devices.
PR-URL: https://github.com/nodejs/node/pull/4478
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: James M Snell <jasnell@gmail.com>
Many test modules load assert but do not use it. This change removes
those instances.
It also removes a handful of other unused variables when they were
nearby.
PR-URL: https://github.com/nodejs/node/pull/4438
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Since headers are stored in an empty literal object ({}) instead
of an object created with Object.create(null), care must be taken
with property names inherited from Object. Currently there are
only functions inherited, so we can safely check for existing
strings instead.
Fixes: https://github.com/nodejs/node/issues/4456
PR-URL: https://github.com/nodejs/node/pull/4460
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Minwoo Jung <jmwsoft@gmail.com>
With the introduction of temporary paths in the test runner
realpath tests would bail in scenarios where the temporary folder
wasn't in the same directory as the source code.
PR-URL: https://github.com/nodejs/node/pull/4477
Reviewed-By: Rich Trott <rtrott@gmail.com>
A few tests assumed that temp dirs always lived in the same
parent folder as fixtures. Make these use `common.tmpDir` instead.
PR-URL: https://github.com/nodejs/node/pull/3325
Reviewed-By: Joao Reis <reis@janeasystems.com>
Remove a handful of variables that are declared but never used in the
tests for the net module.
PR-URL: https://github.com/nodejs/node/pull/4430
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
In addition to removing unused vars, this also fixes an instance where
booleans were set presumably to check something but then never used.
This now confirms that the events that were setting the booleans are
fired.
PR-URL: https://github.com/nodejs/node/pull/4425
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
On single core Windows systems, process.send() would cause an
EPIPE because of the ordering of the IPC channel disconnect and
the process.send().
The test was originally only relevant for non-Windows platforms,
so this commit merely skips the test on Windows.
Fixes: https://github.com/nodejs/node/issues/4450
PR-URL: https://github.com/nodejs/node/pull/4457
Reviewed-By: Rich Trott <rtrott@gmail.com>
Before this commit, it was possible on Windows for the server's
'connection' handler to be called *after* the client socket's
'connect' handler. This caused the 'message' event to be missed
and the test would never end (timing out in CI). This problem
was more easily reproducible on a low resource (slow CPU)
Windows (2012r2) installation.
This commit waits until both handlers have been called before
sending the handle to the master process.
Fixes: https://github.com/nodejs/node/issues/3957
PR-URL: https://github.com/nodejs/node/pull/4444
Reviewed-By: Rich Trott <rtrott@gmail.com>
Windows would die with ECONNRESET most times when running
this particular test. This commit makes handling these errors
more tolerable.
PR-URL: https://github.com/nodejs/node/pull/4442
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Some of the TLS tests have variables that do not get used. This removes
those variables.
PR-URL: https://github.com/nodejs/node/pull/4424
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
The http tests seem especially prone to including unused variables.
This change removes them.
PR-URL: https://github.com/nodejs/node/pull/4422
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
It is possible that the internal hnadleMessage() might try to send to
a channel that has been closed. The result can be an AssertionError.
Guard against this.
Fixes: https://github.com/nodejs/node/issues/4205
PR-URL: https://github.com/nodejs/node/pull/4418
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
common.js needs to be loaded in all tests so that there is checking
for variable leaks and possibly other things. However, it does not
need to be assigned to a variable if nothing in common.js is referred
to elsewhere in the test.
PR-URL: https://github.com/nodejs/node/pull/4408
Reviewed-By: James M Snell <jasnell@gmail.com>
`aethrow` is defined as a function returned from makeBlock() but the
function is never used and the call to makeBlock() does not run any
tests.
PR-URL: https://github.com/nodejs/node/pull/4405
Reviewed-By: James M Snell <jasnell@gmail.com>
A number of tests in `test/parallel` were importing the `util` module
via `require()` but not using `util` for anything. This removes those
`require()` statements.
PR-URL: https://github.com/nodejs/node/pull/4397
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Make sure the server is not closed until both responses have been
received.
PR-URL: https://github.com/nodejs/node/pull/3958
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Check the stderr output in the `close` event as it's not guaranteed to
be fully available when the `exit` event is fired.
PR: #4364
PR-URL: https://github.com/nodejs/node/pull/4364
Reviewed-By: Julien Gilli <jgilli@fastmail.fm>
Without these changes, the pi1-raspbian-wheezy CI node was timing
out on these tests.
PR-URL: https://github.com/nodejs/node/pull/4387
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
https requests with different SNI values should not be sent over the
same connection, even if the `host` is the same. Server may want to
present different certificate or route the incoming TLS connection
differently, depending on the received servername extension.
Fix: https://github.com/nodejs/node/issues/3940
PR-URL: https://github.com/nodejs/node/pull/4389
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
If the deprecated NODE_REPL_HISTORY_FILE is set to default
node history file path ($HOME/.node_repl_history) and the file
doesn't exist, then node creates the file and then crashes when
it tries to parse that file as JSON thinking that it's an older
JSON formatted history file. This fixes that bug.
This patch also prevents node repl from throwing if the old
history file is empty or if $HOME/.node_repl_history is empty.
Fixes: https://github.com/nodejs/node/issues/4102
PR-URL: https://github.com/nodejs/node/pull/4108
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
socket.destroy() triggers a 'close' event from the socket which triggers
the onClose handler of HTTPAgent which calls self.removeSocket(). So by
calling self.removeSocket() prior to socket.destroy() we end up with two
calls to self.removeSocket().
If there are pending requests, removeSocket ends up creating a new socket.
So if there are pending requests, each time a request completes, we tear
down one socket and create two more. So the total number of sockets grows
exponentially and without regard for any maxSockets settings. This was
noticed in https://github.com/nodejs/node/issues/4050. Let's get rid of
the extra calls to removeSocket so we only call it once per completed
request.
PR-URL: https://github.com/nodejs/node/pull/4172
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
assert.deepEqual: when actual and expected are typed arrays,
wrap them in a new Buffer each to increase performance
significantly.
PR-URL: https://github.com/nodejs/node/pull/4330
Fixes: https://github.com/nodejs/node/issues/4294
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
On Windows there can exist some race condition where the
notification of the client's `socket.destroy()` isn't received
before the server writes to the socket. This race condition was
more evident/reproducible on a single core system.
This commit fixes the flakiness by waiting until the server's
connection event handler has been called to destroy the client
socket and perform the server socket write.
Fixes: https://github.com/nodejs/node/issues/4057
PR-URL: https://github.com/nodejs/node/pull/4342
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: João Reis <reis@janeasystems.com>
Load the certificate chain from the PFX file the same as we do it for a
regular certificate chain.
Fix: #4127
PR-URL: https://github.com/nodejs/node/pull/4165
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Improve performance of process._getActiveHandles by sending handles in
batches to JS to be set on the passed Array. Add test to check proper
active handles are returned.
Alter implementation of GetActiveRequests to match GetActiveHandles'
implementation.
PR-URL: https://github.com/nodejs/node/pull/3780
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Rich Trott
Fedor Indutny
Feross Aboukhadijeh
Julien Gilli
José F. Romaniello
Anna Henningsen
Brian White
Johan Bergström
Santiago Gimeno
Max Barinov
Mudit Ameta
Dave
Claudio Rodriguez
Trevor Norris