Call `v8::Isolate::GetCurrent()->LowMemoryNotification()` when
an allocation fails to give V8 a chance to clean up and return
memory before retrying (and possibly giving up).
PR-URL: https://github.com/nodejs/node/pull/8482
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
Provide shortcut `node::CheckedMalloc()` and friends that
replace `node::Malloc()` + `CHECK_NE(·, nullptr);` combinations
in a few places.
PR-URL: https://github.com/nodejs/node/pull/8482
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
Unify the common code of `Utf8Value`, `TwoByteValue`, `BufferValue`
and `StringBytes::InlineDecoder` into one class. Always make the
result zero-terminated for the first three.
This fixes two problems in passing:
* When the conversion of the input value to String fails,
make the buffer zero-terminated anyway. Previously, this would
have resulted in possibly reading uninitialized data in multiple
places in the code. An instance of that problem can be reproduced
by running e.g.
`valgrind node -e 'net.isIP({ toString() { throw Error() } })'`.
* Previously, `BufferValue` copied one byte too much from the source,
possibly resulting in an out-of-bounds memory access.
This can be reproduced by running e.g.
`valgrind node -e \
'fs.openSync(Buffer.from("node".repeat(8192)), "r")'`.
Further minor changes:
* This lifts the `out()` method of `StringBytes::InlineDecoder`
to the common class so that it can be used when using the
overloaded `operator*` does not seem appropiate.
* Hopefully clearer variable names.
* Add checks to make sure the length of the data does not exceed
the allocated storage size, including the possible null terminator.
PR-URL: https://github.com/nodejs/node/pull/6357
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
This patch fixes all the linter errors.
PR-URL: https://github.com/nodejs/node/pull/6105
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Plan 2 bytes instead of 1 byte for the final zero terminator
for UTF-16. This is unlikely to cause real-world problems,
but that ultimately depends on the `malloc` implementation.
The issue can be uncovered by running e.g.
`valgrind node -e "Buffer(65536).fill('a'.repeat(4096), 'utf16le')"`
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
PR-URL: https://github.com/nodejs/node/pull/6330
This makes several changes:
1. Allow path/filename to be passed in as a Buffer on fs methods
2. Add `options.encoding` to fs.readdir, fs.readdirSync, fs.readlink,
fs.readlinkSync and fs.watch.
3. Documentation updates
For 1... it's now possible to do:
```js
fs.open(Buffer('/fs/foo/bar'), 'w+', (err, fd) => { });
```
For 2...
```js
fs.readdir('/fs/foo/bar', {encoding:'hex'}, (err,list) => { });
fs.readdir('/fs/foo/bar', {encoding:'buffer'}, (err, list) => { });
```
encoding can also be passed as a string
```js
fs.readdir('/fs/foo/bar', 'hex', (err,list) => { });
```
The default encoding is set to UTF8 so this addresses the
discrepency that existed previously between fs.readdir and
fs.watch handling filenames differently.
Fixes: https://github.com/nodejs/node/issues/2088
Refs: https://github.com/nodejs/node/issues/3519
PR-URL: https://github.com/nodejs/node/pull/5616
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Can now call fill() using following parameters if value is a String:
fill(string[, start[, end]][, encoding])
And with the following if value is a Buffer:
fill(buffer[, start[, end]])
The encoding is ignored if value is not a String. All other non-Buffer
values are coerced to a uint32.
A multibyte strings will simply be copied into the Buffer until the
number of bytes run out. Meaning partial strings can be left behind:
Buffer(3).fill('\u0222');
// returns: <Buffer c8 a2 c8>
In some encoding cases, such as 'hex', fill() will throw if the input
string is not valid.
PR-URL: https://github.com/nodejs/node/pull/4935
Reviewed-By: James M Snell <jasnell@gmail.com>
The previous commit enables deprecation warnings, this commit fixes
the handful of offending sites where the isolate was not explicitly
being passed around.
PR-URL: https://github.com/iojs/io.js/pull/1565
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Rename `val_` to `string`. The underscore suffix is normally reserved
for data members, not locals, and it's not a great name in the first
place.
PR-URL: https://github.com/iojs/io.js/pull/1042
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
* Remove kStorageSize constant.
* Remove superfluous local variable and reinterpret_cast.
* Reorder data members so the length field and data pointer
(if not the data itself) fit in a single cache line.
PR-URL: https://github.com/iojs/io.js/pull/1042
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Introduced in joyent/node v0.10 as a backwards compatibility measure.
It's an ugly hack and allowing invalid UTF-8 is not a good idea in the
first place, remove it.
PR-URL: https://github.com/iojs/io.js/pull/1042
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
The copyright and license notice is already in the LICENSE file. There
is no justifiable reason to also require that it be included in every
file, since the individual files are not individually distributed except
as part of the entire package.
Initial attempt to remove all uses of Isolate::GetCurrent(). Still
exists a few locations, but this works out a heavy usage.
PR-URL: https://github.com/iojs/io.js/pull/244
Reviewed-by: Ben Noordhuis <info@bnoordhuis.nl>
Due to a recent V8 upgrade, more methods require Isolate as an argument.
PR-URL: https://github.com/iojs/io.js/pull/244
Reviewed-by: Ben Noordhuis <info@bnoordhuis.nl>
Now that we are building with C++11 features enabled, replace use
of NULL with nullptr.
The benefit of using nullptr is that it can never be confused for
an integral type because it does not support implicit conversions
to integral types except boolean - unlike NULL, which is defined
as a literal `0`.
Because of behavior change of some V8 APIs (they mostly became more
strict), following modules needed to be fixed:
* crypto: duplicate prototype methods are not allowed anymore
* contextify: some TryCatch trickery, the binding was using it
incorrectly
* util: maximum call stack error is now crashing in a different place
Reviewed-By: Trevor Norris <trevnorris@gmail.com>
PR-URL: https://github.com/joyent/node/pull/8476
Because of behavior change of some V8 APIs (they mostly became more
strict), following modules needed to be fixed:
* crypto: duplicate prototype methods are not allowed anymore
* contextify: some TryCatch trickery, the binding was using it
incorrectly
* util: maximum call stack error is now crashing in a different place
Reviewed-By: Trevor Norris <trevnorris@gmail.com>
PR-URL: https://github.com/joyent/node/pull/8476
Anna Henningsen
Sakthipriyan Vairamani
James M Snell
Trevor Norris
Michaël Zasso
Ben Noordhuis
Fedor Indutny
isaacs