Removes the check for maxTickDepth for non-domain callbacks. So a user
can starve I/O by setting a recursive nextTick.
The domain case is more complex and will be addressed in another commit.
Previous code was calling uv_loop_delete() directly on a running loop,
which led to race condition aborts/segfaults within libuv. This change
changes the watchdog thread to call uv_run() with UV_RUN_ONCE so that
the call exits after either the timer times out or uv_async_send() is
called from the main thread in Watchdog::Destroy(). The timer/async
handles are then closed and uv_run() with UV_RUN_DEFAULT is called so
that libuv has a chance to cleanup before the thread exits. The main
thread meanwhile calls uv_thread_join() and then uv_loop_delete() to
complete the cleanup.
Before this, entering something like:
> JSON.parse('066');
resulted in the "..." prompt instead of displaying the expected
"SyntaxError: Unexpected number"
Stream's `._write()` callback should be invoked only after it's opposite
stream has finished processing incoming data, otherwise `finish` event
fires too early and connection might be closed while there's some data
to send to the client.
see #5544
When writing bad data to EncryptedStream it'll first get to the
ClientHello parser, and, only after it will refuse it, to the OpenSSL.
But ClientHello parser has limited buffer and therefore write could
return `bytes_written` < `incoming_bytes`, which is not the case when
working with OpenSSL.
After such errors ClientHello parser disables itself and will
pass-through all data to the OpenSSL. So just trying to write data one
more time will throw the rest into OpenSSL and let it handle it.
Otherwise, writing an empty string causes the whole program to grind to
a halt when piping data into http messages.
This wasn't as much of a problem (though it WAS a bug) in 0.8 and
before, because our hyperactive 'drain' behavior would mean that some
*previous* write() would probably have a pending drain event, and cause
things to start moving again.
Previously one could write anywhere in a buffer pool if they accidently
got their offset wrong. Mainly because the cc level checks only test
against the parent slow buffer and not against the js object properties.
So now we check to make sure values won't go beyond bounds without
letting the dev know.
Because of variations in different base64 implementation, it's been
decided to strip all padding from the end of a base64 string and
calculate its size from that.
Add localAddress and localPort properties to tls.CleartextStream.
Like remoteAddress and localPort, delegate to the backing net.Socket
object.
Refs #5502.
The default encoding is 'buffer'. When the input is a string, treat it
as 'binary'. Fixes the following assertion:
node: ../src/string_bytes.cc:309: static size_t
node::StringBytes::StorageSize(v8::Handle<v8::Value>, node::encoding):
Assertion `0 && "buffer encoding specified but string provided"'
failed.
Introduced in 64fc34b2.
Fixes#5482.
Test case:
var t = setInterval(function() {}, 1);
process.nextTick(t.unref);
Output:
Assertion failed: (args.Holder()->InternalFieldCount() > 0),
function Unref, file ../src/handle_wrap.cc, line 78.
setInterval() returns a binding layer object. Make it stop doing that,
wrap the raw process.binding('timer_wrap').Timer object in a Timeout
object.
Fixes#4261.
Commit 38149bb changes http.get() and http.request() to escape unsafe
characters. However, that creates an incompatibility with v0.10 that
is difficult to work around: if you escape the path manually, then in
v0.11 it gets escaped twice. Change lib/http.js so it no longer tries
to fix up bad request paths, simply reject them with an exception.
The actual check is rather basic right now. The full check for illegal
characters is difficult to implement efficiently because it requires a
few characters of lookahead. That's why it currently only checks for
spaces because those are guaranteed to create an invalid request.
Fixes#5474.
getServers returns an array of ips that are currently being used for
resolution
setServers takes an array of ips that are to be used for resolution,
this will throw if there's invalid input but preserve the original
configuration
Commit 9352c19 ("child_process: don't emit same handle twice") trades
one bug for another.
Before said commit, a handle was sometimes delivered with messages it
didn't belong to.
The bug fix introduced another bug that needs some explaining. On UNIX
systems, handles are basically file descriptors that are passed around
with the sendmsg() and recvmsg() system calls, using auxiliary data
(SCM_RIGHTS) as the transport.
node.js and libuv depend on the fact that none of the supported systems
ever emit more than one SCM_RIGHTS message from a recvmsg() syscall.
That assumption is something we should probably address someday for the
sake of portability but that's a separate discussion.
So, SCM_RIGHTS messages are never coalesced. SCM_RIGHTS and normal
messages however _are_ coalesced. That is, recvmsg() might return this:
recvmsg(); // { "message-with-fd", "message", "message" }
The operating system implicitly breaks pending messages along
SCM_RIGHTS boundaries. Most Unices break before such messages but Linux
also breaks _after_ them. When the sender looks like this:
sendmsg("message");
sendmsg("message-with-fd");
sendmsg("message");
Then on most Unices the receiver sees messages arriving like this:
recvmsg(); // { "message" }
recvmsg(); // { "message-with-fd", "message" }
The bug fix in commit 9352c19 assumes this behavior. On Linux however,
those messages can also come in like this:
recvmsg(); // { "message", "message-with-fd" }
recvmsg(); // { "message" }
In other words, it's incorrect to assume that the file descriptor is
always attached to the first message. This commit makes node wise up.
Fixes#5330.
This adds proper support for the following situation:
w.cork();
w.write(...);
w.cork();
w.write(...);
w.uncork();
w.write(...);
w.uncork();
This is relevant when you have a function (as we do in HTTP) that wants
to use cork, but in some cases, want to have a cork/uncork *around*
that function, without losing the benefits of writev.
In synchronous Writable streams (where the _write cb is called on the
current tick), the 'finish' event (and thus the end() callback) can in
some cases be called before all the write() callbacks are called.
Use a counter, and have stream.Transform rely on the 'prefinish' event
instead of the 'finish' event.
This has zero effect on most streams, but it corrects an edge case and
makes it perform more deterministically, which is a Good Thing.
Implement support for debugging cluster workers. Each worker process
is assigned a new debug port in an increasing sequence.
I.e. when master process uses port 5858, then worker 1 uses port 5859,
worker 2 uses port 5860, and so on.
Introduce new command-line parameter '--debug-port=' which sets debug_port
but does not start debugger. This option works for all node processes, it
is not specific to cluster workers.
Fixesjoyent/node#5318.
When developer calls setBreakpoint with an unknown script name,
we convert the script name into regular expression matching all
paths ending with given name (name can be a relative path too).
To create such breakpoint in V8, we use type `scriptRegEx`
instead of `scriptId` for `setbreakpoint` request.
To restore such breakpoint, we save the original script name
send by the user. We use this original name to set (restore)
breakpoint in the new child process.
This is a back-port of commit 5db936d from the master branch.
Add a watchdog class which executes a timer in a separate event loop in
a separate thread that will terminate v8 execution if it expires.
Add timeout argument to functions in vm module which use the watchdog
if a non-zero timeout is specified.
When developer calls setBreakpoint with an unknown script name,
we convert the script name into regular expression matching all
paths ending with given name (name can be a relative path too).
To create such breakpoint in V8, we use type `scriptRegEx`
instead of `scriptId` for `setbreakpoint` request.
To restore such breakpoint, we save the original script name
send by the user. We use this original name to set (restore)
breakpoint in the new child process.
Fixed a bug in debugger repl where `restart` command did not work
when a custom debug port was specified via command-line option
--port={number}.
File test/simple/helper-debugger-repl.js was extracted
from test/simple/test-debugger-repl.js
Fixed a bug in debugger repl where `restart` command did not work
when a custom debug port was specified via command-line option
--port={number}.
File test/simple/helper-debugger-repl.js was extracted
from test/simple/test-debugger-repl.js
Errors in leaf child processes weren't picked up by the test runner
because they didn't get bubbled up to the main process. Don't forcibly
kill the child processes; tell them to quit gracefully, then inspect
their exit codes.
Fixes#3740
In the case of pipelined requests, you can have a situation where
the socket gets destroyed via one req/res object, but then trying
to destroy *another* req/res on the same socket will cause it to
call undefined.destroy(), since it was already removed from that
message.
Add a guard to OutgoingMessage.destroy and IncomingMessage.destroy
to prevent this error.
Fixes#3740
In the case of pipelined requests, you can have a situation where
the socket gets destroyed via one req/res object, but then trying
to destroy *another* req/res on the same socket will cause it to
call undefined.destroy(), since it was already removed from that
message.
Add a guard to OutgoingMessage.destroy and IncomingMessage.destroy
to prevent this error.
Trevor Norris
Andrew Paprocki
Brian White
Fedor Indutny
Nathan Zadoks
Timothy J Fontaine
isaacs
Ben Noordhuis
Robert Kowalski
Benoit Vallée
Nick Sullivan
Ben Kelly
Miroslav Bajtoš
Daniel Moore
Sam Roberts