Created using `tools/license-builder.sh`
PR-URL: https://github.com/nodejs/node/pull/7127
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: James M Snell <jasnell@gmail.com>
Typos in the `setTimeout` vs. `setImmediate` section were hindering
readability. Fixed these typos.
PR-URL: https://github.com/nodejs/node/pull/6916
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Robert Jefe Lindstaedt <robert.lindstaedt@gmail.com>
Forrest Norvell (that's me!) has been a collaborator since roughly April
2015. I thought I'd added myself to the list of collaborators, but
apparently hadn't. I was onboarded by @chrisdickinson as part of the
second or third group of collaborators added to the project.
PR-URL: https://github.com/nodejs/node/pull/6945
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/6811
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Replace booleans with `common.mustCall()`, migrate from `var` to
`const`, and apply minor formatting changes.
PR-URL: https://github.com/nodejs/node/pull/6756
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Git logs print my full name Robert Jefe Lindstaedt.
When I did #6389 I forgot simply forgot it.
PR-URL: https://github.com/nodejs/node/pull/6880
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Fixes: https://github.com/nodejs/node/issues/6765
PR-URL: https://github.com/nodejs/node/pull/6809
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
The only tests for `addMembership()` and `dropMembership()` (from the
`dgram` module) were in `test/internet` which means they almost never
get run. This adds checks in `test/parallel`.
PR-URL: https://github.com/nodejs/node/pull/6753
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Make sure that `catch-stdout-error` has written data before the
destination process exits.
Fixes: https://github.com/nodejs/node/issues/6791
PR-URL: https://github.com/nodejs/node/pull/6808
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Roman Klauke <romaaan.git@gmail.com>
Currently we are overwriting the entire env object of the child-process
spawned in `npm-test-install`. This commit alternatively clones the
`process.env` object and modifies it with the neccessary changes before
passing it the the spawned process.
Fixes: https://github.com/nodejs/node/issues/6736
PR-URL: https://github.com/nodejs/node/pull/6797
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
ESLint 2.9.0 fixes some minor bugs that we have been experiencing and
introduces some new rules that we may wish to consider.
PR-URL: https://github.com/nodejs/node/pull/6498
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
ESLint 2.9.0 fixes some bugs that resulted in minor issues not being
caught by ESLint 2.7.0. Update instances of our code that will be
flagged when we upgrade to ESLint 2.9.0.
PR-URL: https://github.com/nodejs/node/pull/6498
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Make sure dereferencing a `Utf8Value` instance always returns
a zero-terminated string, even if the conversion to string failed.
The corresponding bugfix in the master branch happened in 44a40325da
(https://github.com/nodejs/node/pull/6357).
Ref: https://github.com/nodejs/node/pull/6357
PR-URL: https://github.com/nodejs/node/pull/7101
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
As the minifier logic is not used at all, this patch removes the code
necessary for it.
PR-URL: https://github.com/nodejs/node/pull/6636
Reviewed-By: Jackson Tian <shvyo1987@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Many places in cares library, when the stream data arrives
from the network with respect to dns and reverse dns
resolution, they are populated into data structures created
dymaically based on the size of the data. Malloc is heavily
used for such cases.
Often, based on the data length, malloc(0) is invoked. Linux
behavior on zero byte allocation is to return a valid pointer
where in AIX, it always return NULL.
This manifestst as test failure of test/internet/test-dns.js
Solution is to build cares with Linux compatible malloc behavior
PR-URL: https://github.com/nodejs/node/pull/6305
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-by: Michael Dawson <michael_dawson@ca.ibm.com>
url.js was broken since it didn't use the common.js runner. This fixes
that issue by merging it with url-resolve.js, which also benchmarks
url.resolve.
PR-URL: https://github.com/nodejs/node/pull/5177
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
The benchmark runner spawns new processes for each configuration. The
specific configuration is transfered by process.argv. This means that
the values have to be parsed. As of right now only numbers and strings
are parsed correctly. However other values such as objects where used.
This fixes the benchmarks that used non-string/number values and
prevents future issues by asserting the type.
PR-URL: https://github.com/nodejs/node/pull/5177
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Turn off the custom toolchain, we don't bundle ld.gold. It's not that
useful anyway because it uses a fixed path. For people that do use a
custom toolchain, there is the GCC_EXEC_PREFIX environment variable.
PR-URL: https://github.com/nodejs/node/pull/6393
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Now, that we can cross-compile node for Android, we also need to take
care of native node modules installed with npm. Since there is no way to
install and run npm on an Android device, we could instal node on host
and setup an environment for installing node modules and cross-compile
the native sources using Android NDK.
The changes to this script will allow npm, when installing a module, to
compile it using NDK.
In order to do this, the developer should do the following steps:
1. Compile and install node on host, using: configure, make and make
install
2. Build node for Android, using: source android-configure <path_to_ndk>
arch and make
3. Push node binary to Android device
4. Using the same session, configure npm arch using: npm config set
arch=<arch>
5. Install desired node modules using: npm install
6. Push installed node modules to Android device
Signed-off-by: Robert Chiras <robert.chiras@intel.com>
PR-URL: https://github.com/nodejs/node/pull/6349
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Addresses #5566. The `ee.once()` function is currently documented as
invoking the listener, and then removing it when the event is
triggered. However, this is not really the case. The listener is removed
and _then_ invoked. This only matters in a narrow set of use cases, but
when it matters, it matters that the docs are correct.
See the issue (#5566) for a discussion on why the code has not been
modified to match the documentation, but instead the documentation has
been modified to match the code.
Fixes: #5566
Ref: #6371
PR-URL: https://github.com/nodejs/node/pull/7103
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Robert Lindstaedt <robert.lindstaedt@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/6167
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Robert Jefe Lindstädt <robert.lindstaedt@gmail.com>
Node.js(1) does not make sense.
Node(1) would, but this isn’t a `man` page.
PR-URL: https://github.com/nodejs/node/pull/6167
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Robert Jefe Lindstädt <robert.lindstaedt@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/6167
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Robert Jefe Lindstädt <robert.lindstaedt@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/6812
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Previously, the example was checking for error by strict equality to
null. The error could be undefined though which would fail that check.
PR-URL: https://github.com/nodejs/node/pull/6660
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Jeremy Whitlock <jwhitlock@apache.org>
The line number checks in test-debugger-repl-break-in-module were
checking for line numbers that exceed the total number of lines in the
files that were being inspected. Change the checks to match the actual
files.
PR-URL: https://github.com/nodejs/node/pull/6686
Reviewed-By: Ben Noorhduis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
test-debugger-repl-term had incorrect expected output and so was
failing. It was likely dependent on previous bugs in the debugger.
The fixture file has been modified so that the output is as expected.
PR-URL: https://github.com/nodejs/node/pull/6682
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Ben Noorhduis <info@bnoordhuis.nl>
Move the newcomers section to be more noticeable to those who it will
be needed by.
Also removed some entries that are now effectively duplicates.
They are all in the above section.
PR-URL: https://github.com/nodejs/node/pull/6681
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Minwoo Jung <jmwsoft@gmail.com>
Reviewed-By: Alexander Makarenko <estliberitas@gmail.com>
Included a block in the modules.md file to explain the existence and
purpose of the module wrapper.
PR-URL: https://github.com/nodejs/node/pull/6433
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
One reference to the `fs.Stats object` is linkified, while two other
similarly made references to the object are not linkified.
Linking the remaining references makes sense due to similar context.
PR-URL: https://github.com/nodejs/node/pull/6485
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/6516
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
A closing underscore was missing from the `poll` section of the event
loop doc. Also emboldened a word for continuity and readability.
PR-URL: https://github.com/nodejs/node/pull/6529
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
This commit allows all array properties to be printed except for
"length". Previously, this filter was applied by checking the
type of each property. However, something changed in V8, and
array elements started coming through as numeric strings, which
stopped them from being displayed.
Fixes: https://github.com/nodejs/node/issues/6444
PR-URL: https://github.com/nodejs/node/pull/6448
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/6473
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Robert Lindstaedt <robert.lindstaedt@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/6447
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Santiago Gimeno
Myles Borins
Steve Mao
Kevin Donahue
Yuval Brik
Forrest L Norvell
Anna Henningsen
Marian
Bryan English
William Kapke
Mohsen
Rich Trott
Robert Jefe Lindstaedt
Myles Borins
Sakthipriyan Vairamani
Gireesh Punathil
Andreas Madsen
Ben Noordhuis
Robert Chiras
Lance Ball
Jeremiah Senkpiel
Kirill Fomichev
Evan Lucas
Anchika Agarwal
Matt Harrison
yorkie
justshiv
cjihrig
William Luo
Claudio Rodriguez
Juan