Argument checks were simplified by setting all undefined/NaN or out of
bounds values equal to their defaults.
Also copy() tests had a flaw that each buffer had the same bit pattern at
the same offset. So even if the copy failed, the bit-by-bit comparison
would have still been true. This was fixed by filling each buffer with a
unique value before copy operations.
Fix issue where SlowBuffers couldn't be passed as target to Buffer
copy().
Also included checks to see if Argument parameters are defined before
assigning their values. This offered ~3x's performance gain.
This adds a proxy for bytesWritten to the tls.CryptoStream. This
change makes the connection object more similar between HTTP and
HTTPS requests in an effort to avoid confusion.
See issue #4650 for more background information.
We detect for non-string and non-buffer values in onread and
turn the stream into an "objectMode" stream.
If we are in "objectMode" mode then howMuchToRead will
always return 1, state.length will always have 1 appended
to it when there is a new item and fromList always takes
the first value from the list.
This means that for object streams, the n in read(n) is
ignored and read() will always return a single value
Fixed a bug with unpipe where the pipe would break because
the flowing state was not reset to false.
Fixed a bug with sync cb(null, null) in _read which would
forget to end the readable stream
This is similar to commit 2cbf458 but this time for 204 No Content
instead of 304 Not Modified responses.
When the user sends a 204 response with a Transfer-Encoding: chunked
header, suppress sending the zero chunk and force the connection to
close.
Force the connection to close when the response is a 304 Not Modified
and the user has set a "Transfer-Encoding: chunked" header.
RFC 2616 mandates that 304 responses MUST NOT have a body but node.js
used to send out a zero chunk anyway to accommodate clients that don't
have special handling for 304 responses.
It was pointed out that this might confuse reverse proxies to the point
of creating security liabilities, so suppress the zero chunk and force
the connection to close.
Fix an off-by-one error introduced in 9fe3734 that caused a regression
in the default endianness used for writes in DataView::setGeneric().
Fixes#4626.
Due to the nature of asyncronous programming, it's impossible to know
what will run on the next tick. Because of this, it's not correct to
maintain domain stack state between ticks
Since the _fatalException handler is only invoked after the stack is
unwound, once it exits the tick will end. The only reasonable thing to
do in that case is to exit *all* domains.
Keeping list of all sockets that were sent to child process causes memory
leak and thus unacceptable (see #4587). However `server.close()` should
still work properly.
This commit introduces two options:
* child.send(socket, { track: true }) - will send socket and track its status.
You should use it when you want to receive `close` event on sent sockets.
* child.send(socket) - will send socket without tracking it status. This
performs much better, because of smaller number of RTT between master and
child.
With both of these options `server.close()` will wait for all sent
sockets to get closed.
Keeping list of all sockets that were sent to child process causes memory
leak and thus unacceptable (see #4587). However `server.close()` should
still work properly.
This commit introduces two options:
* child.send(socket, { track: true }) - will send socket and track its status.
You should use it when you want `server.connections` to be a reliable
number, and receive `close` event on sent sockets.
* child.send(socket) - will send socket without tracking it status. This
performs much better, because of smaller number of RTT between master and
child.
With both of these options `server.close()` will wait for all sent
sockets to get closed.
Unfortunately, it's just too slow to do this in events.js. Users will
just have to live with not having events named __proto__ or toString.
This reverts commit b48e303af0.
This test starts two clustered HTTP servers on the same port.
It expects the first cluster to succeed and the second cluster
to fail with EADDRINUSE.
Reapplies commit cacd3ae, accidentally reverted in a2851b6.
Reject negative offsets in SlowBuffer::MakeFastBuffer(), it allows
the creation of buffers that point to arbitrary addresses.
Reported by Trevor Norris.
Problem 1: If stream.push() triggers a 'readable' event, and the user
calls `read(n)` with some n > the highWaterMark, then the push() will
return false (indicating that they should not push any more), but no
future 'readable' event is coming (because we're above the
highWaterMark).
Solution: return true from push() when needReadable is set.
Problem 2: A read(n) for n != 0, after the stream had encountered an
EOF, would not trigger the 'end' event if the EOF was pushed in
synchronously by the _read() function.
Solution: Check for ended in stream.read() and schedule an end event if
the length now equals 0.
Fix#4585
Improvements:
* floating point operations are approx 4x's faster
* Now write quiet NaN's
* all read/write on floating point now done in C, so no more need for
lib/buffer_ieee754.js
* float values have more accurate min/max value checks
* add additional benchmarks for buffers read/write
* created benchmark/_bench_timer.js which is a simple library that
can be included into any benchmark and provides an intelligent tracker
for sync and async tests
* add benchmarks for DataView set methods
* add checks and tests to make sure offset is greater than 0
There was previously an assert() in there, but this part of the code is
so high-volume that the added cost made a measurable dent in http_simple.
Just checking inline is fine, though, and prevents a lot of potential
hazards.
Say that a stream's current read queue has 101 bytes in it, and the
underlying resource has ended (ie, reached EOF).
If you do something like this:
stream.read(100); // leave a byte behind
stream.read(0); // read(0) for some reason
then the read(0) will get 0 from the howMuchToRead function. Since the
stream was ended, this was incorrectly treating the 0 as a "there is no
more in the buffer", and emitting 'end' before that last byte was read.
Why have the read(0) in the first place? We do this in some cases to
trigger the last few bytes of a net socket (such as a child process's
stdio pipes). This was causing issues when piping a `git archive` job
to a file: the resulting tarball was incomplete, because it occasionally
was not getting the last chunk.
Fix the following exception:
http.js:974
this._httpMessage.emit('close');
^
TypeError: Cannot call method 'emit' of null
at Socket.onServerResponseClose (http.js:974:21)
at Socket.EventEmitter.emit (events.js:124:20)
at net.js:421:10
at process._tickCallback (node.js:386:13)
at process._makeCallback (node.js:304:15)
Fixes#4586.
This also slightly changes the semantics, in that a 'readable'
event may be triggered by the first write() call, even if a
user has not yet called read().
This happens because the Transform _write() handler is calling
read(0) to start the flow of data. Technically, the new behavior
is more 'correct', since it is more in line with the semantics
of the 'readable' event in other streams.
When switching into compatibility mode by setting `data` event listener,
`_read()` method will be called immediately. If method implementation
invokes callback in the same tick - all emitted `data` events will be
discarded, because `data` listener wasn't set yet.
Raise a TypeError when the argument to send() or sendto() is anything
but a Buffer.
Fixes the following assertion:
$ node -e 'require("dgram").createSocket("udp4").send("BAM")'
node: ../../src/udp_wrap.cc:220: static v8::Handle<v8::Value>
node::UDPWrap::DoSend(const v8::Arguments&, int): Assertion
`Buffer::HasInstance(args[0])' failed.
Aborted (core dumped)
Fixes#4496.
The test was failing in debug mode because the timeouts were set too
low. Fix that by increasing the timeouts. Admittedly not a great fix.
If this test keeps playing up, it's probably best to remove it.
Fixes#4528.
This test is timing sensitive and hence quite unreliable with debug
builds. What's worse is that it leaves a stray child process behind
that listens on the default test port and that makes all the tests
that come after it fail with EADDRINUSE errors.
Allows for arbitrary path to executable spawned using `fork`. This
fixes some issues around running multiple versions of node with workers
and allows arbitrary IPC with compatible executables.
Fixes#3248.
In JS, the expression ".1" is a floating point number. Issue 4268 concerns the
REPL interpreting floating point numbers that lead with a "." as keywords. The
original bugfix worked for this specific case but not for the general case:
var x = [
.1,
.2,
.3
];
The attached change and test (`.1+.1` should be `.2`) fix the bug.
Closes#4513.
Trevor Norris
Andy Burke
isaacs
Fedor Indutny
Raynos
Ben Noordhuis
Dave Olszewski
Felix Böhm
Bert Belder
Andreas Madsen
Shigeki Ohtsu
Bradley Meck
James Hight
Nirk Niggler