Remove the explicit dependency on $(NODE_EXE), it always triggers a
rebuild due to it being a .PHONY rule. Add-ons in test/addons/ have
the same implicit dependency so it isn't completely without precedent.
PR-URL: https://github.com/nodejs/node/pull/11311
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
This just adds an additional make target (`make test-node-inspect`) but
will not include the new debugger in releases.
PR-URL: https://github.com/nodejs/node/pull/10187
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Replace node-weak with a small hand-rolled add-on. We can now drop
node-weak and nan, reducing the size of the source tree by about 750 kB
and the size of the tarball by about 150-300 kB.
PR-URL: https://github.com/nodejs/node/pull/11239
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Sometimes, after a cluster or debug test fails, a fixture hangs around
and holds onto a needed port, causing subsequent CI runs to fail. This
adds a command I've been running manually when this occurs. The command
will clear the stalled jobs before a CI run.
PR-URL: https://github.com/nodejs/node/pull/11246
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Josh Gavant <josh.gavant@outlook.com>
Adds Google Analytics tracking script to all doc pages when
`DOCS_ANALYTICS` is set when running `make`:
```bash
$ DOCS_ANALYTICS=<GOOGLE ANALYTICS ID> make
```
By default (when `DOCS_ANALYTICS` is not set), no tracking scripts are
included.
It respects "Do Not Track" settings end users might have in their
browser.
Also changes make target `doc-upload` from depending on the
`$(TARBALL)` target, to only depend on `doc` directly.
PR-URL: https://github.com/nodejs/node/pull/6601
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Currently when running make node_g the following error is displayed:
if [ ! -r node -o ! -L ]; then ln -fs out/Debug/node node_g; fi
/bin/sh: line 0: [: argument expected
It looks like there was a typo for the NODE_EXE where node became
lowercase instead of uppercase.
Ref: https://github.com/nodejs/node/pull/9827
PR-URL: https://github.com/nodejs/node/pull/10153
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Italo A. Casas <me@italoacasas.com>
The node -> out/*/node symlink is getting recreated in parallel with
other targets in the makefile which require it (e.g. test-ci) and
this seems to be causing a race condition which is showing up on AIX
Fixes: https://github.com/nodejs/node/issues/9825
PR-URL: https://github.com/nodejs/node/pull/9827
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-by: Michael Dawson <michael_dawson@ca.ibm.com>
Enable cpplint for files in test/cctest. Fix up the style issues it
reports.
PR-URL: https://github.com/nodejs/node/pull/9787
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
1. As it is, it just tries to build only the `all.html` file. If none of
the other files are built already, generated page will not be good.
To fix this, we process the assets and generate HTML files first.
2. After the HTML is generated, `google-chrome` is used to open the
generated file in browser. This is not very portable as it might not
be installed or installations might have used a different name. So,
we use Python's webbrowser module to open the file.
PR-URL: https://github.com/nodejs/node/pull/9436
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
The tick-processor tests are inherently non-deterministic. They
therefore have false negatives from time to time. They also
sometimes leave extra processes running.
Move them to their own directory until these issues are sorted. Note
that this means that the tests will not be run in CI. Like the inspector
tests and other tests, they will have to be run manually when they are
wanted.
PR-URL: https://github.com/nodejs/node/pull/9506
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Matthew Loring <mattloring@google.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Currently, when building the addons the following warning is displayed:
make[2]: warning: jobserver unavailable: using -j1. Add `+' to parent
make rule.
Adding the MAKEFLAGS="-j1" to avoid the warning.
Also updated the log message to say that it is building the addon and
not running the test as I think that is more accurate.
PR-URL: https://github.com/nodejs/node/pull/9450
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
As the comments are indented in Makefile, they are actually echoed
on the screen. This patch makes sure that the comments actually start
at the beginning of the line, and so not echoed and ignored.
PR-URL: https://github.com/nodejs/node/pull/9375
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Prince John Wesley <princejohnwesley@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
As it is, node-gyp produces a lot of build related verbose messages.
Latest node-gyp upgrade allows us to specify --silent flag to suppress
those messages. Except for CI, addons build will run silently.
PR-URL: https://github.com/nodejs/node/pull/8990
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
The config.gypi target has a recipe that uses the control function error
to report if the config.gypi file is missing or if it is stale (the
configure file was updated which is a prerequisite of this rule).
GNU make has two phases, immediate and deferred. During the first phase
it will expand any variables or functions as the makefile is parsed.
The recipe in this case is a shell if statement, which is a deferred
construct. But the control function $(error) is an immediate construct
which will cause the makefile processing to stop during the first phase
of the Make process.
If I understand this correctly the only possible outcome of this rule is
the "Stale config.gypi, please re-run ./configure" message which will
be done in the first phase and then exit. The shell condition will not
be considered. So it will never report that the config.gypi is missing.
bnoordhuis suggested that we simply change this into a single error
message:
"Missing or stale config.gypi, please run configure"
PR-URL: https://github.com/nodejs/node/pull/9053
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Make the `test/addons/.buildstamp` file dependent on
`src/node_version.h` since addons need to be re-compiled after
`NODE_MODULE_VERSION` bumps, e.g. as it happened recently
in b5bdff876b.
PR-URL: https://github.com/nodejs/node/pull/8861
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Enable the cctests on the CI now that they know how to write TAP output.
PR-URL: https://github.com/nodejs/node/pull/8034
Reviewed-By: James M Snell <jasnell@gmail.com>
There is a file in there required to build V8. The rest is being ignored
by V8's .gitignore anyway.
PR-URL: https://github.com/nodejs/node/pull/8317
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
The location of various gypfiles has changed in V8 5.2.
PR-URL: https://github.com/nodejs/node/pull/8317
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Run `npm install` before building the documentation from release
tarballs. The doctool currently depends on `js-yaml`, which
is imported from the `tools/eslint` subtree; however, release
tarballs don’t contain that directory.
Running `npm install` is clearly not a beautiful solution,
but it works.
Fixes: https://github.com/nodejs/node/issues/7872
PR-URL: https://github.com/nodejs/node/pull/8413
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: James M Snell <jasnell@gmail.com>
This test executes a simple debug session over the inspector protocol.
PR-URL: https://github.com/nodejs/node/pull/8429
Reviewed-By: ofrobots - Ali Ijaz Sheikh <ofrobots@google.com>
Opt-out `nightly` and `next-nightly` from the documentation
requirement since these docs aren't meant to be published.
This fixes our nightly jobs in CI.
PR-URL: https://github.com/nodejs/node/pull/8325
Fixes: https://github.com/nodejs/build/issues/478
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This adds support for multiple HTTP benchmarkers. Adds autocannon
as the secondary benchmarker.
PR-URL: https://github.com/nodejs/node/pull/8140
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/8296
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Addon tests were still starting to run before the node exp file
creation was complete.
- remove process_outputs_as_sources as it did not fix the
problem
- update create_expfile.sh so that exp file is created in a
temporary file and then renamed to final name so that
file is only visible once it is complete
- update target used in building Addons so that for
AIX it depends on the exp file being available
PR-URL: https://github.com/nodejs/node/pull/8285
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
There are no JavaScript files in the `src` directory. It can be
safely omitted from the JavaScript linting step.
PR-URL: https://github.com/nodejs/node/pull/8128
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/7999
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Currently the build-addons target is called as part of the
test target, and it has test/addons/.buildstamp as a dependency.
When running ./configure --debug and later switching/
updating branches you can be in a situation where the config.gypi
files in the addons build directories are using an incorrect
value for default_configuration. Currently this can happen and you
will get test errors as there are a few test that depend on the
value of default_configuration to be Release.
Ben Noordhuis provided the solution for this by adding a dependency to
config.gypi, which is generated when running ./configure, and will
correct this situation.
This commit is related to #7860. Please see the dicussion in that
issue regarding the test using hard-coded paths.
PR-URL: https://github.com/nodejs/node/pull/7893
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
It wasn't obviouse that common.js was the main cli tool.
PR-URL: https://github.com/nodejs/node/pull/7094
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
These files are very old and undocumented. Most likely nobody are
using them.
PR-URL: https://github.com/nodejs/node/pull/7094
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Extend linting to tools/license2rtf.js and any other JS that gets added
to the `tools` directory by default.
This incidentally simplifies lint invocation.
PR-URL: https://github.com/nodejs/node/pull/7647
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Fix a `s/addon/addons/` typo in the Makefile.
PR-URL: https://github.com/nodejs/node/pull/7542
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Some CI jobs compile Node and run the tests on different machines.
This change enables collaborators to have finer control over what runs
on these jobs, such as the exact suites to run. The test-ci rule was
split into js and native, to allow for addons to be compiled only on
the machines that are going to run them.
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
PR-URL: https://github.com/nodejs/node/pull/7317
Currently we do not specific an absolute path for the tap output of the
V8 test suite. This is proving to be unreliable across release lines.
By prepending `$(PWD)` to each path we can guarantee it will always be
in the root folder.
PR-URL: https://github.com/nodejs/node/pull/7460
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
A missing 'break' statement unintentionally allowed "linary"
and "luffer" as alternatives for "binary" and "buffer".
Regression introduced in commit 54cc7212 ("buffer: introduce latin1
encoding term".)
PR-URL: https://github.com/nodejs/node/pull/7262
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
The prerequisite for rebuilding was on the binding.gyp file but the
actual sources.
PR-URL: https://github.com/nodejs/node/pull/7262
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Add a `REPLACEME` tag that should be used when introducing
docs for new features, so that they can be updated when releases
are made.
Ref: https://github.com/nodejs/node/issues/6578
PR-URL: https://github.com/nodejs/node/pull/6864
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Claudio Rodriguez <cjrodr@yahoo.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
After the #3888 it was not possible to "make doc-only"
in some situations. This now fallsback to any installed
node version and throws "node not found" in error case.
Ref: https://github.com/nodejs/node/pull/3888
PR-URL: https://github.com/nodejs/node/pull/6906
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
We can tell when `node-gyp` is changed by creating a prerequisite on
`deps/npm/node_modules/node-gyp/package.json`. The prerequisite is added
to the `test/addons/.buildstamp` since `build-addons` is .PHONY.
Testing for this change was entirely manual.
$ make clean test-build # Initial build
$ make test-build # Make sure build-addons doesn't rebuild
$ touch deps/npm/node_modules/node-gyp/package.json # simulate change
$ make test-build # Ensure build-addons rebuilds
PR-URL: https://github.com/nodejs/node/pull/6787
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The current makefile runs both `cctest` and `build-addons` in parallel
under the assumption that both rely on `all`. Unfortunately
`build-addons` does not rely on all, and there is an edge case where
by it is possible to call `build-addons` while compilation is still
happening.
This patch takes the simplest route by forcing `build-addons` and
`cctest` to run in sequence like the other test targets. This ensures
that `build-addons` will never be run during compilation.
It would be possible to modify `build-addons` to rely on `all` but it
would be a much more aggressive change to the MAKEFILE for a fairly
minor perf bump, as cctest is so fast.
PR-URL: https://github.com/nodejs/node/pull/6723
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Ben Noordhuis
Jan Krems
Rich Trott
Stewart X Addison
Phillip Johnsen
Daniel Bevenius
Sakthipriyan Vairamani (thefourtheye)
Jaideep Bajwa
Anna Henningsen
Michaël Zasso
Eugene Ostroukhov
Johan Bergström
Bartosz Sosnowski
Michael Dawson
Andreas Madsen
Brian White
João Reis
Myles Borins
Jeremiah Senkpiel
Robert Jefe Lindstaedt
Lance Ball