These properties were initially used to determine stream status
back in node v0.8 and earlier. Since streams2 however, these
properties were *always* true, which can be misleading for
example if you are trying to immediately determine whether
a Writable stream is still writable or not (to avoid a "write after
end" exception).
PR-URL: https://github.com/nodejs/node/pull/4083
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
This commit fixes two issues in test-cluster-disconnect-handles:
1. If the master's TCP connection to the worker fails, the worker
process stays alive and causes many other tests that use the same
common port number to also fail (with EADDRINUSE).
2. One particular problem that can cause the master's TCP connection
to fail is attempting an IPv6 connection to the worker when no IPv6
network interfaces are available.
PR-URL: https://github.com/nodejs/node/pull/4084
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
34a35919e1 added pretty printing for
TypedArray, ArrayBuffer, and DataView. This change allows inspecting
those across different contexts.
Since instanceof does not work across contexts, we can use
v8::Value::IsTypedArray, v8::Value::IsArrayBuffer, and
v8::Value::IsDataView
PR-URL: https://github.com/nodejs/node/pull/4098
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
When writing multiline input, one can't chain function calls as if the
lines begin with a period, since those are treated as REPL commands.
Before:
> ([0, 1, 2]
... .map(x => x + 1))
Invalid REPL keyword
After:
> ([0, 1, 2]
... .map(x => x + 1))
[ 1, 2, 3 ]
PR-URL: https://github.com/nodejs/node/pull/3835
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Sometimes the test was timing out because the worker process remained
stuck in the breakpoint and didn't exit. This could happen because the
continue was sent before the breakpoint was set. If that's the case,
with this change, a new continue command is sent so the worker process
can end.
PR-URL: https://github.com/nodejs/node/pull/4009
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The algorithm used to convert negative values to hex generates incorrect
values when the low byte(s) of the value are zero because a carried
subtraction is applied prematurely.
Fixes: https://github.com/nodejs/node/issues/3992
PR-URL: https://github.com/nodejs/node/pull/3994
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
It also tests displayPrompt by checking for '> '.
PR-URL: https://github.com/nodejs/node/pull/3908
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
When a client calls read() with a nonzero argument
on a Socket, that Socket sets this._consuming to true.
It never sets this._consuming back to false.
ChildProcess.flushStdio() currently doesn't flush
any streams where _consuming is truthy. But, that means
that it never flushes any stream that has ever been read from.
This prevents a child process from ever closing if one of
its streams has been read from, causing issue #4049. This
commit allows consuming streams to be flushed, and the
child process to emit a close event.
Fixes: https://github.com/nodejs/node/issues/4049
PR-URL: https://github.com/nodejs/node/pull/4071
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
These new checks are similar to the one introduced in 089d68861,
but for other types of objects. Specifically, if an object was
created in a different context, the constructor object will not be
the same as the constructor object in the current context, so we
have to compare constructor names instead.
PR-URL: https://github.com/nodejs/node/pull/3385
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Move the method that was added in commit 8ca412b from earlier this month
from lib/util.js to lib/internal/util.js.
Avoids exposing a method that we may not wish to expose just yet, seeing
how it relies on implementation details.
PR-URL: https://github.com/nodejs/node/pull/4026
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Remove a hack that was introduced in commit bb6d468d from November 2010.
This is groundwork for a follow-up commit that makes it possible to use
internal modules in lib/repl.js.
PR-URL: https://github.com/nodejs/node/pull/4026
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Make the win32 and posix versions of path.format() consistent in when
they add a directory separator between the dir and base parts of the
path (always add it unless the dir part is the same as the root).
Also, path.format() is now more functional in that it uses the name
and ext parts of the path if the base part is left out and it uses
the root part if the dir part is left out.
Reviewed-By: João Reis <reis@janeasystems.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/2408
A number of REPL tests define the same ArrayStream object. This
commit moves the repeated code into common.js.
PR-URL: https://github.com/nodejs/node/pull/4027
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
test-domain-exit-dispose-again had been written for node v0.10.x, and
was using the fact that callbacks scheduled with `process.nextTick`
wouldn't run if the domain attached to it was disposed.
This is not longer the case, and as a result the test would not catch
any regression: it would always pass.
This change rewrites that test to check that the current domain is
cleared properly when processing the rest of the timers list if a
timer's callback throws an error. This makes the test fail without the
original fix, and pass with the original fix, as expected.
PR: #3990
PR-URL: https://github.com/nodejs/node/pull/3990
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
test-http-client-timeout-with-data fails on Raspberry Pi in CI from time
to time.
Use a platform-based timeout to improve reliability.
PR-URL: https://github.com/nodejs/node/pull/4015
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Roman Reiss <me@silverwind.io>
This commit adds the decorateErrorStack() method. This function
uses the internal util's getHiddenValue() method to extract
arrow messages from error objects and attach them to the
error's stack trace.
PR-URL: https://github.com/nodejs/node/pull/4013
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Test test-net-socket-local-address is flaky in FreeBSD jail but robust
otherwise.
Fixes: https://github.com/nodejs/node/issues/2475
PR-URL: https://github.com/nodejs/node/pull/3995
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Adds localAddress and localPort to req so we have better error messages.
Also fixes a case where ex is used before it is declared.
PR-URL: https://github.com/nodejs/node/pull/3946
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This commit adds an internal util method that makes hidden
values in the C++ layer visible in JS.
PR-URL: https://github.com/nodejs/node/pull/3988
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The test did not fail after 9999 runs in continuous integration.
Remove it's flaky status.
Fixes: https://github.com/nodejs/node/issues/2557
PR-URL: https://github.com/nodejs/node/pull/3975
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Roman Klauke <romaaan.git@gmail.com>
This has been supperted for long but never tested nor documented.
PR-URL: https://github.com/nodejs/node/pull/3641
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
As the Node.js documentation specified:
> fs.link(srcpath, dstpath, callback)
But when we run:
```js
> fs.link()
```
We will get the below:
```js
TypeError: dest path must be a string
at TypeError (native)
at Object.fs.link (fs.js:915:11)
at repl:1:4
```
Just correct the message of relevant 2 errors in this PR :-)
PR-URL: https://github.com/nodejs/node/pull/3917
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Because Node modules are wrapped, errors on the first line
of a file leak the wrapper to the user and report the wrong
column number. This commit adds a line break to the module
wrapper so that the first line is treated the same as all
other lines. To compensate for the additional line, a line
offset of -1 is also applied to errors.
Fixes: https://github.com/nodejs/node/issues/2860
PR-URL: https://github.com/nodejs/node/pull/2867
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The original test was only testing some of the headers that shouldn't be
concatenated as per lib/_http_incoming.js, so now the full list is
there.
'content-length` gives a parse error if you set it to a string, so the
test for that header uses numbers.
PR-URL: https://github.com/nodejs/node/pull/3930
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
FIPS 140-2 disallows use of MD5, which is used to derive the
initialization vector and key for createCipher(). Modify
all tests to expect exceptions in FIPS mode when disallowed
API is used, or to avoid testing such API in FIPS Mode.
PR-URL: https://github.com/nodejs/node/pull/3754
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Shigeki Ohtsu <ohtsu@iij.ad.jp>
Reviewed-By: James M Snell <jasnell@gmail.com>
This PR improves `prefix` in `util` that we've agreed on
https://github.com/nodejs/node/pull/3833
(separate code for javascript to move the printing function
to C++ directly)
PR-URL: https://github.com/nodejs/node/pull/3878
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
FIPS 140-2 does not permit the use of MD5 and RC4, skip or tests
that use them, or substitute with stronger crypto where applicable.
PR-URL: https://github.com/nodejs/node/pull/3757
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Reviewed-By: James Snell <jasnell@gmail.com>
Reviewed-By: Shigeki Ohtsu <ohtsu@iij.ad.jp>
Remove util.pump and associated tests
PR-URL: https://github.com/nodejs/node/pull/2531
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Generating 1024-bit primes on rpi test machines sometimes
causes timeouts. Avoid this situation by using 256-bit
primes when not running in FIPS mode.
Fixes: https://github.com/nodejs/node/issues/3881
PR-URL: https://github.com/nodejs/node/pull/3902
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Ben Noordhuis <ben@strongloop.com>
Move portion of `test-child-process-spawnsync-input.js` (that has been
flaky on CentOS in CI) to its own file. This allows us to more easily
eliminate the cause of the flakiness without affecting other unrelated
portions of the test.
Fixes: https://github.com/nodejs/node/issues/3863
PR-URL: https://github.com/nodejs/node/pull/3889
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit causes process.nextTick() to throw when its callback
argument is not a function.
PR-URL: https://github.com/nodejs/node/pull/3860
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Previously, this test was not supported on OS X. This change makes sure
that it is no longer skipped.
PR-URL: https://github.com/nodejs/node/pull/3901
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
- refactor test to accept multiple error messages per platform
- add new message to be found in Solaris 11.3 as per #3798
PR-URL: https://github.com/nodejs/node/pull/3855
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
In debugger, the usage of `repl` very ugly. I'd like there is a `p`
like gdb. So the `exec` is coming.
Usage:
```
$ ./iojs debug ~/git/node_research/server.js
< Debugger listening on port 5858
connecting to 127.0.0.1:5858 ... ok
break in /Users/jacksontian/git/node_research/server.js:1
> 1 var http = require('http');
2
3 http.createServer(function (req, res) {
debug> exec process.title
/Users/jacksontian/git/io.js/out/Release/iojs
debug>
```
And the `repl`:
```
debug> repl
Press Ctrl + C to leave debug repl
> process.title
'/Users/jacksontian/git/io.js/out/Release/iojs'
debug>
(^C again to quit)
```
The enter and leave debug repl is superfluous.
R-URL: https://github.com/nodejs/node/pull/1491
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
common.checkSpawnSyncRet is only used in one test. Move it out of
common.js and into that test (test-child-process-spawnsync-input.js).
PR-URL: https://github.com/nodejs/node/pull/3871
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Documentation currently states that setting noAssert and passing a value
larger than can fit in the Buffer will cause data to be silently
dropped. Change implementation to match documented behavior.
Fixes: https://github.com/nodejs/node/issues/3766
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
`test/internet/test-dgram-broadcast-multi-process.js` fails if it is in
a FreeBSD jail. This issue is with the way FreeBSD jails work and not
with Node. Skip the test if in a FreeBSD jail.
PR-URL: https://github.com/nodejs/node/pull/3839
Fixes: https://github.com/nodejs/node/issues/2472
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Ben Noordhuis <ben@strongloop.com>
Use path join to construct the path instead of concatenating strings.
Replace backslash with double backslash so that they are escaped
correctly in the string passed to REPL.
PR-URL: https://github.com/nodejs/node/pull/3608
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Use stronger crypto (larger keys, etc.) for arbitrary tests so
they will pass in both FIPS and non-FIPS mode without altering
the original intent of the test cases.
PR-URL: https://github.com/nodejs/node/pull/3758
Reviewed-By: Shigeki Ohtsu <ohtsu@iij.ad.jp>
Reviewed-By: James M Snell <jasnell@gmail.com>
This test assures that if flush is called while the zlib object needs
to be drained that it will defer the callback until after the drain.
PR-URL: https://github.com/nodejs/node/pull/3534
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Utility function for tests to check if OpenSSL is using
a FIPS verified cryptographic provider.
PR-URL: https://github.com/nodejs/node/pull/3756
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Shigeki Ohtsu <ohtsu@iij.ad.jp>
Reviewed-By: James M Snell <jasnell@gmail.com>
Check that invalid DSA key sizes are rejected in FIPS mode.
PR-URL: https://github.com/nodejs/node/pull/3756
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Shigeki Ohtsu <ohtsu@iij.ad.jp>
Reviewed-By: James M Snell <jasnell@gmail.com>
Brian White
Evan Lucas
Zirak
Santiago Gimeno
Peter A. Bigot
Bryan English
Dave
Rich Trott
Ben Noordhuis
Nathan Woltman
cjihrig
Julien Gilli
Jan Schär
Carl Lei
yorkie
Tristian Flanagan
Stefan Budeanu
Michael Cornacchia
Minwoo Jung
Wyatt Preul
fansworld-claudio
Jackson Tian
P.S.V.R
Myles Borins