* PASS1-133: Modify cosign file naming for fully signed binaries. (#34)
* PASS1-133: Modify cosign file naming for fully signed binaries.
* Remove all USE_CRYPTO, it is not used anymore
Also remove function that is not needed.
* Added use of firmware version from header, also fixed a seg fault
* PASS1-135: Fix sticky up or down key (#33)
* PASS1-135: Fix sticky up or down key
* Add comment for input.reset function
* PASS1-128: Add support back for Bitcoin testnet (#29)
* Fixes part of PASS-91
Show address and index of the address being verified
* Second half of fix for ENV1-91
Add better messaging for address range searching
Fix a bug when saving next_addrs (was comparing dicts by ref)
* Fixes PASS1-122
Check change addresses in addition to receive address in "Verify Address"
* Fix comment punctuation
* Show backup filename to user after successful backup (#18)
Fix PASS1-92
* Auto-truncate multisig config names (#19)
Fix PASS1-101
* PASS1-101: Auto-truncate multisig config names (#19)
Fix PASS1-101
* Remove unnecessary comments
* PASS1-92 (#20)
* Show backup filename to user after successful backup
Fix PASS1-92
* Add missing 'card' parameter to `get_backups_folder_path()` calls
* Revert path function changes since 'card' is not available
* PASS1-102: Fix backwards microSD issue
Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure.
Updated `HAL_SD_Init()` to reset it before attempting initialization.
* PASS1-102: Fix backwards microSD issue (#21)
Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure.
Updated `HAL_SD_Init()` to reset it before attempting initialization.
* PASS1-102_b (#22)
* PASS1-102: Fix backwards microSD issue
Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure.
Updated `HAL_SD_Init()` to reset it before attempting initialization.
* Switch back to hard-coded path for now
* PASS1-122_b (#23)
* PASS1-102: Fix backwards microSD issue
Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure.
Updated `HAL_SD_Init()` to reset it before attempting initialization.
* Update user messaging for found/not found case of Verify Address
Fix bug with trailing space at end of line in `word_wrap()`
* Strip ever time through the loop
* PASS1-125: Add Git commit-msg hook to check for Linear ID (#24)
* PASS1-125: Add Git commit-msg hook to check for Linear ID
* Update .githooks/commit-msg
Co-authored-by: Jean Pierre Dudey <jeandudey@hotmail.com>
Co-authored-by: Jean Pierre Dudey <jeandudey@hotmail.com>
* PASS1-122: Minor updates to text (#27)
* PASS1-127: Fix `reuse lint` issues in the repo (#26)
* PASS1-113: Give the user a way to clear the developer pubkey slot (#25)
* PASS1-122: Added "Address Verified" text to new wallet pairing (#28)
* PASS1-122: Minor updates to text
* PASS1-122: Added "Address Verified" text to new wallet pairing
* PASS1-128: Add support back for Bitcoin testnet
Co-authored-by: Ken Carpenter <ken@foundationdevices.com>
Co-authored-by: Ken Carpenter <62639971+FoundationKen@users.noreply.github.com>
Co-authored-by: Jean Pierre Dudey <jeandudey@hotmail.com>
* PASS1-56: Use XFP in backups filename and don't save `backup_num` (#32)
* PASS1-34: Refactor find address code so there is only one copy (#37)
* PASS1-94: Prevent installing user-signed firmware if no user-key installed (#38)
* PASS1-94: Prevent installing user-signed firmware if no user signing key installed
* Fixed case where user pubkey was removed manually
* Fixed text to match other areas where text is used
* Update text message for developer pubkey
* Hard coded user signed field to false
Co-authored-by: Ken Carpenter <62639971+FoundationKen@users.noreply.github.com>
* PASS1-55: Add menu to switch to a different Passphrase without rebooting (#35)
* PASS1-55: Add menu to switch to a different Passphrase without rebooting
* Changed order of menu items in Passphrase menu
* Modified menu titles and removed "a" from inconsistent text
* PASS1-137: Add Justfile support to Gen 1 repo (#36)
* PASS1-137: Add Justfile support to Gen 1 repo
First pass - not all expected commands are added yet
* Update Justfile with fmt command
Add py and c/h formatting
Need to finalize .clang-format file before doing a full reformatting PR
* Refactor Justfiles to separate them out
Also add graphics build commands
* Update Justfiles a bit
Fix formatting of graphics header files in preparation for automatic code formatting
* PASS1-139: Implement code to allow OCD to capture a screenshot over JTAG (#42)
* PASS1-139: Implement code to allow OCD to capture a screenshot over JTAG
* Update sram4.py
* PASS1-132: Remove duplicate file compilation (#39)
* PASS1-78: In display.text_input, split lines based on pixel widths (#41)
* PASS1-78: In display.text_input, split lines based on pixel widths
* Check for StringIO object before calling split_by_char_size
* PASS1-89: Show exported filename when exporting wallet to microSD (#43)
* PASS1-89: Show exported filename when exporting wallet to microSD
* Deleted/commented unnecessary lines
* PASS1-136: Add Specter wallet back once they fix UR issues (#44)
* PASS1-136: Add Specter wallet back once they fix UR issues
* Rebase onto dev-v1.0.7
* Remove passport from export filename
* Remove flag from all wallets besides Specter wallet
* Removed flag from unnecessary field and renamed flag to import
* Renamed multisig_import function
* PASS1-112: Passphrase input dialog improvements (#48)
* PASS1-112: Passphrase input dialog improvements
The passphrase is limited to 64 characters. The line spacing was reduced to make room for 7 lines. 63 capital W's will fill all 7 lines (+1 over), otherwise 64 characters usually takes about 4 lines.
* Add constant for max message length
* TOOL-3: Setup Docker infra for Gen 1 Development (#45)
* Add Dockerfile for building the firmware
Setting up a local environment for building the firmware can be a
painful process. This wraps that process up in a Dockerfile containing
all the deps needed which is then used in the justfile to build the
firmware.
* Add just targets for signing and cleaning
* Change sha target to take a sha and verify it directly
* Add docs for verifying the firmware SHA sum
* Add version param to sign just target
* Update verify-sha output to be more explicit
* PASS1-67: Change unit to sats in settings (#46)
* PASS1-67: Change unit to sats in settings
* Added warnings for Testnet and made the setting volatile
* Added 'chain' removal to schema_evolution and moved Units menu to top
* Moved Units below Change Pin in menu
* TOOL-4: Implement CI for Passport Gen 1 build (#49)
* TOOL-4: Create CI for firmware build
* TOOL-4: Improve handling of git describe output
* TOOL-4: Rename Justfile to match others in repo
* TOOL-4: Add caching and separated Docker building in CI
* TOOL-4: Update CI to push image to local registry service
* TOOL-4: Update CI to allow customizing of D_BASE
* TOOL-4: Change clang format action
* TOOL-4: User correct clang format version
* TOOL-4: YAML :(
* TOOL-4: Update to clang-format-10.0
* TOOL-4: Updaet to 10
* TOOL-4: Build and export the bootloader
* TOOL-4: Add D_BASE to bootload build step
* TOOL-4: Correctly pass D_BASE to bootloader job
* TOOL-4: Update bootloader make path in Justfile
* TOOL-4: Update CI to output tools
* PASS1-140: Add Justfile commands to DEVELOPMENT.md (#51)
* PASS1-140: Add Justfile commands to DEVELOPMENT.md
* Update DEVELOPMENT.md
* Update DEVELOPMENT.md
Co-authored-by: Ken Carpenter <62639971+FoundationKen@users.noreply.github.com>
* PASS1-148: Fix missing address prefixes for testnet (#53)
* PASS1-148: Fix missing address prefixes for testnet
* Add comma separations to sats values
* Casa support added
* Added testnet prefix check to Verify Address process
* PASS1-150: Fixed missing argument in `import_from_psbt()` call (#55)
* PASS1-150: Fixed missing argument in `import_from_psbt()` call
Also fixed typo in function description.
* Added a space between value and label of BTC/sats
* Disable Casa Support
Casa has not approved the support for Passport yet, until then Casa is disabled temporarily.
Co-authored-by: Corey Lakey <corey.lakey@gmail.com>
Co-authored-by: Jean Pierre Dudey <jeandudey@hotmail.com>
Co-authored-by: Alex Sears <searsaw@users.noreply.github.com>
* PASS1-102: Fix backwards microSD issue
Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure.
Updated `HAL_SD_Init()` to reset it before attempting initialization.
* Update user messaging for found/not found case of Verify Address
Fix bug with trailing space at end of line in `word_wrap()`
* Strip ever time through the loop
* PASS1-102: Fix backwards microSD issue
Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure.
Updated `HAL_SD_Init()` to reset it before attempting initialization.
* Switch back to hard-coded path for now
* Show backup filename to user after successful backup
Fix PASS1-92
* Add missing 'card' parameter to `get_backups_folder_path()` calls
* Revert path function changes since 'card' is not available
Two issues:
- The UR2 sampler function was expecting the '1-3' indicator, and this is not included if there is a single UR fragment. Changed code to try to parse instead of relying on a complex regex.
- Fixed a similar issue with the UR1 sampler, but it can be simpler since we've already ruled out UR2.
- When sending the UR2 response, it always used "bytes" as the prefix. Now if it receives 'crypto-psbt', it responds with 'crypto-psbt'.
- Fixed is_ut_type() utility function which was incorrect
- All these fixes allow the code to work with BlueWallet's new UR2 support, but also stay compatible with older BlueWallet versions that only support UR1.
* Fix bug with seed restore
* Fix a crash when going BACK from renaming an Account entry without changing it
* Fix an error that appeared when trying to scan a multisig entry from the Sign with QR Code menu
* Fix bug with renaming an account
* Fix bug when creating an account with the same name as another account
Ken Carpenter
Corey Lakey
Ken Carpenter