passport-firmware

69 Commits

42 Branches

8 Tags

43 MiB

Tree: 428a1f0229

Commit Graph

Author	SHA1	Message	Date
Ken Carpenter	428a1f0229	Dev v1.0.7 (#57 ) * PASS1-133: Modify cosign file naming for fully signed binaries. (#34) * PASS1-133: Modify cosign file naming for fully signed binaries. * Remove all USE_CRYPTO, it is not used anymore Also remove function that is not needed. * Added use of firmware version from header, also fixed a seg fault * PASS1-135: Fix sticky up or down key (#33) * PASS1-135: Fix sticky up or down key * Add comment for input.reset function * PASS1-128: Add support back for Bitcoin testnet (#29) * Fixes part of PASS-91 Show address and index of the address being verified * Second half of fix for ENV1-91 Add better messaging for address range searching Fix a bug when saving next_addrs (was comparing dicts by ref) * Fixes PASS1-122 Check change addresses in addition to receive address in "Verify Address" * Fix comment punctuation * Show backup filename to user after successful backup (#18) Fix PASS1-92 * Auto-truncate multisig config names (#19) Fix PASS1-101 * PASS1-101: Auto-truncate multisig config names (#19) Fix PASS1-101 * Remove unnecessary comments * PASS1-92 (#20) * Show backup filename to user after successful backup Fix PASS1-92 * Add missing 'card' parameter to `get_backups_folder_path()` calls * Revert path function changes since 'card' is not available * PASS1-102: Fix backwards microSD issue Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure. Updated `HAL_SD_Init()` to reset it before attempting initialization. * PASS1-102: Fix backwards microSD issue (#21) Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure. Updated `HAL_SD_Init()` to reset it before attempting initialization. * PASS1-102_b (#22) * PASS1-102: Fix backwards microSD issue Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure. Updated `HAL_SD_Init()` to reset it before attempting initialization. * Switch back to hard-coded path for now * PASS1-122_b (#23) * PASS1-102: Fix backwards microSD issue Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure. Updated `HAL_SD_Init()` to reset it before attempting initialization. * Update user messaging for found/not found case of Verify Address Fix bug with trailing space at end of line in `word_wrap()` * Strip ever time through the loop * PASS1-125: Add Git commit-msg hook to check for Linear ID (#24) * PASS1-125: Add Git commit-msg hook to check for Linear ID * Update .githooks/commit-msg Co-authored-by: Jean Pierre Dudey <jeandudey@hotmail.com> Co-authored-by: Jean Pierre Dudey <jeandudey@hotmail.com> * PASS1-122: Minor updates to text (#27) * PASS1-127: Fix `reuse lint` issues in the repo (#26) * PASS1-113: Give the user a way to clear the developer pubkey slot (#25) * PASS1-122: Added "Address Verified" text to new wallet pairing (#28) * PASS1-122: Minor updates to text * PASS1-122: Added "Address Verified" text to new wallet pairing * PASS1-128: Add support back for Bitcoin testnet Co-authored-by: Ken Carpenter <ken@foundationdevices.com> Co-authored-by: Ken Carpenter <62639971+FoundationKen@users.noreply.github.com> Co-authored-by: Jean Pierre Dudey <jeandudey@hotmail.com> * PASS1-56: Use XFP in backups filename and don't save `backup_num` (#32) * PASS1-34: Refactor find address code so there is only one copy (#37) * PASS1-94: Prevent installing user-signed firmware if no user-key installed (#38) * PASS1-94: Prevent installing user-signed firmware if no user signing key installed * Fixed case where user pubkey was removed manually * Fixed text to match other areas where text is used * Update text message for developer pubkey * Hard coded user signed field to false Co-authored-by: Ken Carpenter <62639971+FoundationKen@users.noreply.github.com> * PASS1-55: Add menu to switch to a different Passphrase without rebooting (#35) * PASS1-55: Add menu to switch to a different Passphrase without rebooting * Changed order of menu items in Passphrase menu * Modified menu titles and removed "a" from inconsistent text * PASS1-137: Add Justfile support to Gen 1 repo (#36) * PASS1-137: Add Justfile support to Gen 1 repo First pass - not all expected commands are added yet * Update Justfile with fmt command Add py and c/h formatting Need to finalize .clang-format file before doing a full reformatting PR * Refactor Justfiles to separate them out Also add graphics build commands * Update Justfiles a bit Fix formatting of graphics header files in preparation for automatic code formatting * PASS1-139: Implement code to allow OCD to capture a screenshot over JTAG (#42) * PASS1-139: Implement code to allow OCD to capture a screenshot over JTAG * Update sram4.py * PASS1-132: Remove duplicate file compilation (#39) * PASS1-78: In display.text_input, split lines based on pixel widths (#41) * PASS1-78: In display.text_input, split lines based on pixel widths * Check for StringIO object before calling split_by_char_size * PASS1-89: Show exported filename when exporting wallet to microSD (#43) * PASS1-89: Show exported filename when exporting wallet to microSD * Deleted/commented unnecessary lines * PASS1-136: Add Specter wallet back once they fix UR issues (#44) * PASS1-136: Add Specter wallet back once they fix UR issues * Rebase onto dev-v1.0.7 * Remove passport from export filename * Remove flag from all wallets besides Specter wallet * Removed flag from unnecessary field and renamed flag to import * Renamed multisig_import function * PASS1-112: Passphrase input dialog improvements (#48) * PASS1-112: Passphrase input dialog improvements The passphrase is limited to 64 characters. The line spacing was reduced to make room for 7 lines. 63 capital W's will fill all 7 lines (+1 over), otherwise 64 characters usually takes about 4 lines. * Add constant for max message length * TOOL-3: Setup Docker infra for Gen 1 Development (#45) * Add Dockerfile for building the firmware Setting up a local environment for building the firmware can be a painful process. This wraps that process up in a Dockerfile containing all the deps needed which is then used in the justfile to build the firmware. * Add just targets for signing and cleaning * Change sha target to take a sha and verify it directly * Add docs for verifying the firmware SHA sum * Add version param to sign just target * Update verify-sha output to be more explicit * PASS1-67: Change unit to sats in settings (#46) * PASS1-67: Change unit to sats in settings * Added warnings for Testnet and made the setting volatile * Added 'chain' removal to schema_evolution and moved Units menu to top * Moved Units below Change Pin in menu * TOOL-4: Implement CI for Passport Gen 1 build (#49) * TOOL-4: Create CI for firmware build * TOOL-4: Improve handling of git describe output * TOOL-4: Rename Justfile to match others in repo * TOOL-4: Add caching and separated Docker building in CI * TOOL-4: Update CI to push image to local registry service * TOOL-4: Update CI to allow customizing of D_BASE * TOOL-4: Change clang format action * TOOL-4: User correct clang format version * TOOL-4: YAML :( * TOOL-4: Update to clang-format-10.0 * TOOL-4: Updaet to 10 * TOOL-4: Build and export the bootloader * TOOL-4: Add D_BASE to bootload build step * TOOL-4: Correctly pass D_BASE to bootloader job * TOOL-4: Update bootloader make path in Justfile * TOOL-4: Update CI to output tools * PASS1-140: Add Justfile commands to DEVELOPMENT.md (#51) * PASS1-140: Add Justfile commands to DEVELOPMENT.md * Update DEVELOPMENT.md * Update DEVELOPMENT.md Co-authored-by: Ken Carpenter <62639971+FoundationKen@users.noreply.github.com> * PASS1-148: Fix missing address prefixes for testnet (#53) * PASS1-148: Fix missing address prefixes for testnet * Add comma separations to sats values * Casa support added * Added testnet prefix check to Verify Address process * PASS1-150: Fixed missing argument in `import_from_psbt()` call (#55) * PASS1-150: Fixed missing argument in `import_from_psbt()` call Also fixed typo in function description. * Added a space between value and label of BTC/sats * Disable Casa Support Casa has not approved the support for Passport yet, until then Casa is disabled temporarily. Co-authored-by: Corey Lakey <corey.lakey@gmail.com> Co-authored-by: Jean Pierre Dudey <jeandudey@hotmail.com> Co-authored-by: Alex Sears <searsaw@users.noreply.github.com>	3 years ago

Author

SHA1

Message

Date

Ken Carpenter

428a1f0229

Dev v1.0.7 (#57 )

* PASS1-133: Modify cosign file naming for fully signed binaries. (#34)

* PASS1-133: Modify cosign file naming for fully signed binaries.

* Remove all USE_CRYPTO, it is not used anymore

Also remove function that is not needed.

* Added use of firmware version from header, also fixed a seg fault

* PASS1-135: Fix sticky up or down key (#33)

* PASS1-135: Fix sticky up or down key

* Add comment for input.reset function

* PASS1-128: Add support back for Bitcoin testnet (#29)

* Fixes part of PASS-91

Show address and index of the address being verified

* Second half of fix for ENV1-91

Add better messaging for address range searching
Fix a bug when saving next_addrs (was comparing dicts by ref)

* Fixes PASS1-122

Check change addresses in addition to receive address in "Verify Address"

* Fix comment punctuation

* Show backup filename to user after successful backup (#18)

Fix PASS1-92

* Auto-truncate multisig config names (#19)

Fix PASS1-101

* PASS1-101: Auto-truncate multisig config names (#19)

Fix PASS1-101

* Remove unnecessary comments

* PASS1-92 (#20)

* Show backup filename to user after successful backup

Fix PASS1-92

* Add missing 'card' parameter to `get_backups_folder_path()` calls

* Revert path function changes since 'card' is not available

* PASS1-102: Fix backwards microSD issue

Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure.
Updated `HAL_SD_Init()` to reset it before attempting initialization.

* PASS1-102: Fix backwards microSD issue (#21)

Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure.
Updated `HAL_SD_Init()` to reset it before attempting initialization.

* PASS1-102_b (#22)

* PASS1-102: Fix backwards microSD issue

Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure.
Updated `HAL_SD_Init()` to reset it before attempting initialization.

* Switch back to hard-coded path for now

* PASS1-122_b (#23)

* PASS1-102: Fix backwards microSD issue

Found that `ErrorCode` in `SD_HandleTypeDef` was not reset after a failure.
Updated `HAL_SD_Init()` to reset it before attempting initialization.

* Update user messaging for found/not found case of Verify Address

Fix bug with trailing space at end of line in `word_wrap()`

* Strip ever time through the loop

* PASS1-125: Add Git commit-msg hook to check for Linear ID (#24)

* PASS1-125: Add Git commit-msg hook to check for Linear ID

* Update .githooks/commit-msg

Co-authored-by: Jean Pierre Dudey <jeandudey@hotmail.com>

Co-authored-by: Jean Pierre Dudey <jeandudey@hotmail.com>

* PASS1-122: Minor updates to text (#27)

* PASS1-127: Fix `reuse lint` issues in the repo (#26)

* PASS1-113: Give the user a way to clear the developer pubkey slot (#25)

* PASS1-122: Added "Address Verified" text to new wallet pairing (#28)

* PASS1-122: Minor updates to text

* PASS1-122: Added "Address Verified" text to new wallet pairing

* PASS1-128: Add support back for Bitcoin testnet

Co-authored-by: Ken Carpenter <ken@foundationdevices.com>
Co-authored-by: Ken Carpenter <62639971+FoundationKen@users.noreply.github.com>
Co-authored-by: Jean Pierre Dudey <jeandudey@hotmail.com>

* PASS1-56: Use XFP in backups filename and don't save `backup_num` (#32)

* PASS1-34: Refactor find address code so there is only one copy (#37)

* PASS1-94: Prevent installing user-signed firmware if no user-key installed (#38)

* PASS1-94: Prevent installing user-signed firmware if no user signing key installed

* Fixed case where user pubkey was removed manually

* Fixed text to match other areas where text is used

* Update text message for developer pubkey

* Hard coded user signed field to false

Co-authored-by: Ken Carpenter <62639971+FoundationKen@users.noreply.github.com>

* PASS1-55: Add menu to switch to a different Passphrase without rebooting (#35)

* PASS1-55: Add menu to switch to a different Passphrase without rebooting

* Changed order of menu items in Passphrase menu

* Modified menu titles and removed "a" from inconsistent text

* PASS1-137: Add Justfile support to Gen 1 repo (#36)

* PASS1-137: Add Justfile support to Gen 1 repo

First pass - not all expected commands are added yet

* Update Justfile with fmt command

Add py and c/h formatting
Need to finalize .clang-format file before doing a full reformatting PR

* Refactor Justfiles to separate them out

Also add graphics build commands

* Update Justfiles a bit

Fix formatting of graphics header files in preparation for automatic code formatting

* PASS1-139: Implement code to allow OCD to capture a screenshot over JTAG (#42)

* PASS1-139: Implement code to allow OCD to capture a screenshot over JTAG

* Update sram4.py

* PASS1-132: Remove duplicate file compilation (#39)

* PASS1-78: In display.text_input, split lines based on pixel widths (#41)

* PASS1-78: In display.text_input, split lines based on pixel widths

* Check for StringIO object before calling split_by_char_size

* PASS1-89: Show exported filename when exporting wallet to microSD (#43)

* PASS1-89: Show exported filename when exporting wallet to microSD

* Deleted/commented unnecessary lines

* PASS1-136: Add Specter wallet back once they fix UR issues (#44)

* PASS1-136: Add Specter wallet back once they fix UR issues

* Rebase onto dev-v1.0.7

* Remove passport from export filename

* Remove flag from all wallets besides Specter wallet

* Removed flag from unnecessary field and renamed flag to import

* Renamed multisig_import function

* PASS1-112: Passphrase input dialog improvements (#48)

* PASS1-112: Passphrase input dialog improvements

The passphrase is limited to 64 characters. The line spacing was reduced to make room for 7 lines. 63 capital W's will fill all 7 lines (+1 over), otherwise 64 characters usually takes about 4 lines.

* Add constant for max message length

* TOOL-3: Setup Docker infra for Gen 1 Development (#45)

* Add Dockerfile for building the firmware

Setting up a local environment for building the firmware can be a
painful process. This wraps that process up in a Dockerfile containing
all the deps needed which is then used in the justfile to build the
firmware.

* Add just targets for signing and cleaning

* Change sha target to take a sha and verify it directly

* Add docs for verifying the firmware SHA sum

* Add version param to sign just target

* Update verify-sha output to be more explicit

* PASS1-67: Change unit to sats in settings (#46)

* PASS1-67: Change unit to sats in settings

* Added warnings for Testnet and made the setting volatile

* Added 'chain' removal to schema_evolution and moved Units menu to top

* Moved Units below Change Pin in menu

* TOOL-4: Implement CI for Passport Gen 1 build (#49)

* TOOL-4: Create CI for firmware build

* TOOL-4: Improve handling of git describe output

* TOOL-4: Rename Justfile to match others in repo

* TOOL-4: Add caching and separated Docker building in CI

* TOOL-4: Update CI to push image to local registry service

* TOOL-4: Update CI to allow customizing of D_BASE

* TOOL-4: Change clang format action

* TOOL-4: User correct clang format version

* TOOL-4: YAML :(

* TOOL-4: Update to clang-format-10.0

* TOOL-4: Updaet to 10

* TOOL-4: Build and export the bootloader

* TOOL-4: Add D_BASE to bootload build step

* TOOL-4: Correctly pass D_BASE to bootloader job

* TOOL-4: Update bootloader make path in Justfile

* TOOL-4: Update CI to output tools

* PASS1-140: Add Justfile commands to DEVELOPMENT.md (#51)

* PASS1-140: Add Justfile commands to DEVELOPMENT.md

* Update DEVELOPMENT.md

* Update DEVELOPMENT.md

Co-authored-by: Ken Carpenter <62639971+FoundationKen@users.noreply.github.com>

* PASS1-148: Fix missing address prefixes for testnet (#53)

* PASS1-148: Fix missing address prefixes for testnet

* Add comma separations to sats values

* Casa support added

* Added testnet prefix check to Verify Address process

* PASS1-150: Fixed missing argument in `import_from_psbt()` call (#55)

* PASS1-150: Fixed missing argument in `import_from_psbt()` call

Also fixed typo in function description.

* Added a space between value and label of BTC/sats

* Disable Casa Support

Casa has not approved the support for Passport yet, until then Casa is disabled temporarily.

Co-authored-by: Corey Lakey <corey.lakey@gmail.com>
Co-authored-by: Jean Pierre Dudey <jeandudey@hotmail.com>
Co-authored-by: Alex Sears <searsaw@users.noreply.github.com>

3 years ago

1 Commits (428a1f0229cd7d56d925a6f20c41b513ff3afd06)