You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
293 lines
9.2 KiB
293 lines
9.2 KiB
/*
|
|
|
|
Copyright (c) 2009-2018 ARM Limited. All rights reserved.
|
|
|
|
SPDX-License-Identifier: Apache-2.0
|
|
|
|
Licensed under the Apache License, Version 2.0 (the License); you may
|
|
not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
|
WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
|
|
NOTICE: This file has been modified by Nordic Semiconductor ASA.
|
|
|
|
*/
|
|
|
|
/* NOTE: Template files (including this one) are application specific and therefore expected to
|
|
be copied into the application project folder prior to its use! */
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "nrf.h"
|
|
#include "system_nrf52811.h"
|
|
|
|
/*lint ++flb "Enter library region" */
|
|
|
|
#define __SYSTEM_CLOCK_64M (64000000UL)
|
|
|
|
static bool errata_31(void);
|
|
static bool errata_36(void);
|
|
static bool errata_66(void);
|
|
static bool errata_108(void);
|
|
static bool errata_136(void);
|
|
|
|
/* nRF52840 erratas */
|
|
#ifdef DEVELOP_IN_NRF52840
|
|
static bool errata_103(void);
|
|
static bool errata_115(void);
|
|
#endif
|
|
|
|
#if defined ( __CC_ARM )
|
|
uint32_t SystemCoreClock __attribute__((used)) = __SYSTEM_CLOCK_64M;
|
|
#elif defined ( __ICCARM__ )
|
|
__root uint32_t SystemCoreClock = __SYSTEM_CLOCK_64M;
|
|
#elif defined ( __GNUC__ )
|
|
uint32_t SystemCoreClock __attribute__((used)) = __SYSTEM_CLOCK_64M;
|
|
#endif
|
|
|
|
void SystemCoreClockUpdate(void)
|
|
{
|
|
SystemCoreClock = __SYSTEM_CLOCK_64M;
|
|
}
|
|
|
|
void SystemInit(void)
|
|
{
|
|
/* Workaround for Errata 31 "CLOCK: Calibration values are not correctly loaded from FICR at reset" found at the Errata document
|
|
for your device located at https://www.nordicsemi.com/DocLib */
|
|
if (errata_31()){
|
|
*(volatile uint32_t *)0x4000053C = ((*(volatile uint32_t *)0x10000244) & 0x0000E000) >> 13;
|
|
}
|
|
|
|
/* Workaround for Errata 36 "CLOCK: Some registers are not reset when expected" found at the Errata document
|
|
for your device located at https://www.nordicsemi.com/DocLib */
|
|
if (errata_36()){
|
|
NRF_CLOCK->EVENTS_DONE = 0;
|
|
NRF_CLOCK->EVENTS_CTTO = 0;
|
|
NRF_CLOCK->CTIV = 0;
|
|
}
|
|
|
|
/* Workaround for Errata 66 "TEMP: Linearity specification not met with default settings" found at the Errata document
|
|
for your device located at https://www.nordicsemi.com/DocLib */
|
|
if (errata_66()){
|
|
NRF_TEMP->A0 = NRF_FICR->TEMP.A0;
|
|
NRF_TEMP->A1 = NRF_FICR->TEMP.A1;
|
|
NRF_TEMP->A2 = NRF_FICR->TEMP.A2;
|
|
NRF_TEMP->A3 = NRF_FICR->TEMP.A3;
|
|
NRF_TEMP->A4 = NRF_FICR->TEMP.A4;
|
|
NRF_TEMP->A5 = NRF_FICR->TEMP.A5;
|
|
NRF_TEMP->B0 = NRF_FICR->TEMP.B0;
|
|
NRF_TEMP->B1 = NRF_FICR->TEMP.B1;
|
|
NRF_TEMP->B2 = NRF_FICR->TEMP.B2;
|
|
NRF_TEMP->B3 = NRF_FICR->TEMP.B3;
|
|
NRF_TEMP->B4 = NRF_FICR->TEMP.B4;
|
|
NRF_TEMP->B5 = NRF_FICR->TEMP.B5;
|
|
NRF_TEMP->T0 = NRF_FICR->TEMP.T0;
|
|
NRF_TEMP->T1 = NRF_FICR->TEMP.T1;
|
|
NRF_TEMP->T2 = NRF_FICR->TEMP.T2;
|
|
NRF_TEMP->T3 = NRF_FICR->TEMP.T3;
|
|
NRF_TEMP->T4 = NRF_FICR->TEMP.T4;
|
|
}
|
|
|
|
#ifdef DEVELOP_IN_NRF52840
|
|
|
|
/* Workaround for Errata 103 "CCM: Wrong reset value of CCM MAXPACKETSIZE" found at the Errata document
|
|
for your device located at https://www.nordicsemi.com/DocLib */
|
|
if (errata_103()){
|
|
NRF_CCM->MAXPACKETSIZE = 0xFBul;
|
|
}
|
|
|
|
/* Workaround for Errata 115 "RAM: RAM content cannot be trusted upon waking up from System ON Idle or System OFF mode" found at the Errata document
|
|
for your device located at https://www.nordicsemi.com/DocLib */
|
|
if (errata_115()){
|
|
*(volatile uint32_t *)0x40000EE4 = (*(volatile uint32_t *)0x40000EE4 & 0xFFFFFFF0) | (*(uint32_t *)0x10000258 & 0x0000000F);
|
|
}
|
|
#endif
|
|
|
|
/* Workaround for Errata 108 "RAM: RAM content cannot be trusted upon waking up from System ON Idle or System OFF mode" found at the Errata document
|
|
for your device located at https://www.nordicsemi.com/DocLib */
|
|
if (errata_108()){
|
|
*(volatile uint32_t *)0x40000EE4 = *(volatile uint32_t *)0x10000258 & 0x0000004F;
|
|
}
|
|
|
|
/* Workaround for Errata 136 "System: Bits in RESETREAS are set when they should not be" found at the Errata document
|
|
for your device located at https://www.nordicsemi.com/DocLib */
|
|
if (errata_136()){
|
|
if (NRF_POWER->RESETREAS & POWER_RESETREAS_RESETPIN_Msk){
|
|
NRF_POWER->RESETREAS = ~POWER_RESETREAS_RESETPIN_Msk;
|
|
}
|
|
}
|
|
|
|
/* Configure GPIO pads as pPin Reset pin if Pin Reset capabilities desired. If CONFIG_GPIO_AS_PINRESET is not
|
|
defined, pin reset will not be available. One GPIO (see Product Specification to see which one) will then be
|
|
reserved for PinReset and not available as normal GPIO. */
|
|
#if defined (CONFIG_GPIO_AS_PINRESET)
|
|
|
|
#ifdef DEVELOP_IN_NRF52840
|
|
#define RESET_PIN 18
|
|
#else
|
|
#define RESET_PIN 21
|
|
#endif
|
|
|
|
if (((NRF_UICR->PSELRESET[0] & UICR_PSELRESET_CONNECT_Msk) != (UICR_PSELRESET_CONNECT_Connected << UICR_PSELRESET_CONNECT_Pos)) ||
|
|
((NRF_UICR->PSELRESET[1] & UICR_PSELRESET_CONNECT_Msk) != (UICR_PSELRESET_CONNECT_Connected << UICR_PSELRESET_CONNECT_Pos))){
|
|
NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Wen << NVMC_CONFIG_WEN_Pos;
|
|
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
|
|
NRF_UICR->PSELRESET[0] = RESET_PIN;
|
|
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
|
|
NRF_UICR->PSELRESET[1] = RESET_PIN;
|
|
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
|
|
NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Ren << NVMC_CONFIG_WEN_Pos;
|
|
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
|
|
NVIC_SystemReset();
|
|
}
|
|
#endif
|
|
|
|
SystemCoreClockUpdate();
|
|
}
|
|
|
|
static bool errata_31(void)
|
|
{
|
|
if (*(uint32_t *)0x10000130ul == 0xEul){
|
|
if (*(uint32_t *)0x10000134ul == 0x0ul){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
/* Apply by default for unknown devices until errata is confirmed fixed. */
|
|
return true;
|
|
}
|
|
|
|
static bool errata_36(void)
|
|
{
|
|
if (*(uint32_t *)0x10000130ul == 0xEul){
|
|
if (*(uint32_t *)0x10000134ul == 0x0ul){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
#ifdef DEVELOP_IN_NRF52840
|
|
if (*(uint32_t *)0x10000130ul == 0x8ul){
|
|
if (*(uint32_t *)0x10000134ul == 0x0ul){
|
|
return true;
|
|
}
|
|
if (*(uint32_t *)0x10000134ul == 0x1ul){
|
|
return true;
|
|
}
|
|
if (*(uint32_t *)0x10000134ul == 0x2ul){
|
|
return true;
|
|
}
|
|
if (*(uint32_t *)0x10000134ul == 0x3ul){
|
|
return true;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Apply by default for unknown devices until errata is confirmed fixed. */
|
|
return true;
|
|
}
|
|
|
|
static bool errata_66(void)
|
|
{
|
|
if (*(uint32_t *)0x10000130ul == 0xEul){
|
|
if (*(uint32_t *)0x10000134ul == 0x0ul){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
#ifdef DEVELOP_IN_NRF52840
|
|
if (*(uint32_t *)0x10000130ul == 0x8ul){
|
|
if (*(uint32_t *)0x10000134ul == 0x0ul){
|
|
return true;
|
|
}
|
|
if (*(uint32_t *)0x10000134ul == 0x1ul){
|
|
return true;
|
|
}
|
|
if (*(uint32_t *)0x10000134ul == 0x2ul){
|
|
return true;
|
|
}
|
|
if (*(uint32_t *)0x10000134ul == 0x3ul){
|
|
return true;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Apply by default for unknown devices until errata is confirmed fixed. */
|
|
return true;
|
|
}
|
|
|
|
static bool errata_108(void)
|
|
{
|
|
if (*(uint32_t *)0x10000130ul == 0xEul){
|
|
if (*(uint32_t *)0x10000134ul == 0x0ul){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
/* Apply by default for unknown devices until errata is confirmed fixed. */
|
|
return true;
|
|
}
|
|
|
|
static bool errata_136(void)
|
|
{
|
|
if (*(uint32_t *)0x10000130ul == 0xEul){
|
|
if (*(uint32_t *)0x10000134ul == 0x0ul){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
#ifdef DEVELOP_IN_NRF52840
|
|
if (*(uint32_t *)0x10000130ul == 0x8ul){
|
|
if (*(uint32_t *)0x10000134ul == 0x0ul){
|
|
return true;
|
|
}
|
|
if (*(uint32_t *)0x10000134ul == 0x1ul){
|
|
return true;
|
|
}
|
|
if (*(uint32_t *)0x10000134ul == 0x2ul){
|
|
return true;
|
|
}
|
|
if (*(uint32_t *)0x10000134ul == 0x3ul){
|
|
return true;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Apply by default for unknown devices until errata is confirmed fixed. */
|
|
return true;
|
|
}
|
|
|
|
|
|
#ifdef DEVELOP_IN_NRF52840
|
|
static bool errata_103(void)
|
|
{
|
|
if (*(uint32_t *)0x10000130ul == 0x8ul){
|
|
if (*(uint32_t *)0x10000134ul == 0x0ul){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
|
|
static bool errata_115(void)
|
|
{
|
|
if (*(uint32_t *)0x10000130ul == 0x8ul){
|
|
if (*(uint32_t *)0x10000134ul == 0x0ul){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
#endif
|
|
|
|
|
|
/*lint --flb "Leave library region" */
|
|
|