You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

281 lines
9.8 KiB

/*
* Copyright (c) 2019, Nordic Semiconductor ASA
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef NRFX_NVMC_H__
#define NRFX_NVMC_H__
#include <nrfx.h>
#include <hal/nrf_nvmc.h>
#include <hal/nrf_ficr.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @defgroup nrfx_nvmc NVMC driver
* @{
* @ingroup nrf_nvmc
* @brief Non-Volatile Memory Controller (NVMC) peripheral driver.
*/
/**
* @brief Function for erasing a page in flash.
*
* This function blocks until the erase operation finishes.
*
* @note Depending on the source of the code being executed,
* the CPU may be halted during the operation.
* Refer to the Product Specification for more information.
*
* @param address Address of the first word in the page to erase.
*
* @retval NRFX_SUCCESS Page erase complete.
* @retval NRFX_ERROR_INVALID_ADDR Address is not aligned to the size of the page.
*/
nrfx_err_t nrfx_nvmc_page_erase(uint32_t address);
/**
* @brief Function for erasing the user information configuration register (UICR).
*
* @note Depending on the source of the code being executed,
* the CPU may be halted during the operation.
* Refer to the Product Specification for more information.
*
* @retval NRFX_SUCCESS UICR has been successfully erased.
* @retval NRFX_ERROR_NOT_SUPPORTED UICR erase is not supported.
*/
nrfx_err_t nrfx_nvmc_uicr_erase(void);
/**
* @brief Function for erasing the whole flash memory.
*
* @note All user code and UICR will be erased.
*/
void nrfx_nvmc_all_erase(void);
#if defined(NRF_NVMC_PARTIAL_ERASE_PRESENT)
/**
* @brief Function for initiating a complete page erase split into parts (also known as partial erase).
*
* This function initiates a partial erase with the specified duration.
* To execute each part of the partial erase, use @ref nrfx_nvmc_page_partial_erase_continue.
*
* @param address Address of the first word in the page to erase.
* @param duration_ms Time in milliseconds that each partial erase will take.
*
* @retval NRFX_SUCCESS Partial erase started.
* @retval NRFX_ERROR_INVALID_ADDR Address is not aligned to the size of the page.
*
* @sa nrfx_nvmc_page_partial_erase_continue()
*/
nrfx_err_t nrfx_nvmc_page_partial_erase_init(uint32_t address, uint32_t duration_ms);
/**
* @brief Function for performing a part of the complete page erase (also known as partial erase).
*
* Each part takes the amount of time specified during the initialization.
* This function must be called several times to erase the whole page, once for each erase part.
*
* @note Using a page that was not completely erased leads to undefined behavior.
* Depending on the source of the code being executed,
* the CPU may be halted during the operation.
* Refer to the Product Specification for more information.
*
* @retval true Partial erase finished.
* @retval false Partial erase not finished.
* Call the function again to process the next part.
*/
bool nrfx_nvmc_page_partial_erase_continue(void);
#endif // defined(NRF_NVMC_PARTIAL_ERASE_PRESENT)
/**
* @brief Function for checking whether a byte is writable at the specified address.
*
* The NVMC is only able to write '0' to bits in the flash that are erased (set to '1').
* It cannot rewrite a bit back to '1'. This function checks if the value currently
* residing at the specified address can be transformed to the desired value
* without any '0' to '1' transitions.
*
* @param address Address to be checked.
* @param value Value to be checked.
*
* @retval true Byte can be written at the specified address.
* @retval false Byte cannot be written at the specified address.
* Erase the page or change the address.
*/
bool nrfx_nvmc_byte_writable_check(uint32_t address, uint8_t value);
/**
* @brief Function for writing a single byte to flash.
*
* To determine if the flash write has been completed, use @ref nrfx_nvmc_write_done_check().
*
* @note Depending on the source of the code being executed,
* the CPU may be halted during the operation.
* Refer to the Product Specification for more information.
*
* @param address Address to write to.
* @param value Value to write.
*/
void nrfx_nvmc_byte_write(uint32_t address, uint8_t value);
/**
* @brief Function for checking whether a word is writable at the specified address.
*
* The NVMC is only able to write '0' to bits in the Flash that are erased (set to '1').
* It cannot rewrite a bit back to '1'. This function checks if the value currently
* residing at the specified address can be transformed to the desired value
* without any '0' to '1' transitions.
*
* @param address Address to be checked. Must be word-aligned.
* @param value Value to be checked.
*
* @retval true Word can be written at the specified address.
* @retval false Word cannot be written at the specified address.
* Erase page or change address.
*/
bool nrfx_nvmc_word_writable_check(uint32_t address, uint32_t value);
/**
* @brief Function for writing a 32-bit word to flash.
*
* To determine if the flash write has been completed, use @ref nrfx_nvmc_write_done_check().
*
* @note Depending on the source of the code being executed,
* the CPU may be halted during the operation.
* Refer to the Product Specification for more information.
*
* @param address Address to write to. Must be word-aligned.
* @param value Value to write.
*/
void nrfx_nvmc_word_write(uint32_t address, uint32_t value);
/**
* @brief Function for writing consecutive bytes to flash.
*
* To determine if the last flash write has been completed, use @ref nrfx_nvmc_write_done_check().
*
* @note Depending on the source of the code being executed,
* the CPU may be halted during the operation.
* Refer to the Product Specification for more information.
*
* @param address Address to write to.
* @param src Pointer to the data to copy from.
* @param num_bytes Number of bytes to write.
*/
void nrfx_nvmc_bytes_write(uint32_t address, void const * src, uint32_t num_bytes);
/**
* @brief Function for writing consecutive words to flash.
*
* To determine if the last flash write has been completed, use @ref nrfx_nvmc_write_done_check().
*
* @note Depending on the source of the code being executed,
* the CPU may be halted during the operation.
* Refer to the Product Specification for more information.
*
* @param address Address to write to. Must be word-aligned.
* @param src Pointer to data to copy from. Must be word-aligned.
* @param num_words Number of words to write.
*/
void nrfx_nvmc_words_write(uint32_t address, void const * src, uint32_t num_words);
/**
* @brief Function for getting the total flash size in bytes.
*
* @return Flash total size in bytes.
*/
uint32_t nrfx_nvmc_flash_size_get(void);
/**
* @brief Function for getting the flash page size in bytes.
*
* @return Flash page size in bytes.
*/
uint32_t nrfx_nvmc_flash_page_size_get(void);
/**
* @brief Function for getting the flash page count.
*
* @return Flash page count.
*/
uint32_t nrfx_nvmc_flash_page_count_get(void);
/**
* @brief Function for checking if the last flash write has been completed.
*
* @retval true Last write completed successfully.
* @retval false Last write is still in progress.
*/
__STATIC_INLINE bool nrfx_nvmc_write_done_check(void);
#if defined(NRF_NVMC_ICACHE_PRESENT)
/**
* @brief Function for enabling the Instruction Cache (ICache).
*
* Enabling ICache reduces the amount of accesses to flash memory,
* which can boost performance and lower power consumption.
*/
__STATIC_INLINE void nrfx_nvmc_icache_enable(void);
/** @brief Function for disabling ICache. */
__STATIC_INLINE void nrfx_nvmc_icache_disable(void);
#endif // defined(NRF_NVMC_ICACHE_PRESENT)
#ifndef SUPPRESS_INLINE_IMPLEMENTATION
__STATIC_INLINE bool nrfx_nvmc_write_done_check(void)
{
return nrf_nvmc_ready_check(NRF_NVMC);
}
#if defined(NRF_NVMC_ICACHE_PRESENT)
__STATIC_INLINE void nrfx_nvmc_icache_enable(void)
{
nrf_nvmc_icache_config_set(NRF_NVMC, NRF_NVMC_ICACHE_ENABLE_WITH_PROFILING);
}
__STATIC_INLINE void nrfx_nvmc_icache_disable(void)
{
nrf_nvmc_icache_config_set(NRF_NVMC, NRF_NVMC_ICACHE_DISABLE);
}
#endif // defined(NRF_NVMC_ICACHE_PRESENT)
#endif // SUPPRESS_INLINE_IMPLEMENTATION
/** @} */
#ifdef __cplusplus
}
#endif
#endif // NRF_NVMC_H__