Christian Rotzoll
6 years ago
committed by
GitHub
GitHub
120 changed files with 19270 additions and 3251 deletions
@ -0,0 +1,93 @@ |
|||||
|
# ⚡️ Alternative platforms for the RaspiBlitz ⚡️ |
||||
|
|
||||
|
Minimum requirements: |
||||
|
* ARM V7 or V8 processor architecture (32 or 64 bit) |
||||
|
* 1 GB RAM |
||||
|
* \> 300 GB HDD |
||||
|
|
||||
|
Desirable: |
||||
|
* \> 2GB DDR3 RAM |
||||
|
* USB 3.0 or SATA connector |
||||
|
* SSD |
||||
|
* Compact case with efficient cooling (heatsink / fan) |
||||
|
* HDMI / GPIO screen |
||||
|
|
||||
|
|
||||
|
Specifications of the tested hardware: [hw_comparison.md](hw_comparison.md) |
||||
|
|
||||
|
All testers are welcome. Open an issue for your specific board to collaborate and share your experience. |
||||
|
|
||||
|
--- |
||||
|
## Armbian |
||||
|
Many SBC-s are supported: |
||||
|
https://www.armbian.com/download/ |
||||
|
|
||||
|
Tested on: |
||||
|
* Odroid XU4 with the Armbian Stretch image from https://www.armbian.com/odroid-xu4/ |
||||
|
|
||||
|
|
||||
|
Burn the image to the SDCard with [Etcher](https://www.balena.io/etcher/). |
||||
|
|
||||
|
Assemble and boot. |
||||
|
|
||||
|
`ssh root@192.168.1.122` |
||||
|
|
||||
|
password: 1234 |
||||
|
|
||||
|
Follow the instructions in the terminal. |
||||
|
|
||||
|
Continue with building the SDcard: https://github.com/rootzoll/raspiblitz#build-the-sd-card-image |
||||
|
|
||||
|
--- |
||||
|
|
||||
|
## Ubuntu |
||||
|
|
||||
|
A common distro to be supplied by the manufacturer for various boards. |
||||
|
|
||||
|
Tested on: |
||||
|
* Odroid XU4 with ubuntu-18.04.1-4.14-minimal image from https://de.eu.odroid.in/ubuntu_18.04lts/XU3_XU4_MC1_HC1_HC2 |
||||
|
|
||||
|
Burn the image to the SDCard with [Etcher](https://www.balena.io/etcher/). |
||||
|
|
||||
|
Assemble and boot. |
||||
|
|
||||
|
`ssh root@192.168.1.122` |
||||
|
|
||||
|
password: odroid |
||||
|
|
||||
|
`apt-get update` |
||||
|
|
||||
|
`apt-get upgrade` |
||||
|
|
||||
|
if there is an error: |
||||
|
>E: Could not get lock /var/lib/dpkg/lock-frontend - open (11: Resource temporarily unavailable) |
||||
|
|
||||
|
>E: Unable to acquire the dpkg frontend lock (/var/lib/dpkg/lock-frontend), is another process using it? |
||||
|
|
||||
|
run: |
||||
|
`reboot` and update as above |
||||
|
|
||||
|
Continue with building the SDcard: https://github.com/rootzoll/raspiblitz#build-the-sd-card-image |
||||
|
|
||||
|
--- |
||||
|
|
||||
|
## DietPi |
||||
|
|
||||
|
Many SBC-s are supported: |
||||
|
https://dietpi.com/#download |
||||
|
|
||||
|
Tested on: |
||||
|
|
||||
|
* Odroid HC1 |
||||
|
* Odroid HC2 (the same board with a 3.5" 12V HDD) |
||||
|
* Odroid XU4 (with HDMI screen) |
||||
|
* Raspberry Pi 3 B+ (with the default GPIO or HDMI display) |
||||
|
|
||||
|
|
||||
|
The HDMI screen tested: https://www.aliexpress.com/item/3-5-inch-LCD-HDMI-USB-Touch-Screen-Real-HD-1920x1080-LCD-Display-Py-for-Raspberri/32818537950.html |
||||
|
|
||||
|
Detailed instructions for the RaspiBlitz-on-DietPi: [/dietpi/README.md](/dietpi/README.md) |
||||
|
|
||||
|
--- |
||||
|
Extras for advanced users and powerful hardware: |
||||
|
https://github.com/openoms/bitcoin-tutorials/ |
||||
@ -0,0 +1,40 @@ |
|||||
|
# ⚡️ RaspiBlitz-on-DietPi ⚡️ |
||||
|
## Tested on the Raspberry Pi 3 B + |
||||
|
|
||||
|
### The automated building process: |
||||
|
|
||||
|
1) Download the DietPi image for the Raspberry Pi: |
||||
|
https://dietpi.com/downloads/images/DietPi_RPi-ARMv6-Stretch.7z |
||||
|
|
||||
|
2) Burn it to the SD card with [Etcher](https://www.balena.io/etcher/) |
||||
|
|
||||
|
3) Right click and download the following two files: [DietPi.txt](https://raw.githubusercontent.com/rootzoll/raspiblitz/dev/dietpi/boot/dietpi.txt), [Automation_Custom_Script.sh](https://raw.githubusercontent.com/rootzoll/raspiblitz/dev/dietpi/boot/Automation_Custom_Script.sh) |
||||
|
|
||||
|
4) Copy them to the /boot directory of the DietPi SDcard |
||||
|
|
||||
|
[DietPi.txt](https://raw.githubusercontent.com/rootzoll/raspiblitz/dev/dietpi/boot/dietpi.txt): Overwrites the default dietpi.txt. Modified the settings to automate the DietPi setup. (see the details [here](https://github.com/rootzoll/raspiblitz/tree/dev/dietpi#excerpts-from-the-customized-dietpitxt)) |
||||
|
|
||||
|
[Automation_Custom_Script.sh](https://raw.githubusercontent.com/rootzoll/raspiblitz/dev/dietpi/boot/Automation_Custom_Script.sh): Runs after DietPi installation is completed. Contains the link to download and run the build_sdcard.sh from the dev branch of @rootzoll. |
||||
|
(Optionally open the file with a text editor and uncomment (remove the `#` from the front of) the line with the branch you want to build the SDcard from.) |
||||
|
|
||||
|
5) Assemble and boot the Raspberry Pi |
||||
|
|
||||
|
Insert the SDcard, connect the HDD, network cable and power supply to boot. |
||||
|
(The default LCD will be set up automatically) |
||||
|
|
||||
|
|
||||
|
The automated setup will continue and the Raspberry Pi will restart at least twice during the process. This will take up to an hour. |
||||
|
To follow the logs during the automated building process login with `root` and press CTRL+C. |
||||
|
`tail -n1000 -f /tmp/DietPi-Update/dietpi-update.log` - follow the dietpi-update process |
||||
|
`tail -n1000 -f /var/tmp/dietpi/logs/dietpi-automation_custom_script.log` follow the output of the build_sdcard.sh |
||||
|
|
||||
|
|
||||
|
6) When the setup is finished log in as `admin`: |
||||
|
`ssh admin@[IP-OF-RASPIBLITZ]` |
||||
|
password: `raspiblitz` |
||||
|
|
||||
|
The setup continues with the [RaspiBlitz Setup Process](https://github.com/rootzoll/raspiblitz/blob/master/README.md#setup-process-detailed-documentation) |
||||
|
|
||||
|
--- |
||||
|
### To build manually: |
||||
|
[Follow the generic DietPi install process.](https://github.com/rootzoll/raspiblitz/tree/dev/dietpi#general-guide-for-the-raspiblitz-on-dietpi) |
||||
File diff suppressed because one or more lines are too long
@ -1 +1,14 @@ |
|||||
wget https://raw.githubusercontent.com/openoms/raspiblitz/raspiblitz-dev/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh raspiblitz-dev openoms |
# Use this format to build the SDcard with the Raspiblitz script: |
||||
|
# wget https://raw.githubusercontent.com/[GITHUB-USERNAME]/raspiblitz/[BRANCH]/build_sdcard.sh && sudo bash build_sdcard.sh [BRANCH] [GITHUB-USERNAME]` |
||||
|
# If you are working from a forked repo be aware of that the fork needs to be called `raspiblitz` for the git downloads to work. |
||||
|
|
||||
|
# Uncomment the line with the branch you want to build the SDcard from: |
||||
|
|
||||
|
# @rootzoll master branch: |
||||
|
# wget https://raw.githubusercontent.com/rootzoll/raspiblitz/master/build_sdcard.sh && sudo bash build_sdcard.sh |
||||
|
|
||||
|
# @rootzoll dev branch: |
||||
|
wget https://raw.githubusercontent.com/rootzoll/raspiblitz/dev/build_sdcard.sh && sudo bash build_sdcard.sh dev |
||||
|
|
||||
|
# @openoms DietPi branch: |
||||
|
# wget https://raw.githubusercontent.com/openoms/raspiblitz/DietPi/build_sdcard.sh && sudo bash build_sdcard.sh DietPi openoms |
||||
@ -0,0 +1,210 @@ |
|||||
|
# To run this script on your RaspiBlitz, copy the following line to the ssh terminal (after the #): |
||||
|
# wget https://raw.githubusercontent.com/openoms/raspiblitz/DietPi/dietpi/dietpi.display.sh && sudo chmod +x dietpi.display.sh && ./dietpi.display.sh |
||||
|
|
||||
|
# keep in mind that DietPi for Raspberry is also a stripped down Raspbian |
||||
|
echo "Detect Base Image ..." |
||||
|
baseImage="?" |
||||
|
isDietPi=$(uname -n | grep -c 'DietPi') |
||||
|
isRaspbian=$(cat /etc/os-release 2>/dev/null | grep -c 'Raspbian') |
||||
|
if [ ${isRaspbian} -gt 0 ]; then |
||||
|
baseImage="raspbian" |
||||
|
fi |
||||
|
if [ ${isDietPi} -gt 0 ]; then |
||||
|
baseImage="dietpi" |
||||
|
fi |
||||
|
if [ "${baseImage}" = "?" ]; then |
||||
|
cat /etc/os-release 2>/dev/null |
||||
|
echo "!!! FAIL !!!" |
||||
|
echo "Base Image cannot be detected or is not supported." |
||||
|
exit 1 |
||||
|
else |
||||
|
echo "OK running ${baseImage}" |
||||
|
fi |
||||
|
|
||||
|
|
||||
|
if [ "${baseImage}" = "raspbian" ]; then |
||||
|
echo "Press ENTER to install LCD and reboot ..." |
||||
|
read key |
||||
|
|
||||
|
# give Raspi a default hostname (optional) |
||||
|
sudo raspi-config nonint do_hostname "RaspiBlitz" |
||||
|
|
||||
|
# *** Display selection *** |
||||
|
dialog --title "Display" --yesno "Are you using the default display available from Amazon?\nSelect 'No' if you are using the Swiss version from play-zone.ch!" 6 80 |
||||
|
defaultDisplay=$? |
||||
|
|
||||
|
if [ "${defaultDisplay}" = "0" ]; then |
||||
|
|
||||
|
# *** RASPIBLITZ / LCD (at last - because makes a reboot) *** |
||||
|
# based on https://www.elegoo.com/tutorial/Elegoo%203.5%20inch%20Touch%20Screen%20User%20Manual%20V1.00.2017.10.09.zip |
||||
|
|
||||
|
echo "--> LCD DEFAULT" |
||||
|
cd /home/admin/ |
||||
|
sudo apt-mark hold raspberrypi-bootloader |
||||
|
git clone https://github.com/goodtft/LCD-show.git |
||||
|
sudo chmod -R 755 LCD-show |
||||
|
sudo chown -R admin:admin LCD-show |
||||
|
cd LCD-show/ |
||||
|
sudo ./LCD35-show |
||||
|
|
||||
|
else |
||||
|
|
||||
|
# Download and install the driver |
||||
|
# based on http://www.raspberrypiwiki.com/index.php/3.5_inch_TFT_800x480@60fps |
||||
|
|
||||
|
echo "--> LCD ALTERNATIVE" |
||||
|
cd /boot |
||||
|
sudo wget http://www.raspberrypiwiki.com/download/RPI-HD-35-INCH-TFT/dt-blob-For-3B-plus.bin |
||||
|
sudo mv dt-blob-For-3B-plus.bin dt-blob.bin |
||||
|
cat <<EOF >> config.txt |
||||
|
|
||||
|
dtparam=spi=off |
||||
|
dtparam=i2c_arm=off |
||||
|
|
||||
|
# Set screen size and any overscan required |
||||
|
overscan_left=0 |
||||
|
overscan_right=0 |
||||
|
overscan_top=0 |
||||
|
overscan_bottom=0 |
||||
|
framebuffer_width=800 |
||||
|
framebuffer_height=480 |
||||
|
|
||||
|
|
||||
|
enable_dpi_lcd=1 |
||||
|
display_default_lcd=1 |
||||
|
dpi_group=2 |
||||
|
dpi_mode=87 |
||||
|
dpi_output_format=0x6f015 |
||||
|
|
||||
|
# set up the size to 800x480 |
||||
|
hdmi_timings=480 0 16 16 24 800 0 4 2 2 0 0 0 60 0 32000000 6 |
||||
|
|
||||
|
#rotate screen |
||||
|
display_rotate=3 |
||||
|
|
||||
|
dtoverlay=i2c-gpio,i2c_gpio_scl=24,i2c_gpio_sda=23 |
||||
|
fi |
||||
|
EOF |
||||
|
init 6 |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
|
||||
|
if [ "${baseImage}" = "dietpi" ]; then |
||||
|
|
||||
|
OPTIONS=(GPIO "Install the default display available from Amazon" \ |
||||
|
HDMI "Install the 3.5\" HDMI display from Aliexpress" \ |
||||
|
SWISS "Install the Swiss version from play-zone.ch" |
||||
|
) |
||||
|
|
||||
|
CHOICE=$(dialog --backtitle "RaspiBlitz - Display Install" --clear --title "Display Install" --menu "Choose a your diplay:" 10 70 6 "${OPTIONS[@]}" 2>&1 >/dev/tty) |
||||
|
|
||||
|
if [ "${CHOICE}" = "GPIO" ]; then |
||||
|
echo "Installing the default display available from Amazon" |
||||
|
|
||||
|
# based on https://www.elegoo.com/tutorial/Elegoo%203.5%20inch%20Touch%20Screen%20User%20Manual%20V1.00.2017.10.09.zip |
||||
|
cd /home/admin/ |
||||
|
#sudo apt-mark hold raspberrypi-bootloader |
||||
|
git clone https://github.com/goodtft/LCD-show.git |
||||
|
sudo chmod -R 755 LCD-show |
||||
|
sudo chown -R admin:admin LCD-show |
||||
|
cd LCD-show/ |
||||
|
# sudo ./LCD35-show |
||||
|
sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf |
||||
|
sudo mkdir /etc/X11/xorg.conf.d |
||||
|
sudo cp ./usr/tft35a-overlay.dtb /boot/overlays/ |
||||
|
sudo cp ./usr/tft35a-overlay.dtb /boot/overlays/tft35a.dtbo |
||||
|
sudo cp -rf ./usr/99-calibration.conf-35 /etc/X11/xorg.conf.d/99-calibration.conf |
||||
|
sudo cp -rf ./usr/99-fbturbo.conf /usr/share/X11/xorg.conf.d/ |
||||
|
sudo cp ./usr/cmdline.txt /DietPi/ |
||||
|
sudo cp ./usr/inittab /etc/ |
||||
|
sudo cp ./boot/config-35.txt /DietPi/config.txt |
||||
|
|
||||
|
# revert font change |
||||
|
# based on https://www.raspberrypi-spy.co.uk/2014/04/how-to-change-the-command-line-font-size/ |
||||
|
sudo sed -i 's/FONTFACE="TerminusBold"/FONTFACE="Fixed"/' /etc/default/console-setup |
||||
|
sudo sed -i 's/FONTSIZE="12x24"/FONTSIZE="8x16"/' /etc/default/console-setup |
||||
|
|
||||
|
echo "***" |
||||
|
echo "reboot with \`sudo reboot\` to make the LCD work" |
||||
|
echo "***" |
||||
|
|
||||
|
exit |
||||
|
|
||||
|
elif [ "${CHOICE}" = "HDMI" ]; then |
||||
|
echo "Installing the 3.5\" HDMI display from Aliexpress" |
||||
|
|
||||
|
# based on http://www.lcdwiki.com/3.5inch_HDMI_Display-B |
||||
|
git clone https://github.com/goodtft/LCD-show.git |
||||
|
sudo chmod -R 755 LCD-show |
||||
|
cd LCD-show/ |
||||
|
#sudo ./MPI3508-show |
||||
|
sudo rm -rf /etc/X11/xorg.conf.d/40-libinput.conf |
||||
|
sudo cp -rf ./boot/config-35-480X320.txt /DietPi/config.txt |
||||
|
sudo cp ./usr/cmdline.txt /DietPi/ |
||||
|
sudo cp ./usr/inittab /etc/ |
||||
|
sudo cp -rf ./usr/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf |
||||
|
sudo mkdir -p /etc/X11/xorg.conf.d |
||||
|
sudo cp -rf ./usr/99-calibration.conf-3508 /etc/X11/xorg.conf.d/99-calibration.conf |
||||
|
|
||||
|
# based on https://www.raspberrypi-spy.co.uk/2014/04/how-to-change-the-command-line-font-size/ |
||||
|
sudo sed -i 's/FONTFACE="Fixed"/FONTFACE="TerminusBold"/' /etc/default/console-setup |
||||
|
sudo sed -i 's/FONTSIZE="8x16"/FONTSIZE="12x24"/' /etc/default/console-setup |
||||
|
|
||||
|
echo "***" |
||||
|
echo "reboot with \`sudo reboot\` to make the LCD work" |
||||
|
echo "***" |
||||
|
|
||||
|
exit |
||||
|
|
||||
|
elif [ "${CHOICE}" = "SWISS" ]; then |
||||
|
|
||||
|
# Download and install the driver |
||||
|
# based on http://www.raspberrypiwiki.com/index.php/3.5_inch_TFT_800x480@60fps |
||||
|
|
||||
|
echo "--> LCD ALTERNATIVE" |
||||
|
|
||||
|
# revert font change |
||||
|
# based on https://www.raspberrypi-spy.co.uk/2014/04/how-to-change-the-command-line-font-size/ |
||||
|
sudo sed -i 's/FONTFACE="TerminusBold"/FONTFACE="Fixed"/' /etc/default/console-setup |
||||
|
sudo sed -i 's/FONTSIZE="12x24"/FONTSIZE="8x16"/' /etc/default/console-setup |
||||
|
|
||||
|
cd /DietPi |
||||
|
sudo wget http://www.raspberrypiwiki.com/download/RPI-HD-35-INCH-TFT/dt-blob-For-3B-plus.bin |
||||
|
sudo mv dt-blob-For-3B-plus.bin dt-blob.bin |
||||
|
cat <<EOF >> config.txt |
||||
|
|
||||
|
dtparam=spi=off |
||||
|
dtparam=i2c_arm=off |
||||
|
|
||||
|
# Set screen size and any overscan required |
||||
|
overscan_left=0 |
||||
|
overscan_right=0 |
||||
|
overscan_top=0 |
||||
|
overscan_bottom=0 |
||||
|
framebuffer_width=800 |
||||
|
framebuffer_height=480 |
||||
|
|
||||
|
|
||||
|
enable_dpi_lcd=1 |
||||
|
display_default_lcd=1 |
||||
|
dpi_group=2 |
||||
|
dpi_mode=87 |
||||
|
dpi_output_format=0x6f015 |
||||
|
|
||||
|
# set up the size to 800x480 |
||||
|
hdmi_timings=480 0 16 16 24 800 0 4 2 2 0 0 0 60 0 32000000 6 |
||||
|
|
||||
|
#rotate screen |
||||
|
display_rotate=3 |
||||
|
|
||||
|
dtoverlay=i2c-gpio,i2c_gpio_scl=24,i2c_gpio_sda=23 |
||||
|
fi |
||||
|
EOF |
||||
|
init 6 |
||||
|
fi |
||||
|
|
||||
|
else |
||||
|
echo "CANCEL" |
||||
|
exit |
||||
|
fi |
||||
@ -1,2 +0,0 @@ |
|||||
#!/bin/bash |
|
||||
/usr/bin/env python3 infoblitzd.py $@ |
|
||||
@ -0,0 +1,469 @@ |
|||||
|
#!/bin/bash |
||||
|
echo "Starting the main menu ..." |
||||
|
|
||||
|
# CONFIGFILE - configuration of RaspiBlitz |
||||
|
configFile="/mnt/hdd/raspiblitz.conf" |
||||
|
|
||||
|
# INFOFILE - state data from bootstrap |
||||
|
infoFile="/home/admin/raspiblitz.info" |
||||
|
|
||||
|
# check if HDD is connected |
||||
|
hddExists=$(lsblk | grep -c sda1) |
||||
|
if [ ${hddExists} -eq 0 ]; then |
||||
|
|
||||
|
# check if there is maybe a HDD but woth no partitions |
||||
|
noPartition=$(lsblk | grep -c sda) |
||||
|
if [ ${noPartition} -eq 1 ]; then |
||||
|
echo "***********************************************************" |
||||
|
echo "WARNING: HDD HAS NO PARTITIONS" |
||||
|
echo "***********************************************************" |
||||
|
echo "Press ENTER to create a Partition - or CTRL+C to abort" |
||||
|
read key |
||||
|
echo "Creating Partition ..." |
||||
|
sudo parted -s /dev/sda unit s mkpart primary `sudo parted /dev/sda unit s print free | grep 'Free Space' | tail -n 1` |
||||
|
echo "DONE." |
||||
|
sleep 3 |
||||
|
else |
||||
|
echo "***********************************************************" |
||||
|
echo "WARNING: NO HDD FOUND -> Shutdown, connect HDD and restart." |
||||
|
echo "***********************************************************" |
||||
|
exit |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
# check data from _bootstrap.sh that was running on device setup |
||||
|
bootstrapInfoExists=$(ls $infoFile | grep -c '.info') |
||||
|
if [ ${bootstrapInfoExists} -eq 0 ]; then |
||||
|
echo "***********************************************************" |
||||
|
echo "WARNING: NO raspiblitz.info FOUND -> bootstrap not running?" |
||||
|
echo "***********************************************************" |
||||
|
exit |
||||
|
fi |
||||
|
|
||||
|
# load the data from the info file (will get produced on every startup) |
||||
|
source ${infoFile} |
||||
|
|
||||
|
if [ "${state}" = "recovering" ]; then |
||||
|
echo "***********************************************************" |
||||
|
echo "WARNING: bootstrap still updating - close SSH, login later" |
||||
|
echo "To monitor progress --> tail -n1000 -f raspiblitz.log" |
||||
|
echo "***********************************************************" |
||||
|
exit |
||||
|
fi |
||||
|
|
||||
|
# signal that after bootstrap recover user dialog is needed |
||||
|
recoveredInfoExists=$(sudo ls /home/admin/raspiblitz.recover.info 2>/dev/null | grep -c '.info') |
||||
|
if [ ${recoveredInfoExists} -gt 0 ]; then |
||||
|
echo "System recovered - needs final user settings" |
||||
|
/home/admin/20recoverDialog.sh |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# signal that a reindex was triggered |
||||
|
if [ "${state}" = "reindex" ]; then |
||||
|
echo "Re-Index in progress ... start monitoring:" |
||||
|
/home/admin/config.scripts/network.reindex.sh |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# singal that torrent is in re-download |
||||
|
if [ "${state}" = "retorrent" ]; then |
||||
|
echo "Re-Index in progress ... start monitoring:" |
||||
|
/home/admin/50torrentHDD.sh |
||||
|
sudo sed -i "s/^state=.*/state=repair/g" /home/admin/raspiblitz.info |
||||
|
/home/admin/00raspiblitz.sh |
||||
|
exit |
||||
|
fi |
||||
|
|
||||
|
# if pre-sync is running - stop it - before continue |
||||
|
if [ "${state}" = "presync" ]; then |
||||
|
# stopping the pre-sync |
||||
|
echo "" |
||||
|
# analyse if blockchain was detected broken by pre-sync |
||||
|
blockchainBroken=$(sudo tail /mnt/hdd/bitcoin/debug.log 2>/dev/null | grep -c "Please restart with -reindex or -reindex-chainstate to recover.") |
||||
|
if [ ${blockchainBroken} -eq 1 ]; then |
||||
|
# dismiss if its just a date thing |
||||
|
futureBlock=$(sudo tail /mnt/hdd/bitcoin/debug.log 2>/dev/null | grep "Please restart with -reindex or -reindex-chainstate to recover." | grep -c "block database contains a block which appears to be from the future") |
||||
|
if [ ${futureBlock} -gt 0 ]; then |
||||
|
blockchainBroken=0 |
||||
|
echo "-> Ignore reindex - its just a future block" |
||||
|
fi |
||||
|
fi |
||||
|
if [ ${blockchainBroken} -eq 1 ]; then |
||||
|
echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" |
||||
|
echo "Detected corrupted blockchain on pre-sync !" |
||||
|
echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" |
||||
|
echo "Deleting blockchain data ..." |
||||
|
echo "(needs to get downloaded fresh during setup)" |
||||
|
sudo rm -f -r /mnt/hdd/bitcoin |
||||
|
else |
||||
|
echo "************************************" |
||||
|
echo "Preparing ... pls wait (up to 1min) " |
||||
|
echo "************************************" |
||||
|
sudo -u root bitcoin-cli -conf=/home/admin/assets/bitcoin.conf stop 2>/dev/null |
||||
|
echo "Calling presync to finish up .." |
||||
|
sleep 50 |
||||
|
fi |
||||
|
|
||||
|
# unmount the temporary mount |
||||
|
echo "Unmount HDD .." |
||||
|
sudo umount -l /mnt/hdd |
||||
|
sleep 3 |
||||
|
|
||||
|
# update info file |
||||
|
state=waitsetup |
||||
|
sudo sed -i "s/^state=.*/state=waitsetup/g" $infoFile |
||||
|
sudo sed -i "s/^message=.*/message='Pre-Sync Stopped'/g" $infoFile |
||||
|
fi |
||||
|
|
||||
|
# if state=ready -> setup is done or started |
||||
|
if [ "${state}" = "ready" ]; then |
||||
|
configExists=$(ls ${configFile} | grep -c '.conf') |
||||
|
if [ ${configExists} -eq 1 ]; then |
||||
|
echo "loading config data" |
||||
|
source ${configFile} |
||||
|
else |
||||
|
echo "setup still in progress - setupStep(${setupStep})" |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
## default menu settings |
||||
|
# to fit the main menu without scrolling: |
||||
|
HEIGHT=13 |
||||
|
WIDTH=64 |
||||
|
CHOICE_HEIGHT=6 |
||||
|
BACKTITLE="RaspiBlitz" |
||||
|
TITLE="" |
||||
|
MENU="Choose one of the following options:" |
||||
|
OPTIONS=() |
||||
|
|
||||
|
# check if RTL web interface is installed |
||||
|
runningRTL=$(sudo ls /etc/systemd/system/RTL.service 2>/dev/null | grep -c 'RTL.service') |
||||
|
|
||||
|
# function to use later |
||||
|
waitUntilChainNetworkIsReady() |
||||
|
{ |
||||
|
source ${configFile} |
||||
|
echo "checking ${network}d - please wait .." |
||||
|
echo "can take longer if device was off or first time" |
||||
|
while : |
||||
|
do |
||||
|
|
||||
|
# check for error on network |
||||
|
sudo -u bitcoin ${network}-cli -datadir=/home/bitcoin/.${network} getblockchaininfo 1>/dev/null 2>error.tmp |
||||
|
clienterror=`cat error.tmp` |
||||
|
rm error.tmp |
||||
|
|
||||
|
# check for missing blockchain data |
||||
|
minSize=250000000000 |
||||
|
if [ "${network}" = "litecoin" ]; then |
||||
|
minSize=20000000000 |
||||
|
fi |
||||
|
blockchainsize=$(sudo du -shbc /mnt/hdd/${network} 2>/dev/null | head -n1 | awk '{print $1;}') |
||||
|
if [ ${#blockchainsize} -gt 0 ]; then |
||||
|
if [ ${blockchainsize} -lt ${minSize} ]; then |
||||
|
echo "blockchainsize(${blockchainsize})" |
||||
|
echo "Missing Blockchain Data (<${minSize}) ..." |
||||
|
clienterror="missing blockchain" |
||||
|
sleep 3 |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
if [ ${#clienterror} -gt 0 ]; then |
||||
|
|
||||
|
# analyse LOGS for possible reindex |
||||
|
reindex=$(sudo cat /mnt/hdd/${network}/debug.log 2>/dev/null | grep -c 'Please restart with -reindex or -reindex-chainstate to recover') |
||||
|
if [ ${reindex} -gt 0 ]; then |
||||
|
# dismiss if its just a date thing |
||||
|
futureBlock=$(sudo tail /mnt/hdd/${network}/debug.log 2>/dev/null | grep "Please restart with -reindex or -reindex-chainstate to recover" | grep -c "block database contains a block which appears to be from the future") |
||||
|
if [ ${futureBlock} -gt 0 ]; then |
||||
|
blockchainBroken=0 |
||||
|
echo "-> Ignore reindex - its just a future block" |
||||
|
fi |
||||
|
fi |
||||
|
if [ ${reindex} -gt 0 ] || [ "${clienterror}" = "missing blockchain" ]; then |
||||
|
echo "!! DETECTED NEED FOR RE-INDEX in debug.log ... starting repair options." |
||||
|
sudo sed -i "s/^state=.*/state=repair/g" /home/admin/raspiblitz.info |
||||
|
sleep 3 |
||||
|
|
||||
|
dialog --backtitle "RaspiBlitz - Repair Script" --msgbox "Your blockchain data needs to be repaired. |
||||
|
This can be due to power problems or a failing HDD. |
||||
|
Please check the FAQ on RaspiBlitz Github |
||||
|
'My blockchain data is corrupted - what can I do?' |
||||
|
https://github.com/rootzoll/raspiblitz/blob/master/FAQ.md |
||||
|
|
||||
|
The RaspiBlitz will now try to help you on with the repair. |
||||
|
To run a BACKUP of funds & channels first is recommended. |
||||
|
" 13 65 |
||||
|
|
||||
|
clear |
||||
|
# Basic Options |
||||
|
OPTIONS=(TORRENT "Redownload Prepared Torrent (DEFAULT)" \ |
||||
|
COPY "Copy from another Computer (SKILLED)" \ |
||||
|
REINDEX "Resync thru ${network}d (TAKES VERY VERY LONG)" \ |
||||
|
BACKUP "Run Backup LND data first (optional)" |
||||
|
) |
||||
|
|
||||
|
CHOICE=$(dialog --backtitle "RaspiBlitz - Repair Script" --clear --title "Repair Blockchain Data" --menu "Choose a repair/recovery option:" 11 60 6 "${OPTIONS[@]}" 2>&1 >/dev/tty) |
||||
|
|
||||
|
clear |
||||
|
if [ "${CHOICE}" = "TORRENT" ]; then |
||||
|
echo "Starting TORRENT ..." |
||||
|
sudo sed -i "s/^state=.*/state=retorrent/g" /home/admin/raspiblitz.info |
||||
|
/home/admin/50torrentHDD.sh |
||||
|
sudo sed -i "s/^state=.*/state=repair/g" /home/admin/raspiblitz.info |
||||
|
/home/admin/00raspiblitz.sh |
||||
|
exit |
||||
|
|
||||
|
elif [ "${CHOICE}" = "COPY" ]; then |
||||
|
echo "Starting COPY ..." |
||||
|
sudo sed -i "s/^state=.*/state=recopy/g" /home/admin/raspiblitz.info |
||||
|
/home/admin/50copyHDD.sh |
||||
|
sudo sed -i "s/^state=.*/state=repair/g" /home/admin/raspiblitz.info |
||||
|
/home/admin/00raspiblitz.sh |
||||
|
exit |
||||
|
|
||||
|
elif [ "${CHOICE}" = "REINDEX" ]; then |
||||
|
echo "Starting REINDEX ..." |
||||
|
sudo /home/admin/config.scripts/network.reindex.sh |
||||
|
exit |
||||
|
|
||||
|
elif [ "${CHOICE}" = "BACKUP" ]; then |
||||
|
sudo /home/admin/config.scripts/lnd.rescue.sh backup |
||||
|
echo "PRESS ENTER to return to menu." |
||||
|
read key |
||||
|
/home/admin/00raspiblitz.sh |
||||
|
exit |
||||
|
|
||||
|
else |
||||
|
echo "CANCEL" |
||||
|
exit |
||||
|
fi |
||||
|
|
||||
|
fi |
||||
|
|
||||
|
# let 80scanLND script to the info to use |
||||
|
/home/admin/80scanLND.sh |
||||
|
if [ $? -gt 0 ]; then |
||||
|
echo "${network} error: ${clienterror}" |
||||
|
exit 0 |
||||
|
fi |
||||
|
|
||||
|
else |
||||
|
locked=$(sudo -u bitcoin /usr/local/bin/lncli --chain=${network} --network=${chain}net getinfo 2>&1 | grep -c unlock) |
||||
|
if [ ${locked} -gt 0 ]; then |
||||
|
uptime=$(awk '{printf("%d\n",$1 + 0.5)}' /proc/uptime) |
||||
|
if [ "${autoUnlock}" == "on" ] && [ ${uptime} -lt 300 ]; then |
||||
|
# give autounlock 5 min after startup to react |
||||
|
sleep 1 |
||||
|
else |
||||
|
# check how many times LND was restarted |
||||
|
source <(sudo /home/admin/config.scripts/blitz.statusscan.sh) |
||||
|
if [ ${startcountLightning} -lt 4 ]; then |
||||
|
/home/admin/AAunlockLND.sh |
||||
|
echo "Starting up Wallet ... (10sec)" |
||||
|
sleep 5 |
||||
|
sleep 5 |
||||
|
echo "please wait ... update to next screen can be slow" |
||||
|
else |
||||
|
/home/admin/80scanLND.sh lightning-error |
||||
|
echo "(exit after too much restarts/unlocks - restart to try again)" |
||||
|
exit 0 |
||||
|
fi |
||||
|
fi |
||||
|
fi |
||||
|
lndSynced=$(sudo -u bitcoin /usr/local/bin/lncli --chain=${network} --network=${chain}net getinfo 2>/dev/null | jq -r '.synced_to_chain' | grep -c true) |
||||
|
if [ ${lndSynced} -eq 0 ]; then |
||||
|
/home/admin/80scanLND.sh |
||||
|
if [ $? -gt 0 ]; then |
||||
|
exit 0 |
||||
|
fi |
||||
|
else |
||||
|
# everything is ready - return from loop |
||||
|
return |
||||
|
fi |
||||
|
fi |
||||
|
sleep 5 |
||||
|
done |
||||
|
} |
||||
|
|
||||
|
if [ ${#setupStep} -eq 0 ]; then |
||||
|
echo "WARN: no setup step found in raspiblitz.info" |
||||
|
setupStep=0 |
||||
|
fi |
||||
|
if [ ${setupStep} -eq 0 ]; then |
||||
|
|
||||
|
# check data from boostrap |
||||
|
# TODO: when olddata --> CLEAN OR MANUAL-UPDATE-INFO |
||||
|
if [ "${state}" = "olddata" ]; then |
||||
|
|
||||
|
# old data setup |
||||
|
BACKTITLE="RaspiBlitz - Manual Update" |
||||
|
TITLE="⚡ Found old RaspiBlitz Data on HDD ⚡" |
||||
|
MENU="\n ATTENTION: OLD DATA COULD CONTAIN FUNDS\n" |
||||
|
OPTIONS+=(MANUAL "read how to recover your old funds" \ |
||||
|
DELETE "erase old data, keep blockchain, reboot" ) |
||||
|
HEIGHT=11 |
||||
|
|
||||
|
else |
||||
|
|
||||
|
# show hardware test |
||||
|
/home/admin/05hardwareTest.sh |
||||
|
|
||||
|
# start setup |
||||
|
BACKTITLE="RaspiBlitz - Setup" |
||||
|
TITLE="⚡ Welcome to your RaspiBlitz ⚡" |
||||
|
MENU="\nChoose how you want to setup your RaspiBlitz: \n " |
||||
|
OPTIONS+=(BITCOIN "Setup BITCOIN and Lightning (DEFAULT)" \ |
||||
|
LITECOIN "Setup LITECOIN and Lightning (EXPERIMENTAL)" ) |
||||
|
HEIGHT=11 |
||||
|
|
||||
|
fi |
||||
|
|
||||
|
elif [ ${setupStep} -lt 100 ]; then |
||||
|
|
||||
|
# continue setup |
||||
|
BACKTITLE="${hostname} / ${network} / ${chain}" |
||||
|
TITLE="⚡ Welcome to your RaspiBlitz ⚡" |
||||
|
MENU="\nThe setup process is not finished yet: \n " |
||||
|
OPTIONS+=(CONTINUE "Continue Setup of your RaspiBlitz") |
||||
|
HEIGHT=10 |
||||
|
|
||||
|
else |
||||
|
|
||||
|
# check if LND needs re-setup |
||||
|
source <(sudo /home/admin/config.scripts/lnd.check.sh basic-setup) |
||||
|
if [ ${wallet} -eq 0 ] || [ ${macaroon} -eq 0 ] || [ ${config} -eq 0 ] || [ ${tls} -eq 0 ]; then |
||||
|
echo "WARN: LND needs re-setup" |
||||
|
/home/admin/70initLND.sh |
||||
|
exit 0 |
||||
|
fi |
||||
|
|
||||
|
# wait all is synced and ready |
||||
|
waitUntilChainNetworkIsReady |
||||
|
|
||||
|
# check if there is a channel.backup to activate |
||||
|
gotSCB=$(ls /home/admin/channel.backup 2>/dev/null | grep -c 'channel.backup') |
||||
|
if [ ${gotSCB} -eq 1 ]; then |
||||
|
|
||||
|
echo "*** channel.backup Recovery ***" |
||||
|
lncli restorechanbackup --multi_file=/home/admin/channel.backup 2>/home/admin/.error.tmp |
||||
|
error=`cat /home/admin/.error.tmp` |
||||
|
rm /home/admin/.error.tmp 2>/dev/null |
||||
|
|
||||
|
if [ ${#error} -gt 0 ]; then |
||||
|
|
||||
|
# output error message |
||||
|
echo "" |
||||
|
echo "!!! FAIL !!! SOMETHING WENT WRONG:" |
||||
|
echo "${error}" |
||||
|
|
||||
|
# check if its possible to give background info on the error |
||||
|
notMachtingSeed=$(echo $error | grep -c 'unable to unpack chan backup') |
||||
|
if [ ${notMachtingSeed} -gt 0 ]; then |
||||
|
echo "--> ERROR BACKGROUND:" |
||||
|
echo "The WORD SEED is not matching the channel.backup file." |
||||
|
echo "Either there was an error in the word seed list or" |
||||
|
echo "or the channel.backup file is from another RaspiBlitz." |
||||
|
echo |
||||
|
fi |
||||
|
|
||||
|
# basic info on error |
||||
|
echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" |
||||
|
echo |
||||
|
echo "You can try after full setup to restore channel.backup file again with:" |
||||
|
echo "lncli restorechanbackup --multi_file=/home/admin/channel.backup" |
||||
|
echo |
||||
|
echo "Press ENTER to continue for now ..." |
||||
|
read key |
||||
|
else |
||||
|
mv /home/admin/channel.backup /home/admin/channel.backup.done |
||||
|
dialog --title " OK channel.backup IMPORT " --msgbox " |
||||
|
LND accepted the channel.backup file you uploaded. |
||||
|
It will now take around a hour until you can see, |
||||
|
if LND was able to recover funds from your channels. |
||||
|
" 9 56 |
||||
|
fi |
||||
|
|
||||
|
fi |
||||
|
|
||||
|
#forward to main menu |
||||
|
/home/admin/00mainMenu.sh |
||||
|
exit 0 |
||||
|
|
||||
|
fi |
||||
|
|
||||
|
CHOICE=$(dialog --clear \ |
||||
|
--backtitle "$BACKTITLE" \ |
||||
|
--title "$TITLE" \ |
||||
|
--menu "$MENU" \ |
||||
|
$HEIGHT $WIDTH $CHOICE_HEIGHT \ |
||||
|
"${OPTIONS[@]}" \ |
||||
|
2>&1 >/dev/tty) |
||||
|
|
||||
|
clear |
||||
|
case $CHOICE in |
||||
|
CLOSE) |
||||
|
exit 1; |
||||
|
;; |
||||
|
BITCOIN) |
||||
|
sed -i "s/^network=.*/network=bitcoin/g" ${infoFile} |
||||
|
sed -i "s/^chain=.*/chain=main/g" ${infoFile} |
||||
|
/home/admin/10setupBlitz.sh |
||||
|
exit 1; |
||||
|
;; |
||||
|
LITECOIN) |
||||
|
sed -i "s/^network=.*/network=litecoin/g" ${infoFile} |
||||
|
sed -i "s/^chain=.*/chain=main/g" ${infoFile} |
||||
|
/home/admin/10setupBlitz.sh |
||||
|
exit 1; |
||||
|
;; |
||||
|
CONTINUE) |
||||
|
/home/admin/10setupBlitz.sh |
||||
|
exit 1; |
||||
|
;; |
||||
|
OFF) |
||||
|
echo "" |
||||
|
echo "LCD turns white when shutdown complete." |
||||
|
echo "Then wait 5 seconds and disconnect power." |
||||
|
echo "-----------------------------------------------" |
||||
|
echo "stop lnd - please wait .." |
||||
|
sudo systemctl stop lnd |
||||
|
echo "stop ${network}d (1) - please wait .." |
||||
|
sudo -u bitcoin ${network}-cli stop |
||||
|
sleep 10 |
||||
|
echo "stop ${network}d (2) - please wait .." |
||||
|
sudo systemctl stop ${network}d |
||||
|
sleep 3 |
||||
|
sync |
||||
|
echo "starting shutdown ..." |
||||
|
sudo shutdown now |
||||
|
exit 0 |
||||
|
;; |
||||
|
MANUAL) |
||||
|
echo "************************************************************************************" |
||||
|
echo "PLEASE go to RaspiBlitz FAQ:" |
||||
|
echo "https://github.com/rootzoll/raspiblitz" |
||||
|
echo "And check: How can I recover my coins from a failing RaspiBlitz?" |
||||
|
echo "************************************************************************************" |
||||
|
exit 0 |
||||
|
;; |
||||
|
DELETE) |
||||
|
sudo /home/admin/XXcleanHDD.sh |
||||
|
sudo shutdown -r now |
||||
|
exit 0 |
||||
|
;; |
||||
|
X) |
||||
|
lncli -h |
||||
|
echo "OK you now on the command line." |
||||
|
echo "You can return to the main menu with the command:" |
||||
|
echo "raspiblitz" |
||||
|
;; |
||||
|
R) |
||||
|
/home/admin/00raspiblitz.sh |
||||
|
;; |
||||
|
U) # unlock |
||||
|
/home/admin/AAunlockLND.sh |
||||
|
/home/admin/00raspiblitz.sh |
||||
|
;; |
||||
|
esac |
||||
@ -0,0 +1,177 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# A solid hardware setup is important to garantuee stability of data |
||||
|
# This script checks the hardware and gives user feedback. |
||||
|
|
||||
|
# Start with parameter "no-new-stresstest" to just use the already |
||||
|
# made stresstest report during boostrap script. |
||||
|
|
||||
|
# INFOFILE - state data from bootstrap |
||||
|
source /home/admin/raspiblitz.info |
||||
|
source /home/admin/_version.info |
||||
|
|
||||
|
clear |
||||
|
echo "*** Hardware Test Report ***" |
||||
|
echo "" |
||||
|
|
||||
|
# check for parameter |
||||
|
parameter="$1" |
||||
|
|
||||
|
if [ "${parameter}" != "no-new-stresstest" ]; then |
||||
|
sudo /home/admin/config.scripts/blitz.stresstest.sh /home/admin/stresstest.report |
||||
|
echo "" |
||||
|
fi |
||||
|
|
||||
|
# load the stresstest values |
||||
|
source /home/admin/stresstest.report |
||||
|
|
||||
|
######################### |
||||
|
# Explain Report to User |
||||
|
######################### |
||||
|
|
||||
|
# check for power issues |
||||
|
showPowerImproveInfo=0 |
||||
|
if [ ${powerWARN} -gt 0 ]; then |
||||
|
showPowerImproveInfo=1 |
||||
|
if [ ${powerFAIL} -gt 0 ]; then |
||||
|
whiptail --backtitle "RaspiBlitz v${codeVersion} - ${powerMIN}" --title " POWER SUPPLY CRITICAL " --msgbox " |
||||
|
Your power supply was FAILING the stress test (${powerMIN}). |
||||
|
Most reports of data loss are caused by weak power supplies. |
||||
|
Also a lot of RaspiBlitz setups fail because of weak power supplies. |
||||
|
To SHUTDOWN and upgrade the Power Supply is HIGHLY RECOMMENDED. |
||||
|
|
||||
|
See upcomming screen on detailed info how to improve on power supply. |
||||
|
|
||||
|
" 14 78 |
||||
|
else |
||||
|
whiptail --backtitle "RaspiBlitz v${codeVersion} - ${powerMIN}" --title " Power Supply Warning " --msgbox " |
||||
|
Your power supply seems OK - but could be better for stable operations. |
||||
|
A replacement/upgrade of the Power Supply is recommended if possible. |
||||
|
Because most reports of data loss are caused by weak power supplies. |
||||
|
|
||||
|
See upcomming screen on detailed info how to improve on power supply. |
||||
|
|
||||
|
" 12 78 |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
if [ ${#undervoltageReports} -gt 0 ]; then |
||||
|
if [ ${undervoltageReports} -gt 0 ]; then |
||||
|
showPowerImproveInfo=1 |
||||
|
whiptail --backtitle "RaspiBlitz v${codeVersion}" --title " Runtime Undervoltages Detected " --msgbox " |
||||
|
Already during runtime of RaspiBlitz Undervoltage Reports were detected. |
||||
|
A upgrade of the Power Supply is strongly recommended (see next screen). |
||||
|
|
||||
|
You should see the number of outages on your LCD as an ongoing counting. |
||||
|
Note that after replacement of power supply this number is not set to 0. |
||||
|
As long that counting is not going further up you are good. |
||||
|
|
||||
|
" 13 78 |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
if [ ${showPowerImproveInfo} -gt 0 ]; then |
||||
|
|
||||
|
whiptail --backtitle "RaspiBlitz v${codeVersion}" --title " What todo on Power Issues " --msgbox " |
||||
|
To improve on power issues an upgrade of the power supply is recommended. |
||||
|
Check if you have the latest power supply listed in your shopping list. |
||||
|
If you have that one, please report on GitHub that alternative is needed. |
||||
|
|
||||
|
In general a good power supply needs to fullfill this three points: |
||||
|
- needs to deliver at least 3 Ampere |
||||
|
- needs to deliver a stable >=5V output (big & clunky is good) |
||||
|
- needs a thick cable (low AWG score) & best is no switch |
||||
|
|
||||
|
If you think all is good with your power supply please also re-run test |
||||
|
up to 3 times. Sometimes a good power supply has 1 or 2 bad measurements. |
||||
|
|
||||
|
" 18 78 |
||||
|
|
||||
|
choice=$(whiptail --backtitle "RaspiBlitz v${codeVersion}" --title " Hardware Check " --menu "What todo about Power Issues?" 12 60 6 \ |
||||
|
TESTAGAIN "Run Test again to be sure." \ |
||||
|
CONTINUE "I take the risk - continue." \ |
||||
|
SHUTDOWN "Shutdown to change hardware." 3>&1 1>&2 2>&3) |
||||
|
if [ ${#choice} -eq 0 ]; then |
||||
|
choice="CONTINUE" |
||||
|
fi |
||||
|
if [ "${choice}" == "TESTAGAIN" ]; then |
||||
|
echo "Shutting down ..." |
||||
|
sudo /home/admin/05hardwareTest.sh |
||||
|
exit 0 |
||||
|
elif [ "${choice}" == "SHUTDOWN" ]; then |
||||
|
echo "Shutting down ..." |
||||
|
sudo shutdown now |
||||
|
exit 1 |
||||
|
else |
||||
|
echo "OK continue .." |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
# check for heat issues |
||||
|
showHeatImproveInfo=0 |
||||
|
if [ ${tempWARN} -gt 0 ]; then |
||||
|
showHeatImproveInfo=1 |
||||
|
if [ ${tempFAIL} -gt 0 ]; then |
||||
|
whiptail --backtitle "RaspiBlitz v${codeVersion} - ${tempMAX}" --title " HEAT MANAGEMENT CRITICAL " --msgbox " |
||||
|
Your RaspiBlitz is getting MUCH TOO HOT (${tempMAX}). |
||||
|
The system is getting very slow when hot - thats not a NO GO but bad. |
||||
|
An upgrade of the Heat Management is HIGHLY RECOMMENDED. |
||||
|
|
||||
|
See upcomming screen on detailed info how to improve heat management. |
||||
|
|
||||
|
" 12 78 |
||||
|
else |
||||
|
whiptail --backtitle "RaspiBlitz v${codeVersion} - ${tempMAX}" --title " Heat Management Warning " --msgbox " |
||||
|
Your RaspiBlitz is getting a bit too hot (${tempMAX}). |
||||
|
The system is getting slow when hot - thats not a NO GO but bad. |
||||
|
An upgrade of the Heat Management is recommended if possible. |
||||
|
|
||||
|
See upcomming screen on detailed info how to improve heat management. |
||||
|
|
||||
|
" 12 78 |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
if [ ${showHeatImproveInfo} -gt 0 ]; then |
||||
|
|
||||
|
whiptail --backtitle "RaspiBlitz v${codeVersion}" --title " What todo on Heat Issues " --msgbox " |
||||
|
To improve on heat issues an upgrade of the casing is recommended. |
||||
|
Check if you have the latest casing listed in your shopping list. |
||||
|
The lastest casing is a big heat sink to prevent overheating. |
||||
|
If you have that one, check if its applied correctly to CPU. |
||||
|
Alternative casings should add some passive/active heat sinks. |
||||
|
In extreme cases consider some external fan helping out. |
||||
|
|
||||
|
Again a RaspiBlitz getting hot can be tolerated. But it is |
||||
|
slowing down your CPU and may reduce the lifetime of hardware. |
||||
|
|
||||
|
" 16 72 |
||||
|
|
||||
|
choice=$(whiptail --backtitle "RaspiBlitz v${codeVersion}" --title " Hardware Check " --menu "What todo about Heat Issues?" 12 60 6 \ |
||||
|
TESTAGAIN "Run Test again to be sure." \ |
||||
|
CONTINUE "I take the risk - continue." \ |
||||
|
SHUTDOWN "Shutdown to change hardware." 3>&1 1>&2 2>&3) |
||||
|
if [ ${#choice} -eq 0 ]; then |
||||
|
choice="CONTINUE" |
||||
|
fi |
||||
|
if [ "${choice}" == "TESTAGAIN" ]; then |
||||
|
echo "Shutting down ..." |
||||
|
sudo /home/admin/05hardwareTest.sh |
||||
|
exit 0 |
||||
|
elif [ "${choice}" == "SHUTDOWN" ]; then |
||||
|
echo "Shutting down ..." |
||||
|
sudo shutdown now |
||||
|
exit 1 |
||||
|
else |
||||
|
echo "OK continue .." |
||||
|
fi |
||||
|
|
||||
|
fi |
||||
|
|
||||
|
if [ ${showPowerImproveInfo} -eq 0 ] && [ ${showHeatImproveInfo} -eq 0 ]; then |
||||
|
dialog --backtitle "RaspiBlitz v${codeVersion}" --title " Hardware Check " --msgbox " |
||||
|
RaspiBlitz hardware setup looks good :) |
||||
|
Your are ready to continue - have fun. |
||||
|
|
||||
|
" 8 43 |
||||
|
fi |
||||
@ -1,91 +1,218 @@ |
|||||
#!/bin/bash |
#!/bin/bash |
||||
|
|
||||
|
source /home/admin/_version.info |
||||
source /home/admin/raspiblitz.info |
source /home/admin/raspiblitz.info |
||||
source /mnt/hdd/raspiblitz.conf |
source /mnt/hdd/raspiblitz.conf |
||||
|
|
||||
### USER PI AUTOSTART (LCD Display) |
# all system/service info gets detected by blitz.statusscan.sh |
||||
localip=$(ip addr | grep 'state UP' -A2 | tail -n1 | awk '{print $2}' | cut -f1 -d'/') |
source <(sudo /home/admin/config.scripts/blitz.statusscan.sh) |
||||
|
|
||||
# parse the actual scanned height progress from LND logs |
# when admin and no other error found run LND setup check |
||||
item=0 |
if [ "$USER" == "admin" ] && [ ${#lndErrorFull} -eq 0 ]; then |
||||
blockchaininfo=$(sudo -u bitcoin ${network}-cli -datadir=/home/bitcoin/.${network} getblockchaininfo) |
lndErrorFull=$(sudo /home/admin/config.scripts/lnd.check.sh basic-setup | grep "err=" | tail -1) |
||||
chain="$(echo "${blockchaininfo}" | jq -r '.chain')" |
fi |
||||
|
|
||||
## TRY to get the actual progress height of scanning |
# set follow up info different for LCD and ADMIN |
||||
|
adminStr="ssh admin@${localIP} ->Password A" |
||||
|
if [ "$USER" == "admin" ]; then |
||||
|
adminStr="Use CTRL+c to EXIT to Terminal" |
||||
|
fi |
||||
|
|
||||
# 1) First try the "Rescanned through block" - it seems to happen if it restarts |
# bitcoin errors always first |
||||
item=$(sudo -u bitcoin tail -n 100 /mnt/hdd/lnd/logs/${network}/${chain}net/lnd.log | grep "Rescanned through block" | tail -n1 | cut -d ']' -f2 | cut -d '(' -f2 | tr -dc '0-9') |
if [ ${bitcoinActive} -eq 0 ] || [ ${#bitcoinErrorFull} -gt 0 ] || [ "${1}" == "blockchain-error" ]; then |
||||
action="Rescanning" |
|
||||
|
|
||||
# 2) Second try the "Caught up to height" - thats the usual on first scan start |
#################### |
||||
if [ ${#item} -eq 0 ]; then |
# On Bitcoin Error |
||||
item=$(sudo -u bitcoin tail -n 100 /mnt/hdd/lnd/logs/${network}/${chain}net/lnd.log | grep "Caught up to height" | tail -n1 | cut -d ']' -f2 | tr -dc '0-9') |
#################### |
||||
action="Catching-Up" |
|
||||
fi |
|
||||
|
|
||||
# 3) Third try the "LNWL: Filtering block" - thats the usual on later starts |
height=5 |
||||
if [ ${#item} -eq 0 ]; then |
width=43 |
||||
item=$(sudo -u bitcoin tail -n 100 /mnt/hdd/lnd/logs/${network}/${chain}net/lnd.log | grep "LNWL: Filtering block" | tail -n1 | cut -d ' ' -f7 | tr -dc '0-9') |
title="Blockchain Info" |
||||
action="Filtering" |
if [ ${uptime} -gt 600 ] || [ "${1}" == "blockchain-error" ]; then |
||||
fi |
infoStr=" The ${network}d service is not running.\n Login for more details:" |
||||
|
if [ "$USER" == "admin" ]; then |
||||
|
clear |
||||
|
echo "" |
||||
|
echo "*****************************************" |
||||
|
echo "* The ${network}d service is not running." |
||||
|
echo "*****************************************" |
||||
|
echo "If you just started some config/setup, this might be OK." |
||||
|
echo |
||||
|
if [ ${startcountBlockchain} -gt 1 ]; then |
||||
|
echo "${startcountBlockchain} RESTARTS DETECTED - ${network}d might be in a error loop" |
||||
|
cat /home/admin/systemd.blockchain.log | grep "ERROR" | tail -n -1 |
||||
|
echo |
||||
|
fi |
||||
|
if [ ${#bitcoinErrorFull} -gt 0 ]; then |
||||
|
echo "More Error Detail:" |
||||
|
echo ${bitcoinErrorFull} |
||||
|
echo |
||||
|
fi |
||||
|
echo "-> Use following command to debug: /home/admin/XXdebugLogs.sh" |
||||
|
echo "-> To force Main Menu run: /home/admin/00mainMenu.sh" |
||||
|
echo "-> To try restart: sudo shutdown -r now" |
||||
|
echo "" |
||||
|
fi |
||||
|
else |
||||
|
height=6 |
||||
|
if [ ${#bitcoinErrorShort} -eq 0 ]; then |
||||
|
bitcoinErrorShort="Initial Startup - Please Wait" |
||||
|
fi |
||||
|
infoStr=" The ${network}d service is starting:\n ${bitcoinErrorShort}\n Login with SSH for more details:" |
||||
|
if [ "$USER" == "admin" ]; then |
||||
|
infoStr=" The ${network}d service is starting:\n ${bitcoinErrorShort}\n Please wait up to 5min ..." |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
# if no progress info |
# LND errors second |
||||
online=1 |
elif [ ${lndActive} -eq 0 ] || [ ${#lndErrorFull} -gt 0 ] || [ "${1}" == "lightning-error" ]; then |
||||
if [ ${#item} -eq 0 ]; then |
|
||||
item="?" |
|
||||
|
|
||||
# check if offline |
#################### |
||||
# https://en.wikipedia.org/wiki/1.1.1.1 |
# On LND Error |
||||
online=$(ping 1.1.1.1 -c 1 -W 2 | grep -c '1 received') |
#################### |
||||
fi |
|
||||
|
|
||||
# get total number of blocks |
height=5 |
||||
total=$(echo "${blockchaininfo}" | jq -r '.blocks') |
width=43 |
||||
# put scanstate |
title="Lightning Info" |
||||
scanstate="${item}/${total}" |
if [ ${uptime} -gt 600 ] || [ "${1}" == "lightning-error" ]; then |
||||
|
if [ ${#lndErrorShort} -gt 0 ]; then |
||||
# get blockchain sync progress |
height=6 |
||||
progress="$(echo "${blockchaininfo}" | jq -r '.verificationprogress')" |
lndErrorShort=" ${lndErrorShort}\n" |
||||
progress=$(echo "${progress}*100" | bc) |
fi |
||||
|
if [ ${lndActive} -eq 0 ]; then |
||||
# check if blockchain is still syncing |
infoStr=" The LND service is not running.\n${lndErrorShort} Login for more details:" |
||||
heigh=6 |
else |
||||
width=44 |
infoStr=" The LND service is running with error.\n${lndErrorShort} Login for more details:" |
||||
isInitialChainSync=$(echo "${blockchaininfo}" | grep 'initialblockdownload' | grep "true" -c) |
fi |
||||
isWaitingBlockchain=$( sudo -u bitcoin tail -n 2 /mnt/hdd/lnd/logs/${network}/${chain}net/lnd.log | grep "Waiting for chain backend to finish sync" -c ) |
if [ "$USER" == "admin" ]; then |
||||
if [ ${isWaitingBlockchain} -gt 0 ]; then |
clear |
||||
isInitialChainSync=1 |
echo "" |
||||
fi |
echo "****************************************" |
||||
if [ ${online} -eq 0 ]; then |
if [ ${lndActive} -eq 0 ]; then |
||||
heigh=7 |
echo "* The LND service is not running." |
||||
width=44 |
else |
||||
infoStr=$(echo " Waiting INTERNET CONNECTION\n RaspiBlitz cannot ping 1.1.1.1\n Local IP is ${localip}\n Please check cables and router.") |
echo "* The LND service is running with error." |
||||
elif [ ${isInitialChainSync} -gt 0 ]; then |
fi |
||||
heigh=7 |
echo "****************************************" |
||||
infoStr=" Waiting for final Blockchain Sync\n Progress: ${progress} %\n Please wait - this can take some time.\n ssh admin@${localip}\n Password A" |
echo "If you just started some config/setup, this might be OK." |
||||
if [ "$USER" = "admin" ]; then |
echo |
||||
heigh=6 |
if [ ${startcountLightning} -gt 1 ]; then |
||||
width=53 |
echo "${startcountLightning} RESTARTS DETECTED - LND might be in a error loop" |
||||
infoStr=$(echo " Waiting for final Blockchain Sync\n Progress: ${progress} %\n Please wait - this can take some long time.\n Its OK to close terminal and ssh back in later.") |
cat /home/admin/systemd.lightning.log | grep "ERROR" | tail -n -1 |
||||
|
fi |
||||
|
sudo journalctl -u lnd -b --no-pager -n14 | grep "lnd\[" |
||||
|
sudo /home/admin/config.scripts/lnd.check.sh basic-setup | grep "err=" |
||||
|
if [ ${#lndErrorFull} -gt 0 ]; then |
||||
|
echo "More Error Detail:" |
||||
|
echo ${lndErrorFull} |
||||
|
fi |
||||
|
echo |
||||
|
echo "-> Use following command to debug: /home/admin/XXdebugLogs.sh" |
||||
|
echo "-> To force Main Menu run: /home/admin/00mainMenu.sh" |
||||
|
echo "-> To try restart: sudo shutdown -r now" |
||||
|
echo "" |
||||
|
exit 1 |
||||
|
else |
||||
|
source <(sudo /home/admin/config.scripts/lnd.check.sh basic-setup) |
||||
|
if [ ${wallet} -eq 0 ] || [ ${macaroon} -eq 0 ] || [ ${config} -eq 0 ] || [ ${tls} -eq 0 ]; then |
||||
|
infoStr=" The LND service needs RE-SETUP.\n Login with SSH to continue:" |
||||
|
fi |
||||
|
fi |
||||
|
else |
||||
|
infoStr=" The LND service is starting.\n Login for more details:" |
||||
|
if [ "$USER" == "admin" ]; then |
||||
|
infoStr=" The LND service is starting.\n Please wait up to 5min ..." |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
# if LND wallet is locked |
||||
|
elif [ ${walletLocked} -gt 0 ]; then |
||||
|
|
||||
|
height=5 |
||||
|
width=43 |
||||
|
|
||||
|
if [ "${autoUnlock}" = "on" ]; then |
||||
|
title="Auto Unlock" |
||||
|
infoStr=" Waiting for Wallet Auto-Unlock.\n Please wait up to 5min ..." |
||||
|
else |
||||
|
title="Action Required" |
||||
|
infoStr=" LND WALLET IS LOCKED !!!\n" |
||||
|
if [ "${rtlWebinterface}" = "on" ]; then |
||||
|
height=6 |
||||
|
infoStr="${infoStr} Browser: http://${localIP}:3000\n PasswordB=login / PasswordC=unlock" |
||||
|
else |
||||
|
infoStr="${infoStr} Please use SSH to unlock:" |
||||
|
fi |
||||
|
if [ ${startcountLightning} -gt 1 ]; then |
||||
|
width=45 |
||||
|
height=$((height+3)) |
||||
|
infoStr=" LIGHTNING RESTARTED - login for details\n${infoStr}" |
||||
|
adminStr="${adminStr}\n or choose 'INFO' in main menu\n or type 'raspiblitz' on terminal" |
||||
|
fi |
||||
fi |
fi |
||||
|
|
||||
else |
else |
||||
heigh=7 |
|
||||
# check if wallet has any UTXO |
#################### |
||||
# reason see: https://github.com/lightningnetwork/lnd/issues/2326 |
# Sync Progress |
||||
txlines=$(sudo -u bitcoin lncli listchaintxns 2>/dev/null | wc -l) |
#################### |
||||
# has just 4 lines if empty |
|
||||
if [ ${txlines} -eq 4 ]; then |
# basic dialog info |
||||
infoStr=$(echo " Lightning ${action} Blockchain\n Progress: ${scanstate}\n re-rescan every start until funding\n ssh admin@${localip}\n Password A") |
height=6 |
||||
|
width=43 |
||||
|
title="Node is Syncing (${scriptRuntime})" |
||||
|
actionString="Please wait - this can take some time" |
||||
|
|
||||
|
# formatting BLOCKCHAIN SYNC PROGRESS |
||||
|
if [ ${#syncProgress} -eq 0 ]; then |
||||
|
if [ ${startcountBlockchain} -lt 2 ]; then |
||||
|
syncProgress="waiting" |
||||
|
else |
||||
|
syncProgress="${startcountBlockchain} restarts" |
||||
|
actionString="Login with SSH for more details:" |
||||
|
fi |
||||
|
elif [ ${#syncProgress} -lt 6 ]; then |
||||
|
syncProgress=" ${syncProgress} %" |
||||
else |
else |
||||
infoStr=$(echo " Lightning ${action} Blockchain\n Progress: ${scanstate}\n Please wait - this can take some time\n ssh admin@${localip}\n Password A") |
syncProgress="${syncProgress} %" |
||||
if [ "$USER" = "admin" ]; then |
fi |
||||
heigh=6 |
|
||||
width=53 |
|
||||
infoStr=$(echo " Lightning ${action} Blockchain\n Progress: ${scanstate}\n Please wait - this can take some long time.\n Its OK to close terminal and ssh back in later.") |
# formatting LIGHTNING SCAN PROGRESS |
||||
|
if [ ${#scanProgress} -eq 0 ]; then |
||||
|
|
||||
|
# in case of LND RPC is not ready yet |
||||
|
if [ ${scanTimestamp} -eq -2 ]; then |
||||
|
|
||||
|
scanProgress="prepare sync" |
||||
|
|
||||
|
# in case LND restarting >2 |
||||
|
elif [ ${startcountLightning} -gt 2 ]; then |
||||
|
|
||||
|
scanProgress="${startcountLightning} restarts" |
||||
|
actionString="Login with SSH for more details:" |
||||
|
|
||||
|
# check if a specific error can be identified for restarts |
||||
|
lndSetupErrorCount=$(sudo /home/admin/config.scripts/lnd.check.sh basic-setup | grep -c "err=") |
||||
|
if [ ${lndSetupErrorCount} -gt 0 ]; then |
||||
|
scanProgress="possible error" |
||||
|
fi |
||||
|
|
||||
|
# unkown cases |
||||
|
else |
||||
|
scanProgress="waiting" |
||||
fi |
fi |
||||
|
|
||||
|
elif [ ${#scanProgress} -lt 6 ]; then |
||||
|
scanProgress=" ${scanProgress} %" |
||||
|
else |
||||
|
scanProgress="${scanProgress} %" |
||||
fi |
fi |
||||
|
|
||||
|
# setting info string |
||||
|
infoStr=" Blockchain Progress : ${syncProgress}\n Lightning Progress : ${scanProgress}\n ${actionString}" |
||||
|
|
||||
fi |
fi |
||||
|
|
||||
# display progress to user |
# display info to user |
||||
sleep 3 |
dialog --title " ${title} " --backtitle "RaspiBlitz ${codeVersion} ${hostname} / ${network} / ${chain} / ${tempCelsius}°C" --infobox "${infoStr}\n ${adminStr}" ${height} ${width} |
||||
dialog --title " ${network} / ${chain} " --backtitle "RaspiBlitz (${hostname})" --infobox "${infoStr}" ${heigh} ${width} |
|
||||
@ -0,0 +1,141 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# get service port from argument |
||||
|
servicePort="10009" |
||||
|
if [ $# -gt 0 ]; then |
||||
|
if [ "$1" == "RPC" ]; then |
||||
|
echo "running RPC mode" |
||||
|
servicePort="10009" |
||||
|
fi |
||||
|
if [ "$1" == "REST" ]; then |
||||
|
echo "running REST mode" |
||||
|
servicePort="8080" |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
# load raspiblitz config data |
||||
|
source /home/admin/raspiblitz.info |
||||
|
source /mnt/hdd/raspiblitz.conf |
||||
|
|
||||
|
# export go vars (if needed) |
||||
|
if [ ${#GOROOT} -eq 0 ]; then |
||||
|
export GOROOT=/usr/local/go |
||||
|
export PATH=$PATH:$GOROOT/bin |
||||
|
fi |
||||
|
if [ ${#GOPATH} -eq 0 ]; then |
||||
|
export GOPATH=/usr/local/gocode |
||||
|
export PATH=$PATH:$GOPATH/bin |
||||
|
fi |
||||
|
|
||||
|
# make sure go is installed |
||||
|
goVersion="1.11" |
||||
|
echo "### Check Framework: GO ###" |
||||
|
goInstalled=$(go version 2>/dev/null | grep -c 'go') |
||||
|
if [ ${goInstalled} -eq 0 ];then |
||||
|
echo "---> Installing GO" |
||||
|
wget https://storage.googleapis.com/golang/go${goVersion}.linux-armv6l.tar.gz |
||||
|
sudo tar -C /usr/local -xzf go${goVersion}.linux-armv6l.tar.gz |
||||
|
sudo rm *.gz |
||||
|
sudo mkdir /usr/local/gocode |
||||
|
sudo chmod 777 /usr/local/gocode |
||||
|
goInstalled=$(go version 2>/dev/null | grep -c 'go') |
||||
|
fi |
||||
|
if [ ${goInstalled} -eq 0 ];then |
||||
|
echo "FAIL: Was not able to install GO (needed to run LndConnect)" |
||||
|
sleep 4 |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
correctGoVersion=$(go version | grep -c "go${goVersion}") |
||||
|
if [ ${correctGoVersion} -eq 0 ]; then |
||||
|
echo "WARNING: You work with a untested version of GO - should be ${goVersion} .. trying to continue" |
||||
|
go version |
||||
|
sleep 6 |
||||
|
echo "" |
||||
|
fi |
||||
|
|
||||
|
# make sure qrcode-encoder in installed |
||||
|
echo "*** Setup ***" |
||||
|
echo "" |
||||
|
echo "Installing lndconnect. Please wait..." |
||||
|
echo "" |
||||
|
echo "Getting github.com/LN-Zap/lndconnect (please wait - can take several minutes) ..." |
||||
|
go get -d github.com/LN-Zap/lndconnect |
||||
|
cd $GOPATH/src/github.com/LN-Zap/lndconnect |
||||
|
echo "" |
||||
|
echo "Building github.com/LN-Zap/lndconnect ..." |
||||
|
make |
||||
|
cd |
||||
|
sleep 3 |
||||
|
|
||||
|
# default host to local IP and port |
||||
|
local=1 |
||||
|
localIP=$(ip addr | grep 'state UP' -A2 | tail -n1 | awk '{print $2}' | cut -f1 -d'/') |
||||
|
host="${localIP}" |
||||
|
port="${servicePort}" |
||||
|
|
||||
|
# change host to dynDNS if set |
||||
|
if [ ${#dynDomain} -gt 0 ]; then |
||||
|
local=0 |
||||
|
host="${dynDomain}" |
||||
|
echo "port ${servicePort} forwarding from dynDomain ${host}" |
||||
|
fi |
||||
|
|
||||
|
# check if local service port is forwarded |
||||
|
if [ ${#sshtunnel} -gt 0 ]; then |
||||
|
isForwarded=$(echo ${sshtunnel} | grep -c "${servicePort}<") |
||||
|
if [ ${isForwarded} -gt 0 ]; then |
||||
|
local=0 |
||||
|
host=$(echo $sshtunnel | cut -d '@' -f2 | cut -d ' ' -f1) |
||||
|
if [ "${servicePort}" == "10009" ]; then |
||||
|
port=$(echo $sshtunnel | awk '{split($0,a,"10009<"); print a[2]}' | cut -d ' ' -f1 | sed 's/[^0-9]//g') |
||||
|
elif [ "${servicePort}" == "8080" ]; then |
||||
|
port=$(echo $sshtunnel | awk '{split($0,a,"8080<"); print a[2]}' | cut -d ' ' -f1 | sed 's/[^0-9]//g') |
||||
|
fi |
||||
|
echo "port ${servicePort} forwarding from port ${port} from server ${host}" |
||||
|
else |
||||
|
echo "port ${servicePort} is not part of the ssh forwarding - keep default port ${servicePort}" |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
# write qr code data to an image |
||||
|
lndconnect --host=${host} --port=${port} --image |
||||
|
|
||||
|
# display qr code image on LCD |
||||
|
./XXdisplayLCD.sh lndconnect-qr.png |
||||
|
|
||||
|
# show pairing info dialog |
||||
|
msg="" |
||||
|
if [ ${local} -eq 1 ]; then |
||||
|
msg="Make sure you are on the same local network.\n(WLAN same as LAN - use WIFI not cell network on phone).\n\n" |
||||
|
fi |
||||
|
msg="You should now see the pairing QR code on the RaspiBlitz LCD.\n\n${msg}When you start the App choose to connect to your own node.\n(DIY / Remote-Node / lndconnect)\n\nClick on the 'Scan QR' button. Scan the QR on the LCD and <continue> or <show QR code> to see it in this window." |
||||
|
whiptail --backtitle "Connecting Mobile Wallet" \ |
||||
|
--title "Pairing by QR code" \ |
||||
|
--yes-button "continue" \ |
||||
|
--no-button "show QR code" \ |
||||
|
--yesno "${msg}" 20 65 |
||||
|
if [ $? -eq 1 ]; then |
||||
|
lndconnect --host=${host} --port=${port} |
||||
|
echo "(To shrink QR code: OSX->CMD- / LINUX-> CTRL-) Press ENTER when finished." |
||||
|
read key |
||||
|
fi |
||||
|
|
||||
|
# clean up |
||||
|
./XXdisplayQRlcd_hide.sh |
||||
|
shred lndconnect-qr.png 2> /dev/null |
||||
|
rm -f lndconnect-qr.png 2> /dev/null |
||||
|
shred qr.txt 2> /dev/null |
||||
|
rm -f qr.txt 2> /dev/null |
||||
|
|
||||
|
echo "------------------------------" |
||||
|
echo "If the connection was not working:" |
||||
|
if [ ${#dynDomain} -gt 0 ]; then |
||||
|
echo "- Make sure that your router is forwarding port ${port} to the Raspiblitz with IP ${localIP}" |
||||
|
fi |
||||
|
if [ ${local} -eq 1 ]; then |
||||
|
echo "- Check that your WIFI devices can talk to the LAN devices on your router (deactivate IP isolation or guest mode)." |
||||
|
fi |
||||
|
echo "- check issues: https://github.com/LN-Zap/lndconnect/issues" |
||||
|
echo "- check issues: https://github.com/rootzoll/raspiblitz/issues" |
||||
|
echo "" |
||||
@ -1,55 +1,65 @@ |
|||||
#!/bin/bash |
#!/bin/bash |
||||
|
clear |
||||
|
|
||||
# load raspiblitz config data |
# load raspiblitz config data |
||||
source /home/admin/raspiblitz.info |
source /home/admin/raspiblitz.info |
||||
source /mnt/hdd/raspiblitz.conf |
source /mnt/hdd/raspiblitz.conf |
||||
|
|
||||
# make sure qrcode-encoder in installed |
# default host to local IP & port 10009 |
||||
clear |
local=1 |
||||
echo "*** Setup ***" |
host=$(ip addr | grep 'state UP' -A2 | tail -n1 | awk '{print $2}' | cut -f1 -d'/') |
||||
sudo apt-get install qrencode -y |
port="10009" |
||||
|
|
||||
# get local IP |
# change host to dynDNS if set |
||||
myip=$(ifconfig | sed -En 's/127.0.0.1//;s/.*inet (addr:)?(([0-9]*\.){3}[0-9]*).*/\2/p') |
if [ ${#dynDomain} -gt 0 ]; then |
||||
|
local=0 |
||||
|
host="${dynDomain}" |
||||
|
echo "port 10009 forwarding from dynDomain ${host}" |
||||
|
fi |
||||
|
|
||||
# replace dyndomain if available |
# check if port 10009 is forwarded |
||||
if [ ${#dynDomain} -gt 0 ]; then |
if [ ${#sshtunnel} -gt 0 ]; then |
||||
myip="${dynDomain}" |
isForwarded=$(echo ${sshtunnel} | grep -c "10009<") |
||||
|
if [ ${isForwarded} -gt 0 ]; then |
||||
|
local=0 |
||||
|
host=$(echo $sshtunnel | cut -d '@' -f2 | cut -d ' ' -f1) |
||||
|
port=$(echo $sshtunnel | awk '{split($0,a,"10009<"); print a[2]}' | cut -d ' ' -f1 | sed 's/[^0-9]//g') |
||||
|
echo "port 10009 forwarding from port ${port} from server ${host}" |
||||
|
else |
||||
|
echo "port 10009 is not part of the ssh forwarding - keep default port 10009" |
||||
|
fi |
||||
fi |
fi |
||||
|
|
||||
clear |
# write qr code data to text file |
||||
echo "******************************" |
echo -e "${host}:${port},\n$(xxd -p -c2000 ./.lnd/data/chain/${network}/${chain}net/admin.macaroon)," > qr.txt |
||||
echo "Connect Shango Mobile Wallet" |
|
||||
echo "******************************" |
|
||||
echo "" |
|
||||
echo "GETTING THE APP" |
|
||||
echo "At the moment this app is in public beta testing:" |
|
||||
echo "iOS: Read https://testflight.apple.com/join/WwCjFnS8 (open on device)" |
|
||||
echo "Android: https://play.google.com/apps/testing/com.shango (open on device)" |
|
||||
echo "" |
|
||||
echo "*** STEP 1 ***" |
|
||||
if [ ${#dynDomain} -eq 0 ]; then |
|
||||
echo "Once you have the app is running make sure you are on the same local network (WLAN same as LAN)." |
|
||||
fi |
|
||||
echo "On Setup Step 'Choose LND Server Type' connect to 'DIY SELF HOSTED'" |
|
||||
echo "(Or in the App go to --> 'Settings' > 'Connect to your LND Server')" |
|
||||
echo "There you see three 3 form fields to fill out. Skip those and go right to the buttons below." |
|
||||
echo "" |
|
||||
echo "Click on the 'Scan QR' button" |
|
||||
echo "Make the this terminal as big as possible - fullscreen would be best." |
|
||||
echo "Then PRESS ENTER here in the terminal to generare the QR code and scan it with the app." |
|
||||
read key |
|
||||
|
|
||||
clear |
# display qr code on LCD |
||||
echo "*** STEP 2 : SCAN MACAROON (make whole QR code fill camera) ***" |
./XXdisplayQRlcd.sh |
||||
#echo -e "${myip}:10009,\n$(xxd -p -c2000 ~/.lnd/data/chain/${network}/${chain}net/admin.macaroon)," > qr.txt && qrencode -t ANSIUTF8 < qr.txt |
|
||||
echo -e "${myip}:10009,\n$(xxd -p -c2000 ./.lnd/data/chain/${network}/${chain}net/admin.macaroon)," > qr.txt && qrencode -t ANSI256 < qr.txt |
|
||||
echo "(To shrink QR code: OSX->CMD- / LINUX-> CTRL-) Press ENTER when finished." |
|
||||
read key |
|
||||
shred qr.txt |
|
||||
|
|
||||
|
# show pairing info |
||||
clear |
clear |
||||
echo "Now press 'Connect' within the Shango Wallet." |
msg="" |
||||
echo "If its not working - check issues on GitHub:" |
if [ ${local} -eq 1 ]; then |
||||
echo "https://github.com/neogeno/shango-lightning-wallet/issues" |
msg="Once you have the app running make sure you are on the same local network (WLAN same as LAN).\n\n" |
||||
echo "" |
fi |
||||
|
msg="You should now see the pairing QR code on the RaspiBlitz LCD.\n\n${msg}On Setup Step 'Choose LND Server Type' connect to 'DIY SELF HOSTED'\n\n(Or in the App go to --> 'Settings' > 'Connect to your LND Server') \n\nThere you see three 3 form fields to fill out. Skip those and go right to the buttons below.\n\nClick on the 'Scan QR' button. Scan the QR on the LCD and <continue> or <show QR code> to see it in this window." |
||||
|
whiptail --backtitle "Connecting Shango Mobile Wallet" \ |
||||
|
--title "Setup Shango Step 1" \ |
||||
|
--yes-button "continue" \ |
||||
|
--no-button "show QR code" \ |
||||
|
--yesno "${msg}" 20 70 |
||||
|
if [ $? -eq 1 ]; then |
||||
|
/home/admin/XXdisplayQR.sh |
||||
|
fi |
||||
|
|
||||
|
# clean up |
||||
|
./XXdisplayQRlcd_hide.sh |
||||
|
shred qr.png 2> /dev/null |
||||
|
rm -f qr.png 2> /dev/null |
||||
|
shred qr.txt 2> /dev/null |
||||
|
rm -f qr.txt 2> /dev/null |
||||
|
|
||||
|
# follow up dialog |
||||
|
whiptail --backtitle "Connecting Shango Mobile Wallet" \ |
||||
|
--title "Press Connect on Shango" \ |
||||
|
--msgbox "Now press 'Connect' within the Shango Wallet.\n\nIf its not working - check issues on GitHub:\n\nhttps://github.com/neogeno/shango-lightning-wallet/issues" 15 65 |
||||
@ -0,0 +1,133 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# load raspiblitz config data |
||||
|
source /home/admin/raspiblitz.info |
||||
|
source /mnt/hdd/raspiblitz.conf |
||||
|
source /home/admin/_version.info |
||||
|
|
||||
|
clear |
||||
|
|
||||
|
# get latest release verison from GitHub |
||||
|
sudo curl -s -X GET https://raw.githubusercontent.com/rootzoll/raspiblitz/master/home.admin/_version.info > /home/admin/.version.tmp |
||||
|
gitHubVersionMain=$(cut -d"=" -f2 /home/admin/.version.tmp | cut -d'"' -f2 | cut -d"." -f1 | egrep "^[0-9]") |
||||
|
gitHubVersionSub=$(cut -d"=" -f2 /home/admin/.version.tmp | cut -d'"' -f2 | cut -d"." -f2 | egrep "^[0-9]") |
||||
|
sudo shred /home/admin/.version.tmp |
||||
|
sudo rm /home/admin/.version.tmp 2>/dev/null |
||||
|
|
||||
|
# check valid version info |
||||
|
if [ ${#gitHubVersionMain} -eq 0 ] || [ ${#gitHubVersionSub} -eq 0 ]; then |
||||
|
echo "FAIL: Was not able to get latest release Version from GitHub." |
||||
|
echo "PRESS ENTER to continue." |
||||
|
read key |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# get local version |
||||
|
localVersionMain=$(cut -d"=" -f2 /home/admin/_version.info | cut -d'"' -f2 | cut -d"." -f1 | egrep "^[0-9]") |
||||
|
localVersionSub=$(cut -d"=" -f2 /home/admin/_version.info | cut -d'"' -f2 | cut -d"." -f2 | egrep "^[0-9]") |
||||
|
|
||||
|
echo "github version: ${gitHubVersionMain}.${gitHubVersionSub}" |
||||
|
echo "local version: ${localVersionMain}.${localVersionSub}" |
||||
|
|
||||
|
# compare versions |
||||
|
newerVersionAvailable=0 |
||||
|
if [ ${gitHubVersionMain} -gt ${localVersionMain} ]; then |
||||
|
echo "Main version is higher ..." |
||||
|
newerVersionAvailable=1 |
||||
|
else |
||||
|
if [ ${gitHubVersionMain} -lt ${localVersionMain} ]; then |
||||
|
echo "Strange that GutHub main version is lower then local - you maybe using a early release." |
||||
|
elif [ ${gitHubVersionSub} -gt ${localVersionSub} ]; then |
||||
|
echo "Sub version is higher ..." |
||||
|
newerVersionAvailable=1 |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
# give feedback on version number |
||||
|
if [ ${newerVersionAvailable} -eq 0 ]; then |
||||
|
dialog --title " Update Check " --yes-button "OK" --no-button "Update Anyway" --yesno " |
||||
|
OK. You are running the newest version of RaspiBlitz. |
||||
|
" 7 57 |
||||
|
if [ $? -eq 0 ]; then |
||||
|
exit 1 |
||||
|
fi |
||||
|
clear |
||||
|
else |
||||
|
|
||||
|
whiptail --title "Update Check" --yes-button "Yes" --no-button "Not Now" --yesno " |
||||
|
There is a new Version of RaspiBlitz available. |
||||
|
You are running: ${localVersionMain}.${localVersionSub} |
||||
|
New Version: ${gitHubVersionMain}.${gitHubVersionSub} |
||||
|
|
||||
|
Do you want more Information on how to update? |
||||
|
" 12 52 |
||||
|
if [ $? -eq 1 ]; then |
||||
|
exit 1 |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
whiptail --title "Update Instructions" --yes-button "Not Now" --no-button "Start Update" --yesno "To update your RaspiBlitz to a new version: |
||||
|
|
||||
|
- Download the new SD card image to your laptop: |
||||
|
https://github.com/rootzoll/raspiblitz |
||||
|
- Flash that SD card image to a new SD card |
||||
|
- Choose 'Start Update' below. |
||||
|
|
||||
|
No need to close channels or download blockchain again. |
||||
|
|
||||
|
Do you want to start the Update now? |
||||
|
" 16 62 |
||||
|
if [ $? -eq 0 ]; then |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
whiptail --title "LND Data Backup" --yes-button "Download Backup" --no-button "Skip" --yesno " |
||||
|
Before we start the RaspiBlitz Update process, |
||||
|
its recommended to make a backup of all your LND Data |
||||
|
and download that file to your laptop. |
||||
|
|
||||
|
Do you want to download LND Data Backup now? |
||||
|
" 12 58 |
||||
|
if [ $? -eq 0 ]; then |
||||
|
clear |
||||
|
echo "*************************************" |
||||
|
echo "* PREPARING LND BACKUP DOWNLOAD" |
||||
|
echo "*************************************" |
||||
|
echo "please wait .." |
||||
|
sleep 2 |
||||
|
/home/admin/config.scripts/lnd.rescue.sh backup |
||||
|
echo |
||||
|
echo "PRESS ENTER to continue once your done downloading." |
||||
|
read key |
||||
|
else |
||||
|
clear |
||||
|
echo "*************************************" |
||||
|
echo "* JUST MAKING BACKUP TO OLD SD CARD" |
||||
|
echo "*************************************" |
||||
|
echo "please wait .." |
||||
|
sleep 2 |
||||
|
/home/admin/config.scripts/lnd.rescue.sh backup no-download |
||||
|
fi |
||||
|
|
||||
|
whiptail --title "READY TO UPDATE?" --yes-button "START UPDATE" --no-button "Cancel" --yesno "If you start the update: The RaspiBlitz will power down. |
||||
|
Once the LCD is white and no LEDs are blicking anymore: |
||||
|
|
||||
|
- Remove the Power from RaspiBlitz |
||||
|
- Exchange the old with the new SD card |
||||
|
- Connect Power back to the RaspiBlitz |
||||
|
- Follow the instructions on the LCD |
||||
|
|
||||
|
Do you have the SD card with the new version image ready |
||||
|
and do you WANT TO START UPDATE NOW? |
||||
|
" 16 62 |
||||
|
|
||||
|
if [ $? -eq 1 ]; then |
||||
|
dialog --title " Update Canceled " --msgbox " |
||||
|
OK. RaspiBlitz will NOT update now. |
||||
|
" 7 39 |
||||
|
sudo systemctl start lnd |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
clear |
||||
|
sudo shutdown now |
||||
@ -0,0 +1,4 @@ |
|||||
|
# Installs package if not yet installed |
||||
|
if [ $(sudo dpkg-query -l | grep "ii $1" | wc -l) = 0 ]; then |
||||
|
sudo apt-get install $1 -y > /dev/null |
||||
|
fi |
||||
@ -0,0 +1,37 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# Check if lnd is synced to chain and channels are open |
||||
|
# If it isn't, wait until it is |
||||
|
# exits with 1 if it isn't. |
||||
|
|
||||
|
network=$1 |
||||
|
chain=$2 |
||||
|
|
||||
|
# check if chain is in sync |
||||
|
cmdChainInSync="lncli --chain=${network} --network=${chain}net getinfo | grep '"synced_to_chain": true' -c" |
||||
|
chainInSync=${cmdChainInSync} |
||||
|
while [ $chainInSync -eq 0 ]; do |
||||
|
dialog --title "Fail: not in sync" \ |
||||
|
--ok-label "Try now" \ |
||||
|
--cancel-label "Give up" \ |
||||
|
--pause "\n\n'lncli getinfo' shows 'synced_to_chain': false\n\nTry again in a few seconds." 15 60 5 |
||||
|
|
||||
|
if [ $? -gt 0 ]; then |
||||
|
exit 1 |
||||
|
fi |
||||
|
chainInSync=${cmdChainInSync} |
||||
|
done |
||||
|
|
||||
|
# check number of connected peers |
||||
|
echo "check for open channels" |
||||
|
openChannels=$(sudo -u bitcoin /usr/local/bin/lncli --chain=${network} --network=${chain}net listchannels 2>/dev/null | grep chan_id -c) |
||||
|
if [ ${openChannels} -eq 0 ]; then |
||||
|
echo "" |
||||
|
echo "!!!!!!!!!!!!!!!!!!!" |
||||
|
echo "FAIL - You have NO ESTABLISHED CHANNELS .. open a channel first." |
||||
|
echo "!!!!!!!!!!!!!!!!!!!" |
||||
|
echo "" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
exit 0 |
||||
@ -0,0 +1,8 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# Display an image on the LCD |
||||
|
|
||||
|
# make sure fbi is installed |
||||
|
./XXaptInstall.sh fbi |
||||
|
|
||||
|
sudo fbi -a -T 1 -d /dev/fb1 --noverbose $1 2> /dev/null |
||||
@ -0,0 +1,24 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# Display a QR code for the string in qr.txt |
||||
|
|
||||
|
# make sure qrcode-encode and fbi are installed |
||||
|
#clear |
||||
|
#echo "*** Setup ***" |
||||
|
|
||||
|
echo 50 | whiptail --title "Installing" --backtitle "QR-Code" --gauge "please wait" 4 40 100 |
||||
|
./XXaptInstall.sh qrencode |
||||
|
echo 90 | whiptail --title "Installing" --backtitle "QR-Code" --gauge "please wait" 4 40 100 |
||||
|
./XXaptInstall.sh fbi |
||||
|
|
||||
|
whiptail --title "Get ready" --backtitle "QR-Code in Terminal Window" \ |
||||
|
--msgbox "Make this terminal window as large as possible - fullscreen would be best. \n\nThe QR-Code might be too large for your display. In that case, shrink the letters by pressing the keys Ctrl and Minus (or Cmd and Minus if you are on a Mac) \n\nPRESS ENTER when you are ready to see the QR-code." 20 60 |
||||
|
|
||||
|
clear |
||||
|
qrencode -t ANSI256 < /home/admin/qr.txt |
||||
|
shred /home/admin/qr.txt |
||||
|
rm -f /home/admin/qr.txt |
||||
|
echo "(To shrink QR code: macOS press CMD- / LINUX press CTRL-) Press ENTER when finished." |
||||
|
read key |
||||
|
|
||||
|
clear |
||||
@ -0,0 +1,10 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# Display a QR code for the string in qr.txt |
||||
|
|
||||
|
# make sure qrcode-encode and fbi are installed |
||||
|
./XXaptInstall.sh qrencode |
||||
|
./XXaptInstall.sh fbi |
||||
|
|
||||
|
qrencode -l L -o /home/admin/qr.png < /home/admin/qr.txt > /dev/null |
||||
|
sudo fbi -a -T 1 -d /dev/fb1 --noverbose /home/admin/qr.png 2> /dev/null |
||||
@ -0,0 +1,4 @@ |
|||||
|
#!/bin/bash |
||||
|
sudo killall -3 fbi |
||||
|
shred /home/admin/qr.png 2> /dev/null |
||||
|
rm -f /home/admin/qr.png 2> /dev/null |
||||
@ -1,2 +1,2 @@ |
|||||
# RaspiBlitz Version - always [main].[sub] |
# RaspiBlitz Version - always [main].[sub] |
||||
codeVersion="1.1" |
codeVersion="1.2" |
||||
|
After Width: | Height: | Size: 47 KiB |
File diff suppressed because one or more lines are too long
@ -0,0 +1,139 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# command info |
||||
|
if [ $# -eq 0 ] || [ "$1" = "-h" ] || [ "$1" = "-help" ]; then |
||||
|
echo "STILL EXPERIMENTAL - NOT FINISHED" |
||||
|
echo "managing additional data storage" |
||||
|
echo "blitz.datadrive.sh [on|off]" |
||||
|
echo "exits on 0 = needs reboot" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# check if sudo |
||||
|
if [ "$EUID" -ne 0 ] |
||||
|
then echo "Please run as root (with sudo)" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# update install sources |
||||
|
echo "make sure BTRFS is installed ..." |
||||
|
sudo apt-get install -y btrfs-tools |
||||
|
echo "" |
||||
|
|
||||
|
# check on/off state |
||||
|
dataStorageNotAvailableYet=$(sudo btrfs filesystem df /mnt/data 2>&1 | grep -c "ERROR: not a btrfs filesystem") |
||||
|
if [ "$1" = "1" ] || [ "$1" = "on" ]; then |
||||
|
echo "Trying to switch additional data storage on ..." |
||||
|
if [ ${dataStorageNotAvailableYet} -eq 0 ]; then |
||||
|
echo "FAIL -> data storage is already on" |
||||
|
exit 1 |
||||
|
fi |
||||
|
elif [ "$1" = "0" ] || [ "$1" = "off" ]; then |
||||
|
echo "Trying to switch additional data storage off ..." |
||||
|
if [ ${dataStorageNotAvailableYet} -eq 1 ]; then |
||||
|
echo "FAIL -> data storage is already off" |
||||
|
exit 1 |
||||
|
fi |
||||
|
else |
||||
|
echo "FAIL -> Parameter '${$1}' not known." |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
################### |
||||
|
# SWITCH ON |
||||
|
################### |
||||
|
|
||||
|
if [ "$1" = "1" ] || [ "$1" = "on" ]; then |
||||
|
|
||||
|
# detect the two usb drives |
||||
|
echo "Detecting two USB sticks/drives with same size ..." |
||||
|
lsblk -o NAME | grep "^sd" | while read -r test1 ; do |
||||
|
size1=$(lsblk -o NAME,SIZE -b | grep "^${test1}" | awk '$1=$1' | cut -d " " -f 2) |
||||
|
echo "Checking : ${test1} size(${size1})" |
||||
|
lsblk -o NAME | grep "^sd" | grep -v "${test1}" | while read -r test2 ; do |
||||
|
size2=$(lsblk -o NAME,SIZE -b | grep "^${test2}" | awk '$1=$1' | cut -d " " -f 2) |
||||
|
if [ "${size1}" = "${size2}" ]; then |
||||
|
echo " MATCHING ${test2} size(${size2})" |
||||
|
echo "${test1}" > .dev1.tmp |
||||
|
echo "${test2}" > .dev2.tmp |
||||
|
else |
||||
|
echo " different ${test2} size(${size2})" |
||||
|
fi |
||||
|
done |
||||
|
done |
||||
|
dev1=$(cat .dev1.tmp) |
||||
|
dev2=$(cat .dev2.tmp) |
||||
|
rm -f .dev1.tmp |
||||
|
rm -f .dev2.tmp |
||||
|
echo "RESULTS:" |
||||
|
echo "dev1(${dev1})" |
||||
|
echo "dev2(${dev2})" |
||||
|
echo "" |
||||
|
|
||||
|
# check that results are available |
||||
|
if [ ${#dev1} -eq 0 ] || [ ${#dev2} -eq 0 ]; then |
||||
|
echo "!! FAIL -> was not able to detect two devices with the same size" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# check size (at least 4GB minus some tolerance) |
||||
|
size=$(lsblk -o NAME,SIZE -b | grep "^${dev1}" | awk '$1=$1' | cut -d " " -f 2) |
||||
|
if [ ${size} -lt 3500000000 ]; then |
||||
|
echo "!! FAIL -> too small - additional storage needs to be bigger than 4GB" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# check if devices are containing old data |
||||
|
echo "Analysing Drives ..." |
||||
|
nameDev1=$(lsblk -o NAME,LABEL | grep "^${dev1}" | awk '$1=$1' | cut -d " " -f 2) |
||||
|
nameDev2=$(lsblk -o NAME,LABEL | grep "^${dev2}" | awk '$1=$1' | cut -d " " -f 2) |
||||
|
if [ "${nameDev1}" = "DATASTORE" ] || [ "${nameDev2}" = "DATASTORE" ]; then |
||||
|
# TODO: once implemented -> also make sure that dev1 is named "DATASTORE" and if 2nd is other -> format and add as raid |
||||
|
echo "!! NOT IMPLEMENTED YET -> devices seem contain old data, because name is 'DATASTORE'" |
||||
|
echo "if you dont care about that data: format devices devices on other computer with FAT(32) named TEST" |
||||
|
exit 1 |
||||
|
fi |
||||
|
echo "OK drives dont contain old data." |
||||
|
echo "" |
||||
|
|
||||
|
# format first drive |
||||
|
echo "Formatting /dev/${dev1} with BTRFS ..." |
||||
|
sudo mkfs.btrfs -L DATASTORE -f /dev/${dev1} |
||||
|
echo "OK" |
||||
|
echo "" |
||||
|
|
||||
|
# mount the BTRFS drive |
||||
|
echo "Mounting under /mnt/data ..." |
||||
|
sudo mkdir -p /mnt/data |
||||
|
sudo mount /dev/${dev1} /mnt/data |
||||
|
echo "OK" |
||||
|
echo "" |
||||
|
|
||||
|
# adding the second device |
||||
|
echo "Adding the second device as RAID1 .." |
||||
|
sudo btrfs device add -f /dev/${dev2} /mnt/data |
||||
|
sudo btrfs filesystem balance start -dconvert=raid1 -mconvert=raid1 /mnt/data |
||||
|
echo "" |
||||
|
exit 0 |
||||
|
|
||||
|
# adding the second device |
||||
|
uuid=$(sudo btrfs filesystem show /mnt/data | grep "uuid:" | awk '$1=$1' | cut -d " " -f 4) |
||||
|
|
||||
|
fi |
||||
|
|
||||
|
################### |
||||
|
# SWITCH OFF |
||||
|
################### |
||||
|
|
||||
|
if [ "$1" = "0" ] || [ "$1" = "off" ]; then |
||||
|
|
||||
|
echo "TODO -> Turn off" |
||||
|
|
||||
|
sudo btrfs filesystem show /mnt/data |
||||
|
sudo btrfs filesystem df /mnt/data |
||||
|
|
||||
|
sudo umount /mnt/data |
||||
|
|
||||
|
exit 0 |
||||
|
|
||||
|
fi |
||||
@ -0,0 +1,246 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
source /home/admin/raspiblitz.info |
||||
|
source /mnt/hdd/raspiblitz.conf |
||||
|
|
||||
|
# command info |
||||
|
if [ "$1" = "-h" ] || [ "$1" = "-help" ]; then |
||||
|
echo "# script to scan the state of the system after setup" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# measure time of scan |
||||
|
startTime=$(date +%s) |
||||
|
|
||||
|
# macke sure temp folder on HDD is available and fro all usable |
||||
|
sudo mkdir /mnt/hdd/temp 2>/dev/null |
||||
|
sudo chmod 777 -R /mnt/hdd/temp 2>/dev/null |
||||
|
|
||||
|
# localIP |
||||
|
localip=$(ip addr | grep 'state UP' -A2 | tail -n1 | awk '{print $2}' | cut -f1 -d'/') |
||||
|
echo "localIP='${localip}'" |
||||
|
|
||||
|
# temp |
||||
|
tempC=$(echo "scale=1; $(cat /sys/class/thermal/thermal_zone0/temp)/1000" | bc) |
||||
|
echo "tempCelsius='${tempC}'" |
||||
|
|
||||
|
# uptime in seconds |
||||
|
uptime=$(awk '{printf("%d\n",$1 + 0.5)}' /proc/uptime) |
||||
|
echo "uptime=${uptime}" |
||||
|
|
||||
|
# count restarts of bitcoind/litecoind |
||||
|
startcountBlockchain=$(cat /home/admin/systemd.blockchain.log 2>/dev/null | grep -c "STARTED") |
||||
|
echo "startcountBlockchain=${startcountBlockchain}" |
||||
|
|
||||
|
# is bitcoind running |
||||
|
bitcoinRunning=$(systemctl status ${network}d.service 2>/dev/null | grep -c running) |
||||
|
echo "bitcoinActive=${bitcoinRunning}" |
||||
|
|
||||
|
if [ ${bitcoinRunning} -eq 1 ]; then |
||||
|
|
||||
|
# get blockchain info |
||||
|
sudo -u bitcoin ${network}-cli -datadir=/home/bitcoin/.${network} getblockchaininfo 1>/mnt/hdd/temp/.bitcoind.out 2>/mnt/hdd/temp/.bitcoind.error |
||||
|
# check if error on request |
||||
|
blockchaininfo=$(cat /mnt/hdd/temp/.bitcoind.out 2>/dev/null) |
||||
|
bitcoinError=$(cat /mnt/hdd/temp/.bitcoind.error 2>/dev/null) |
||||
|
#rm /mnt/hdd/temp/.bitcoind.error 2>/dev/null |
||||
|
if [ ${#bitcoinError} -gt 0 ]; then |
||||
|
bitcoinErrorShort=$(echo ${bitcoinError/error*:/} | sed 's/[^a-zA-Z0-9 ]//g') |
||||
|
echo "bitcoinErrorShort='${bitcoinErrorShort}'" |
||||
|
bitcoinErrorFull=$(echo ${bitcoinError} | tr -d "'") |
||||
|
echo "bitcoinErrorFull='${bitcoinErrorFull}'" |
||||
|
else |
||||
|
|
||||
|
############################## |
||||
|
# Get data from blockchaininfo |
||||
|
############################## |
||||
|
|
||||
|
# get total number of blocks |
||||
|
total=$(echo ${blockchaininfo} | jq -r '.blocks') |
||||
|
echo "blockchainHeight=${total}" |
||||
|
|
||||
|
# is initial sync of blockchain |
||||
|
initialSync=$(echo ${blockchaininfo} | jq -r '.initialblockdownload' | grep -c 'true') |
||||
|
echo "initialSync=${initialSync}" |
||||
|
|
||||
|
# get blockchain sync progress |
||||
|
syncProgress="$(echo ${blockchaininfo} | jq -r '.verificationprogress')" |
||||
|
syncProgress=$(echo $syncProgress | awk '{printf( "%.2f%%", 100 * $1)}' | tr '%' ' ' | tr -s " ") |
||||
|
echo "syncProgress=${syncProgress}" |
||||
|
|
||||
|
fi |
||||
|
else |
||||
|
|
||||
|
# find out why Bitcoin not running |
||||
|
|
||||
|
pathAdd="" |
||||
|
if [ "${chain}" = "test" ]; then |
||||
|
pathAdd="/testnet3" |
||||
|
fi |
||||
|
|
||||
|
#### POSSIBLE/SOFT PROBLEMS |
||||
|
# place here in future analysis |
||||
|
|
||||
|
#### HARD PROBLEMS |
||||
|
|
||||
|
# LOW DISK SPACE |
||||
|
lowDiskSpace=$(sudo tail -n 100 /mnt/hdd/${network}${pathAdd}/debug.log 2>/dev/null | grep -c "Error: Disk space is low!") |
||||
|
if [ ${lowDiskSpace} -gt 0 ]; then |
||||
|
bitcoinErrorShort="HDD DISK SPACE LOW" |
||||
|
bitcoinErrorFull="HDD DISK SPACE LOW - check what data you can delete on HDD and restart" |
||||
|
fi |
||||
|
|
||||
|
#### GENERIC ERROR FIND |
||||
|
|
||||
|
# if still no error identified - search logs for generic error (after 4min uptime) |
||||
|
if [ ${#bitcoinErrorShort} -eq 0 ] && [ ${uptime} -gt 240 ]; then |
||||
|
bitcoinErrorFull=$(sudo tail -n 100 /mnt/hdd/${network}${pathAdd}/debug.log 2>/dev/null | grep -c "Error:" | tail -1 | tr -d "'") |
||||
|
if [ ${#bitcoinErrorFull} -gt 0 ]; then |
||||
|
bitcoinErrorShort="Error found in Logs" |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
# output error if found |
||||
|
if [ ${#bitcoinErrorShort} -gt 0 ]; then |
||||
|
echo "bitcoinErrorShort='${bitcoinErrorShort}'" |
||||
|
echo "bitcoinErrorFull='${bitcoinErrorFull}'" |
||||
|
/home/admin/config.scripts/blitz.systemd.sh log blockchain "ERROR: ${bitcoinErrorShort}" |
||||
|
fi |
||||
|
|
||||
|
fi |
||||
|
|
||||
|
# count restarts of bitcoind/litecoind |
||||
|
startcountLightning=$(cat /home/admin/systemd.lightning.log 2>/dev/null | grep -c "STARTED") |
||||
|
echo "startcountLightning=${startcountLightning}" |
||||
|
|
||||
|
# is LND running |
||||
|
lndRunning=$(systemctl status lnd.service 2>/dev/null | grep -c running) |
||||
|
echo "lndActive=${lndRunning}" |
||||
|
|
||||
|
if [ ${lndRunning} -eq 1 ]; then |
||||
|
|
||||
|
# get LND info |
||||
|
lndRPCReady=1 |
||||
|
lndinfo=$(sudo -u bitcoin lncli getinfo 2>/mnt/hdd/temp/.lnd.error) |
||||
|
|
||||
|
# check if error on request |
||||
|
lndErrorFull=$(cat /mnt/hdd/temp/.lnd.error 2>/dev/null) |
||||
|
lndErrorShort='' |
||||
|
#rm /mnt/hdd/temp/.lnd.error 2>/dev/null |
||||
|
|
||||
|
if [ ${#lndErrorFull} -gt 0 ]; then |
||||
|
|
||||
|
# flag if error could be resoled by analysis |
||||
|
errorResolved=0 |
||||
|
|
||||
|
### analyse LND logs since start |
||||
|
|
||||
|
# find a the line number in logs of start of LND |
||||
|
# just do this on error case to save on processing memory |
||||
|
lndStartLineNumber=$(sudo cat /mnt/hdd/lnd/logs/${network}/${chain}net/lnd.log 2>/dev/null | grep -in "LTND: Active chain:" | tail -1 | cut -d ":" -f1) |
||||
|
|
||||
|
# get logs of last LND start |
||||
|
lndLogsAfterStart=$(sudo tail --lines=+${lndStartLineNumber} /mnt/hdd/lnd/logs/${network}/${chain}net/lnd.log 2>/dev/null) |
||||
|
|
||||
|
# check RPC server ready (can take some time after wallet was unlocked) |
||||
|
lndRPCReady=$(echo "${lndLogsAfterStart}" | grep -c "RPCS: RPC server listening on") |
||||
|
echo "lndRPCReady=${lndRPCReady}" |
||||
|
|
||||
|
# check wallet if wallet was opened (after correct password) |
||||
|
lndWalletOpened=$(echo "${lndLogsAfterStart}" | grep -c "LNWL: Opened wallet") |
||||
|
echo "walletOpened=${lndWalletOpened}" |
||||
|
|
||||
|
# check wallet if wallet is ready (can take some time after wallet was opened) |
||||
|
lndWalletReady=$(echo "${lndLogsAfterStart}" | grep -c "LTND: LightningWallet opened") |
||||
|
echo "walletReady=${lndWalletReady}" |
||||
|
|
||||
|
### check errors |
||||
|
|
||||
|
# scan error for walletLocked as common error |
||||
|
locked=$(echo ${lndErrorFull} | grep -c 'Wallet is encrypted') |
||||
|
if [ ${locked} -gt 0 ]; then |
||||
|
echo "walletLocked=1" |
||||
|
else |
||||
|
echo "walletLocked=0" |
||||
|
|
||||
|
rpcNotWorking=$(echo ${lndErrorFull} | grep -c 'connection refused') |
||||
|
if [ ${rpcNotWorking} -gt 0 ]; then |
||||
|
|
||||
|
# this can happen for a long time when LND is starting fresh sync |
||||
|
# on first startup - check if logs since start signaled RPC ready before |
||||
|
if [ ${lndRPCReady} -eq 0 ]; then |
||||
|
# nullify error - this is normal |
||||
|
lndErrorFull="" |
||||
|
errorResolved=1 |
||||
|
# oputput basic data because no error |
||||
|
echo "# LND RPC is still warming up - no scan progress: prepare scan" |
||||
|
echo "scanTimestamp=-2" |
||||
|
echo "syncedToChain=0" |
||||
|
else |
||||
|
echo "# LND RPC was started - some other problem going on" |
||||
|
lndErrorShort='LND RPC not responding' |
||||
|
lndErrorFull=$(echo "LND RPC is not responding. LND may have problems starting up. Check logs, config files and systemd service. Org-Error: ${lndErrorFull}" | tr -d "'") |
||||
|
fi |
||||
|
fi |
||||
|
|
||||
|
# if not known error and not resolved before - keep generic |
||||
|
if [ ${#lndErrorShort} -eq 0 ] && [ ${errorResolved} -eq 0 ]; then |
||||
|
lndErrorShort='Unkown Error - see logs' |
||||
|
lndErrorFull=$(echo ${lndErrorFull} | tr -d "'") |
||||
|
fi |
||||
|
|
||||
|
# write to results |
||||
|
if [ ${#lndErrorFull} -gt 0 ]; then |
||||
|
echo "lndErrorShort='${lndErrorShort}'" |
||||
|
echo "lndErrorFull='${lndErrorFull}'" |
||||
|
/home/admin/config.scripts/blitz.systemd.sh log lightning "ERROR: ${lndErrorFull}" |
||||
|
fi |
||||
|
|
||||
|
fi |
||||
|
|
||||
|
else |
||||
|
|
||||
|
# check if wallet is locked |
||||
|
locked=$(echo ${lndinfo} | grep -c unlock) |
||||
|
if [ ${locked} -gt 0 ]; then |
||||
|
echo "walletLocked=1" |
||||
|
else |
||||
|
echo "walletLocked=0" |
||||
|
fi |
||||
|
|
||||
|
# synced to chain |
||||
|
syncedToChain=$(echo ${lndinfo} | jq -r '.synced_to_chain' | grep -c 'true') |
||||
|
echo "syncedToChain=${syncedToChain}" |
||||
|
|
||||
|
# lnd scan progress |
||||
|
scanTimestamp=$(echo ${lndinfo} | jq -r '.best_header_timestamp') |
||||
|
if [ ${#scanTimestamp} -gt 0 ]; then |
||||
|
echo "scanTimestamp=${scanTimestamp}" |
||||
|
scanDate=$(date -d @${scanTimestamp}) |
||||
|
echo "scanDate='${scanDate}'" |
||||
|
|
||||
|
# calculate LND scan progress by seconds since Genesisblock |
||||
|
genesisTimestamp=1230940800 |
||||
|
nowTimestamp=$(date +%s) |
||||
|
totalSeconds=$(echo "${nowTimestamp}-${genesisTimestamp}" | bc) |
||||
|
scannedSeconds=$(echo "${scanTimestamp}-${genesisTimestamp}" | bc) |
||||
|
scanProgress=$(echo "scale=2; $scannedSeconds*100/$totalSeconds" | bc) |
||||
|
echo "scanProgress=${scanProgress}" |
||||
|
else |
||||
|
echo "# was not able to parse 'best_header_timestamp' from: lncli getinfo" |
||||
|
echo "scanTimestamp=-1" |
||||
|
fi |
||||
|
|
||||
|
fi |
||||
|
|
||||
|
# output if lnd-RPC is ready |
||||
|
echo "lndRPCReady=${lndRPCReady}" |
||||
|
|
||||
|
fi |
||||
|
|
||||
|
# check if online if problem with other stuff |
||||
|
|
||||
|
# info on scan run time |
||||
|
endTime=$(date +%s) |
||||
|
runTime=$(echo "${endTime}-${startTime}" | bc) |
||||
|
echo "scriptRuntime=${runTime}" |
||||
@ -0,0 +1,104 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# command info |
||||
|
if [ "$1" = "-h" ] || [ "$1" = "-help" ]; then |
||||
|
echo "run stress test to measure heat and voltage" |
||||
|
echo "blitz.stresstest.sh [?filenameForReport]" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# Based on https://github.com/bamarni/pi64/issues/4#issuecomment-292707581 |
||||
|
# sysbench manual: http://imysql.com/wp-content/uploads/2014/10/sysbench-manual.pdf |
||||
|
|
||||
|
# get parameter |
||||
|
filenameForReport=$1 |
||||
|
|
||||
|
# check if bechmarking tool is installed |
||||
|
sysbenchInstalled=$(sysbench --version 2>/dev/null | grep -c 'sysbench 0.') |
||||
|
if [ ${sysbenchInstalled} -eq 0 ];then |
||||
|
sudo apt install -y sysbench |
||||
|
fi |
||||
|
|
||||
|
# do debug outputs to the STDERR - so that the STDOUT is just the results in the end |
||||
|
echo "RaspiBlitz Hardwaretest v0.1" >&2 |
||||
|
echo "Starting sysbench to run for 60 seconds (--max-time=60 --cpu-max-prime=10000)" >&2 |
||||
|
|
||||
|
# result values |
||||
|
powerWARN=0 |
||||
|
powerFAIL=0 |
||||
|
powerMIN=9999999 |
||||
|
tempWARN=0 |
||||
|
tempFAIL=0 |
||||
|
tempMAX=0 |
||||
|
|
||||
|
# starting bench mark |
||||
|
sysbench --max-time=60 --test=cpu --cpu-max-prime=10000 --num-threads=4 run 1>/dev/null 2>&1 & |
||||
|
|
||||
|
# keep monitoring in the background |
||||
|
Maxfreq=$(( $(awk '{printf ("%0.0f",$1/1000); }' </sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq) -15 )) |
||||
|
for (( n=0; n<15; ++n )); do |
||||
|
|
||||
|
# make measurements |
||||
|
Temp=$(sudo vcgencmd measure_temp | cut -f2 -d=) |
||||
|
RealClockspeed=$(sudo vcgencmd measure_clock arm | awk -F"=" '{printf ("%0.0f",$2/1000000); }' ) |
||||
|
SysFSClockspeed=$(awk '{printf ("%0.0f",$1/1000); }' </sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq) |
||||
|
CoreVoltage=$(sudo vcgencmd measure_volts | cut -f2 -d= | sed 's/000//') |
||||
|
|
||||
|
# debug output |
||||
|
if [ ${RealClockspeed} -ge ${Maxfreq} ]; then |
||||
|
echo "${Temp}$(printf "%5s" ${SysFSClockspeed}) MHz ${CoreVoltage}" >&2 |
||||
|
else |
||||
|
echo "${Temp}$(printf "%5s" ${RealClockspeed})/$(printf "%4s" ${SysFSClockspeed}) MHz ${CoreVoltage}" >&2 |
||||
|
fi |
||||
|
|
||||
|
# analyse Voltage |
||||
|
voltFloat=$(echo "${CoreVoltage/V/}*1000000" | bc) |
||||
|
voltInt=${voltFloat/.*} |
||||
|
#echo "V -> ${voltFloat}/${voltInt}" |
||||
|
if [ ${voltInt} -lt 1200100 ] && [ ${powerWARN} -gt 1 ]; then |
||||
|
((powerFAIL=powerFAIL+1)) |
||||
|
echo "--> Power CRITICAL detected" >&2 |
||||
|
fi |
||||
|
if [ ${voltInt} -lt 1250000 ]; then |
||||
|
((powerWARN=powerWARN+1)) |
||||
|
echo "--> Power WARN detected" >&2 |
||||
|
fi |
||||
|
if [ ${voltInt} -lt ${powerMIN} ]; then |
||||
|
powerMIN=${voltInt} |
||||
|
fi |
||||
|
|
||||
|
# analyse Temp |
||||
|
tempFloat=$(echo "${Temp/\'C/}*100" | bc) |
||||
|
tempInt=${tempFloat/.*} |
||||
|
#echo "T -> ${tempFloat}/${tempInt}" |
||||
|
if [ ${tempInt} -gt 6999 ]; then |
||||
|
((tempFAIL=tempFAIL+1)) |
||||
|
echo "--> Temp CRITICAL detected" >&2 |
||||
|
fi |
||||
|
if [ ${tempInt} -gt 6500 ]; then |
||||
|
((tempWARN=tempWARN+1)) |
||||
|
echo "--> Temp WARN detected" >&2 |
||||
|
fi |
||||
|
if [ ${tempInt} -gt ${tempMAX} ]; then |
||||
|
tempMAX=${tempInt} |
||||
|
fi |
||||
|
|
||||
|
sleep 5 |
||||
|
done |
||||
|
|
||||
|
if [ ${#filenameForReport} -eq 0 ]; then |
||||
|
echo "powerFAIL=${powerFAIL}" |
||||
|
echo "powerWARN=${powerWARN}" |
||||
|
echo "powerMIN='${powerMIN} microVolt'" |
||||
|
echo "tempFAIL=${tempFAIL}" |
||||
|
echo "tempWARN=${tempWARN}" |
||||
|
echo "tempMAX='${tempMAX} centiGrad'" |
||||
|
else |
||||
|
echo "powerFAIL=${powerFAIL}" >${filenameForReport} |
||||
|
echo "powerWARN=${powerWARN}" >>${filenameForReport} |
||||
|
echo "powerMIN='${powerMIN} microVolt'" >>${filenameForReport} |
||||
|
echo "tempFAIL=${tempFAIL}" >>${filenameForReport} |
||||
|
echo "tempWARN=${tempWARN}" >>${filenameForReport} |
||||
|
echo "tempMAX='${tempMAX} centiGrad'" >>${filenameForReport} |
||||
|
sudo chmod 744 ${filenameForReport} |
||||
|
fi |
||||
@ -0,0 +1,19 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# command info |
||||
|
if [ "$1" = "-h" ] || [ "$1" = "-help" ]; then |
||||
|
echo "additional systemd services" |
||||
|
echo "blitz.systemd.sh log blockchain STARTED" |
||||
|
echo "blitz.systemd.sh log loghtning STARTED" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# check parameter |
||||
|
if [ "${1}" != "log" ]; then |
||||
|
echo "# FAIL: unkown parameter" |
||||
|
fi |
||||
|
|
||||
|
# writing log file entry |
||||
|
logFile="/home/admin/systemd.${2}.log" |
||||
|
echo "$(date +%s) ${3}" >> ${logFile} |
||||
|
echo "# OK: log '${3}' written to ${logFile}" |
||||
@ -0,0 +1,99 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# command info |
||||
|
if [ $# -eq 0 ] || [ "$1" = "-h" ] || [ "$1" = "-help" ]; then |
||||
|
echo "# script to upload a file to DropBox (without third party libs)" |
||||
|
echo "# dropbox.upload.sh upload [AUTHTOKEN] [FILEPATH]" |
||||
|
echo "# dropbox.upload.sh check [AUTHTOKEN]" |
||||
|
echo "# for Dropbox Setup with Authtoken, see:" |
||||
|
echo "# https://gist.github.com/vindard/e0cd3d41bb403a823f3b5002488e3f90" |
||||
|
echo "err='just informational output'" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# get first parameter |
||||
|
MODE="$1" |
||||
|
if [ "${MODE}" == "check" ]; then |
||||
|
|
||||
|
# get needed second parameter |
||||
|
DROPBOX_APITOKEN="$2" |
||||
|
if [ ${#DROPBOX_APITOKEN} -eq 0 ]; then |
||||
|
echo "err='missing Parameter AUTHTOKEN'" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# run API check |
||||
|
curl -s -X POST https://api.dropboxapi.com/2/users/get_current_account \ |
||||
|
--header "Authorization: Bearer "$DROPBOX_APITOKEN | grep rror |
||||
|
if [[ ! $? -eq 0 ]] ; then |
||||
|
echo "# Dropbox API Token worked" |
||||
|
echo "check=1" |
||||
|
else |
||||
|
echo "# Invalid Dropbox API Token!" |
||||
|
echo "check=0" |
||||
|
fi |
||||
|
|
||||
|
elif [ "${MODE}" == "upload" ]; then |
||||
|
|
||||
|
# get needed second parameter |
||||
|
DROPBOX_APITOKEN="$2" |
||||
|
if [ ${#DROPBOX_APITOKEN} -eq 0 ]; then |
||||
|
echo "err='missing Parameter AUTHTOKEN'" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# get needed third parameter |
||||
|
SOURCEFILE="$3" |
||||
|
if [ ${#SOURCEFILE} -eq 0 ]; then |
||||
|
echo "err='missing Parameter SOURCEFILE'" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
source /mnt/hdd/raspiblitz.conf |
||||
|
if [ ${#hostname} -eq 0 ]; then |
||||
|
hostname="raspiblitz" |
||||
|
fi |
||||
|
|
||||
|
DEVICE=$(echo "${hostname}" | awk '{print tolower($0)}' | sed -e 's/ /-/g') |
||||
|
BACKUPFOLDER=lndbackup-$DEVICE |
||||
|
FILENAME=$(basename "${SOURCEFILE}") |
||||
|
|
||||
|
sudo curl -s -X POST https://content.dropboxapi.com/2/files/upload \ |
||||
|
--header "Authorization: Bearer "${DROPBOX_APITOKEN}"" \ |
||||
|
--header "Dropbox-API-Arg: {\"path\": \"/"$BACKUPFOLDER"/"$FILENAME"\",\"mode\": \"overwrite\",\"autorename\": true,\"mute\": false,\"strict_conflict\": false}" \ |
||||
|
--header "Content-Type: application/octet-stream" \ |
||||
|
--data-binary @$SOURCEFILE > /home/admin/.dropbox.tmp |
||||
|
safeResponse=$(sed 's/[^a-zA-Z0-9 ]//g' /home/admin/.dropbox.tmp) |
||||
|
sudo shred /home/admin/.dropbox.tmp |
||||
|
sudo rm /home/admin/.dropbox.tmp 2>/dev/null |
||||
|
|
||||
|
success=$(echo "${safeResponse}" | grep -c 'servermodified') |
||||
|
sizeZero=$(echo "${safeResponse}" | grep -c 'size 0') |
||||
|
if [ ${sizeZero} -gt 0 ]; then |
||||
|
echo "# Upload happened but is size zero" |
||||
|
echo "upload=0" |
||||
|
echo "err='size zero'" |
||||
|
echo "errMore='${safeResponse}'" |
||||
|
elif [ ${success} -gt 0 ] ; then |
||||
|
echo "# Successfully uploaded!" |
||||
|
echo "upload=1" |
||||
|
else |
||||
|
echo "# Unknown Error" |
||||
|
echo "upload=0" |
||||
|
echo "err='unknown'" |
||||
|
echo "errMore='${safeResponse}'" |
||||
|
fi |
||||
|
|
||||
|
else |
||||
|
echo "err='unkown mode'" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
@ -0,0 +1,43 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# command info |
||||
|
if [ $# -eq 0 ] || [ "$1" = "-h" ] || [ "$1" = "-help" ]; then |
||||
|
echo "config script to set a the DNS server that should be used" |
||||
|
echo "internet.dns.sh [DNS-SERVER]" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# 1. parameter |
||||
|
DNSSERVER="$1" |
||||
|
echo "The DNS server you want to set is: ${DNSSERVER}" |
||||
|
|
||||
|
# checking for IP address |
||||
|
if [[ $DNSSERVER =~ ^(([0-9a-fA-F]{1,4}:){7,7}[0-9a-fA-F]{1,4}|([0-9a-fA-F]{1,4}:){1,7}:|([0-9a-fA-F]{1,4}:){1,6}:[0-9a-fA-F]{1,4}|([0-9a-fA-F]{1,4}:){1,5}(:[0-9a-fA-F]{1,4}){1,2}|([0-9a-fA-F]{1,4}:){1,4}(:[0-9a-fA-F]{1,4}){1,3}|([0-9a-fA-F]{1,4}:){1,3}(:[0-9a-fA-F]{1,4}){1,4}|([0-9a-fA-F]{1,4}:){1,2}(:[0-9a-fA-F]{1,4}){1,5}|[0-9a-fA-F]{1,4}:((:[0-9a-fA-F]{1,4}){1,6})|:((:[0-9a-fA-F]{1,4}){1,7}|:)|fe80:(:[0-9a-fA-F]{0,4}){0,4}%[0-9a-zA-Z]{1,}|::(ffff(:0{1,4}){0,1}:){0,1}((25[0-5]|(2[0-4]|1{0,1}[0-9]){0,1}[0-9])\.){3,3}(25[0-5]|(2[0-4]|1{0,1}[0-9]){0,1}[0-9])|([0-9a-fA-F]{1,4}:){1,4}:((25[0-5]|(2[0-4]|1{0,1}[0-9]){0,1}[0-9])\.){3,3}(25[0-5]|(2[0-4]|1{0,1}[0-9]){0,1}[0-9]))$ ]]; then |
||||
|
echo "OK IPv6" |
||||
|
elif [[ $DNSSERVER =~ ^([0-9]{1,2}|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.([0-9]{1,2}|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.([0-9]{1,2}|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.([0-9]{1,2}|1[0-9][0-9]|2[0-4][0-9]|25[0-5])$ ]]; then |
||||
|
echo "OK IPv4" |
||||
|
else |
||||
|
echo "FAIL - not an IPv4 or IPv6 address" |
||||
|
exit 1 |
||||
|
fi |
||||
|
echo "" |
||||
|
|
||||
|
# setting DNS address |
||||
|
echo "Setting DNS server in /etc/dhcpcd.conf ..." |
||||
|
sudo sed -i "s/^static domain_name_servers=.*/static domain_name_servers=${DNSSERVER}/g" /etc/dhcpcd.conf |
||||
|
echo "OK" |
||||
|
echo "" |
||||
|
|
||||
|
# make sure entry in raspiblitz.conf exists |
||||
|
source /mnt/hdd/raspiblitz.conf |
||||
|
if [ ${#dnsServer} -eq 0 ]; then |
||||
|
echo "Adding value to /mnt/hdd/raspiblitz.conf" |
||||
|
echo "dnsServer=${DNSSERVER}" >> /mnt/hdd/raspiblitz.conf |
||||
|
else |
||||
|
echo "Updating value in /mnt/hdd/raspiblitz.conf" |
||||
|
sudo sed -i "s/^dnsServer=.*/dnsServer=${DNSSERVER}/g" /mnt/hdd/raspiblitz.conf |
||||
|
fi |
||||
|
echo "OK" |
||||
|
echo "" |
||||
|
|
||||
|
echo "DNS Server is set - reboot needed before active" |
||||
@ -0,0 +1,43 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# command info |
||||
|
if [ $# -eq 0 ] || [ "$1" = "-h" ] || [ "$1" = "-help" ]; then |
||||
|
echo "# config script to init/show/transfer ssh pub keys." |
||||
|
echo "# -> return pubkey (and will init if needed):" |
||||
|
echo "# internet.sshpubkey.sh get" |
||||
|
echo "# -> transfer ssh-pub to a authorizedkey of remote server:" |
||||
|
echo "# internet.sshpubkey.sh transfer [REMOTEUSER]@[REMOTESERVER]" |
||||
|
echo "err='just informational output'" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# 1. parameter MODE |
||||
|
MODE="$1" |
||||
|
|
||||
|
# root as default user |
||||
|
# its used for all ssh tunnel/back action |
||||
|
|
||||
|
# make sure the ssh keys for that user are initialized |
||||
|
sshKeysExist=$(sudo ls /root/.ssh/id_rsa.pub | grep -c 'id_rsa.pub') |
||||
|
if [ ${sshKeysExist} -eq 0 ]; then |
||||
|
echo "# generation SSH keys for user root" |
||||
|
sudo mkdir /root/.ssh 2>/dev/null |
||||
|
sudo sh -c 'yes y | sudo ssh-keygen -b 2048 -t rsa -f /root/.ssh/id_rsa -q -N ""' |
||||
|
fi |
||||
|
|
||||
|
if [ "${MODE}" == "get" ]; then |
||||
|
|
||||
|
# get ssh pub key and print |
||||
|
sshPubKey=$(sudo cat /root/.ssh/id_rsa.pub) |
||||
|
echo "user='root'" |
||||
|
echo "sshPubKey='${sshPubKey}'" |
||||
|
|
||||
|
elif [ "${MODE}" == "transfer" ]; then |
||||
|
|
||||
|
sudo ssh-copy-id $2 |
||||
|
|
||||
|
else |
||||
|
echo "err='paremeter not known - run with -help'" |
||||
|
fi |
||||
|
|
||||
|
|
||||
@ -0,0 +1,245 @@ |
|||||
|
#!/usr/bin/python3 |
||||
|
|
||||
|
import sys, subprocess, re |
||||
|
from pathlib import Path |
||||
|
|
||||
|
# IDEA: At the momemt its just Reverse-SSh Tunnels thats why [INTERNAL-PORT]<[EXTERNAL-PORT] |
||||
|
# For the future also just local ssh tunnels could be added with [INTERNAL-PORT]-[EXTERNAL-PORT] |
||||
|
# for the use case when a server wants to use a RaspiBlitz behind a NAT as Lightning backend |
||||
|
|
||||
|
# display config script info |
||||
|
if len(sys.argv) <= 1 or sys.argv[1] == "-h" or sys.argv[1] == "help": |
||||
|
print("forward ports from another server to raspiblitz with reverse SSH tunnel") |
||||
|
print("internet.sshtunnel.py [on|off|restore] [USER]@[SERVER] \"[INTERNAL-PORT]<[EXTERNAL-PORT]\"") |
||||
|
print("note that [INTERNAL-PORT]<[EXTERNAL-PORT] can one or multiple forwardings") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
# |
||||
|
# CONSTANTS |
||||
|
# sudo journalctl -f -u autossh-tunnel |
||||
|
# |
||||
|
|
||||
|
SERVICENAME="autossh-tunnel.service" |
||||
|
SERVICEFILE="/etc/systemd/system/"+SERVICENAME |
||||
|
SERVICETEMPLATE="""# see config script internet.sshtunnel.py |
||||
|
[Unit] |
||||
|
Description=AutoSSH tunnel service |
||||
|
After=network.target |
||||
|
|
||||
|
[Service] |
||||
|
User=root |
||||
|
Group=root |
||||
|
Environment="AUTOSSH_GATETIME=0" |
||||
|
ExecStart=/usr/bin/autossh -M 0 -N -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o "ServerAliveInterval 30" -o "ServerAliveCountMax 3" [PLACEHOLDER] |
||||
|
StandardOutput=journal |
||||
|
|
||||
|
[Install] |
||||
|
WantedBy=multi-user.target |
||||
|
""" |
||||
|
|
||||
|
# get LND port form lnd.conf |
||||
|
LNDPORT = subprocess.getoutput("sudo cat /mnt/hdd/lnd/lnd.conf | grep '^listen=*' | cut -f2 -d':'") |
||||
|
if len(LNDPORT) == 0: |
||||
|
LNDPORT="9735" |
||||
|
|
||||
|
|
||||
|
|
||||
|
# |
||||
|
# RESTORE = SWITCHING ON with restore flag on |
||||
|
# on restore other external scripts dont need calling |
||||
|
# |
||||
|
|
||||
|
forwardingLND = False |
||||
|
restoringOnUpdate = False |
||||
|
if sys.argv[1] == "restore": |
||||
|
print("internet.sshtunnel.py -> running with restore flag") |
||||
|
sys.argv[1] = "on" |
||||
|
restoringOnUpdate = True |
||||
|
|
||||
|
# |
||||
|
# SWITCHING ON |
||||
|
# |
||||
|
|
||||
|
if sys.argv[1] == "on": |
||||
|
|
||||
|
# check if already running |
||||
|
isRunning = subprocess.getoutput("sudo systemctl --no-pager | grep -c '%s'" % (SERVICENAME)) |
||||
|
if int(isRunning) > 0: |
||||
|
print("SSH TUNNEL SERVICE IS RUNNING - run 'internet.sshtunnel.py off' first to set new tunnel") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
# check server address |
||||
|
if len(sys.argv) < 3: |
||||
|
print("[USER]@[SERVER] missing - use 'internet.sshtunnel.py -h' for help") |
||||
|
sys.exit(1) |
||||
|
if sys.argv[2].count("@") != 1: |
||||
|
print("[USER]@[SERVER] wrong - use 'internet.sshtunnel.py -h' for help") |
||||
|
sys.exit(1) |
||||
|
ssh_server = sys.argv[2] |
||||
|
|
||||
|
# genenate additional parameter for autossh (forwarding ports) |
||||
|
if len(sys.argv) < 4: |
||||
|
print("[INTERNAL-PORT]<[EXTERNAL-PORT] missing") |
||||
|
sys.exit(1) |
||||
|
ssh_ports="" |
||||
|
additional_parameters="" |
||||
|
i = 3 |
||||
|
while i < len(sys.argv): |
||||
|
|
||||
|
# check forwarding format |
||||
|
if sys.argv[i].count("<") != 1: |
||||
|
print("[INTERNAL-PORT]<[EXTERNAL-PORT] wrong format '%s'" % (sys.argv[i])) |
||||
|
sys.exit(1) |
||||
|
|
||||
|
# get ports |
||||
|
sys.argv[i] = re.sub('"','', sys.argv[i] ) |
||||
|
ports = sys.argv[i].split("<") |
||||
|
port_internal = ports[0] |
||||
|
port_external = ports[1] |
||||
|
if port_internal.isdigit() == False: |
||||
|
print("[INTERNAL-PORT]<[EXTERNAL-PORT] internal not number '%s'" % (sys.argv[i])) |
||||
|
sys.exit(1) |
||||
|
if port_external.isdigit() == False: |
||||
|
print("[INTERNAL-PORT]<[EXTERNAL-PORT] external not number '%s'" % (sys.argv[i])) |
||||
|
sys.exit(1) |
||||
|
if port_internal == LNDPORT: |
||||
|
print("Detected LND Port Forwarding") |
||||
|
forwardingLND = True |
||||
|
if port_internal != port_external: |
||||
|
print("FAIL: When tunneling your local LND port '%s' it needs to be the same on the external server, but is '%s'" % (LNDPORT,port_external)) |
||||
|
print("Try again by using the same port. If you cant change the external port, change local LND port with: /home/admin/config.scripts/lnd.setport.sh") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
ssh_ports = ssh_ports + "\"%s\" " % (sys.argv[i]) |
||||
|
additional_parameters= additional_parameters + "-R %s:localhost:%s " % (port_external,port_internal) |
||||
|
i=i+1 |
||||
|
|
||||
|
# genenate additional parameter for autossh (server) |
||||
|
ssh_ports = ssh_ports.strip() |
||||
|
additional_parameters= additional_parameters + ssh_server |
||||
|
|
||||
|
# generate custom service config |
||||
|
service_data = SERVICETEMPLATE.replace("[PLACEHOLDER]", additional_parameters) |
||||
|
|
||||
|
# debug print out service |
||||
|
print() |
||||
|
print("*** New systemd service: %s" % (SERVICENAME)) |
||||
|
print(service_data) |
||||
|
|
||||
|
# write service file |
||||
|
service_file = open("/home/admin/temp.service", "w") |
||||
|
service_file.write(service_data) |
||||
|
service_file.close() |
||||
|
subprocess.call("sudo mv /home/admin/temp.service %s" % (SERVICEFILE), shell=True) |
||||
|
|
||||
|
# check if SSH keys for root user need to be created |
||||
|
print() |
||||
|
print("*** Checking root SSH pub keys") |
||||
|
ssh_pubkey="" |
||||
|
try: |
||||
|
ssh_pubkey = subprocess.check_output("sudo cat /root/.ssh/id_rsa.pub", shell=True, universal_newlines=True) |
||||
|
print("OK - root id_rsa.pub file exists") |
||||
|
except subprocess.CalledProcessError as e: |
||||
|
print("Generating root SSH keys ...") |
||||
|
subprocess.call("sudo sh -c 'yes y | sudo -u root ssh-keygen -b 2048 -t rsa -f ~/.ssh/id_rsa -q -N \"\"'", shell=True) |
||||
|
ssh_pubkey = subprocess.check_output("sudo cat /root/.ssh/id_rsa.pub", shell=True, universal_newlines=True) |
||||
|
|
||||
|
# copy SSH keys for backup (for update with new sd card) |
||||
|
print("making backup copy of SSH keys") |
||||
|
subprocess.call("sudo cp -r /root/.ssh /mnt/hdd/ssh/root_backup", shell=True) |
||||
|
print("DONE") |
||||
|
|
||||
|
# write ssh tunnel data to raspiblitz config (for update with new sd card) |
||||
|
print("*** Updating RaspiBlitz Config") |
||||
|
with open('/mnt/hdd/raspiblitz.conf') as f: |
||||
|
file_content = f.read() |
||||
|
if file_content.count("sshtunnel=") == 0: |
||||
|
file_content = file_content+"\nsshtunnel=''" |
||||
|
file_content = re.sub("sshtunnel=.*", "sshtunnel='%s %s'" % (ssh_server, ssh_ports), file_content) |
||||
|
if restoringOnUpdate == False: |
||||
|
serverdomain=ssh_server.split("@")[1] |
||||
|
|
||||
|
# make sure serverdomain is set as tls alias |
||||
|
print("Setting server as tls alias") |
||||
|
oldConfigHash=subprocess.getoutput("sudo shasum -a 256 /mnt/hdd/lnd/lnd.conf") |
||||
|
subprocess.call("sudo sed -i \"s/^#tlsextradomain=.*/tlsextradomain=/g\" /mnt/hdd/lnd/lnd.conf", shell=True) |
||||
|
subprocess.call("sudo sed -i \"s/^tlsextradomain=.*/tlsextradomain=%s/g\" /mnt/hdd/lnd/lnd.conf" % (serverdomain), shell=True) |
||||
|
newConfigHash=subprocess.getoutput("sudo shasum -a 256 /mnt/hdd/lnd/lnd.conf") |
||||
|
if oldConfigHash != newConfigHash: |
||||
|
print("lnd.conf changed ... generating new TLS cert") |
||||
|
subprocess.call("sudo /home/admin/config.scripts/lnd.newtlscert.sh", shell=True) |
||||
|
else: |
||||
|
print("lnd.conf unchanged... keep TLS cert") |
||||
|
|
||||
|
if forwardingLND: |
||||
|
# setting server explicitly on LND if LND port is forwarded |
||||
|
print("Setting fixed address for LND with raspiblitz lndAddress") |
||||
|
file_content = re.sub("lndAddress=.*", "lndAddress='%s'" % (serverdomain), file_content) |
||||
|
else: |
||||
|
print("No need to set fixed address for LND with raspiblitz lndAddress") |
||||
|
file_content = "".join([s for s in file_content.splitlines(True) if s.strip("\r\n")]) + "\n" |
||||
|
print(file_content) |
||||
|
with open("/mnt/hdd/raspiblitz.conf", "w") as text_file: |
||||
|
text_file.write(file_content) |
||||
|
print("DONE") |
||||
|
|
||||
|
# make sure autossh is installed |
||||
|
# https://www.everythingcli.org/ssh-tunnelling-for-fun-and-profit-autossh/ |
||||
|
print() |
||||
|
print("*** Install autossh") |
||||
|
subprocess.call("sudo apt-get install -y autossh", shell=True) |
||||
|
|
||||
|
# enable service |
||||
|
print() |
||||
|
print("*** Enabling systemd service: %s" % (SERVICENAME)) |
||||
|
subprocess.call("sudo systemctl daemon-reload", shell=True) |
||||
|
subprocess.call("sudo systemctl enable %s" % (SERVICENAME), shell=True) |
||||
|
|
||||
|
# final info (can be ignored if run by other script) |
||||
|
print() |
||||
|
print("**************************************") |
||||
|
print("*** WIN - SSH TUNNEL SERVICE SETUP ***") |
||||
|
print("**************************************") |
||||
|
print("See chapter 'How to setup port-forwarding with a SSH tunnel?' in:") |
||||
|
print("https://github.com/rootzoll/raspiblitz/blob/master/FAQ.md") |
||||
|
print("- Tunnel service needs final reboot to start.") |
||||
|
print("- After reboot check logs: sudo journalctl -f -u %s" % (SERVICENAME)) |
||||
|
print("- Make sure the SSH pub key of this RaspiBlitz is in 'authorized_keys' of %s :" % (ssh_server)) |
||||
|
print(ssh_pubkey) |
||||
|
print() |
||||
|
|
||||
|
# |
||||
|
# SWITCHING OFF |
||||
|
# |
||||
|
|
||||
|
elif sys.argv[1] == "off": |
||||
|
|
||||
|
print("*** Disabling systemd service: %s" % (SERVICENAME)) |
||||
|
subprocess.call("sudo systemctl stop %s" % (SERVICENAME), shell=True) |
||||
|
subprocess.call("sudo systemctl disable %s" % (SERVICENAME), shell=True) |
||||
|
subprocess.call("sudo systemctl reset-failed", shell=True) |
||||
|
subprocess.call("sudo rm %s" % (SERVICEFILE), shell=True) |
||||
|
subprocess.call("sudo systemctl daemon-reload", shell=True) |
||||
|
print("OK Done") |
||||
|
print() |
||||
|
|
||||
|
print("*** Removing LND Address") |
||||
|
subprocess.call("sudo /home/admin/config.scripts/lnd.setaddress.sh off", shell=True) |
||||
|
print() |
||||
|
|
||||
|
print("*** Removing SSH Tunnel data from RaspiBlitz config") |
||||
|
with open('/mnt/hdd/raspiblitz.conf') as f: |
||||
|
file_content = f.read() |
||||
|
file_content = re.sub("sshtunnel=.*", "", file_content) |
||||
|
file_content = re.sub("\n\n", "\n", file_content) |
||||
|
print(file_content) |
||||
|
with open("/mnt/hdd/raspiblitz.conf", "w") as text_file: |
||||
|
text_file.write(file_content) |
||||
|
print("OK Done") |
||||
|
|
||||
|
# |
||||
|
# UNKOWN PARAMETER |
||||
|
# |
||||
|
|
||||
|
else: |
||||
|
print ("unkown parameter - use 'internet.sshtunnel.py -h' for help") |
||||
@ -0,0 +1,178 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
if [ $# -eq 0 ]; then |
||||
|
echo "# script to check LND states" |
||||
|
echo "# lnd.check.sh basic-setup" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# load raspiblitz conf |
||||
|
source /mnt/hdd/raspiblitz.conf |
||||
|
|
||||
|
# check basic LND setup |
||||
|
if [ "$1" == "basic-setup" ]; then |
||||
|
|
||||
|
# check TLS exits |
||||
|
tlsExists=$(sudo ls /mnt/hdd/lnd/tls.cert 2>/dev/null | grep -c 'tls.cert') |
||||
|
if [ ${tlsExists} -gt 0 ]; then |
||||
|
echo "tls=1" |
||||
|
else |
||||
|
echo "tls=0" |
||||
|
echo "err='tls.cert is missing in /mnt/hdd/lnd'" |
||||
|
fi |
||||
|
# check TLS exits (on SD card for admin) |
||||
|
tlsExists=$(sudo ls /home/admin/.lnd/tls.cert 2>/dev/null | grep -c 'tls.cert') |
||||
|
if [ ${tlsExists} -gt 0 ]; then |
||||
|
echo "tlsCopy=1" |
||||
|
# check if the same |
||||
|
orgChecksum=$(sudo shasum -a 256 /mnt/hdd/lnd/tls.cert 2>/dev/null | cut -d " " -f1) |
||||
|
cpyChecksum=$(sudo shasum -a 256 /home/admin/.lnd/tls.cert 2>/dev/null | cut -d " " -f1) |
||||
|
if [ "${orgChecksum}" == "${cpyChecksum}" ]; then |
||||
|
echo "tlsMismatch=0" |
||||
|
else |
||||
|
echo "tlsMismatch=1" |
||||
|
echo "err='tls.cert for user admin is old'" |
||||
|
fi |
||||
|
else |
||||
|
echo "tlsCopy=0" |
||||
|
echo "tlsMismatch=0" |
||||
|
echo "err='tls.cert is missing for user admin'" |
||||
|
fi |
||||
|
|
||||
|
# check lnd.conf exits |
||||
|
lndConfExists=$(sudo ls /mnt/hdd/lnd/lnd.conf 2>/dev/null | grep -c 'lnd.conf') |
||||
|
if [ ${lndConfExists} -gt 0 ]; then |
||||
|
echo "config=1" |
||||
|
else |
||||
|
echo "config=0" |
||||
|
echo "err='lnd.conf is missing in /mnt/hdd/lnd'" |
||||
|
fi |
||||
|
# check lnd.conf exits (on SD card for admin) |
||||
|
lndConfExists=$(sudo ls /home/admin/.lnd/lnd.conf 2>/dev/null | grep -c 'lnd.conf') |
||||
|
if [ ${lndConfExists} -gt 0 ]; then |
||||
|
echo "configCopy=1" |
||||
|
# check if the same |
||||
|
orgChecksum=$(sudo shasum -a 256 /mnt/hdd/lnd/lnd.conf 2>/dev/null | cut -d " " -f1) |
||||
|
cpyChecksum=$(sudo shasum -a 256 /home/admin/.lnd/lnd.conf 2>/dev/null | cut -d " " -f1) |
||||
|
if [ "${orgChecksum}" == "${cpyChecksum}" ]; then |
||||
|
echo "configMismatch=0" |
||||
|
else |
||||
|
echo "configMismatch=1" |
||||
|
echo "err='lnd.conf for user admin is old'" |
||||
|
fi |
||||
|
else |
||||
|
echo "configCopy=0" |
||||
|
echo "configMismatch=0" |
||||
|
echo "err='lnd.conf is missing for user admin'" |
||||
|
fi |
||||
|
|
||||
|
# get network from config (BLOCKCHAIN) |
||||
|
lndNetwork="" |
||||
|
source <(sudo cat /mnt/hdd/lnd/lnd.conf 2>/dev/null | grep 'bitcoin.active' | sed 's/^[a-z]*\./bitcoin_/g') |
||||
|
source <(sudo cat /mnt/hdd/lnd/lnd.conf 2>/dev/null | grep 'litecoin.active' | sed 's/^[a-z]*\./litecoin_/g') |
||||
|
if [ "${bitcoin_active}" == "1" ] && [ "${litecoin_active}" == "1" ]; then |
||||
|
echo "err='lnd.conf: bitcoin and litecoin are set active at the same time'" |
||||
|
elif [ "${bitcoin_active}" == "1" ]; then |
||||
|
lndNetwork="bitcoin" |
||||
|
elif [ "${litecoin_active}" == "1" ]; then |
||||
|
lndNetwork="litecoin" |
||||
|
else |
||||
|
echo "err='lnd.conf: no blockchain network is set'" |
||||
|
fi |
||||
|
echo "network='${lndNetwork}'" |
||||
|
|
||||
|
# check if network is same the raspiblitz config |
||||
|
if [ "${network}" != "${lndNetwork}" ]; then |
||||
|
echo "err='lnd.conf: blockchain network in lnd.conf (${lndNetwork}) is different from raspiblitz.conf (${network})'" |
||||
|
fi |
||||
|
|
||||
|
# get chain from config (TESTNET / MAINNET) |
||||
|
lndChain="" |
||||
|
source <(sudo cat /mnt/hdd/lnd/lnd.conf 2>/dev/null | grep "${lndNetwork}.mainnet" | sed 's/^[a-z]*\.//g') |
||||
|
source <(sudo cat /mnt/hdd/lnd/lnd.conf 2>/dev/null | grep "${lndNetwork}.testnet" | sed 's/^[a-z]*\.//g') |
||||
|
if [ "${mainnet}" == "1" ] && [ "${testnet}" == "1" ]; then |
||||
|
echo "err='lnd.conf: mainnet and testnet are set active at the same time'" |
||||
|
elif [ "${mainnet}" == "1" ]; then |
||||
|
lndChain="main" |
||||
|
elif [ "${testnet}" == "1" ]; then |
||||
|
lndChain="test" |
||||
|
else |
||||
|
echo "err='lnd.conf: neither testnet or mainnet is set active (raspiblitz needs one of them active in lnd.conf)'" |
||||
|
fi |
||||
|
echo "chain='${lndChain}'" |
||||
|
|
||||
|
# check if chain is same the raspiblitz config |
||||
|
if [ "${chain}" != "${lndChain}" ]; then |
||||
|
echo "err='lnd.conf: testnet/mainnet in lnd.conf (${lndChain}) is different from raspiblitz.conf (${chain})'" |
||||
|
fi |
||||
|
|
||||
|
# check for admin macaroon exist (on HDD) |
||||
|
adminMacaroonExists=$(sudo ls /mnt/hdd/lnd/data/chain/${network}/${chain}net/admin.macaroon 2>/dev/null | grep -c 'admin.macaroon') |
||||
|
if [ ${adminMacaroonExists} -gt 0 ]; then |
||||
|
echo "macaroon=1" |
||||
|
else |
||||
|
echo "macaroon=0" |
||||
|
echo "err='admin.macaroon is missing in /mnt/hdd/lnd/data/chain/${network}/${chain}net'" |
||||
|
fi |
||||
|
# check for admin macaroon exist (on SD card for admin) |
||||
|
adminMacaroonExists=$(sudo ls /home/admin/.lnd/data/chain/${network}/${chain}net/admin.macaroon 2>/dev/null | grep -c 'admin.macaroon') |
||||
|
if [ ${adminMacaroonExists} -gt 0 ]; then |
||||
|
echo "macaroonCopy=1" |
||||
|
# check if the same |
||||
|
orgChecksum=$(sudo shasum -a 256 /mnt/hdd/lnd/data/chain/${network}/${chain}net/admin.macaroon 2>/dev/null | cut -d " " -f1) |
||||
|
cpyChecksum=$(sudo shasum -a 256 /home/admin/.lnd/data/chain/${network}/${chain}net/admin.macaroon 2>/dev/null | cut -d " " -f1) |
||||
|
if [ "${orgChecksum}" == "${cpyChecksum}" ]; then |
||||
|
echo "macaroonMismatch=0" |
||||
|
else |
||||
|
echo "macaroonMismatch=1" |
||||
|
echo "err='admin.macaroon for user admin is old'" |
||||
|
fi |
||||
|
else |
||||
|
echo "macaroonCopy=0" |
||||
|
echo "macaroonMismatch=0" |
||||
|
echo "err='admin.macaroon is missing for user admin" |
||||
|
fi |
||||
|
|
||||
|
# check for walletDB exist |
||||
|
walletExists=$(sudo ls /mnt/hdd/lnd/data/chain/${network}/${chain}net/wallet.db 2>/dev/null | grep -c 'wallet.db') |
||||
|
if [ ${walletExists} -gt 0 ]; then |
||||
|
echo "wallet=1" |
||||
|
else |
||||
|
echo "wallet=0" |
||||
|
fi |
||||
|
|
||||
|
# check that RPC USER between Bitcoin and LND is correct |
||||
|
rpcusercorrect=0 |
||||
|
source <(sudo cat /mnt/hdd/lnd/lnd.conf 2>/dev/null | grep "${lndNetwork}d.rpcuser" | sed 's/^[a-z]*\./lnd/g') |
||||
|
source <(sudo cat /mnt/hdd/${lndNetwork}/${lndNetwork}.conf 2>/dev/null | grep "rpcuser" | sed 's/^[a-z]*\./lnd/g') |
||||
|
if [ ${#lndrpcuser} -eq 0 ]; then |
||||
|
echo "err='lnd.conf: missing ${lndNetwork}d.rpcuser (needs to be same as set in ${lndNetwork}.conf)'" |
||||
|
elif [ ${#rpcuser} -eq 0 ]; then |
||||
|
echo "err='${lndNetwork}.conf: missing rpcuser (needs to be same as set in lnd.conf)'" |
||||
|
elif [ "${rpcuser}" != "${lndrpcuser}" ]; then |
||||
|
echo "err='${lndNetwork}.conf (${rpcuser}) & lnd.conf (${lndrpcuser}): RPC user missmatch! - LND cannot connect to blockchain RPC'" |
||||
|
else |
||||
|
# OK looks good |
||||
|
rpcusercorrect=1 |
||||
|
fi |
||||
|
echo "rpcusercorrect=${rpcusercorrect}" |
||||
|
|
||||
|
# check that RPC PASSWORD between Bitcoin and LND is correct |
||||
|
rpcpasscorrect=0 |
||||
|
source <(sudo cat /mnt/hdd/lnd/lnd.conf 2>/dev/null | grep "${lndNetwork}d.rpcpass" | sed 's/^[a-z]*\./lnd/g') |
||||
|
source <(sudo cat /mnt/hdd/${lndNetwork}/${lndNetwork}.conf 2>/dev/null | grep "rpcpassword" | sed 's/^[a-z]*\./lnd/g') |
||||
|
if [ ${#lndrpcpass} -eq 0 ]; then |
||||
|
echo "err='lnd.conf: missing ${lndNetwork}d.rpcpass (needs to be same as set in ${lndNetwork}.conf)'" |
||||
|
elif [ ${#rpcpassword} -eq 0 ]; then |
||||
|
echo "err='${lndNetwork}.conf: missing rpcpassword (needs to be same as set in lnd.conf)'" |
||||
|
elif [ "${rpcpassword}" != "${lndrpcpass}" ]; then |
||||
|
echo "err='${lndNetwork}.conf (${rpcpassword}) & lnd.conf (${lndrpcpass}): RPC password missmatch! - should autofix on reboot'" |
||||
|
else |
||||
|
# OK looks good |
||||
|
rpcpasscorrect=1 |
||||
|
fi |
||||
|
echo "rpcpasscorrect=${rpcpasscorrect}" |
||||
|
|
||||
|
else |
||||
|
echo "# FAIL: parameter not known" |
||||
|
fi |
||||
@ -0,0 +1,204 @@ |
|||||
|
#!/usr/bin/python |
||||
|
import codecs, os, sys, base64 |
||||
|
|
||||
|
# display config script info |
||||
|
if len(sys.argv) <= 1 or sys.argv[1] == "-h" or sys.argv[1] == "help": |
||||
|
print("# ! always activate virtual env first: source /home/admin/python-env-lnd/bin/activate") |
||||
|
print("# ! and run with with: python /home/admin/config.scripts/lnd.initwallet.py") |
||||
|
print("# creating or recovering the LND wallet") |
||||
|
print("# lnd.winitwallet.py new [walletpassword] [?seedpassword]") |
||||
|
print("# lnd.winitwallet.py seed [walletpassword] [\"seeds-words-seperated-spaces\"] [?seedpassword]") |
||||
|
print("# lnd.winitwallet.py scb [walletpassword] [\"seeds-words-seperated-spaces\"] [filepathSCB] [?seedpassword]") |
||||
|
print("err='missing parameters'") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
import grpc |
||||
|
from lndlibs import rpc_pb2 as ln |
||||
|
from lndlibs import rpc_pb2_grpc as lnrpc |
||||
|
from pathlib2 import Path |
||||
|
|
||||
|
walletpassword="" |
||||
|
seedwords="" |
||||
|
seedpassword="" |
||||
|
filepathSCB="" |
||||
|
|
||||
|
mode=sys.argv[1] |
||||
|
|
||||
|
if mode=="new": |
||||
|
|
||||
|
print("# *** CREATING NEW LND WALLET ***") |
||||
|
|
||||
|
if len(sys.argv)>2: |
||||
|
walletpassword=sys.argv[2] |
||||
|
if len(walletpassword)<8: |
||||
|
print("err='wallet password is too short'") |
||||
|
sys.exit(1) |
||||
|
else: |
||||
|
print("err='wallet password is too short'") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
if len(sys.argv)>3: |
||||
|
seedpassword=sys.argv[3] |
||||
|
|
||||
|
elif mode=="seed" or mode=="scb": |
||||
|
|
||||
|
if len(sys.argv)>2: |
||||
|
walletpassword=sys.argv[2] |
||||
|
if len(walletpassword)<8: |
||||
|
print("err='wallet password is too short'") |
||||
|
sys.exit(1) |
||||
|
else: |
||||
|
print("err='not correct amount of parameter - missing wallet password'") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
if len(sys.argv)>3: |
||||
|
seedwordString=sys.argv[3] |
||||
|
seedwords=seedwordString.split(" ") |
||||
|
if len(seedwords)<24: |
||||
|
print("err='not 24 seed words seperated by just spaces (surrounded with \")'") |
||||
|
sys.exit(1) |
||||
|
else: |
||||
|
print("err='not correct amount of parameter - missing seed string'") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
if mode=="seed": |
||||
|
|
||||
|
if len(sys.argv)>4: |
||||
|
seedpassword=sys.argv[4] |
||||
|
|
||||
|
elif mode=="scb": |
||||
|
|
||||
|
if len(sys.argv)>4: |
||||
|
filepathSCB=sys.argv[4] |
||||
|
scbFile = Path(filepathSCB) |
||||
|
if scbFile.is_file(): |
||||
|
print("# OK SCB file exists") |
||||
|
else: |
||||
|
print("err='the given filepathSCB - file does not exists or no permission'") |
||||
|
sys.exit(1) |
||||
|
else: |
||||
|
print("err='not correct amount of parameter - missing seed filepathSCB'") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
if len(sys.argv)>5: |
||||
|
seedpassword=sys.argv[4] |
||||
|
|
||||
|
else: |
||||
|
|
||||
|
print("err='unkown mode parameter - run without any parameters to see options'") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
os.environ['GRPC_SSL_CIPHER_SUITES'] = 'HIGH+ECDSA' |
||||
|
cert = open('/mnt/hdd/lnd/tls.cert', 'rb').read() |
||||
|
ssl_creds = grpc.ssl_channel_credentials(cert) |
||||
|
channel = grpc.secure_channel('localhost:10009', ssl_creds) |
||||
|
stub = lnrpc.WalletUnlockerStub(channel) |
||||
|
if mode=="new": |
||||
|
|
||||
|
request = ln.GenSeedRequest() |
||||
|
try: |
||||
|
response = stub.GenSeed(request) |
||||
|
seedwords = response.cipher_seed_mnemonic |
||||
|
seedwordsString=', '.join(seedwords) |
||||
|
print("seedwords='"+seedwordsString+"'") |
||||
|
|
||||
|
# add a 6x4 formatted version to the output |
||||
|
seedwords6x4="" |
||||
|
for i in range(0,len(seedwords)): |
||||
|
if i % 6 == 0 and i != 0: |
||||
|
seedwords6x4=seedwords6x4+"\n" |
||||
|
singleWord=str(i+1)+":"+seedwords[i] |
||||
|
while len(singleWord)<12: |
||||
|
singleWord=singleWord+" " |
||||
|
seedwords6x4=seedwords6x4+singleWord |
||||
|
print("seedwords6x4='"+seedwords6x4+"'") |
||||
|
|
||||
|
except grpc.RpcError as rpc_error_call: |
||||
|
code = rpc_error_call.code() |
||||
|
print >> sys.stderr, code |
||||
|
details = rpc_error_call.details() |
||||
|
print("err='RPCError GenSeedRequest'") |
||||
|
print("errMore='"+details+"'") |
||||
|
sys.exit(1) |
||||
|
except: |
||||
|
e = sys.exc_info()[0] |
||||
|
print >> sys.stderr, e |
||||
|
print("err='GenSeedRequest'") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
request = ln.InitWalletRequest( |
||||
|
wallet_password=walletpassword, |
||||
|
cipher_seed_mnemonic=seedwords |
||||
|
) |
||||
|
try: |
||||
|
response = stub.InitWallet(request) |
||||
|
except grpc.RpcError as rpc_error_call: |
||||
|
code = rpc_error_call.code() |
||||
|
print >> sys.stderr, code |
||||
|
details = rpc_error_call.details() |
||||
|
print("err='RPCError InitWallet'") |
||||
|
print("errMore='"+details+"'") |
||||
|
sys.exit(1) |
||||
|
except: |
||||
|
e = sys.exc_info()[0] |
||||
|
print >> sys.stderr, e |
||||
|
print("err='InitWallet'") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
elif mode=="seed": |
||||
|
|
||||
|
request = ln.InitWalletRequest( |
||||
|
wallet_password=walletpassword, |
||||
|
cipher_seed_mnemonic=seedwords, |
||||
|
recovery_window=250, |
||||
|
aezeed_passphrase=seedpassword |
||||
|
) |
||||
|
|
||||
|
try: |
||||
|
response = stub.InitWallet(request) |
||||
|
except grpc.RpcError as rpc_error_call: |
||||
|
code = rpc_error_call.code() |
||||
|
print >> sys.stderr, code |
||||
|
details = rpc_error_call.details() |
||||
|
print("err='RPCError InitWallet'") |
||||
|
print("errMore='"+details+"'") |
||||
|
sys.exit(1) |
||||
|
except: |
||||
|
e = sys.exc_info()[0] |
||||
|
print >> sys.stderr, e |
||||
|
print("err='InitWallet'") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
elif mode=="scb": |
||||
|
|
||||
|
import binascii |
||||
|
with open(filepathSCB, 'rb') as f: |
||||
|
content = f.read() |
||||
|
scbHexString=binascii.hexlify(content) |
||||
|
print(scbHexString) |
||||
|
|
||||
|
request = ln.InitWalletRequest( |
||||
|
wallet_password=walletpassword, |
||||
|
cipher_seed_mnemonic=seedwords, |
||||
|
recovery_window=250, |
||||
|
aezeed_passphrase=seedpassword, |
||||
|
channel_backups=scbHexString |
||||
|
) |
||||
|
|
||||
|
try: |
||||
|
response = stub.InitWallet(request) |
||||
|
except grpc.RpcError as rpc_error_call: |
||||
|
code = rpc_error_call.code() |
||||
|
print >> sys.stderr, code |
||||
|
details = rpc_error_call.details() |
||||
|
print("err='RPCError InitWallet'") |
||||
|
print("errMore='"+details+"'") |
||||
|
sys.exit(1) |
||||
|
except: |
||||
|
e = sys.exc_info()[0] |
||||
|
print >> sys.stderr, e |
||||
|
print("err='InitWallet'") |
||||
|
sys.exit(1) |
||||
|
|
||||
|
print("err='TODO: implement creating from seed/scb'") |
||||
|
sys.exit(1) |
||||
@ -0,0 +1,98 @@ |
|||||
|
#!/bin/bash |
||||
|
|
||||
|
# INFO : Does not need to be part of update/provision, because |
||||
|
# all data is already on HDD ready |
||||
|
|
||||
|
# command info |
||||
|
if [ $# -eq 0 ] || [ "$1" = "-h" ] || [ "$1" = "-help" ]; then |
||||
|
echo "small config script to set a fixed domain or IP for LND" |
||||
|
echo "internet.setaddress.sh [on|off] [?address]" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# 1. parameter [on|off] |
||||
|
mode="$1" |
||||
|
|
||||
|
echo "number of args($#)" |
||||
|
|
||||
|
# config file |
||||
|
configFile="/mnt/hdd/raspiblitz.conf" |
||||
|
|
||||
|
# lnd conf file |
||||
|
lndConfig="/mnt/hdd/lnd/lnd.conf" |
||||
|
|
||||
|
# check if config file exists |
||||
|
configExists=$(ls ${configFile} | grep -c '.conf') |
||||
|
if [ ${configExists} -eq 0 ]; then |
||||
|
echo "FAIL - missing ${configFile}" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
# get hash of lnd.conf before edit (to detect if changed later) |
||||
|
md5HashBefore=$(sudo shasum -a 256 /mnt/hdd/lnd/lnd.conf) |
||||
|
|
||||
|
# FIXED DOMAIN/IP |
||||
|
if [ "${mode}" = "on" ]; then |
||||
|
|
||||
|
address=$2 |
||||
|
if [ ${#address} -eq 0 ]; then |
||||
|
echo "missing parameter" |
||||
|
exit 1 |
||||
|
fi |
||||
|
|
||||
|
echo "switching fixed LND Domain ON" |
||||
|
echo "address(${address})" |
||||
|
|
||||
|
# setting value in raspi blitz config |
||||
|
sudo sed -i "s/^lndAddress=.*/lndAddress='${address}'/g" /mnt/hdd/raspiblitz.conf |
||||
|
|
||||
|
echo "changing lnd.conf" |
||||
|
|
||||
|
# lnd.conf: uncomment tlsextradomain (just if it is still uncommented) |
||||
|
sudo sed -i "s/^#tlsextradomain=.*/tlsextradomain=/g" /mnt/hdd/lnd/lnd.conf |
||||
|
|
||||
|
# lnd.conf: domain value |
||||
|
sudo sed -i "s/^tlsextradomain=.*/tlsextradomain=${address}/g" /mnt/hdd/lnd/lnd.conf |
||||
|
|
||||
|
# refresh TLS cert |
||||
|
md5HashAfter=$(sudo shasum -a 256 /mnt/hdd/lnd/lnd.conf) |
||||
|
if [ "${md5HashAfter}" != "${md5HashBefore}" ]; then |
||||
|
echo "# lnd.conf changed - TLS certs need refreshing" |
||||
|
sudo /home/admin/config.scripts/lnd.newtlscert.sh |
||||
|
else |
||||
|
echo "# lnd.conf NOT changed - keep TLS certs" |
||||
|
fi |
||||
|
|
||||
|
echo "fixedAddress is now ON" |
||||
|
fi |
||||
|
|
||||
|
# switch off |
||||
|
if [ "${mode}" = "off" ]; then |
||||
|
echo "switching fixedAddress OFF" |
||||
|
|
||||
|
# stop services |
||||
|
echo "making sure services are not running" |
||||
|
sudo systemctl stop lnd 2>/dev/null |
||||
|
|
||||
|
# setting value in raspi blitz config |
||||
|
sudo sed -i "s/^lndAddress=.*/lndAddress=''/g" /mnt/hdd/raspiblitz.conf |
||||
|
|
||||
|
echo "changing lnd.conf" |
||||
|
|
||||
|
# lnd.conf: comment tlsextradomain out |
||||
|
sudo sed -i "s/^tlsextradomain=.*/#tlsextradomain=/g" /mnt/hdd/lnd/lnd.conf |
||||
|
|
||||
|
# refresh TLS cert |
||||
|
md5HashAfter=$(sudo shasum -a 256 /mnt/hdd/lnd/lnd.conf) |
||||
|
if [ "${md5HashAfter}" != "${md5HashBefore}" ]; then |
||||
|
echo "# lnd.conf changed - TLS certs need refreshing" |
||||
|
sudo /home/admin/config.scripts/lnd.newtlscert.sh |
||||
|
else |
||||
|
echo "# lnd.conf NOT changed - keep TLS certs" |
||||
|
fi |
||||
|
|
||||
|
echo "fixedAddress is now OFF" |
||||
|
fi |
||||
|
|
||||
|
echo "may needs reboot to run normal again" |
||||
|
exit 0 |
||||
@ -0,0 +1,28 @@ |
|||||
|
For every new LND version the LND RPC libs need to be compiled from the matching protobuff files. |
||||
|
Do this on a raspberrypi with the exact same python version the scripts will be are running on. |
||||
|
See https://dev.lightning.community/guides/python-grpc/ |
||||
|
|
||||
|
Make sure Virtual Environment is setup: |
||||
|
``` |
||||
|
sudo apt-get -f -y install virtualenv |
||||
|
virtualenv lnd |
||||
|
source lnd/bin/activate |
||||
|
pip install grpcio grpcio-tools googleapis-common-protos |
||||
|
``` |
||||
|
|
||||
|
Normally that is already done by build_sdcard.sh for user admin user. So just run: |
||||
|
``` |
||||
|
source lnd/bin/activate |
||||
|
```` |
||||
|
|
||||
|
Now to generate the lnd RPC libs: |
||||
|
``` |
||||
|
git clone https://github.com/googleapis/googleapis.git |
||||
|
curl -o rpc.proto -s https://raw.githubusercontent.com/lightningnetwork/lnd/master/lnrpc/rpc.proto |
||||
|
python -m grpc_tools.protoc --proto_path=googleapis:. --python_out=. --grpc_python_out=. rpc.proto |
||||
|
```` |
||||
|
|
||||
|
*NOTE: If LND master branch is already a version ahead .. use the rpc.proto from the version tagged branch.* |
||||
|
|
||||
|
Now copy the generated RPC libs per SCP over to your Laptop and add them to the `/home/admin/config.scripts/lndlibs`. |
||||
|
|
||||
File diff suppressed because it is too large
File diff suppressed because one or more lines are too long
Binary file not shown.
File diff suppressed because it is too large
Binary file not shown.
File diff suppressed because it is too large
|
After Width: | Height: | Size: 38 KiB |
|
Before Width: | Height: | Size: 2.8 MiB After Width: | Height: | Size: 2.6 MiB |
|
Before Width: | Height: | Size: 19 KiB After Width: | Height: | Size: 24 KiB |
|
Before Width: | Height: | Size: 46 KiB After Width: | Height: | Size: 59 KiB |
|
Before Width: | Height: | Size: 26 KiB After Width: | Height: | Size: 26 KiB |
|
Before Width: | Height: | Size: 29 KiB After Width: | Height: | Size: 29 KiB |
|
Before Width: | Height: | Size: 26 KiB After Width: | Height: | Size: 29 KiB |
|
Before Width: | Height: | Size: 14 KiB After Width: | Height: | Size: 56 KiB |
|
After Width: | Height: | Size: 63 KiB |
Some files were not shown because too many files changed in this diff
Loading…
Reference in new issue