From b640a1cfb07f99bb047804b15bbb22b719396da0 Mon Sep 17 00:00:00 2001 From: rootzoll Date: Tue, 12 Feb 2019 22:41:32 +0100 Subject: [PATCH] updated FAQ --- FAQ.md | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/FAQ.md b/FAQ.md index 91d1d1d..12f9989 100644 --- a/FAQ.md +++ b/FAQ.md @@ -237,9 +237,12 @@ Thanks to @RobEdb (ask on twitter for more details) running his demo store with You dont need a LAN port on your laptop as long as you can connect over WLAN to the same LAN router/switch the RaspiBlitz is connected to .. and you are on the same local network. -## I just have WLAN - how to connect to my RaspiBlitz? +## Is it possible to connect the Blitz over Wifi instead of using a LAN cable? -## +A LAN cable is recommended because it reduces a possible source of error on the network connection side. But how to setup WLAN when you dont have a LAN-Router/Switch available see here: +https://github.com/Stadicus/guides/blob/master/raspibolt/raspibolt_20_pi.md#prepare-wifi + +## Can I directly connect the RaspiBlitz with my laptop? If you have a LAN port on your laptop - or you have a USB-LAN adapter, you can connect the RaspiBlitz directly (without a router/switch) to your laptop and share the WIFI internet connection. You can follow this [guide for OSX](https://medium.com/@tzhenghao/how-to-ssh-into-your-raspberry-pi-with-a-mac-and-ethernet-cable-636a197d055). @@ -471,11 +474,6 @@ Work Nodes for the process of producing a new sd card image release: There is an experimental section in this GitHub that tries to build for other SingleBoardComputers. Feel free to try it out and share your experience: [dietpi/README.md](dietpi/README.md) -## Is it possible to connect over Wifi instead of using a LAN cable? - -A LAN cable is recommended because it reduces a possible source of error on the network connection side. But how to setup WLAN when you dont have a LAN-Router/Switch available see here: -https://github.com/Stadicus/guides/blob/master/raspibolt/raspibolt_20_pi.md#prepare-wifi - ## How to setup fresh/clean/reset and not getting into recovery mode? When you put in a sd card with a new/clean RaspiBlitz image the RaspiBlitz will get into recovery mode because it detects the old data on your HDD and assumes you just want to continue to work with this data.