diff --git a/DietPi/after_reboot_with_2nd_HDD.png b/DietPi/after_reboot_with_2nd_HDD.png new file mode 100644 index 0000000..b4ea971 Binary files /dev/null and b/DietPi/after_reboot_with_2nd_HDD.png differ diff --git a/DietPi/hw_comparison.md b/DietPi/hw_comparison.md new file mode 100644 index 0000000..53cdc82 --- /dev/null +++ b/DietPi/hw_comparison.md @@ -0,0 +1,43 @@ +### ODROID-HC1 + +Key features +* Samsung Exynos5422 Cortex-A15 2Ghz and Cortex-A7 Octa core CPUs +* 2Gbyte LPDDR3 RAM PoP stacked +* SATA-3 port for 2.5inch HDD/SSD storage up to 15mm thickness +* Gigabit Ethernet port +* USB 2.0 Host +* UHS-1 capable micro-SD card slot for boot media +* Size : 147 x 85 x 29 mm approx.(including Aluminium cooling frame) +* Linux server OS images based on modern Kernel 4.14 LTS + +### ROCK64 4K60P HDR Single Board Computer + +ROCK64 is a credit card size 4K60P HDR Single Board Computer powered by +* Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and support up to +* 4GB 1600MHz LPDDR3 memory. It provides +* eMMC module socket, +* MicroSD Card slot, +* Pi-2 Bus, +* Pi-P5+ Bus, U +* SB 3.0 and many others peripheral devices interface for makers to integrate with sensors and devices. Various Operating System (OS) are made available by open source community such +* Android 7.1, +* Debian, +* BSD and many more to come. + +The ROCK64 4GB board designated as LTS (long Term Supply) model, PINE64 committed to supply at least for 5 years until year 2022 and beyond. + +### Raspberry Pi 3 Model B+ + +* Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz +* 1GB LPDDR2 SDRAM +* 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE +* Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps) +* Extended 40-pin GPIO header +* Full-size HDMI +* 4 USB 2.0 ports +* CSI camera port for connecting a Raspberry Pi camera +* DSI display port for connecting a Raspberry Pi touchscreen display +* 4-pole stereo output and composite video port +* Micro SD port for loading your operating system and storing data +* 5V/2.5A DC power input +* Power-over-Ethernet (PoE) support (requires separate PoE HAT) diff --git a/DietPi/initial_setup_output.html b/DietPi/initial_setup_output.html new file mode 100644 index 0000000..ea54d2d --- /dev/null +++ b/DietPi/initial_setup_output.html @@ -0,0 +1,131 @@ +
 RaspiBlitz
+ ─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
+
+                                                                            ┌──────────────────────────────────────────────────┐
+                                                                            │ OK - RPC password changed                        │  
+                                                                            │                                                  │  
+                                                                            │ Now starting the Setup of your RaspiBlitz.       │  
+                                                                            ├──────────────────────────────────────────────────┤  
+                                                                            │                     <  OK  >                     │  
+                                                                            └──────────────────────────────────────────────────┘  
+                                                                              
+
+HDD was already initialized/prepared
+Now needs to be mounted
+
+*** Adding HDD to the System ***
+started from state(waitsetup)
+OK - HDD found as sda
+
+*** Check HDD ***
+OK - HDD is formatted with ext4 and is named BLOCKCHAIN
+Adding line to /etc/fstab ...
+UUID=9f95b7b3-d634-4938-9f05-dfab3d662507 /mnt/hdd ext4 noexec,defaults 0 0
+OK - HDD is listed in /etc/fstab
+
+*** Mount HDD ***
+mkdir: cannot create directory ‘/mnt/hdd’: File exists
+OK - HDD is mounted
+
+moving SSH pub keys to HDD
+cp: cannot stat '/etc/ssh': No such file or directory
+OK
+
+*** Analysing HDD Content ***
+Looks like the HDD is prepared with the Blockchain.
+Continuing with finishing the system setup ...
+
+*** Checking HDD ***
+OK - HDD is ready.
+
+*** Prepare bitcoin ***
+OK - bitcoin setup ready
+
+*** Start bitcoin ***
+This can take a while ..
+Created symlink /etc/systemd/system/multi-user.target.wants/bitcoind.service → /etc/systemd/system/bitcoind.service.
+Started ... wait 10 secs
+checking setup script
+network(bitcoin)
+chain(main)
+setupStep(60)
+
+                                                                         ┌────────────────────────────────────────────────────────┐
+                                                                         │   Double checking for bitcoind - please wait ..        │  
+                                                                         │  ┌──────────────────────────────────────────────────┐  │  
+                                                                         │  │                         0                        │  │  
+                                                                         │  └──────────────────────────────────────────────────┘  │  
+                                                                         ├────────────────────────────────────────────────────────┤  
+                                                                         │               <  OK  >        <Cancel>                 │  
+                                                                         └────────────────────────────────────────────────────────┘  
+                                                                           
+
+
+OK - bitcoind is running
+Next step run Lightning
+
+*** Checking bitcoin ***
+OK - bitcoind is running
+
+*** Wait until bitcoind is ready ...
+OK - chainnetwork is working
+
+*** LND Config ***
+OK - LND config written
+
+*** Starting LND ***
+Created symlink /etc/systemd/system/multi-user.target.wants/lnd.service → /etc/systemd/system/lnd.service.
+
+                                                                         ┌────────────────────────────────────────────────────────┐
+                                                                         │   Starting LND - please wait ..                        │  
+                                                                         │  ┌──────────────────────────────────────────────────┐  │  
+                                                                         │  │                         0                        │  │  
+                                                                         │  └──────────────────────────────────────────────────┘  │  
+                                                                         ├────────────────────────────────────────────────────────┤  
+                                                                         │               <  OK  >        <Cancel>                 │  
+                                                                         └────────────────────────────────────────────────────────┘  
+                                                                           
+
+
+Failed to connect to bus: No such file or directory
+1548191459
+LND not ready yet ... waiting another 60 seconds.
+If this takes too long (more then 10min total) --> CTRL+c and report Problem
+Failed to connect to bus: No such file or directory
+1548191519
+LND not ready yet ... waiting another 60 seconds.
+If this takes too long (more then 10min total) --> CTRL+c and report Problem
+Failed to connect to bus: No such file or directory
+1548191519
+LND not ready yet ... waiting another 60 seconds.
+If this takes too long (more then 10min total) --> CTRL+c and report Problem
+Failed to connect to bus: No such file or directory
+1548191579
+LND not ready yet ... waiting another 60 seconds.
+If this takes too long (more then 10min total) --> CTRL+c and report Problem
+Failed to connect to bus: No such file or directory
+1548191639
+LND not ready yet ... waiting another 60 seconds.
+If this takes too long (more then 10min total) --> CTRL+c and report Problem
+Failed to connect to bus: No such file or directory
+1548191699
+LND not ready yet ... waiting another 60 seconds.
+If this takes too long (more then 10min total) --> CTRL+c and report Problem
+Failed to connect to bus: No such file or directory
+1548191759
+LND not ready yet ... waiting another 60 seconds.
+If this takes too long (more then 10min total) --> CTRL+c and report Problem
+Failed to connect to bus: No such file or directory
+1548191819
+LND not ready yet ... waiting another 60 seconds.
+If this takes too long (more then 10min total) --> CTRL+c and report Problem
+Failed to connect to bus: No such file or directory
+1548191879
+LND not ready yet ... waiting another 60 seconds.
+If this takes too long (more then 10min total) --> CTRL+c and report Problem
+Failed to connect to bus: No such file or directory
+1548191939
+LND not ready yet ... waiting another 60 seconds.
+If this takes too long (more then 10min total) --> CTRL+c and report Problem
+
+...
\ No newline at end of file
diff --git a/DietPi/install.md b/DietPi/install.md
new file mode 100644
index 0000000..a61c161
--- /dev/null
+++ b/DietPi/install.md
@@ -0,0 +1,63 @@
+Working with the ODroid HC1 and this image: https://dietpi.com/downloads/images/DietPi_OdroidXU4-ARMv7-Stretch.7z
+
+https://dietpi.com/phpbb/viewtopic.php?f=8&t=9#p9
+
+Login to DietPi  
+username = root  
+password = dietpi  
+DietPi also comes pre-installed with Dropbear SSH Server.
+
+`ssh root@[IP-OF-YOUR-DIETPI]`  
+password: `dietpi`
+
+automatic apt update & apt upgrade on first logon and reboots
+
+`ssh root@[IP-OF-YOUR-DIETPI]`
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@    WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!     @
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+run: `ssh-keygen -f "/home/buidl/.ssh/known_hosts" -R "dietpi.IP"`
+
+`ssh root@[IP-OF-YOUR-DIETPI]`  
+Ok in the menu  
+"Do you wish to continue with DietPi as a pure minimal image?"  
+Ok  
+Reboots again
+
+`ssh root@[IP-OF-YOUR-DIETPI]`
+Now only the bash prompt opens
+
+`wget https://raw.githubusercontent.com/rootzoll/raspiblitz/master/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh`
+
+see my output: [sdcard_build_output](sdcard_build_output.html)  
+The only fault appears to be with `fail2ban`
+
+ 
+`ssh admin@[IP-OF-YOUR-DROIDBLITZ]`.
+password: raspiblitz
+
+The raspiblitz GUI and setup worked I until I needed to get the blockchain data.
+
+On the attempt to copy the blockchain from the HDD of a Raspiblitz the ODroid did not mount the 2nd HDD properly.
+It appeared as `sdb` and as `sda` after reboot:
+![](after_reboot_with_2nd_HDD.png)
+
+ Copied the blockchain manually on my main computer to the root /bitcoin folder  
+ Reinserted the HDD to the ODroid and booted up
+ 
+ ssh admin@[IP-OF-YOUR-DROIDBLITZ]  
+`./60finishHDD.sh` 
+
+got this output here: [initial_setup_output](initial_setup_output.html)
+and the same when tried again with a rebuilt sdcard.
+
+Stuck here now: 
+```
+Failed to connect to bus: No such file or directory
+1548191939
+LND not ready yet ... waiting another 60 seconds.
+If this takes too long (more then 10min total) --> CTRL+c and report Problem
+```
+
diff --git a/DietPi/sdcard_build_output.html b/DietPi/sdcard_build_output.html
new file mode 100644
index 0000000..c24b815
--- /dev/null
+++ b/DietPi/sdcard_build_output.html
@@ -0,0 +1,948 @@
+
 ────────────────────────────────────────────────
+  DietPi | Tue 22/01/19 - 19:55
+  ────────────────────────────────────────────────
+  v6.19.7 | Odroid XU3/XU4/HC1/HC2 (armv7l)
+  ────────────────────────────────────────────────
+  eth0 | 192.168.1.175
+  ────────────────────────────────────────────────
+  DietPi Team     : Daniel Knight (founder), MichaIng, K-Plan
+  Image           : DietPi Core Team (pre-image: Meveric)
+  Web             : https://DietPi.com | https://twitter.com/dietpi_
+  Patreon Legends : PINE64 community
+  Donate          : https://DietPi.com/#donate
+  DietPi Hosting  : Powered by https://MyVirtualServer.com
+ 
+  dietpi-launcher  = All the DietPi programs in one place.
+  dietpi-config    = Feature rich configuration tool for your device.
+  dietpi-software  = Select optimized software for installation.
+  htop             = Resource monitor.
+  cpu              = Shows CPU information and stats.
+ 
+ root@DietPi:~# wget https://raw.githubusercontent.com/rootzoll/raspiblitz/master/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh
+ --2019-01-22 19:55:38--  https://raw.githubusercontent.com/rootzoll/raspiblitz/master/build.sdcard/raspbianStretchDesktop.sh
+ Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.60.133
+ Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.60.133|:443... connected.
+ HTTP request sent, awaiting response... 200 OK
+ Length: 20808 (20K) [text/plain]
+ Saving to: ‘raspbianStretchDesktop.sh’
+ 
+ raspbianStretchDesktop.sh 100%[====================================>]  20.32K  --.-KB/s    in 0.03s   
+ 
+ 2019-01-22 19:55:39 (607 KB/s) - ‘raspbianStretchDesktop.sh’ saved [20808/20808]
+ 
+ 
+ *****************************************
+ * RASPIBLITZ SD CARD IMAGE SETUP v0.99  *
+ *****************************************
+ 
+ *** CHECK INPUT PARAMETERS ***
+ will use code from branch --> 'master'
+ *** CHECK INPUT PARAMETERS ***
+ will use code from user --> 'rootzoll'
+ 
+ *** CHECK BASE IMAGE ***
+ Check if Linux ARM based ...
+ OK running on Linux ARM architecture.
+ Detect Base Image ...
+ OK running dietpi
+ 
+ *** FIXING LOCALES FOR BUILD ***
+ Generating locales (this might take a while)...
+   en_GB.UTF-8... done
+   en_US.ISO-8859-1... done
+   en_US.UTF-8... done
+ Generation complete.
+ 
+ *** UPDATE DEBIAN ***
+ Hit:1 http://fuzon.co.uk/meveric all InRelease
+ Hit:2 http://fuzon.co.uk/meveric stretch InRelease                                                
+ Hit:3 https://oph.mdrjr.net/meveric all InRelease                                                 
+ Ign:4 https://cdn-aws.deb.debian.org/debian stretch InRelease
+ Hit:5 https://cdn-aws.deb.debian.org/debian stretch-updates InRelease
+ Hit:6 https://cdn-aws.deb.debian.org/debian-security stretch/updates InRelease
+ Hit:7 https://cdn-aws.deb.debian.org/debian stretch-backports InRelease
+ Hit:8 https://cdn-aws.deb.debian.org/debian stretch Release
+ Reading package lists... Done
+ Reading package lists... Done
+ Building dependency tree       
+ Reading state information... Done
+ Calculating upgrade... Done
+ 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+ 
+ *** PREPARE DietPi ***
+ renaming dietpi user ti pi
+ install pip
+ Hit:1 http://fuzon.co.uk/meveric all InRelease                                               
+ Hit:2 http://fuzon.co.uk/meveric stretch InRelease                                                
+ Ign:4 https://cdn-aws.deb.debian.org/debian stretch InRelease                                     
+ Hit:5 https://cdn-aws.deb.debian.org/debian stretch-updates InRelease
+ Hit:6 https://cdn-aws.deb.debian.org/debian-security stretch/updates InRelease
+ Hit:7 https://cdn-aws.deb.debian.org/debian stretch-backports InRelease
+ Hit:8 https://cdn-aws.deb.debian.org/debian stretch Release
+ Hit:3 https://oph.mdrjr.net/meveric all InRelease
+ Reading package lists... Done
+ Reading package lists... Done
+ Building dependency tree       
+ Reading state information... Done
+ Package 'fail2ban' is not installed, so not removed
+ 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+ Reading package lists... Done
+ Building dependency tree       
+ Reading state information... Done
+ The following additional packages will be installed:
+   binutils cpp cpp-6 dpkg-dev g++ g++-6 gcc gcc-6 libasan3 libatomic1 libc-dev-bin libc6-dev libcc1-0
+   libdpkg-perl libgcc-6-dev libgdbm3 libgomp1 libisl15 libmpc3 libmpfr4 libperl5.24 libstdc++-6-dev
+   libubsan0 linux-libc-dev make patch perl perl-modules-5.24 xz-utils
+ Suggested packages:
+   binutils-doc cpp-doc gcc-6-locales debian-keyring gcc-6-doc libstdc++6-6-dbg gcc-multilib
+   manpages-dev autoconf automake libtool flex bison gdb gcc-doc libgcc1-dbg libgomp1-dbg libitm1-dbg
+   libatomic1-dbg libasan3-dbg liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg libmpx2-dbg
+   libquadmath0-dbg glibc-doc libstdc++-6-doc make-doc ed diffutils-doc perl-doc
+   libterm-readline-gnu-perl | libterm-readline-perl-perl
+ Recommended packages:
+   fakeroot libalgorithm-merge-perl manpages manpages-dev libfile-fcntllock-perl netbase rename
+ The following NEW packages will be installed:
+   binutils build-essential cpp cpp-6 dpkg-dev g++ g++-6 gcc gcc-6 libasan3 libatomic1 libc-dev-bin
+   libc6-dev libcc1-0 libdpkg-perl libgcc-6-dev libgdbm3 libgomp1 libisl15 libmpc3 libmpfr4
+   libperl5.24 libstdc++-6-dev libubsan0 linux-libc-dev make patch perl perl-modules-5.24 xz-utils
+ 0 upgraded, 30 newly installed, 0 to remove and 0 not upgraded.
+ Need to get 36.8 MB of archives.
+ After this operation, 138 MB of additional disk space will be used.
+ Get:1 https://cdn-aws.deb.debian.org/debian-security stretch/updates/main armhf perl-modules-5.24 all 5.24.1-3+deb9u5 [2,722 kB]
+ Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libgdbm3 armhf 1.8.3-14 [28.5 kB]
+ Get:3 https://cdn-aws.deb.debian.org/debian-security stretch/updates/main armhf libperl5.24 armhf 5.24.1-3+deb9u5 [2,850 kB]
+ Get:4 https://cdn-aws.deb.debian.org/debian-security stretch/updates/main armhf perl armhf 5.24.1-3+deb9u5 [219 kB]
+ Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf xz-utils armhf 5.2.2-1.2+b1 [263 kB]
+ Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf binutils armhf 2.28-5 [3,900 kB]
+ Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf libc-dev-bin armhf 2.24-11+deb9u3 [253 kB]
+ Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf linux-libc-dev armhf 4.9.130-2 [1,350 kB]
+ Get:9 https://cdn-aws.deb.debian.org/debian stretch/main armhf libc6-dev armhf 2.24-11+deb9u3 [1,995 kB]
+ Get:10 https://cdn-aws.deb.debian.org/debian stretch/main armhf libisl15 armhf 0.18-1 [441 kB]        
+ Get:11 https://cdn-aws.deb.debian.org/debian stretch/main armhf libmpfr4 armhf 3.1.5-1 [536 kB]       
+ Get:12 https://cdn-aws.deb.debian.org/debian stretch/main armhf libmpc3 armhf 1.0.3-1+b2 [32.6 kB]    
+ Get:13 https://cdn-aws.deb.debian.org/debian stretch/main armhf cpp-6 armhf 6.3.0-18+deb9u1 [5,239 kB]
+ Get:14 https://cdn-aws.deb.debian.org/debian stretch/main armhf cpp armhf 4:6.3.0-4 [18.7 kB]         
+ Get:15 https://cdn-aws.deb.debian.org/debian stretch/main armhf libcc1-0 armhf 6.3.0-18+deb9u1 [25.2 kB]
+ Get:16 https://cdn-aws.deb.debian.org/debian stretch/main armhf libgomp1 armhf 6.3.0-18+deb9u1 [64.6 kB]
+ Get:17 https://cdn-aws.deb.debian.org/debian stretch/main armhf libatomic1 armhf 6.3.0-18+deb9u1 [6,010 B]
+ Get:18 https://cdn-aws.deb.debian.org/debian stretch/main armhf libasan3 armhf 6.3.0-18+deb9u1 [284 kB]
+ Get:19 https://cdn-aws.deb.debian.org/debian stretch/main armhf libubsan0 armhf 6.3.0-18+deb9u1 [92.9 kB]
+ Get:20 https://cdn-aws.deb.debian.org/debian stretch/main armhf libgcc-6-dev armhf 6.3.0-18+deb9u1 [531 kB]
+ Get:21 https://cdn-aws.deb.debian.org/debian stretch/main armhf gcc-6 armhf 6.3.0-18+deb9u1 [5,511 kB]
+ Get:22 https://cdn-aws.deb.debian.org/debian stretch/main armhf gcc armhf 4:6.3.0-4 [5,212 B]         
+ Get:23 https://cdn-aws.deb.debian.org/debian stretch/main armhf libstdc++-6-dev armhf 6.3.0-18+deb9u1 [1,487 kB]
+ Get:24 https://cdn-aws.deb.debian.org/debian stretch/main armhf g++-6 armhf 6.3.0-18+deb9u1 [5,665 kB]
+ Get:25 https://cdn-aws.deb.debian.org/debian stretch/main armhf g++ armhf 4:6.3.0-4 [1,520 B]         
+ Get:26 https://cdn-aws.deb.debian.org/debian stretch/main armhf make armhf 4.1-9.1 [290 kB]           
+ Get:27 https://cdn-aws.deb.debian.org/debian stretch/main armhf libdpkg-perl all 1.18.25 [1,287 kB]   
+ Get:28 https://cdn-aws.deb.debian.org/debian stretch/main armhf patch armhf 2.7.5-1+deb9u1 [106 kB]   
+ Get:29 https://cdn-aws.deb.debian.org/debian stretch/main armhf dpkg-dev all 1.18.25 [1,595 kB]       
+ Get:30 https://cdn-aws.deb.debian.org/debian stretch/main armhf build-essential armhf 12.3 [7,342 B]  
+ Fetched 36.8 MB in 25s (1,454 kB/s)                                                                   
+ Selecting previously unselected package perl-modules-5.24.
+ (Reading database ... 14111 files and directories currently installed.)
+ Preparing to unpack .../00-perl-modules-5.24_5.24.1-3+deb9u5_all.deb ...
+ Unpacking perl-modules-5.24 (5.24.1-3+deb9u5) ...
+ Selecting previously unselected package libgdbm3:armhf.
+ Preparing to unpack .../01-libgdbm3_1.8.3-14_armhf.deb ...
+ Unpacking libgdbm3:armhf (1.8.3-14) ...
+ Selecting previously unselected package libperl5.24:armhf.
+ Preparing to unpack .../02-libperl5.24_5.24.1-3+deb9u5_armhf.deb ...
+ Unpacking libperl5.24:armhf (5.24.1-3+deb9u5) ...
+ Selecting previously unselected package perl.
+ Preparing to unpack .../03-perl_5.24.1-3+deb9u5_armhf.deb ...
+ Unpacking perl (5.24.1-3+deb9u5) ...
+ Selecting previously unselected package xz-utils.
+ Preparing to unpack .../04-xz-utils_5.2.2-1.2+b1_armhf.deb ...
+ Unpacking xz-utils (5.2.2-1.2+b1) ...
+ Selecting previously unselected package binutils.
+ Preparing to unpack .../05-binutils_2.28-5_armhf.deb ...
+ Unpacking binutils (2.28-5) ...
+ Selecting previously unselected package libc-dev-bin.
+ Preparing to unpack .../06-libc-dev-bin_2.24-11+deb9u3_armhf.deb ...
+ Unpacking libc-dev-bin (2.24-11+deb9u3) ...
+ Selecting previously unselected package linux-libc-dev:armhf.
+ Preparing to unpack .../07-linux-libc-dev_4.9.130-2_armhf.deb ...
+ Unpacking linux-libc-dev:armhf (4.9.130-2) ...
+ Selecting previously unselected package libc6-dev:armhf.
+ Preparing to unpack .../08-libc6-dev_2.24-11+deb9u3_armhf.deb ...
+ Unpacking libc6-dev:armhf (2.24-11+deb9u3) ...
+ Selecting previously unselected package libisl15:armhf.
+ Preparing to unpack .../09-libisl15_0.18-1_armhf.deb ...
+ Unpacking libisl15:armhf (0.18-1) ...
+ Selecting previously unselected package libmpfr4:armhf.
+ Preparing to unpack .../10-libmpfr4_3.1.5-1_armhf.deb ...
+ Unpacking libmpfr4:armhf (3.1.5-1) ...
+ Selecting previously unselected package libmpc3:armhf.
+ Preparing to unpack .../11-libmpc3_1.0.3-1+b2_armhf.deb ...
+ Unpacking libmpc3:armhf (1.0.3-1+b2) ...
+ Selecting previously unselected package cpp-6.
+ Preparing to unpack .../12-cpp-6_6.3.0-18+deb9u1_armhf.deb ...
+ Unpacking cpp-6 (6.3.0-18+deb9u1) ...
+ Selecting previously unselected package cpp.
+ Preparing to unpack .../13-cpp_4%3a6.3.0-4_armhf.deb ...
+ Unpacking cpp (4:6.3.0-4) ...
+ Selecting previously unselected package libcc1-0:armhf.
+ Preparing to unpack .../14-libcc1-0_6.3.0-18+deb9u1_armhf.deb ...
+ Unpacking libcc1-0:armhf (6.3.0-18+deb9u1) ...
+ Selecting previously unselected package libgomp1:armhf.
+ Preparing to unpack .../15-libgomp1_6.3.0-18+deb9u1_armhf.deb ...
+ Unpacking libgomp1:armhf (6.3.0-18+deb9u1) ...
+ Selecting previously unselected package libatomic1:armhf.
+ Preparing to unpack .../16-libatomic1_6.3.0-18+deb9u1_armhf.deb ...
+ Unpacking libatomic1:armhf (6.3.0-18+deb9u1) ...
+ Selecting previously unselected package libasan3:armhf.
+ Preparing to unpack .../17-libasan3_6.3.0-18+deb9u1_armhf.deb ...
+ Unpacking libasan3:armhf (6.3.0-18+deb9u1) ...
+ Selecting previously unselected package libubsan0:armhf.
+ Preparing to unpack .../18-libubsan0_6.3.0-18+deb9u1_armhf.deb ...
+ Unpacking libubsan0:armhf (6.3.0-18+deb9u1) ...
+ Selecting previously unselected package libgcc-6-dev:armhf.
+ Preparing to unpack .../19-libgcc-6-dev_6.3.0-18+deb9u1_armhf.deb ...
+ Unpacking libgcc-6-dev:armhf (6.3.0-18+deb9u1) ...
+ Selecting previously unselected package gcc-6.
+ Preparing to unpack .../20-gcc-6_6.3.0-18+deb9u1_armhf.deb ...
+ Unpacking gcc-6 (6.3.0-18+deb9u1) ...
+ Selecting previously unselected package gcc.
+ Preparing to unpack .../21-gcc_4%3a6.3.0-4_armhf.deb ...
+ Unpacking gcc (4:6.3.0-4) ...
+ Selecting previously unselected package libstdc++-6-dev:armhf.
+ Preparing to unpack .../22-libstdc++-6-dev_6.3.0-18+deb9u1_armhf.deb ...
+ Unpacking libstdc++-6-dev:armhf (6.3.0-18+deb9u1) ...
+ Selecting previously unselected package g++-6.
+ Preparing to unpack .../23-g++-6_6.3.0-18+deb9u1_armhf.deb ...
+ Unpacking g++-6 (6.3.0-18+deb9u1) ...
+ Selecting previously unselected package g++.
+ Preparing to unpack .../24-g++_4%3a6.3.0-4_armhf.deb ...
+ Unpacking g++ (4:6.3.0-4) ...
+ Selecting previously unselected package make.
+ Preparing to unpack .../25-make_4.1-9.1_armhf.deb ...
+ Unpacking make (4.1-9.1) ...
+ Selecting previously unselected package libdpkg-perl.
+ Preparing to unpack .../26-libdpkg-perl_1.18.25_all.deb ...
+ Unpacking libdpkg-perl (1.18.25) ...
+ Selecting previously unselected package patch.
+ Preparing to unpack .../27-patch_2.7.5-1+deb9u1_armhf.deb ...
+ Unpacking patch (2.7.5-1+deb9u1) ...
+ Selecting previously unselected package dpkg-dev.
+ Preparing to unpack .../28-dpkg-dev_1.18.25_all.deb ...
+ Unpacking dpkg-dev (1.18.25) ...
+ Selecting previously unselected package build-essential.
+ Preparing to unpack .../29-build-essential_12.3_armhf.deb ...
+ Unpacking build-essential (12.3) ...
+ Setting up libgomp1:armhf (6.3.0-18+deb9u1) ...
+ Setting up libatomic1:armhf (6.3.0-18+deb9u1) ...
+ Setting up perl-modules-5.24 (5.24.1-3+deb9u5) ...
+ Setting up libgdbm3:armhf (1.8.3-14) ...
+ Setting up libperl5.24:armhf (5.24.1-3+deb9u5) ...
+ Setting up libcc1-0:armhf (6.3.0-18+deb9u1) ...
+ Setting up make (4.1-9.1) ...
+ Setting up libasan3:armhf (6.3.0-18+deb9u1) ...
+ Setting up libubsan0:armhf (6.3.0-18+deb9u1) ...
+ Setting up linux-libc-dev:armhf (4.9.130-2) ...
+ Setting up perl (5.24.1-3+deb9u5) ...
+ update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode
+ Setting up libisl15:armhf (0.18-1) ...
+ Setting up patch (2.7.5-1+deb9u1) ...
+ Processing triggers for libc-bin (2.24-11+deb9u3) ...
+ Setting up xz-utils (5.2.2-1.2+b1) ...
+ update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
+ Setting up libmpfr4:armhf (3.1.5-1) ...
+ Setting up libmpc3:armhf (1.0.3-1+b2) ...
+ Setting up binutils (2.28-5) ...
+ Setting up cpp-6 (6.3.0-18+deb9u1) ...
+ Setting up libc-dev-bin (2.24-11+deb9u3) ...
+ Setting up libc6-dev:armhf (2.24-11+deb9u3) ...
+ Setting up cpp (4:6.3.0-4) ...
+ Setting up libgcc-6-dev:armhf (6.3.0-18+deb9u1) ...
+ Setting up libstdc++-6-dev:armhf (6.3.0-18+deb9u1) ...
+ Setting up libdpkg-perl (1.18.25) ...
+ Setting up gcc-6 (6.3.0-18+deb9u1) ...
+ Setting up g++-6 (6.3.0-18+deb9u1) ...
+ Setting up dpkg-dev (1.18.25) ...
+ Setting up gcc (4:6.3.0-4) ...
+ Setting up g++ (4:6.3.0-4) ...
+ update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
+ Setting up build-essential (12.3) ...
+ Processing triggers for libc-bin (2.24-11+deb9u3) ...
+ raspbianStretchDesktop.sh: line 101: sudp: command not found
+ 
+ *** CONFIG ***
+ sudo: raspi-config: command not found
+ bash: /etc/systemd/system/getty@tty1.service.d/autologin.conf: No such file or directory
+ bash: /etc/systemd/system/getty@tty1.service.d/autologin.conf: No such file or directory
+ bash: /etc/systemd/system/getty@tty1.service.d/autologin.conf: No such file or directory
+ 
+ *** SOFTWARE UPDATE ***
+ Reading package lists... Done
+ Building dependency tree       
+ Reading state information... Done
+ bash-completion is already the newest version (1:2.1-4.3).
+ curl is already the newest version (7.52.1-5+deb9u8).
+ htop is already the newest version (2.0.2-1).
+ The following additional packages will be installed:
+   dc git-man liberror-perl libexpat1 libjq1 libonig4
+ Suggested packages:
+   gettext-base git-daemon-run | git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb
+   git-arch git-cvs git-mediawiki git-svn
+ Recommended packages:
+   less rsync ssh-client
+ The following NEW packages will be installed:
+   dc dphys-swapfile git git-man jq liberror-perl libexpat1 libjq1 libonig4
+ 0 upgraded, 9 newly installed, 0 to remove and 0 not upgraded.
+ Need to get 5,578 kB of archives.
+ After this operation, 23.7 MB of additional disk space will be used.
+ Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libexpat1 armhf 2.2.0-2+deb9u1 [64.4 kB]
+ Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf liberror-perl all 0.17024-1 [26.9 kB]
+ Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf git-man all 1:2.11.0-3+deb9u4 [1,433 kB]
+ Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf git armhf 1:2.11.0-3+deb9u4 [3,661 kB]
+ Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf dc armhf 1.06.95-9+b3 [64.8 kB]
+ Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf dphys-swapfile all 20100506-3 [19.7 kB]
+ Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf libonig4 armhf 6.1.3-2 [128 kB]
+ Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf libjq1 armhf 1.5+dfsg-1.3 [122 kB]
+ Get:9 https://cdn-aws.deb.debian.org/debian stretch/main armhf jq armhf 1.5+dfsg-1.3 [59.2 kB]
+ Fetched 5,578 kB in 4s (1,204 kB/s)
+ Selecting previously unselected package libexpat1:armhf.
+ (Reading database ... 18920 files and directories currently installed.)
+ Preparing to unpack .../0-libexpat1_2.2.0-2+deb9u1_armhf.deb ...
+ Unpacking libexpat1:armhf (2.2.0-2+deb9u1) ...
+ Selecting previously unselected package liberror-perl.
+ Preparing to unpack .../1-liberror-perl_0.17024-1_all.deb ...
+ Unpacking liberror-perl (0.17024-1) ...
+ Selecting previously unselected package git-man.
+ Preparing to unpack .../2-git-man_1%3a2.11.0-3+deb9u4_all.deb ...
+ Unpacking git-man (1:2.11.0-3+deb9u4) ...
+ Selecting previously unselected package git.
+ Preparing to unpack .../3-git_1%3a2.11.0-3+deb9u4_armhf.deb ...
+ Unpacking git (1:2.11.0-3+deb9u4) ...
+ Selecting previously unselected package dc.
+ Preparing to unpack .../4-dc_1.06.95-9+b3_armhf.deb ...
+ Unpacking dc (1.06.95-9+b3) ...
+ Selecting previously unselected package dphys-swapfile.
+ Preparing to unpack .../5-dphys-swapfile_20100506-3_all.deb ...
+ Unpacking dphys-swapfile (20100506-3) ...
+ Selecting previously unselected package libonig4:armhf.
+ Preparing to unpack .../6-libonig4_6.1.3-2_armhf.deb ...
+ Unpacking libonig4:armhf (6.1.3-2) ...
+ Selecting previously unselected package libjq1:armhf.
+ Preparing to unpack .../7-libjq1_1.5+dfsg-1.3_armhf.deb ...
+ Unpacking libjq1:armhf (1.5+dfsg-1.3) ...
+ Selecting previously unselected package jq.
+ Preparing to unpack .../8-jq_1.5+dfsg-1.3_armhf.deb ...
+ Unpacking jq (1.5+dfsg-1.3) ...
+ Setting up git-man (1:2.11.0-3+deb9u4) ...
+ Setting up libexpat1:armhf (2.2.0-2+deb9u1) ...
+ Setting up liberror-perl (0.17024-1) ...
+ Setting up libonig4:armhf (6.1.3-2) ...
+ Setting up libjq1:armhf (1.5+dfsg-1.3) ...
+ Processing triggers for libc-bin (2.24-11+deb9u3) ...
+ Setting up dc (1.06.95-9+b3) ...
+ Processing triggers for systemd (232-25+deb9u8) ...
+ Setting up git (1:2.11.0-3+deb9u4) ...
+ Setting up jq (1.5+dfsg-1.3) ...
+ Setting up dphys-swapfile (20100506-3) ...
+ Processing triggers for systemd (232-25+deb9u8) ...
+ Reading package lists... Done
+ Building dependency tree       
+ Reading state information... Done
+ Suggested packages:
+   vnstati
+ The following NEW packages will be installed:
+   vnstat
+ 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
+ Need to get 78.6 kB of archives.
+ After this operation, 206 kB of additional disk space will be used.
+ Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf vnstat armhf 1.15-2 [78.6 kB]
+ Fetched 78.6 kB in 1s (54.2 kB/s)
+ Selecting previously unselected package vnstat.
+ (Reading database ... 19853 files and directories currently installed.)
+ Preparing to unpack .../vnstat_1.15-2_armhf.deb ...
+ Unpacking vnstat (1.15-2) ...
+ Setting up vnstat (1.15-2) ...
+ Created symlink /etc/systemd/system/multi-user.target.wants/vnstat.service → /lib/systemd/system/vnstat.service.
+ Processing triggers for systemd (232-25+deb9u8) ...
+ 
+ *** ADDING MAIN USER admin ***
+ Adding user `admin' ...
+ Adding new group `admin' (1001) ...
+ Adding new user `admin' (1001) with group `admin' ...
+ Creating home directory `/home/admin' ...
+ Copying files from `/etc/skel' ...
+ Adding user `admin' to group `sudo' ...
+ Adding user admin to group sudo
+ Done.
+ %sudo ALL=(ALL) NOPASSWD:ALL
+ *** ADDING SERVICE USER bitcoin
+ Adding user `bitcoin' ...
+ Adding new group `bitcoin' (1002) ...
+ Adding new user `bitcoin' (1002) with group `bitcoin' ...
+ Creating home directory `/home/bitcoin' ...
+ Copying files from `/etc/skel' ...
+ 
+ *** SWAP FILE ***
+ 
+ *** INCREASE OPEN FILE LIMIT ***
+ 
+ *** BITCOIN ***
+ --2019-01-22 19:57:16--  https://bitcoin.org/bin/bitcoin-core-0.17.0.1/bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz
+ Resolving bitcoin.org (bitcoin.org)... 138.68.248.245
+ Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected.
+ HTTP request sent, awaiting response... 200 OK
+ Length: 24306145 (23M) [application/octet-stream]
+ Saving to: ‘bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz’
+ 
+ bitcoin-0.17.0.1-arm-linu 100%[====================================>]  23.18M   213KB/s    in 1m 59s  
+ 
+ 2019-01-22 19:59:17 (200 KB/s) - ‘bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz’ saved [24306145/24306145]
+ 
+ --2019-01-22 19:59:17--  https://bitcoin.org/laanwj-releases.asc
+ Resolving bitcoin.org (bitcoin.org)... 138.68.248.245
+ Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected.
+ HTTP request sent, awaiting response... 200 OK
+ Length: 17940 (18K) [application/octet-stream]
+ Saving to: ‘laanwj-releases.asc’
+ 
+ laanwj-releases.asc       100%[====================================>]  17.52K  --.-KB/s    in 0.009s  
+ 
+ 2019-01-22 19:59:18 (1.83 MB/s) - ‘laanwj-releases.asc’ saved [17940/17940]
+ 
+ key 90C8019E36C2E964:
+ 25 signatures not checked due to missing keys
+ gpg: /root/.gnupg/trustdb.gpg: trustdb created
+ gpg: key 90C8019E36C2E964: public key "Wladimir J. van der Laan (Bitcoin Core binary release signing key) <laanwj@gmail.com>" imported
+ gpg: Total number processed: 1
+ gpg:               imported: 1
+ gpg: no ultimately trusted keys found
+ --2019-01-22 19:59:19--  https://bitcoin.org/bin/bitcoin-core-0.17.0.1/SHA256SUMS.asc
+ Resolving bitcoin.org (bitcoin.org)... 138.68.248.245
+ Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected.
+ HTTP request sent, awaiting response... 200 OK
+ Length: 1979 (1.9K) [application/octet-stream]
+ Saving to: ‘SHA256SUMS.asc’
+ 
+ SHA256SUMS.asc            100%[====================================>]   1.93K  --.-KB/s    in 0s      
+ 
+ 2019-01-22 19:59:20 (25.4 MB/s) - ‘SHA256SUMS.asc’ saved [1979/1979]
+ 
+ goodSignature(1)
+ correctKey(1)
+ bitcoin-0.17.0/
+ bitcoin-0.17.0/bin/
+ bitcoin-0.17.0/bin/bitcoin-cli
+ bitcoin-0.17.0/bin/bitcoind
+ bitcoin-0.17.0/bin/bitcoin-qt
+ bitcoin-0.17.0/bin/bitcoin-tx
+ bitcoin-0.17.0/bin/test_bitcoin
+ bitcoin-0.17.0/include/
+ bitcoin-0.17.0/include/bitcoinconsensus.h
+ bitcoin-0.17.0/lib/
+ bitcoin-0.17.0/lib/libbitcoinconsensus.so
+ bitcoin-0.17.0/lib/libbitcoinconsensus.so.0
+ bitcoin-0.17.0/lib/libbitcoinconsensus.so.0.0.0
+ bitcoin-0.17.0/share/
+ bitcoin-0.17.0/share/man/
+ bitcoin-0.17.0/share/man/man1/
+ bitcoin-0.17.0/share/man/man1/bitcoin-cli.1
+ bitcoin-0.17.0/share/man/man1/bitcoind.1
+ bitcoin-0.17.0/share/man/man1/bitcoin-qt.1
+ bitcoin-0.17.0/share/man/man1/bitcoin-tx.1
+ 
+ *** LITECOIN ***
+ --2019-01-22 19:59:24--  https://download.litecoin.org/litecoin-0.16.3/linux/litecoin-0.16.3-arm-linux-gnueabihf.tar.gz
+ Resolving download.litecoin.org (download.litecoin.org)... 104.27.4.55, 104.27.5.55
+ Connecting to download.litecoin.org (download.litecoin.org)|104.27.4.55|:443... connected.
+ HTTP request sent, awaiting response... 200 OK
+ Length: 9568024 (9.1M) [application/octet-stream]
+ Saving to: ‘litecoin-0.16.3-arm-linux-gnueabihf.tar.gz’
+ 
+ litecoin-0.16.3-arm-linux 100%[====================================>]   9.12M  1.66MB/s    in 5.7s    
+ 
+ 2019-01-22 19:59:31 (1.60 MB/s) - ‘litecoin-0.16.3-arm-linux-gnueabihf.tar.gz’ saved [9568024/9568024]
+ 
+ litecoin-0.16.3/
+ litecoin-0.16.3/bin/
+ litecoin-0.16.3/bin/litecoin-cli
+ litecoin-0.16.3/bin/litecoind
+ litecoin-0.16.3/bin/litecoin-tx
+ litecoin-0.16.3/bin/test_litecoin
+ litecoin-0.16.3/share/
+ litecoin-0.16.3/share/man/
+ litecoin-0.16.3/share/man/man1/
+ litecoin-0.16.3/share/man/man1/litecoin-cli.1
+ litecoin-0.16.3/share/man/man1/litecoind.1
+ litecoin-0.16.3/share/man/man1/litecoin-tx.1
+ 
+ *** LND ***
+ --2019-01-22 19:59:32--  https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/lnd-linux-armv7-v0.5.1-beta.tar.gz
+ Resolving github.com (github.com)... 140.82.118.4, 140.82.118.3
+ Connecting to github.com (github.com)|140.82.118.4|:443... connected.
+ HTTP request sent, awaiting response... 302 Found
+ Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fd08b500-f311-11e8-8398-419cca1df903?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190122%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190122T195932Z&X-Amz-Expires=300&X-Amz-Signature=6f7c14b21be2d0d6256c8c26ffac90d638ee148fdd9fdc82fb44b4b0b0757f3e&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlnd-linux-armv7-v0.5.1-beta.tar.gz&response-content-type=application%2Foctet-stream [following]
+ --2019-01-22 19:59:32--  https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fd08b500-f311-11e8-8398-419cca1df903?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190122%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190122T195932Z&X-Amz-Expires=300&X-Amz-Signature=6f7c14b21be2d0d6256c8c26ffac90d638ee148fdd9fdc82fb44b4b0b0757f3e&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlnd-linux-armv7-v0.5.1-beta.tar.gz&response-content-type=application%2Foctet-stream
+ Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.99.43
+ Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.99.43|:443... connected.
+ HTTP request sent, awaiting response... 200 OK
+ Length: 19198203 (18M) [application/octet-stream]
+ Saving to: ‘lnd-linux-armv7-v0.5.1-beta.tar.gz’
+ 
+ lnd-linux-armv7-v0.5.1-be 100%[====================================>]  18.31M  1.12MB/s    in 16s     
+ 
+ 2019-01-22 19:59:49 (1.13 MB/s) - ‘lnd-linux-armv7-v0.5.1-beta.tar.gz’ saved [19198203/19198203]
+ 
+ --2019-01-22 19:59:49--  https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/manifest-v0.5.1-beta.txt
+ Resolving github.com (github.com)... 140.82.118.3, 140.82.118.4
+ Connecting to github.com (github.com)|140.82.118.3|:443... connected.
+ HTTP request sent, awaiting response... 302 Found
+ Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-9178-5d26551a454e?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190122%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190122T195950Z&X-Amz-Expires=300&X-Amz-Signature=37b2d2ed4f06560b5276c8437803f8abfb33af46a8c3aad25aa3376e0186d193&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt&response-content-type=application%2Foctet-stream [following]
+ --2019-01-22 19:59:50--  https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-9178-5d26551a454e?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190122%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190122T195950Z&X-Amz-Expires=300&X-Amz-Signature=37b2d2ed4f06560b5276c8437803f8abfb33af46a8c3aad25aa3376e0186d193&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt&response-content-type=application%2Foctet-stream
+ Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.177.171
+ Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.177.171|:443... connected.
+ HTTP request sent, awaiting response... 200 OK
+ Length: 2026 (2.0K) [application/octet-stream]
+ Saving to: ‘manifest-v0.5.1-beta.txt’
+ 
+ manifest-v0.5.1-beta.txt  100%[====================================>]   1.98K  --.-KB/s    in 0.002s  
+ 
+ 2019-01-22 19:59:50 (1.25 MB/s) - ‘manifest-v0.5.1-beta.txt’ saved [2026/2026]
+ 
+ --2019-01-22 19:59:50--  https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/manifest-v0.5.1-beta.txt.sig
+ Resolving github.com (github.com)... 140.82.118.4, 140.82.118.3
+ Connecting to github.com (github.com)|140.82.118.4|:443... connected.
+ HTTP request sent, awaiting response... 302 Found
+ Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-8fb5-c3aa7d97cb88?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190122%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190122T195951Z&X-Amz-Expires=300&X-Amz-Signature=430c2fad5705494d21da485ee72cd7432961dfee9b4befad8220ac4c4c68adf7&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt.sig&response-content-type=application%2Foctet-stream [following]
+ --2019-01-22 19:59:51--  https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-8fb5-c3aa7d97cb88?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190122%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190122T195951Z&X-Amz-Expires=300&X-Amz-Signature=430c2fad5705494d21da485ee72cd7432961dfee9b4befad8220ac4c4c68adf7&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt.sig&response-content-type=application%2Foctet-stream
+ Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.177.171
+ Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.177.171|:443... connected.
+ HTTP request sent, awaiting response... 200 OK
+ Length: 566 [application/octet-stream]
+ Saving to: ‘manifest-v0.5.1-beta.txt.sig’
+ 
+ manifest-v0.5.1-beta.txt. 100%[====================================>]     566  --.-KB/s    in 0s      
+ 
+ 2019-01-22 19:59:51 (6.13 MB/s) - ‘manifest-v0.5.1-beta.txt.sig’ saved [566/566]
+ 
+ --2019-01-22 19:59:51--  https://keybase.io/roasbeef/pgp_keys.asc
+ Resolving keybase.io (keybase.io)... 52.55.1.130, 52.6.136.121
+ Connecting to keybase.io (keybase.io)|52.55.1.130|:443... connected.
+ HTTP request sent, awaiting response... 200 OK
+ Length: 6909 (6.7K) [text/plain]
+ Saving to: ‘pgp_keys.asc’
+ 
+ pgp_keys.asc              100%[====================================>]   6.75K  --.-KB/s    in 0s      
+ 
+ 2019-01-22 19:59:52 (83.5 MB/s) - ‘pgp_keys.asc’ saved [6909/6909]
+ 
+ gpg: key 8B80CD2BB8BD8132: public key "Olaoluwa Osuntokun <laolu32@gmail.com>" imported
+ gpg: Total number processed: 1
+ gpg:               imported: 1
+ goodSignature(1)
+ correctKey(1)
+ *** Installing Go ***
+ --2019-01-22 19:59:59--  https://storage.googleapis.com/golang/go1.11.linux-armv6l.tar.gz
+ Resolving storage.googleapis.com (storage.googleapis.com)... 216.58.204.48, 2a00:1450:4009:808::2010
+ Connecting to storage.googleapis.com (storage.googleapis.com)|216.58.204.48|:443... connected.
+ HTTP request sent, awaiting response... 200 OK
+ Length: 101718267 (97M) [application/octet-stream]
+ Saving to: ‘go1.11.linux-armv6l.tar.gz’
+ 
+ go1.11.linux-armv6l.tar.g 100%[====================================>]  97.01M  1.55MB/s    in 64s     
+ 
+ 2019-01-22 20:01:04 (1.51 MB/s) - ‘go1.11.linux-armv6l.tar.gz’ saved [101718267/101718267]
+ 
+ 
+ 
+ *** RASPIBLITZ EXTRAS ***
+ Reading package lists... Done
+ Building dependency tree       
+ Reading state information... Done
+ bc is already the newest version (1.06.95-9+b3).
+ The following NEW packages will be installed:
+   dialog
+ 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
+ Need to get 240 kB of archives.
+ After this operation, 883 kB of additional disk space will be used.
+ Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf dialog armhf 1.3-20160828-2 [240 kB]
+ Fetched 240 kB in 1s (214 kB/s)
+ Selecting previously unselected package dialog.
+ (Reading database ... 19868 files and directories currently installed.)
+ Preparing to unpack .../dialog_1.3-20160828-2_armhf.deb ...
+ Unpacking dialog (1.3-20160828-2) ...
+ Setting up dialog (1.3-20160828-2) ...
+ Reading package lists... Done
+ Building dependency tree       
+ Reading state information... Done
+ The following additional packages will be installed:
+   fuse libfuse2
+ Recommended packages:
+   exfat-utils
+ The following NEW packages will be installed:
+   exfat-fuse fuse libfuse2
+ 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
+ Need to get 214 kB of archives.
+ After this operation, 426 kB of additional disk space will be used.
+ Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libfuse2 armhf 2.9.7-1+deb9u2 [116 kB]
+ Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf fuse armhf 2.9.7-1+deb9u2 [70.3 kB]
+ Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf exfat-fuse armhf 1.2.5-2 [27.6 kB]
+ Fetched 214 kB in 1s (158 kB/s)  
+ Selecting previously unselected package libfuse2:armhf.
+ (Reading database ... 20026 files and directories currently installed.)
+ Preparing to unpack .../libfuse2_2.9.7-1+deb9u2_armhf.deb ...
+ Unpacking libfuse2:armhf (2.9.7-1+deb9u2) ...
+ Selecting previously unselected package fuse.
+ Preparing to unpack .../fuse_2.9.7-1+deb9u2_armhf.deb ...
+ Unpacking fuse (2.9.7-1+deb9u2) ...
+ Selecting previously unselected package exfat-fuse.
+ Preparing to unpack .../exfat-fuse_1.2.5-2_armhf.deb ...
+ Unpacking exfat-fuse (1.2.5-2) ...
+ Setting up libfuse2:armhf (2.9.7-1+deb9u2) ...
+ Processing triggers for libc-bin (2.24-11+deb9u3) ...
+ Setting up fuse (2.9.7-1+deb9u2) ...
+ update-initramfs: deferring update (trigger activated)
+ Setting up exfat-fuse (1.2.5-2) ...
+ Processing triggers for initramfs-tools (0.130) ...
+ ln: failed to create hard link '/boot/initrd.img-4.14.66+.dpkg-bak' => '/boot/initrd.img-4.14.66+': Operation not permitted
+ update-initramfs: Generating /boot/initrd.img-4.14.66+
+ Image Name:   uInitrd
+ Created:      Tue Jan 22 20:01:28 2019
+ Image Type:   ARM Linux RAMDisk Image (uncompressed)
+ Data Size:    5715824 Bytes = 5581.86 kB = 5.45 MB
+ Load Address: 00000000
+ Entry Point:  00000000
+ Reading package lists... Done
+ Building dependency tree       
+ Reading state information... Done
+ The following additional packages will be installed:
+   libevent-2.0-5 libminiupnpc10 libnatpmp1 transmission-common
+ Suggested packages:
+   minissdpd natpmp-utils transmission-daemon transmission-gtk
+ Recommended packages:
+   minissdpd
+ The following NEW packages will be installed:
+   libevent-2.0-5 libminiupnpc10 libnatpmp1 transmission-cli transmission-common
+ 0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
+ Need to get 776 kB of archives.
+ After this operation, 2,814 kB of additional disk space will be used.
+ Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libevent-2.0-5 armhf 2.0.21-stable-3 [134 kB]
+ Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libminiupnpc10 armhf 1.9.20140610-4 [25.7 kB]
+ Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf libnatpmp1 armhf 20110808-4+b1 [8,338 B]
+ Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf transmission-common all 2.92-2+deb9u1 [288 kB]
+ Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf transmission-cli armhf 2.92-2+deb9u1 [320 kB]
+ Fetched 776 kB in 1s (502 kB/s)       
+ Selecting previously unselected package libevent-2.0-5:armhf.
+ (Reading database ... 20061 files and directories currently installed.)
+ Preparing to unpack .../libevent-2.0-5_2.0.21-stable-3_armhf.deb ...
+ Unpacking libevent-2.0-5:armhf (2.0.21-stable-3) ...
+ Selecting previously unselected package libminiupnpc10:armhf.
+ Preparing to unpack .../libminiupnpc10_1.9.20140610-4_armhf.deb ...
+ Unpacking libminiupnpc10:armhf (1.9.20140610-4) ...
+ Selecting previously unselected package libnatpmp1:armhf.
+ Preparing to unpack .../libnatpmp1_20110808-4+b1_armhf.deb ...
+ Unpacking libnatpmp1:armhf (20110808-4+b1) ...
+ Selecting previously unselected package transmission-common.
+ Preparing to unpack .../transmission-common_2.92-2+deb9u1_all.deb ...
+ Unpacking transmission-common (2.92-2+deb9u1) ...
+ Selecting previously unselected package transmission-cli.
+ Preparing to unpack .../transmission-cli_2.92-2+deb9u1_armhf.deb ...
+ Unpacking transmission-cli (2.92-2+deb9u1) ...
+ Setting up libminiupnpc10:armhf (1.9.20140610-4) ...
+ Setting up libnatpmp1:armhf (20110808-4+b1) ...
+ Setting up transmission-common (2.92-2+deb9u1) ...
+ Processing triggers for libc-bin (2.24-11+deb9u3) ...
+ Setting up libevent-2.0-5:armhf (2.0.21-stable-3) ...
+ Setting up transmission-cli (2.92-2+deb9u1) ...
+ Processing triggers for libc-bin (2.24-11+deb9u3) ...
+ Reading package lists... Done
+ Building dependency tree       
+ Reading state information... Done
+ The following additional packages will be installed:
+   libtorrent19 libxmlrpc-core-c3
+ Suggested packages:
+   screen | dtach
+ The following NEW packages will be installed:
+   libtorrent19 libxmlrpc-core-c3 rtorrent
+ 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
+ Need to get 891 kB of archives.
+ After this operation, 2,281 kB of additional disk space will be used.
+ Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libxmlrpc-core-c3 armhf 1.33.14-4 [128 kB]
+ Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libtorrent19 armhf 0.13.6-1.1 [345 kB]
+ Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf rtorrent armhf 0.9.6-2+b1 [418 kB]
+ Fetched 891 kB in 2s (439 kB/s)
+ Selecting previously unselected package libxmlrpc-core-c3.
+ (Reading database ... 20202 files and directories currently installed.)
+ Preparing to unpack .../libxmlrpc-core-c3_1.33.14-4_armhf.deb ...
+ Unpacking libxmlrpc-core-c3 (1.33.14-4) ...
+ Selecting previously unselected package libtorrent19:armhf.
+ Preparing to unpack .../libtorrent19_0.13.6-1.1_armhf.deb ...
+ Unpacking libtorrent19:armhf (0.13.6-1.1) ...
+ Selecting previously unselected package rtorrent.
+ Preparing to unpack .../rtorrent_0.9.6-2+b1_armhf.deb ...
+ Unpacking rtorrent (0.9.6-2+b1) ...
+ Setting up libtorrent19:armhf (0.13.6-1.1) ...
+ Setting up libxmlrpc-core-c3 (1.33.14-4) ...
+ Setting up rtorrent (0.9.6-2+b1) ...
+ Processing triggers for libc-bin (2.24-11+deb9u3) ...
+ Reading package lists... Done
+ Building dependency tree       
+ Reading state information... Done
+ Suggested packages:
+   byobu | screenie | iselect ncurses-term
+ The following NEW packages will be installed:
+   screen
+ 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
+ Need to get 568 kB of archives.
+ After this operation, 860 kB of additional disk space will be used.
+ Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf screen armhf 4.5.0-6 [568 kB]
+ Fetched 568 kB in 2s (245 kB/s)
+ Selecting previously unselected package screen.
+ (Reading database ... 20239 files and directories currently installed.)
+ Preparing to unpack .../screen_4.5.0-6_armhf.deb ...
+ Unpacking screen (4.5.0-6) ...
+ Processing triggers for systemd (232-25+deb9u8) ...
+ Setting up screen (4.5.0-6) ...
+ Processing triggers for systemd (232-25+deb9u8) ...
+ Cloning into 'raspiblitz'...
+ remote: Enumerating objects: 131, done.
+ remote: Counting objects: 100% (131/131), done.
+ remote: Compressing objects: 100% (87/87), done.
+ remote: Total 4672 (delta 83), reused 85 (delta 44), pack-reused 4541
+ Receiving objects: 100% (4672/4672), 16.36 MiB | 1.24 MiB/s, done.
+ Resolving deltas: 100% (3286/3286), done.
+ cp: -r not specified; omitting directory '/home/admin/raspiblitz/home.admin/config.scripts'
+ bash: /home/pi/.bashrc: No such file or directory
+ bash: /home/pi/.bashrc: No such file or directory
+ bash: /home/pi/.bashrc: No such file or directory
+ bash: /home/pi/.bashrc: No such file or directory
+ 
+ *** HARDENING ***
+ Reading package lists... Done
+ Building dependency tree       
+ Reading state information... Done
+ The following additional packages will be installed:
+   dh-python libmpdec2 libpython3-stdlib libpython3.5-minimal libpython3.5-stdlib mime-support python3
+   python3-minimal python3.5 python3.5-minimal
+ Suggested packages:
+   mailx system-log-daemon monit python3-doc python3-tk python3-venv python3.5-venv python3.5-doc
+   binfmt-support
+ Recommended packages:
+   python iptables whois python3-pyinotify python3-systemd file
+ The following NEW packages will be installed:
+   dh-python fail2ban libmpdec2 libpython3-stdlib libpython3.5-minimal libpython3.5-stdlib
+   mime-support python3 python3-minimal python3.5 python3.5-minimal
+ 0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded.
+ Need to get 4,876 kB of archives.
+ After this operation, 22.6 MB of additional disk space will be used.
+ Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython3.5-minimal armhf 3.5.3-1+deb9u1 [565 kB]
+ Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf python3.5-minimal armhf 3.5.3-1+deb9u1 [1,441 kB]
+ Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf python3-minimal armhf 3.5.3-1 [35.3 kB]
+ Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf mime-support all 3.60 [36.7 kB]
+ Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf libmpdec2 armhf 2.4.2-1 [69.6 kB]
+ Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython3.5-stdlib armhf 3.5.3-1+deb9u1 [2,085 kB]
+ Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf python3.5 armhf 3.5.3-1+deb9u1 [229 kB]
+ Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython3-stdlib armhf 3.5.3-1 [18.6 kB]
+ Get:9 https://cdn-aws.deb.debian.org/debian stretch/main armhf dh-python all 2.20170125 [86.8 kB]
+ Get:10 https://cdn-aws.deb.debian.org/debian stretch/main armhf python3 armhf 3.5.3-1 [21.6 kB]
+ Get:11 https://cdn-aws.deb.debian.org/debian stretch/main armhf fail2ban all 0.9.6-2 [288 kB]
+ Fetched 4,876 kB in 4s (1,079 kB/s)
+ Selecting previously unselected package libpython3.5-minimal:armhf.
+ (Reading database ... 20299 files and directories currently installed.)
+ Preparing to unpack .../0-libpython3.5-minimal_3.5.3-1+deb9u1_armhf.deb ...
+ Unpacking libpython3.5-minimal:armhf (3.5.3-1+deb9u1) ...
+ Selecting previously unselected package python3.5-minimal.
+ Preparing to unpack .../1-python3.5-minimal_3.5.3-1+deb9u1_armhf.deb ...
+ Unpacking python3.5-minimal (3.5.3-1+deb9u1) ...
+ Selecting previously unselected package python3-minimal.
+ Preparing to unpack .../2-python3-minimal_3.5.3-1_armhf.deb ...
+ Unpacking python3-minimal (3.5.3-1) ...
+ Selecting previously unselected package mime-support.
+ Preparing to unpack .../3-mime-support_3.60_all.deb ...
+ Unpacking mime-support (3.60) ...
+ Selecting previously unselected package libmpdec2:armhf.
+ Preparing to unpack .../4-libmpdec2_2.4.2-1_armhf.deb ...
+ Unpacking libmpdec2:armhf (2.4.2-1) ...
+ Selecting previously unselected package libpython3.5-stdlib:armhf.
+ Preparing to unpack .../5-libpython3.5-stdlib_3.5.3-1+deb9u1_armhf.deb ...
+ Unpacking libpython3.5-stdlib:armhf (3.5.3-1+deb9u1) ...
+ Selecting previously unselected package python3.5.
+ Preparing to unpack .../6-python3.5_3.5.3-1+deb9u1_armhf.deb ...
+ Unpacking python3.5 (3.5.3-1+deb9u1) ...
+ Selecting previously unselected package libpython3-stdlib:armhf.
+ Preparing to unpack .../7-libpython3-stdlib_3.5.3-1_armhf.deb ...
+ Unpacking libpython3-stdlib:armhf (3.5.3-1) ...
+ Selecting previously unselected package dh-python.
+ Preparing to unpack .../8-dh-python_2.20170125_all.deb ...
+ Unpacking dh-python (2.20170125) ...
+ Setting up libpython3.5-minimal:armhf (3.5.3-1+deb9u1) ...
+ Setting up python3.5-minimal (3.5.3-1+deb9u1) ...
+ Setting up python3-minimal (3.5.3-1) ...
+ Selecting previously unselected package python3.
+ (Reading database ... 21240 files and directories currently installed.)
+ Preparing to unpack .../python3_3.5.3-1_armhf.deb ...
+ Unpacking python3 (3.5.3-1) ...
+ Selecting previously unselected package fail2ban.
+ Preparing to unpack .../fail2ban_0.9.6-2_all.deb ...
+ Unpacking fail2ban (0.9.6-2) ...
+ Setting up mime-support (3.60) ...
+ Processing triggers for libc-bin (2.24-11+deb9u3) ...
+ Processing triggers for systemd (232-25+deb9u8) ...
+ Setting up libmpdec2:armhf (2.4.2-1) ...
+ Setting up libpython3.5-stdlib:armhf (3.5.3-1+deb9u1) ...
+ Setting up python3.5 (3.5.3-1+deb9u1) ...
+ Setting up libpython3-stdlib:armhf (3.5.3-1) ...
+ Setting up python3 (3.5.3-1) ...
+ running python rtupdate hooks for python3.5...
+ running python post-rtupdate hooks for python3.5...
+ Setting up dh-python (2.20170125) ...
+ Setting up fail2ban (0.9.6-2) ...
+ Created symlink /etc/systemd/system/multi-user.target.wants/fail2ban.service → /lib/systemd/system/fail2ban.service.
+ Job for fail2ban.service failed because the control process exited with error code.
+ See "systemctl status fail2ban.service" and "journalctl -xe" for details.
+ invoke-rc.d: initscript fail2ban, action "start" failed.
+ ● fail2ban.service - Fail2Ban Service
+    Loaded: loaded (/lib/systemd/system/fail2ban.service; enabled; vendor preset: enabled)
+    Active: activating (auto-restart) (Result: exit-code) since Tue 2019-01-22 20:02:32 GMT; 20ms ago
+      Docs: man:fail2ban(1)
+   Process: 5576 ExecStart=/usr/bin/fail2ban-client -x start (code=exited, status=255)
+ 
+ Jan 22 20:02:32 DietPi systemd[1]: fail2ban.service: Unit entered failed state.
+ Jan 22 20:02:32 DietPi systemd[1]: fail2ban.service: Failed with result 'exit-code'.
+ dpkg: error processing package fail2ban (--configure):
+  subprocess installed post-installation script returned error exit status 1
+ Processing triggers for libc-bin (2.24-11+deb9u3) ...
+ Processing triggers for systemd (232-25+deb9u8) ...
+ Errors were encountered while processing:
+  fail2ban
+ E: Sub-process /usr/bin/dpkg returned an error code (1)
+ 
+ *** RASPI BOOSTRAP SERVICE ***
+ Created symlink /etc/systemd/system/multi-user.target.wants/bootstrap.service → /etc/systemd/system/bootstrap.service.
+ 
+ *** RASPI BACKGROUND SERVICE ***
+ Created symlink /etc/systemd/system/multi-user.target.wants/background.service → /etc/systemd/system/background.service.
+ *** Adding Tor Sources to sources.list ***
+ deb http://deb.torproject.org/torproject.org stretch main
+ deb-src http://deb.torproject.org/torproject.org stretch main
+ OK
+ 
+ *** Installing dirmngr ***
+ Reading package lists... Done
+ Building dependency tree       
+ Reading state information... Done
+ dirmngr is already the newest version (2.1.18-8~deb9u3).
+ 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+ 1 not fully installed or removed.
+ After this operation, 0 B of additional disk space will be used.
+ Do you want to continue? [Y/n] y
+ Setting up fail2ban (0.9.6-2) ...
+ Job for fail2ban.service failed because the control process exited with error code.
+ See "systemctl status fail2ban.service" and "journalctl -xe" for details.
+ invoke-rc.d: initscript fail2ban, action "start" failed.
+ ● fail2ban.service - Fail2Ban Service
+    Loaded: loaded (/lib/systemd/system/fail2ban.service; enabled; vendor preset: enabled)
+    Active: activating (auto-restart) (Result: exit-code) since Tue 2019-01-22 20:53:28 GMT; 20ms ago
+      Docs: man:fail2ban(1)
+   Process: 7614 ExecStart=/usr/bin/fail2ban-client -x start (code=exited, status=255)
+ 
+ Jan 22 20:53:28 DietPi systemd[1]: fail2ban.service: Unit entered failed state.
+ Jan 22 20:53:28 DietPi systemd[1]: fail2ban.service: Failed with result 'exit-code'.
+ dpkg: error processing package fail2ban (--configure):
+  subprocess installed post-installation script returned error exit status 1
+ Errors were encountered while processing:
+  fail2ban
+ E: Sub-process /usr/bin/dpkg returned an error code (1)
+ 
+ *** Fetching GPG key ***
+ gpg: keyserver receive failed: No data
+ gpg: WARNING: nothing exported
+ gpg: no valid OpenPGP data found.
+ gpg: keyserver receive failed: No data
+ gpg: WARNING: nothing exported
+ gpg: no valid OpenPGP data found.
+ !!!!!! Please check if the above really worked!
+ 
+ **********************************************
+ ALMOST READY
+ **********************************************
+ 
+ Your SD Card Image for RaspiBlitz is almost ready.
+ Last step is to install LCD drivers. This will reboot your Pi when done.
+ 
+ Maybe take the chance and look thru the output above if you can spot any errror.
+ 
+ After final reboot - your SD Card Image is ready.
+ 
+ IMPORTANT IF WANT TO MAKE A RELEASE IMAGE FROM THIS BUILD:
+ login once after reboot without HDD and run 'XXprepareRelease.sh'
+ 
+ Press ENTER to install LCD and reboot ...
+ 
+ sudo: raspi-config: command not found
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+           ┌──────────────────────────────────Display─────────────────────────────────────┐
+           │ Are you using the default display available from Amazon?                     │  
+           │ Select 'No' if you are using the Swiss version from play-zone.ch!            │  
+           ├──────────────────────────────────────────────────────────────────────────────┤  
+           │                         < Yes >             < No  >                          │  
+           └──────────────────────────────────────────────────────────────────────────────┘  
+             
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ E: Unable to locate package raspberrypi-bootloader
+ E: No packages found
+ Cloning into 'LCD-show'...
+ remote: Enumerating objects: 853, done.
+ remote: Total 853 (delta 0), reused 0 (delta 0), pack-reused 853
+ Receiving objects: 100% (853/853), 456.73 KiB | 698.00 KiB/s, done.
+ Resolving deltas: 100% (547/547), done.
+ cp: cannot create regular file '/boot/overlays/': Not a directory
+ cp: cannot create regular file '/boot/overlays/tft35a.dtbo': No such file or directory
+ cp: cannot create regular file '/usr/share/X11/xorg.conf.d/': Not a directory
+ this is not raspberrypi kernel, no need to update touch configure, reboot
+ Connection to 192.168.1.175 closed by remote host.
+ Connection to 192.168.1.175 closed.
+ openoms@buidl:~$ 
+ 

\ No newline at end of file