You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
256 lines
11 KiB
256 lines
11 KiB
# IMPORTANT:
|
|
# - Modifications to /boot/dietpi.txt will not be preserved on reboot.
|
|
# - Please ensure you edit from the DietPi-RAMdisk location: /DietPi/dietpi.txt
|
|
|
|
# NB: This is intended for advanced users, unless you know what you are doing, do not edit this file. Please use the DietPi programs instead.
|
|
# NB: Do not remove uncommented lines, as the items are scraped by DietPi programs, on demand.
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
# D I E T - P I
|
|
# DietPi-Automation settings, applied on the 1st boot of DietPi, ONCE
|
|
#------------------------------------------------------------------------------------------------------
|
|
|
|
##### Networking Options #####
|
|
|
|
# If both Ethernet and Wifi are enabled, Wifi will take priority and Ethernet will be disabled.
|
|
# 1=enabled
|
|
AUTO_SETUP_NET_ETHERNET_ENABLED=1
|
|
AUTO_SETUP_NET_WIFI_ENABLED=0
|
|
|
|
# If using WiFi, please edit the following to pre-enter creds /boot/dietpi-wifi.txt
|
|
|
|
# Enter your Static Network details below, if applicable.
|
|
AUTO_SETUP_NET_USESTATIC=0
|
|
AUTO_SETUP_NET_STATIC_IP=192.168.0.100
|
|
AUTO_SETUP_NET_STATIC_MASK=255.255.255.0
|
|
AUTO_SETUP_NET_STATIC_GATEWAY=192.168.0.1
|
|
AUTO_SETUP_NET_STATIC_DNS=8.8.8.8
|
|
|
|
# Hostname
|
|
AUTO_SETUP_NET_HOSTNAME=DietPi
|
|
|
|
# Force ethernet speeds
|
|
# NB: This is mainly aimed at Pine A64's which may have an HW issue that causes unstable 1Gbit link.
|
|
# 0=automatic speed | 10 = 10mbit, 100 = 100mbit etc
|
|
AUTO_SETUP_NET_ETH_FORCE_SPEED=0
|
|
|
|
##### Misc Options #####
|
|
|
|
# Size of swapfile to generate (MB)
|
|
# 0=Disabled | 1=auto (2GB-RAM = size) | 2+=manual
|
|
AUTO_SETUP_SWAPFILE_SIZE=1
|
|
# Optional swapfile location
|
|
AUTO_SETUP_SWAPFILE_LOCATION=/var/swap
|
|
|
|
# Unmask (enable) systemd-logind service, which is masked by default on DietPi
|
|
AUTO_UNMASK_LOGIND=0
|
|
|
|
##### Software Automation Options #####
|
|
|
|
# Fully automate the installation
|
|
# 1=Automated installation with no user inputs.
|
|
# It is HIGHLY recommended to also set CONFIG_BOOT_WAIT_FOR_NETWORK=2, to force infinite wait for network connection during boot, preventing no connection errors due to timeout.
|
|
AUTO_SETUP_AUTOMATED=0
|
|
|
|
# Global Password to be applied for the system
|
|
# Requires AUTO_SETUP_AUTOMATED=1
|
|
# Affects user "root" and "dietpi" login passwords, and, all software installed by dietpi-software, that requires a password
|
|
# eg: MySQL, Transmission, Deluge etc.
|
|
# WARN: Passwords with the any of the following characters are not supported: \"$
|
|
# WARN: Do NOT change this entry after 1st run setup of DietPi has been completed. It is always scraped by dietpi-software.
|
|
AUTO_SETUP_GLOBAL_PASSWORD=dietpi
|
|
|
|
# DietPi-Software to automatically install. | requires AUTO_SETUP_AUTOMATED=1
|
|
# For a list of software index's (ID's), run '/DietPi/dietpi/dietpi-software list'
|
|
# No limit on number entries, add as many as you need and uncomment the line.
|
|
# DietPi will automatically install all pre-reqs (eg: ALSA/XSERVER for desktops etc)
|
|
# - Examples:
|
|
#AUTO_SETUP_INSTALL_SOFTWARE_ID=23 #will install Desktop LXDE
|
|
#AUTO_SETUP_INSTALL_SOFTWARE_ID=74 #will install LAMP webserver stack
|
|
#AUTO_SETUP_INSTALL_SOFTWARE_ID=44 #will install Bittorrent transmission
|
|
|
|
# DietPi-Software Choice System
|
|
# SSH Server Selection:
|
|
# 0=none
|
|
# -1=dropbear
|
|
# -2=opensshserver
|
|
AUTO_SETUP_SSH_SERVER_INDEX=-1
|
|
|
|
# File Server Selection:
|
|
# 0=none/manual
|
|
# -1=proftp
|
|
# -2=samba
|
|
AUTO_SETUP_FILE_SERVER_INDEX=0
|
|
|
|
# Logging Mode Selection:
|
|
# 0=none/manual
|
|
# -1=ramlog 1h clear
|
|
# -2=ramlog 1h save clear
|
|
# -3=logrotate + rsyslog
|
|
AUTO_SETUP_LOGGING_INDEX=-1
|
|
# RAMlog max tmpfs size (MB). 50MB should be fine for single use. 200MB+ for heavy webserver and access log use etc.
|
|
AUTO_SETUP_RAMLOG_MAXSIZE=50
|
|
|
|
# Webserver Preference Selection:
|
|
# NB: This will get ignored, if you have manually selected any WEBSERVER_Stack.
|
|
# 0=Apache2
|
|
# -1=Nginx
|
|
# -2=Lighttpd
|
|
AUTO_SETUP_WEB_SERVER_INDEX=-2
|
|
|
|
# DietPi-Autostart | Requires AUTO_SETUP_AUTOMATED=1
|
|
# After installation is completed, which program should the system boot to?
|
|
# 0=Console 7=Console+auto root login | 1=Kodi 2=Desktops (LXDE/MATE etc) 5=DietPi-Cloudshell 6=Uae4ARM (Fastboot) 8=Uae4ARM (standard boot) 9=dxx-rebirth
|
|
AUTO_SETUP_AUTOSTART_TARGET_INDEX=0
|
|
|
|
# Language/Regional settings | Requires AUTO_SETUP_AUTOMATED=1
|
|
# Timezone eg: Europe/London America/New_York | Full list (TZ*): https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
|
|
AUTO_SETUP_TIMEZONE=Europe/London
|
|
# Locale eg: en_GB.UTF-8 / en_US.UTF-8 etc. One entry ONLY.
|
|
AUTO_SETUP_LOCALE=en_GB.UTF-8
|
|
# Keyboard Layout eg: gb us de fr
|
|
AUTO_SETUP_KEYBOARD_LAYOUT=gb
|
|
|
|
# Custom Script (pre-networking and pre-DietPi install) | Runs before DietPi installation and networking
|
|
# Allows you to automatically execute a custom script before networking and DietPi installation is started
|
|
# Option 1 = Copy your script to /boot/Automation_Custom_PreScript.sh and it will be executed automatically.
|
|
# NB: Executed script log /var/tmp/dietpi/logs/dietpi-automation_custom_prescript.log
|
|
|
|
# Custom Script (post-networking and post-DietPi install) | Runs after DietPi installation is completed
|
|
# Allows you to automatically execute a custom script at the end of DietPi installation.
|
|
# Option 1 = Copy your script to /boot/Automation_Custom_Script.sh and it will be executed automatically.
|
|
# Option 2 = Host your script online, then use AUTO_SETUP_CUSTOM_SCRIPT_EXEC=http://myweb.com/myscript.sh , it will be downloaded and executed automatically. | 0=disabled
|
|
# NB: Executed script log /var/tmp/dietpi/logs/dietpi-automation_custom_script.log
|
|
AUTO_SETUP_CUSTOM_SCRIPT_EXEC=0
|
|
|
|
#Disable HDMI (and GPU/VPU where supported) output for supported devices:
|
|
# RPi | Odroid C1 | Odroid C2
|
|
AUTO_SETUP_HEADLESS=0
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
# D I E T - P I
|
|
# DietPi-Config settings
|
|
#------------------------------------------------------------------------------------------------------
|
|
|
|
#Cpu Governor | ondemand | powersave | performance | conservative
|
|
CONFIG_CPU_GOVERNOR=ondemand
|
|
CONFIG_CPU_USAGE_THROTTLE_UP=50
|
|
|
|
#CPU Frequency Limits
|
|
# NB: Intel CPU's use a percentage value (%) from 0-100 (eg: 55)
|
|
# NB: All other devices must use a specific MHz value (eg: 1600)
|
|
# Limit the MAX CPU frequency for all cores | Disabled=disabled
|
|
CONFIG_CPU_MAX_FREQ=Disabled
|
|
# Limit the MIN CPU frequency for all cores | Disabled=disabled
|
|
CONFIG_CPU_MIN_FREQ=Disabled
|
|
|
|
# Disable Intel-based turbo/boost stepping. This flag should not be required, setting <100% MAX frequency should disable Turbo on Intel CPU's.
|
|
CONFIG_CPU_DISABLE_TURBO=0
|
|
|
|
#Min value 10000 microseconds (10ms)
|
|
CONFIG_CPU_ONDEMAND_SAMPLE_RATE=25000
|
|
|
|
#sampling rate * down factor / 1000 = Milliseconds (40 = 1000ms when sampling rate is 25000)
|
|
CONFIG_CPU_ONDEMAND_SAMPLE_DOWNFACTOR=80
|
|
|
|
#Proxy settings | System-wide proxy settings. Use dietpi-config > networking options to apply.
|
|
# NB: Do not modify, you must use dietpi-config to configure/set options
|
|
CONFIG_PROXY_ENABLED=0
|
|
CONFIG_PROXY_ADDRESS=MyProxyServer.com
|
|
CONFIG_PROXY_PORT=8080
|
|
CONFIG_PROXY_USERNAME=
|
|
CONFIG_PROXY_PASSWORD=
|
|
|
|
#Delay boot until network is established: 0=disabled | 1=10 second wait max (default) | 2=infinite wait
|
|
CONFIG_BOOT_WAIT_FOR_NETWORK=1
|
|
|
|
#DietPi checks for updates (allows dietpi to check for updates on a daily basis and boot using a <1kb file download.)
|
|
CONFIG_CHECK_DIETPI_UPDATES=1
|
|
# Optional: Automatically update DietPi when updates are available. | requires CONFIG_CHECK_DIETPI_UPDATES=1
|
|
CONFIG_AUTO_DIETPI_UPDATES=0
|
|
|
|
#NTPD Update Mode: 0=disabled | 1=boot only | 2=boot + daily | 3=boot + hourly | 4=Daemon + Drift
|
|
CONFIG_NTP_MODE=2
|
|
|
|
#WiFi country code. 2 character value (eg GB US DE JP): https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2
|
|
CONFIG_WIFI_COUNTRY_CODE=GB
|
|
|
|
#Serial Console: Set to 0 if you do not require serial console.
|
|
CONFIG_SERIAL_CONSOLE_ENABLE=1
|
|
|
|
#Soundcard
|
|
CONFIG_SOUNDCARD=none
|
|
|
|
#LCD Panel addon
|
|
# NB: Do not modify, you must use dietpi-config to configure/set options
|
|
CONFIG_LCDPANEL=none
|
|
|
|
#IPv6
|
|
CONFIG_ENABLE_IPV6=1
|
|
|
|
#Prefer IPv4 with APT and wget, NB: This has no effect if IPv6 is disabled anyway!
|
|
CONFIG_PREFER_IPV4=1
|
|
|
|
#APT mirrors which are applied to /etc/apt/sources.list | Values here will also be applied during 1st run setup
|
|
# Raspbian = https://www.raspbian.org/RaspbianMirrors
|
|
# Debian = https://www.debian.org/mirror/official#list
|
|
CONFIG_APT_RASPBIAN_MIRROR=http://raspbian.raspberrypi.org/raspbian
|
|
CONFIG_APT_DEBIAN_MIRROR=https://deb.debian.org/debian/
|
|
|
|
#NTPD mirror, applied to /etc/ntp.conf
|
|
# For a full list, please see http://www.pool.ntp.org
|
|
# Please remove the initial integer and full stop from the value (removing 0.). eg: debian.pool.ntp.org
|
|
CONFIG_NTP_MIRROR=debian.pool.ntp.org
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
# D I E T - P I
|
|
# DietPi-Software settings
|
|
#------------------------------------------------------------------------------------------------------
|
|
#Enter your EmonCMS.org write API key here. It will be applied automatically during EmonPi/Hub installation.
|
|
# eg: SOFTWARE_EMONHUB_APIKEY=b4dfmk2o203mmxx93a
|
|
SOFTWARE_EMONHUB_APIKEY=
|
|
|
|
#VNC Server Options
|
|
SOFTWARE_VNCSERVER_WIDTH=1280
|
|
SOFTWARE_VNCSERVER_HEIGHT=720
|
|
SOFTWARE_VNCSERVER_DEPTH=16
|
|
SOFTWARE_VNCSERVER_DISPLAY_INDEX=1
|
|
SOFTWARE_VNCSERVER_SHARE_DESKTOP=0
|
|
|
|
#Optional username for ownCloud/Nextcloud admin account, the default is 'admin'. Applied during installation.
|
|
SOFTWARE_OWNCLOUD_NEXTCLOUD_USERNAME=admin
|
|
|
|
#Optional data directory for ownCloud, default is '/mnt/dietpi_userdata/owncloud_data'. Applied during installation.
|
|
# This option is for advanced users. For full compatibility, please keep this options defaults, and, use dietpi-drive_manager to move the DietPi user data location.
|
|
SOFTWARE_OWNCLOUD_DATADIR=/mnt/dietpi_userdata/owncloud_data
|
|
|
|
#Optional data directory for Nextcloud, default is '/mnt/dietpi_userdata/nextcloud_data'. Applied during installation.
|
|
# This option is for advanced users. For full compatibility, please keep this options defaults, and, use dietpi-drive_manager to move the DietPi user data location.
|
|
SOFTWARE_NEXTCLOUD_DATADIR=/mnt/dietpi_userdata/nextcloud_data
|
|
|
|
#Wifi Hotspot
|
|
SOFTWARE_WIFI_HOTSPOT_SSID=DietPi-HotSpot
|
|
# minimum of 8 characters
|
|
SOFTWARE_WIFI_HOTSPOT_KEY=dietpihotspot
|
|
SOFTWARE_WIFI_HOTSPOT_CHANNEL=3
|
|
|
|
#Xorg options
|
|
# DPI 96(default) 120(+25%) 144(+50%) 168(+75%) 192(+100%)
|
|
SOFTWARE_XORG_DPI=96
|
|
|
|
#Chromium Options
|
|
SOFTWARE_CHROMIUM_RES_X=1280
|
|
SOFTWARE_CHROMIUM_RES_Y=720
|
|
SOFTWARE_CHROMIUM_AUTOSTART_URL=https://google.com
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
# D I E T - P I
|
|
# Dev settings
|
|
#------------------------------------------------------------------------------------------------------
|
|
DEV_GITBRANCH=master
|
|
DEV_GITOWNER=Fourdee
|
|
|
|
#------------------------------------------------------------------------------------------------------
|
|
# D I E T - P I
|
|
# Settings, automatically added by dietpi-update
|
|
#------------------------------------------------------------------------------------------------------
|