You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

129 lines
4.9 KiB

10 years ago
diff -u -r ../elfutils-0.159/libelf/elf_getarsym.c ./libelf/elf_getarsym.c
--- ../elfutils-0.159/libelf/elf_getarsym.c 2014-05-18 16:32:15.000000000 +0200
+++ ./libelf/elf_getarsym.c 2014-05-30 14:53:58.602211085 +0200
@@ -45,6 +45,124 @@
#include <dl-hash.h>
#include "libelfP.h"
+#ifdef __ANDROID__
+/* Find the first occurrence of C in S. */
+void *
+rawmemchr (const void *s, int c_in)
+{
+ /* On 32-bit hardware, choosing longword to be a 32-bit unsigned
+ long instead of a 64-bit uintmax_t tends to give better
+ performance. On 64-bit hardware, unsigned long is generally 64
+ bits already. Change this typedef to experiment with
+ performance. */
+ typedef unsigned long int longword;
+
+ const unsigned char *char_ptr;
+ const longword *longword_ptr;
+ longword repeated_one;
+ longword repeated_c;
+ unsigned char c;
+
+ c = (unsigned char) c_in;
+
+ /* Handle the first few bytes by reading one byte at a time.
+ Do this until CHAR_PTR is aligned on a longword boundary. */
+ for (char_ptr = (const unsigned char *) s;
+ (size_t) char_ptr % sizeof (longword) != 0;
+ ++char_ptr)
+ if (*char_ptr == c)
+ return (void *) char_ptr;
+
+ longword_ptr = (const longword *) char_ptr;
+
+ /* All these elucidatory comments refer to 4-byte longwords,
+ but the theory applies equally well to any size longwords. */
+
+ /* Compute auxiliary longword values:
+ repeated_one is a value which has a 1 in every byte.
+ repeated_c has c in every byte. */
+ repeated_one = 0x01010101;
+ repeated_c = c | (c << 8);
+ repeated_c |= repeated_c << 16;
+ if (0xffffffffU < (longword) -1)
+ {
+ repeated_one |= repeated_one << 31 << 1;
+ repeated_c |= repeated_c << 31 << 1;
+ if (8 < sizeof (longword))
+ {
+ size_t i;
+
+ for (i = 64; i < sizeof (longword) * 8; i *= 2)
+ {
+ repeated_one |= repeated_one << i;
+ repeated_c |= repeated_c << i;
+ }
+ }
+ }
+
+ /* Instead of the traditional loop which tests each byte, we will
+ test a longword at a time. The tricky part is testing if *any of
+ the four* bytes in the longword in question are equal to NUL or
+ c. We first use an xor with repeated_c. This reduces the task
+ to testing whether *any of the four* bytes in longword1 is zero.
+
+ We compute tmp =
+ ((longword1 - repeated_one) & ~longword1) & (repeated_one << 7).
+ That is, we perform the following operations:
+ 1. Subtract repeated_one.
+ 2. & ~longword1.
+ 3. & a mask consisting of 0x80 in every byte.
+ Consider what happens in each byte:
+ - If a byte of longword1 is zero, step 1 and 2 transform it into 0xff,
+ and step 3 transforms it into 0x80. A carry can also be propagated
+ to more significant bytes.
+ - If a byte of longword1 is nonzero, let its lowest 1 bit be at
+ position k (0 <= k <= 7); so the lowest k bits are 0. After step 1,
+ the byte ends in a single bit of value 0 and k bits of value 1.
+ After step 2, the result is just k bits of value 1: 2^k - 1. After
+ step 3, the result is 0. And no carry is produced.
+ So, if longword1 has only non-zero bytes, tmp is zero.
+ Whereas if longword1 has a zero byte, call j the position of the least
+ significant zero byte. Then the result has a zero at positions 0, ...,
+ j-1 and a 0x80 at position j. We cannot predict the result at the more
+ significant bytes (positions j+1..3), but it does not matter since we
+ already have a non-zero bit at position 8*j+7.
+
+ The test whether any byte in longword1 is zero is equivalent
+ to testing whether tmp is nonzero.
+
+ This test can read beyond the end of a string, depending on where
+ C_IN is encountered. However, this is considered safe since the
+ initialization phase ensured that the read will be aligned,
+ therefore, the read will not cross page boundaries and will not
+ cause a fault. */
+
+ while (1)
+ {
+ longword longword1 = *longword_ptr ^ repeated_c;
+
+ if ((((longword1 - repeated_one) & ~longword1)
+ & (repeated_one << 7)) != 0)
+ break;
+ longword_ptr++;
+ }
+
+ char_ptr = (const unsigned char *) longword_ptr;
+
+ /* At this point, we know that one of the sizeof (longword) bytes
+ starting at char_ptr is == c. On little-endian machines, we
+ could determine the first such byte without any further memory
+ accesses, just by looking at the tmp result from the last loop
+ iteration. But this does not work on big-endian machines.
+ Choose code that works in both cases. */
+
+ char_ptr = (unsigned char *) longword_ptr;
+ while (*char_ptr != c)
+ char_ptr++;
+ return (void *) char_ptr;
+}
+#endif
+
static int
read_number_entries (uint64_t *nump, Elf *elf, size_t *offp, bool index64_p)