Properly package texlive and split package into texlive & texlive-bin (#1203)

* texlive: enable makeindex and put man files and headers in proper location.

* texlive: upgrade to 2017

* texlive: split into texlive-bin and arch independent texlive-base.

Download texmf-dist and other tarballs and package necessary files instead of
using tlnet installer on device.

* texlive-base: extract only a minimal set of files from texmf-dist, do complete
uninstall on removal. Patch some files.

The texmf-dist tar is quite large so use --checkpoint to indicate progress.

* texlive: use gnupg2 instead of gnupg

* texlive: fix texlive profile

* texlive: added TL_BINDIR variable to simplify build scripts

* texlive: replace tlmgr symlink with small wrapper.

After `tlmgr update --self` has been run, the shebang of tlmgr.pl is
none-working and there is a reference to /bin/sh in TLUtils.pm. This wrapper
fixes this (if needed) before tlmgr is run.

* texlive: update command-not-found with a few common texlive commands.

* remove un-needed minimal.list

* Format generation working. xelatex activated.

Remove all texmf-dist files created by texlive-bin package.

* texlive: fix installation and removal of texlive-{bin,base}. All essential
fixes done.

Only thing remaining to fix is figuring out how to deal with the transition
texlive -> texlive-{bin,base}.

* texlive: use Breaks instead of Conflicts

* texlive: properly fix split into two packages [WIP]

* delete old termux-install-tl.sh

* texlive: Fix so that the upgrade from texlive 20170524-2 goes smoothly and
works as it should (with Breaks and Replaces). Also major clean up of texlive/build.sh.

* texlive: minor clean up of texlive/build.sh. Update patches to avoid (silent)
complaints from patching. Add previously forgotten install-tl.list with list
of files to take from install-tl-unx.tar.gz.

* texlive: make texlive-bin-dev properly replace texlive-dev.

Everything is done now, just need to wait for breaks and subpkg_replaces
before opening a pull request.

* texlive: skip format generation on install, rm old files in texlive-bin
as well.

Also decrease verbosity of installation

* texlive: when deleting old files, leave texmf-dist alone

* texlive: fix typo, correctly remove files from old texlive version

packages/command-not-found/commands.h

@@ -1838,7 +1838,13 @@ char const* const commands[] = {
 " texi2pdf",
 " texindex",
 "texlive",
-" termux-install-tl",
+" bibtex",
+" lualatex",
+" makeindex",
+" pdflatex",
+" texliveonfly",
+" tlmgr",
+" xelatex",
 "tig",
 " tig",
 "timewarrior",

packages/texlive-bin/build.sh

@@ -0,0 +1,102 @@
+TERMUX_PKG_HOMEPAGE=https://www.tug.org/texlive/
+TERMUX_PKG_DESCRIPTION="TeX Live is a distribution of the TeX typesetting system."
+TERMUX_PKG_MAINTAINER="Henrik Grimler @Grimler91"
+_MAJOR_VERSION=20170524
+_MINOR_VERSION=
+TERMUX_PKG_VERSION=${_MAJOR_VERSION}${_MINOR_VERSION}
+TERMUX_PKG_SRCURL=ftp://tug.org/historic/systems/texlive/${TERMUX_PKG_VERSION:0:4}/texlive-${TERMUX_PKG_VERSION}-source.tar.xz
+TERMUX_PKG_SHA256="0161695304e941334dc0b3b5dabcf8edf46c09b7bc33eea8229b5ead7ccfb2aa"
+TERMUX_PKG_DEPENDS="freetype, libpng, libgd, libgmp, libmpfr, libicu, liblua, poppler, libgraphite, harfbuzz-icu, perl"
+TERMUX_PKG_FOLDERNAME=texlive-${_MAJOR_VERSION}-source
+TERMUX_PKG_BREAKS="texlive (<< 20170524-3)"
+TERMUX_PKG_REPLACES="texlive (<< 20170524-3)"
+TERMUX_PKG_NO_DEVELSPLIT=yes
+
+TL_ROOT=$TERMUX_PREFIX/opt/texlive/${TERMUX_PKG_VERSION:0:4}
+TL_BINDIR=$TL_ROOT/bin/custom
+
+TERMUX_PKG_EXTRA_CONFIGURE_ARGS="
+AR=ar \
+RANLIB=ranlib \
+BUILDAR=ar \
+BUILDRANLIB=ranlib \
+ac_cv_c_bigendian=no \
+--prefix=$TL_ROOT \
+--bindir=$TL_BINDIR \
+--datarootdir=$TL_ROOT \
+--datadir=$TERMUX_PREFIX/share \
+--mandir=$TERMUX_PREFIX/share/man \
+--docdir=$TERMUX_PREFIX/share/doc \
+--infodir=$TERMUX_PREFIX/share/info \
+--libdir=$TERMUX_PREFIX/lib \
+--includedir=$TERMUX_PREFIX/include \
+--build=$TERMUX_BUILD_TUPLE \
+--enable-ttfdump=no \
+--enable-makeindexk=yes \
+--enable-makejvf=no \
+--enable-mendexk=no \
+--enable-musixtnt=no \
+--enable-ps2pk=no \
+--enable-seetexk=no \
+--enable-gregorio=no \
+--disable-native-texlive-build \
+--disable-bibtexu \
+--disable-dvisvgm \
+--disable-dialog \
+--disable-psutils \
+--disable-multiplatform \
+--disable-t1utils \
+--enable-luatex \
+--disable-luajittex \
+--disable-mflua \
+--disable-mfluajit \
+--disable-xz \
+--disable-pmx \
+--without-texinfo \
+--without-xdvipdfmx \
+--without-texi2html \
+--with-system-cairo \
+--with-system-graphite2 \
+--with-system-harfbuzz \
+--with-system-gd \
+--with-system-gmp \
+--with-system-icu \
+--with-system-lua \
+--with-system-mpfr \
+--with-system-poppler \
+--with-system-zlib \
+--with-system-xpdf \
+--with-system-lua \
+--without-x \
+--with-banner-add=/Termux"
+
+TERMUX_PKG_RM_AFTER_INSTALL="opt/texlive/${TERMUX_PKG_VERSION:0:4}/texmf-dist"
+
+termux_step_pre_configure() {
+	# When building against libicu 59.1 or later we need c++11:
+	CXXFLAGS+=" -std=c++11"
+}
+
+termux_step_post_make_install () {
+	mkdir -p $TERMUX_PREFIX/etc/profile.d/
+	echo "export PATH=\$PATH:$TL_BINDIR" > $TERMUX_PREFIX/etc/profile.d/texlive.sh
+	echo "export TMPDIR=$TERMUX_PREFIX/tmp/" >> $TERMUX_PREFIX/etc/profile.d/texlive.sh
+	chmod 0744 $TERMUX_PREFIX/etc/profile.d/texlive.sh
+	mv $TL_BINDIR/tlmgr $TL_BINDIR/tlmgr.ln
+	echo "#!$TERMUX_PREFIX/bin/sh" > $TL_BINDIR/tlmgr
+	echo "termux-fix-shebang $TL_ROOT/texmf-dist/scripts/texlive/tlmgr.pl" >> $TL_BINDIR/tlmgr
+	echo "sed -E -i '"'s@`/bin/sh@`'$TERMUX_PREFIX"/bin/sh@g' ${TL_ROOT}/tlpkg/TeXLive/TLUtils.pm" >> $TL_BINDIR/tlmgr
+	echo 'tlmgr.ln "$@"' >> $TL_BINDIR/tlmgr
+	chmod 0744 $TL_BINDIR/tlmgr
+}
+
+termux_step_create_debscripts () {
+	# Clean texlive's folder if needed (run on fresh install)
+	echo "if [ ! -f $TERMUX_PREFIX/opt/texlive/2016/install-tl -a ! -f $TERMUX_PREFIX/opt/texlive/2017/install-tl ]; then exit 0; else echo 'Removing residual files from old version of TeX Live for Termux'; fi" > preinst
+	echo "rm -rf $TERMUX_PREFIX/etc/profile.d/texlive.sh" >> preinst
+	echo "rm -rf $TERMUX_PREFIX/opt/texlive/2016"
+	# Let's not delete the previous texmf-dist so that people who have installed a full distribution won't need to download everything again
+	echo "rm -rf $TERMUX_PREFIX/opt/texlive/2017/!(texmf-dist)" >> preinst
+	echo "exit 0" >> preinst
+	chmod 0755 preinst
+}

packages/texlive-bin/texlive-bin-dev.subpackage.sh

@@ -0,0 +1,5 @@
+TERMUX_SUBPKG_INCLUDE="include lib/pkgconfig"
+TERMUX_SUBPKG_DESCRIPTION="Development files for texlive"
+TERMUX_SUBPKG_DEPENDS="texlive-bin"
+TERMUX_SUBPKG_REPLACES="texlive-dev"
+TERMUX_SUBPKG_CONFLICTS="texlive-dev"

packages/texlive/TLConfig.pm.patch

@@ -0,0 +1,19 @@
+--- src/texlive-20170524-extra/tlpkg/TeXLive/TLConfig.pm	2016-04-21 19:08:52.000000000 +0000
++++ ../TLConfig.pm	2017-05-30 13:18:48.030712610 +0000
+@@ -165,13 +165,13 @@
+     [ "b", 1, "postcode",
+       "Run postinst code blobs" ],
+   "sys_bin" =>
+-    [ "p", "/usr/local/bin", "sys_bin",
++    [ "p", "@TERMUX_PREFIX@/bin", "sys_bin",
+       "Destination for symlinks for binaries" ],
+   "sys_info" =>
+-    [ "p", "/usr/local/share/info", "sys_info",
++    [ "p", "@TERMUX_PREFIX@/share/info", "sys_info",
+       "Destination for symlinks for info docs" ],
+   "sys_man" =>
+-    [ "p", "/usr/local/share/man", "sys_man",
++    [ "p", "@TERMUX_PREFIX@/share/man", "sys_man",
+       "Destination for symlinks for man pages" ],
+   "w32_multi_user" =>
+     [ "b", 1, "multiuser",

packages/texlive/TLUtils.pm.patch

@@ -0,0 +1,11 @@
+--- src/texlive-20170524-extra/tlpkg/TeXLive/TLUtils.pm	2016-05-16 00:33:33.000000000 +0000
++++ ../TLUtils.pm	2017-05-30 14:09:38.505466432 +0000
+@@ -228,7 +228,7 @@
+       # We cannot rely on #! in config.guess but have to call /bin/sh
+       # explicitly because sometimes the 'noexec' flag is set in
+       # /etc/fstab for ISO9660 file systems.
+-      chomp (my $guessed_platform = `/bin/sh '$config_guess'`);
++      chomp (my $guessed_platform = `@TERMUX_PREFIX@/bin/sh '$config_guess'`);
+ 
+       # For example, if the disc or reader has hardware problems.
+       die "$0: could not run $config_guess, cannot proceed, sorry"

packages/texlive/build.sh

@@ -4,103 +4,94 @@ TERMUX_PKG_MAINTAINER="Henrik Grimler @Grimler91"
 _MAJOR_VERSION=20170524
 _MINOR_VERSION=
 TERMUX_PKG_VERSION=${_MAJOR_VERSION}${_MINOR_VERSION}
-TERMUX_PKG_REVISION=2
-TERMUX_PKG_SRCURL=ftp://tug.org/historic/systems/texlive/${TERMUX_PKG_VERSION:0:4}/texlive-${TERMUX_PKG_VERSION}-source.tar.xz
-TERMUX_PKG_SHA256="0161695304e941334dc0b3b5dabcf8edf46c09b7bc33eea8229b5ead7ccfb2aa"
-TERMUX_PKG_DEPENDS="freetype, libpng, libgd, libgmp, libmpfr, libicu, liblua, poppler, libgraphite, harfbuzz-icu, perl, xz-utils, wget, gnupg"
-TERMUX_PKG_FOLDERNAME=texlive-${_MAJOR_VERSION}-source
+TERMUX_PKG_REVISION=3
+TERMUX_PKG_SRCURL=("ftp://ftp.tug.org/texlive/historic/${TERMUX_PKG_VERSION:0:4}/"\
+{"texlive-$_MAJOR_VERSION-texmf.tar.xz",\
+"texlive-$_MAJOR_VERSION-extra.tar.xz",\
+"install-tl-unx.tar.gz"})
+TERMUX_PKG_SHA256=("3f63708b77f8615ec6f2f7c93259c5f584d1b89dd335a28f2362aef9e6f0c9ec"
+"afe49758c26fb51c2fae2e958d3f0c447b5cc22342ba4a4278119d39f5176d7f"
+"d4e07ed15dace1ea7fabe6d225ca45ba51f1cb7783e17850bc9fe3b890239d6d")
+TERMUX_PKG_DEPENDS="wget, perl, xz-utils, gnupg2, texlive-bin (>= 20170524)"
+TERMUX_PKG_FOLDERNAME=("texlive-$_MAJOR_VERSION-texmf"
+"texlive-$_MAJOR_VERSION-extra"
+"install-tl-$_MAJOR_VERSION")
+TL_FILE_LISTS=("texlive-texmf.list"
+"texlive-extra.list"
+"install-tl.list")
+TERMUX_PKG_PLATFORM_INDEPENDENT=yes
 
 TL_ROOT=$TERMUX_PREFIX/opt/texlive/${TERMUX_PKG_VERSION:0:4}
+TL_BINDIR=$TL_ROOT/bin/custom
 
-TERMUX_PKG_EXTRA_CONFIGURE_ARGS="
-AR=ar \
-RANLIB=ranlib \
-BUILDAR=ar \
-BUILDRANLIB=ranlib \
-ac_cv_c_bigendian=no \
---prefix=$TL_ROOT \
---bindir=$TL_ROOT/bin/pkg \
---datarootdir=$TL_ROOT \
---datadir=$TERMUX_PREFIX/share \
---mandir=$TERMUX_PREFIX/share/man \
---docdir=$TERMUX_PREFIX/share/doc \
---infodir=$TERMUX_PREFIX/share/info \
---libdir=$TERMUX_PREFIX/lib \
---includedir=$TERMUX_PREFIX/include \
---build=$TERMUX_BUILD_TUPLE \
---enable-ttfdump=no \
---enable-makeindexk=yes \
---enable-makejvf=no \
---enable-mendexk=no \
---enable-musixtnt=no \
---enable-ps2pk=no \
---enable-seetexk=no \
---enable-gregorio=no \
---disable-native-texlive-build \
---disable-bibtexu \
---disable-dvisvgm \
---disable-dialog \
---disable-psutils \
---disable-multiplatform \
---disable-t1utils \
---enable-luatex \
---disable-luajittex \
---disable-mflua \
---disable-mfluajit \
---disable-xz \
---disable-pmx \
---without-texinfo \
---without-xdvipdfmx \
---without-texi2html \
---with-system-cairo \
---with-system-graphite2 \
---with-system-harfbuzz \
---with-system-gd \
---with-system-gmp \
---with-system-icu \
---with-system-lua \
---with-system-mpfr \
---with-system-poppler \
---with-system-zlib \
---with-system-xpdf \
---with-system-lua \
---without-x \
---with-banner-add=/Termux"
-
-termux_step_pre_configure() {
-	# When building against libicu 59.1 or later we need c++11:
-	CXXFLAGS+=" -std=c++11"
+termux_step_extract_package() {
+	mkdir -p "$TERMUX_PKG_SRCDIR"
+	
+	cd "$TERMUX_PKG_TMPDIR"
+	for index in $(seq 0 2); do
+		local filename
+		filename=$(basename "${TERMUX_PKG_SRCURL[$index]}")
+		local file="$TERMUX_PKG_CACHEDIR/$filename"
+		termux_download "${TERMUX_PKG_SRCURL[$index]}" "$file" "${TERMUX_PKG_SHA256[$index]}"
+		
+		folder=${TERMUX_PKG_FOLDERNAME[$index]}
+		
+		rm -Rf $folder
+		echo "Extracting files listed in ${TL_FILE_LISTS[$index]} from $folder"
+		tar xf "$file" $(paste -d'\0' <(for i in $(seq 1 $( wc -l < $TERMUX_PKG_BUILDER_DIR/${TL_FILE_LISTS[$index]} )); do echo ${TERMUX_PKG_FOLDERNAME[$index]}/; done ) $TERMUX_PKG_BUILDER_DIR/${TL_FILE_LISTS[$index]} )
+	done
+	cp -r ${TERMUX_PKG_FOLDERNAME[@]} "$TERMUX_PKG_SRCDIR"
 }
 
-termux_step_post_make_install () {
-	cp $TERMUX_PKG_BUILDER_DIR/termux-install-tl.sh $TERMUX_PREFIX/bin/termux-install-tl
-	mkdir -p $TERMUX_PREFIX/etc/profile.d/
-	echo "export PATH=\$PATH:$TERMUX_PREFIX/opt/texlive/${TERMUX_PKG_VERSION:0:4}/bin/custom/" >> $TERMUX_PREFIX/etc/profile.d/texlive.sh
-	echo "export TMPDIR=$TERMUX_PREFIX/tmp/" >> $TERMUX_PREFIX/etc/profile.d/texlive.sh
-	chmod 0744 $TERMUX_PREFIX/etc/profile.d/texlive.sh
+termux_step_make() {
+	for index in $( seq 0 2 ); do
+		cp -r $TERMUX_PKG_SRCDIR/${TERMUX_PKG_FOLDERNAME[$index]}/* $TL_ROOT/
+	done
+
+	mkdir -p $TL_ROOT/{tlpkg/{backups,tlpobj},texmf-var/web2c}
+	cp $TERMUX_PKG_BUILDER_DIR/texlive.tlpdb $TL_ROOT/tlpkg/
+
+	perl -I$TL_ROOT/tlpkg/ $TL_ROOT/texmf-dist/scripts/texlive/mktexlsr.pl $TL_ROOT/texmf-dist
 }
 
 termux_step_create_debscripts () {
-        echo 'echo "========================================================"' > postinst
-	echo 'echo "retrieving texlive..."' >> postinst
-	echo 'echo "you can start this manually by calling termux-install-tl"' >> postinst
-        echo 'echo "========================================================"' >> postinst
-	echo "termux-install-tl" >> postinst
-	echo "exit 0" >> postinst
-	chmod 0755 postinst
-
-	# Clean texlive's folder if needed.
-	echo "if [ ! -f $TERMUX_PREFIX/opt/texlive/2016/install-tl ]; then exit 0; else echo 'Removing residual files from old version of TeX Live for Termux'; fi" > preinst
-	echo "rm -rf $TERMUX_PREFIX/{etc/profile.d/texlive.sh,opt/texlive}" >> preinst
+	# Clean texlive's folder if needed (run on upgrade)
+	echo "if [ ! -f $TERMUX_PREFIX/opt/texlive/2016/install-tl -a ! -f $TERMUX_PREFIX/opt/texlive/2017/install-tl ]; then exit 0; else echo 'Removing residual files from old version of TeX Live for Termux'; fi" > preinst
+	echo "rm -rf $TERMUX_PREFIX/etc/profile.d/texlive.sh" >> preinst
+	echo "rm -rf $TERMUX_PREFIX/opt/texlive/2016" >> preinst
+	# Let's not delete the previous texmf-dist so that people who have installed a full distribution won't need to download everything again
+	echo "rm -rf $TERMUX_PREFIX/opt/texlive/2017/!(texmf-dist)" >> preinst
 	echo "exit 0" >> preinst
 	chmod 0755 preinst
 
-	# Remove all files installed/downloaded through termux-install-tl
+	echo "mkdir -p $TL_ROOT/{tlpkg/{backups,tlpobj},texmf-var/{web2c,tex/generic/config}}" > postinst
+	echo "export PATH=\$PATH:$TL_BINDIR" >> postinst
+	echo "echo Updating tlmgr" >> postinst
+	echo "tlmgr update --self" >> postinst
+	echo "echo Generating language files and setting up symlinks" >> postinst
+	echo "tlmgr -q generate language" >> postinst
+	echo "mktexlsr $TL_ROOT/texmf-var" >> postinst
+	echo "texlinks" >> postinst
+	echo "echo ''" >> postinst
+	echo "echo Welcome to TeX Live!" >> postinst
+	echo "echo ''" >> postinst
+	echo "echo 'TeX Live is a joint project of the TeX user groups around the world;'" >> postinst
+	echo "echo 'please consider supporting it by joining the group best for you.'" >> postinst
+	echo "echo 'The list of groups is available on the web at http://tug.org/usergroups.html.'" >> postinst
+	echo "echo ''" >> postinst
+	echo "echo 'Please run \"source $PREFIX/etc/profile.d/texlive.sh\" to add texlive'\''s binaries to your current shell'\''s PATH.'" >> postinst
+	echo "exit 0" >> postinst
+	chmod 0755 postinst
+
+	# Remove all files installed through tlmgr on removal
 	echo 'if [ $1 != "remove" ]; then exit 0; fi' > prerm
+	#echo "tlmgr remove --dry-run "
 	echo "echo Running texlinks --unlink" >> prerm
 	echo "texlinks --unlink" >> prerm
-	echo "echo Removing bin/custom and texmf-dist" >> prerm
-	echo "rm -rf $TL_ROOT/{bin/custom,texmf-dist}" >> prerm
+	echo "echo Removing texmf-dist" >> prerm
+	echo "rm -rf $TL_ROOT/texmf-dist" >> prerm
+	echo "echo Removing texmf-var and tlpkg" >> prerm
+	echo "rm -rf $TL_ROOT/{texmf-var,tlpkg/{texlive.tlpdb.*,tlpobj,backups}}" >> prerm
 	echo "exit 0" >> prerm
 	chmod 0755 prerm
 }

packages/texlive/fmtutil.cnf.patch

@@ -0,0 +1,12 @@
+We've disabled luajittex when building the binaries, so lets prevent texlive from trying to generate formats for it.
+--- src/texlive-20170524-texmf/texmf-dist/web2c/fmtutil.cnf	2016-05-15 01:17:09.000000000 +0000
++++ ../fmtutil.cnf	2017-05-31 05:20:32.516130878 +0000
+@@ -82,7 +82,7 @@
+ # from luatex:
+ luatex luatex language.def,language.dat.lua luatex.ini
+ dviluatex luatex language.def,language.dat.lua dviluatex.ini
+-luajittex luajittex language.def,language.dat.lua luatex.ini
++#! luajittex luajittex language.def,language.dat.lua luatex.ini
+ #
+ # from metafont:
+ mf mf-nowin - -translate-file=cp227.tcx mf.ini

packages/texlive/install-tl.list

@@ -0,0 +1,5 @@
+tlpkg/installer/config.guess
+tlpkg/gpg/pubring.gpg
+tlpkg/gpg/random_seed
+tlpkg/gpg/secring.gpg
+tlpkg/gpg/trustdb.gpg

packages/texlive/termux-install-tl.sh

@@ -1,65 +0,0 @@
-
-TL_VERSION=2017
-TL_ROOT=$PREFIX/opt/texlive
-
-export TMPDIR=$PREFIX/tmp/ 
-mkdir -p $TMPDIR/termux-tl-installer
-cd $TMPDIR/termux-tl-installer
-
-wget ftp://ftp.tug.org/texlive/historic/$TL_VERSION/install-tl-unx.tar.gz -O install-tl-unx.tar.gz
-tar xzfv install-tl-unx.tar.gz > flist
-
-cd $(head -1 flist) 
-
-#patch install-tl
-sed -E -i "s@\`/bin/sh@\`$PREFIX/bin/sh@g" tlpkg/TeXLive/TLUtils.pm 
-
-cat > texlive_inst.profile << XXHEREXX
-selected_scheme scheme-basic
-TEXDIR $TL_ROOT/$TL_VERSION
-TEXMFCONFIG ~/.texlive$TL_VERSION/texmf-config
-TEXMFHOME ~/texmf
-TEXMFLOCAL $TL_ROOT/texmf-local
-TEXMFSYSCONFIG $TL_ROOT/$TL_VERSION/texmf-config
-TEXMFSYSVAR $TL_ROOT/$TL_VERSION/texmf-var
-TEXMFVAR ~/.texlive$TL_VERSION/texmf-var
-collection-basic 1
-collection-latex 1
-collection-luatex 1
-instopt_adjustpath 0
-instopt_adjustrepo 1
-instopt_letter 0
-instopt_portable 0
-instopt_write18_restricted 1
-tlpdbopt_autobackup 1
-tlpdbopt_backupdir tlpkg/backups
-tlpdbopt_create_formats 1
-tlpdbopt_desktop_integration 0
-tlpdbopt_file_assocs 0
-tlpdbopt_generate_updmap 0
-tlpdbopt_install_docfiles 0
-tlpdbopt_install_srcfiles 0
-tlpdbopt_post_code 1
-tlpdbopt_sys_bin $PREFIX/bin
-tlpdbopt_sys_info $PREFIX/share/info
-tlpdbopt_sys_man $PREFIX/share/man
-tlpdbopt_w32_multi_user 0
-XXHEREXX
-
-#start installer with a profile and premade binaries
-perl ./install-tl --custom-bin=$TL_ROOT/${TL_VERSION}/bin/pkg --profile texlive_inst.profile 
-
-#fix tlpkg
-sed -E -i "s@\`/bin/sh@\`$PREFIX/bin/sh@g" ${TL_ROOT}/${TL_VERSION}/tlpkg/TeXLive/TLUtils.pm
-
-#fix shebangs
-sed -i -E "1 s@^#\!(.*)/[sx]?bin/(.*)@#\!$PREFIX/bin/\2@" ${TL_ROOT}/${TL_VERSION}/texmf-dist/web2c/*
-sed -i -E "1 s@^#\!(.*)/[sx]?bin/(.*)@#\!$PREFIX/bin/\2@" ${TL_ROOT}/${TL_VERSION}/bin/custom/*
-
-#source the environment
-. $PREFIX/etc/profile.d/texlive.sh 
-
-#setup links
-texlinks
-
-rm -rf $TMPDIR/termux-tl-installer

packages/texlive/texlive-extra.list

@@ -0,0 +1,36 @@
+tlpkg/tlpostcode/dvipdfmx.pl
+tlpkg/translations/cs.po
+tlpkg/translations/de.po
+tlpkg/translations/es.po
+tlpkg/translations/fr.po
+tlpkg/translations/it.po
+tlpkg/translations/ja.po
+tlpkg/translations/messages.pot
+tlpkg/translations/nl.po
+tlpkg/translations/pl.po
+tlpkg/translations/pt_BR.po
+tlpkg/translations/ru.po
+tlpkg/translations/sk.po
+tlpkg/translations/sl.po
+tlpkg/translations/sr.po
+tlpkg/translations/translators
+tlpkg/translations/uk.po
+tlpkg/translations/vi.po
+tlpkg/translations/zh_CN.po
+tlpkg/translations/zh_TW.po
+LICENSE.CTAN
+LICENSE.TL
+release-texlive.txt
+tlpkg/TeXLive/TLConfFile.pm
+tlpkg/TeXLive/TLConfig.pm
+tlpkg/TeXLive/TLCrypto.pm
+tlpkg/TeXLive/TLDownload.pm
+tlpkg/TeXLive/TLPDB.pm
+tlpkg/TeXLive/TLPOBJ.pm
+tlpkg/TeXLive/TLPSRC.pm
+tlpkg/TeXLive/TLPaper.pm
+tlpkg/TeXLive/TLTREE.pm
+tlpkg/TeXLive/TLUtils.pm
+tlpkg/TeXLive/TLWinGoo.pm
+tlpkg/TeXLive/TeXCatalogue.pm
+tlpkg/TeXLive/trans.pl