You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

201 lines
6.1 KiB

--- ../cache/MPD-0.20.6/doc/mpdconf.example 2017-03-10 15:57:59.000000000 +0000
+++ ./doc/mpdconf.example 2017-05-17 07:48:09.273191173 +0000
@@ -10,14 +10,14 @@
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
#
-#music_directory "~/music"
+music_directory "/sdcard/Music"
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#
-#playlist_directory "~/.mpd/playlists"
+playlist_directory "~/.mpd/playlists"
#
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
@@ -25,7 +25,7 @@
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
#
-#db_file "~/.mpd/database"
+db_file "~/.mpd/database"
#
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
@@ -34,25 +34,25 @@
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#
-#log_file "~/.mpd/log"
+#log_file "/data/data/com.termux/files/home/.mpd/log"
#
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#
-#pid_file "~/.mpd/pid"
+pid_file "~/.mpd/pid"
#
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
#
-#state_file "~/.mpd/state"
+state_file "~/.mpd/state"
#
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#
-#sticker_file "~/.mpd/sticker.sql"
+sticker_file "~/.mpd/sticker.sql"
#
###############################################################################
@@ -77,17 +77,18 @@
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon. Not effective if
# systemd socket activiation is in use.
-#
+# For local connections only
+#bind_to_address "localhost"
# For network
#bind_to_address "any"
#
# And for Unix Socket
-#bind_to_address "~/.mpd/socket"
+bind_to_address "/data/data/com.termux/files/usr/tmp/mpd.socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
-# to.
+# to. Normally this is 6600 but for termux this port needs to be above 8000.
#
-#port "6600"
+#port "8600"
#
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
@@ -137,12 +138,12 @@
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#
-#follow_outside_symlinks "yes"
+follow_outside_symlinks "yes"
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#
-#follow_inside_symlinks "yes"
+follow_inside_symlinks "yes"
#
###############################################################################
@@ -205,28 +206,6 @@
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
-# An example of an ALSA output:
-#
-#audio_output {
-# type "alsa"
-# name "My ALSA Device"
-## device "hw:0,0" # optional
-## mixer_type "hardware" # optional
-## mixer_device "default" # optional
-## mixer_control "PCM" # optional
-## mixer_index "0" # optional
-#}
-#
-# An example of an OSS output:
-#
-#audio_output {
-# type "oss"
-# name "My OSS Device"
-## device "/dev/dsp" # optional
-## mixer_type "hardware" # optional
-## mixer_device "/dev/mixer" # optional
-## mixer_control "PCM" # optional
-#}
#
# An example of a shout output (for streaming to Icecast):
#
@@ -257,7 +236,8 @@
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
-# path "/var/lib/mpd/recorder/mpd.ogg"
+## for termux changed "path" to somewhere on android that works
+# path "~/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
@@ -286,41 +266,34 @@
## sink "remote_server_sink" # optional
#}
#
-# An example of a winmm output (Windows multimedia API).
-#
-#audio_output {
-# type "winmm"
-# name "My WinMM output"
-## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-# or
-## device "0" # optional
-## mixer_type "hardware" # optional
-#}
+
+# An example of an opensl android output.
+audio_output {
+ type "sles"
+ name "OpenSLES output"
+ mixer_type "software"
+}
+
#
# An example of an openal output.
#
-#audio_output {
-# type "openal"
-# name "My OpenAL output"
-## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-#}
-#
-# An example of an sndio output.
-#
-#audio_output {
-# type "sndio"
-# name "sndio output"
-# mixer_type "software"
-#}
-#
-# An example of an OS X output:
+audio_output {
+ type "openal"
+ name "OpenAL output"
+ mixer_type "software"
+ device "OpenSL"
+ enabled "no"
+}
+#Fifo output for visualizations in ncmpcpp-git
+ audio_output {
+ type "fifo"
+ name "ncmpcpp visualizer"
+ path "~/../usr/tmp/mpd.fifo"
+ format "44100:16:1"
+ enabled "no"
+}
+
#
-#audio_output {
-# type "osx"
-# name "My OS X Device"
-## device "Built-in Output" # optional
-## channel_map "-1,-1,0,1" # optional
-#}
#
## Example "pipe" output:
#