Merge branch 'master' into dPoW

README.md

@@ -145,15 +145,19 @@ mv ~/.komodo ~/.komodo.old && mkdir ~/.komodo && cp ~/.komodo.old/komodo.conf ~/
 komodod now has jumblr_deposit and jumblr_secret RPC calls. 
 Jumblr works like described previously where all the nodes with jumblr active synchronize their tx activity during the same block to maximize the mixing effect. However, unlike all other mixers/tumblers, you never give up control of your coins to anybody else. JUMBLR uses a one to many allocation of funds, ie. one deposit address and many secret addresses. You can always run multiple komodod daemons to get multiple active deposit addresses.
 JUMBLR implements t -> z, z -> z and z -> t transactions to maximize privacy of the destination t (transparent) address. So while it is transparent, its first activity is funds coming from an untracable z address.
+
 Which of the three stages is done is randomly selected at each turn. Also when there is more than one possible transaction at the selected stage, a random one is selected. This randomization prevents analyzing incoming z ->t transactions by its size to correlate it to the originating address.
+
 jumblr_deposit <depositaddr> designates the deposit address as the jumblr deposit address for that session. You can select an address that already has funds in it and it will immediately start jumblr process. If there are no funds, it will wait until you send funds to it.
 There are three sizes of a jumblr transaction: 10 KMD, 100 KMD and 1000 KMD. There is also a fixed interval of blocks where all jumblr nodes are active. Currently it is set to be 10, but this is subject to change. Only during every 10*10 blocks are the largest 1000 KMD transactions processed, so this concentrates all the large transactions every N*N blocks. 
 jumblr_secret <secretaddress> notifies JUMBLR where to send the final z -> t transactions. In order to allow larger accounts to obtain privacy, up to 777 secret addresses are supported. Whenever a z -> t stage is activated, a random secret address from the list of the then active secret addresses is selected.
 Practical Advice:
 Obtaining privacy used to be very difficult. JUMBLR makes it as simple as issuing two command line calls. Higher level layers can be added to help manage the addresses, ie. linking them at the passphrase level. Such matters are left to each implementation.
+
 Once obtained, it is very easy to lose all the privacy. With a single errant transaction that combines some previously used address and the secretaddress, well, the secretaddress is no longer so private.
 The advice is to setup a totally separate node!
 This might seem a bit drastic, but if you want to maintain privacy, it is best to make it look like all the transactions are coming from a different node. The easiest way for most people to do this is to actually have a different node.
+
 It can be a dedicated laptop (recommended) or a VPS (for smaller amounts) with a totally fresh komodod wallet. Generate an address on this wallet and use that as the jumblr_secret address on your main node. As the JUMBLR operates funds will teleport into your secret node's address. If you are careful and never use the same IP address for both your nodes, you will be able to maintain very good privacy. 
 Of course, don't send emails that link the two accounts together! Dont use secret address funds for home delivery purchases! Etc. There are many ways to lose the privacy, just think about what linkages can be dont at the IP and blockchain level and that should be a useful preparation.
 What if you have 100,000 KMD and you dont want others to know you are such a whale?

contrib/debian/changelog

@@ -1,4 +1,4 @@
-zcash (1.0.8) jessie; urgency=medium
+komodo (1.0.8) jessie; urgency=medium
 
   * 1.0.8 release.
 

contrib/debian/control

@@ -1,21 +1,21 @@
-Source: zcash
+Source: komodo
 Section: utils
 Priority: optional
 Maintainer: Zcash Company <team@z.cash>
-Homepage: https://z.cash
+Homepage: https://komodoplatform.com/
 Build-Depends: autoconf, automake, bsdmainutils, build-essential,
  git, g++-multilib, libc6-dev, libtool,
  m4, ncurses-dev, pkg-config, python,
  unzip, wget, zlib1g-dev
-Vcs-Git: https://github.com/zcash/zcash.git
+Vcs-Git: https://github.com/jl777/komodo
-Vcs-Browser: https://github.com/zcash/zcash
+Vcs-Browser: https://github.com/jl777/komodo
 
-Package: zcash
+Package: komodo
 Architecture: amd64
 Depends: ${shlibs:Depends}
 Description: HTTPS for money.
  Based on Bitcoin's code, it intends to offer a far higher standard
  of privacy and anonymity through a sophisticiated zero-knowledge
  proving scheme which preserves confidentiality of transaction metadata.
- This package provides the daemon, zcashd, and the CLI tool,
+ This package provides the daemon, komodod, and the CLI tool,
- zcash-cli, to interact with the daemon.
+ komodo-cli, to interact with the daemon.

depends/packages/libcurl.mk

@@ -3,6 +3,7 @@ $(package)_version=7.54.0
 $(package)_download_path=https://curl.haxx.se/download
 $(package)_file_name=curl-$($(package)_version).tar.gz
 $(package)_sha256_hash=a84b635941c74e26cce69dd817489bec687eb1f230e7d1897fc5b5f108b59adf
+
 $(package)_config_opts_linux=--disable-shared --enable-static --prefix=$(host_prefix)
 $(package)_config_opts_mingw32=--enable-mingw --disable-shared --enable-static --prefix=$(host_prefix) --host=x86_64-w64-mingw32
 $(package)_config_opts_darwin=--disable-shared --enable-static --prefix=$(host_prefix)
@@ -29,6 +30,7 @@ define $(package)_build_cmds
 endef
 endif
 
+
 define $(package)_stage_cmds
   $(MAKE) DESTDIR=$($(package)_staging_dir) install
 endef

src/Makefile.am

@@ -32,6 +32,7 @@ else
 LIBBITCOIN_SERVER=libbitcoin_server.a
 endif
 
+
 LIBBITCOIN_WALLET=libbitcoin_wallet.a
 LIBBITCOIN_COMMON=libbitcoin_common.a
 LIBBITCOIN_CLI=libbitcoin_cli.a

zcutil/build-debian-package.sh

@@ -5,8 +5,8 @@
 set -e
 set -x
 
-BUILD_PATH="/tmp/zcbuild"
+BUILD_PATH="/tmp/kmdbuild"
-PACKAGE_NAME="zcash"
+PACKAGE_NAME="komodo"
 SRC_PATH=`pwd`
 SRC_DEB=$SRC_PATH/contrib/debian
 SRC_DOC=$SRC_PATH/doc
@@ -17,7 +17,7 @@ if [ ! -d $BUILD_PATH ]; then
     mkdir $BUILD_PATH
 fi
 
-PACKAGE_VERSION=$($SRC_PATH/src/zcashd --version | grep version | cut -d' ' -f4 | tr -d v)
+PACKAGE_VERSION=$($SRC_PATH/src/komodod --version | grep version | cut -d' ' -f4 | tr -d v)
 BUILD_DIR="$BUILD_PATH/$PACKAGE_NAME-$PACKAGE_VERSION-amd64"
 
 if [ -d $BUILD_DIR ]; then
@@ -28,7 +28,7 @@ DEB_BIN=$BUILD_DIR/usr/bin
 DEB_CMP=$BUILD_DIR/usr/share/bash-completion/completions
 DEB_DOC=$BUILD_DIR/usr/share/doc/$PACKAGE_NAME
 DEB_MAN=$BUILD_DIR/usr/share/man/man1
-mkdir -p $BUILD_DIR/DEBIAN $DEB_CMP $DEB_BIN $DEB_DOC $DEB_MAN
+mkdir -p $BUILD_DIR/DEBIAN $DEB_BIN $DEB_DOC
 chmod 0755 -R $BUILD_DIR/*
 
 # Package maintainer scripts (currently empty)
@@ -37,32 +37,32 @@ chmod 0755 -R $BUILD_DIR/*
 #cp $SRC_DEB/preinst $BUILD_DIR/DEBIAN
 #cp $SRC_DEB/prerm $BUILD_DIR/DEBIAN
 # Copy binaries
-cp $SRC_PATH/src/zcashd $DEB_BIN
+cp $SRC_PATH/src/komodod $DEB_BIN
-cp $SRC_PATH/src/zcash-cli $DEB_BIN
+cp $SRC_PATH/src/komodo-cli $DEB_BIN
-cp $SRC_PATH/zcutil/fetch-params.sh $DEB_BIN/zcash-fetch-params
+cp $SRC_PATH/zcutil/fetch-params.sh $DEB_BIN/komodo-fetch-params
 # Copy docs
 cp $SRC_PATH/doc/release-notes/release-notes-1.0.0.md $DEB_DOC/changelog
 cp $SRC_DEB/changelog $DEB_DOC/changelog.Debian
 cp $SRC_DEB/copyright $DEB_DOC
 cp -r $SRC_DEB/examples $DEB_DOC
 # Copy manpages
-cp $SRC_DOC/man/zcashd.1 $DEB_MAN
+#cp $SRC_DOC/man/zcashd.1 $DEB_MAN
-cp $SRC_DOC/man/zcash-cli.1 $DEB_MAN
+#cp $SRC_DOC/man/zcash-cli.1 $DEB_MAN
-cp $SRC_DOC/man/zcash-fetch-params.1 $DEB_MAN
+#cp $SRC_DOC/man/zcash-fetch-params.1 $DEB_MAN
-# Copy bash completion files
+# Copy bash completion files TODO: fix them for komodo
-cp $SRC_PATH/contrib/bitcoind.bash-completion $DEB_CMP/zcashd
+#cp $SRC_PATH/contrib/bitcoind.bash-completion $DEB_CMP/komodod
-cp $SRC_PATH/contrib/bitcoin-cli.bash-completion $DEB_CMP/zcash-cli
+#cp $SRC_PATH/contrib/bitcoin-cli.bash-completion $DEB_CMP/komodod-cli
 # Gzip files
 gzip --best -n $DEB_DOC/changelog
 gzip --best -n $DEB_DOC/changelog.Debian
-gzip --best -n $DEB_MAN/zcashd.1
+#gzip --best -n $DEB_MAN/zcashd.1
-gzip --best -n $DEB_MAN/zcash-cli.1
+#gzip --best -n $DEB_MAN/zcash-cli.1
-gzip --best -n $DEB_MAN/zcash-fetch-params.1
+#gzip --best -n $DEB_MAN/zcash-fetch-params.1
 
 cd $SRC_PATH/contrib
 
 # Create the control file
-dpkg-shlibdeps $DEB_BIN/zcashd $DEB_BIN/zcash-cli
+dpkg-shlibdeps $DEB_BIN/komodod $DEB_BIN/komodo-cli
 dpkg-gencontrol -P$BUILD_DIR
 
 # Create the Debian package