You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

261 lines
10 KiB

# Reproducible builds for c-lightning
This document describes the steps involved to build c-lightning in a
reproducible way. Reproducible builds close the final gap in the lifecycle of
open-source projects by allowing maintainers to verify and certify that a
given binary was indeed produced by compiling an unmodified version of the
publicly available source. In particular the maintainer certifies that the
binary corresponds a) to the exact version of the and b) that no malicious
changes have been applied before or after the compilation.
c-lightning has provided a manifest of the binaries included in a release,
along with signatures from the maintainers since version 0.6.2.
The steps involved in creating reproducible builds are:
- Creation of a known environment in which to build the source code
- Removal of variance during the compilation (randomness, timestamps, etc)
- Packaging of binaries
- Creation of a manifest (`SHA256SUMS` file containing the crytographic
hashes of the binaries and packages)
- Signing of the manifest by maintainers and volunteers that have reproduced
the files in the manifest starting from the source.
The bulk of these operations is handled by the [`repro-build.sh`][script]
script, but some manual operations are required to setup the build
environment. Since a binary is built against platorm specific libraries we
also need to replicate the steps once for each OS distribution and
architecture, so the majority of this guide will describe how to set up those
starting from a minimal trusted base. This minimal trusted base in most cases
is the official installation medium from the OS provider.
Note: Since your signature certifies the integrity of the resulting binaries,
please familiarize youself with both the [`repro-build.sh`][script] script, as
well as with the setup instructions for the build environments before signing
anything.
[script]: https://github.com/ElementsProject/lightning/blob/master/tools/repro-build.sh
# Build Environment Setup
The build environments are a set of docker images that are created directly
from the installation mediums and repositories from the OS provider. The
following sections describe how to create those images. Don't worry, you only
have to create each image once and can then reuse the images for future
builds.
## Base image creation
Depending on the distribution that we want to build for the instructions to
create a base image can vary. In the following sections we discuss the
specific instructions for each distribution, whereas the instructions are
identical again once we have the base image.
### Debian / Ubuntu and derivative OSs
For operating systems derived from Debian we can use the `debootstrap` tool to
build a minimal OS image, that can then be transformed into a docker
image. The packages for the minimal OS image are directly downloaded from the
installation repositories operated by the OS provider.
We cannot really use the `debian` and `ubuntu` images from the docker hub,
mainly because it'd be yet another trusted third party, but it is also
complicated by the fact that the images have some of the packages updated. The
latter means that if we disable the `updates` and `security` repositories for
`apt` we find ourselves in a situation where we can't install any additional
packages (wrongly updated packages depending on the versions not available in
the non-updated repos).
The following will create that base image:
```bash
sudo debootstrap bionic bionic
sudo tar -C bionic -c . | sudo docker import - bionic
```
`bionic` in this case is the codename for Ubuntu 18.04 LTS. The following
table lists the codenames of distributions that we currently support:
| Distribution Version | Codename |
|----------------------|----------|
| Ubuntu 18.04 | bionic |
| Ubuntu 20.04 | focal |
Notice that you migh not have `debootstrap` manifests for versions newer than
your host OS. If one of the `debootstrap` command above complains about a
script not existing you might need to run `debootstrap` in a docker container
itself:
```bash
sudo docker run --rm -v $(pwd):/build ubuntu:20.04 \
bash -c "apt update && apt-get install -y debootstrap && debootstrap focal /build/focal"
sudo tar -C focal -c . | sudo docker import - focal
```
Verify that the image corresponds to our expectation and is runnable:
```bash
sudo docker run bionic cat /etc/lsb-release
```
Which should result in the following output for `bionic`:
```text
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04 LTS"
```
## Builder image setup
Once we have the clean base image we need to customize it to be able to build
c-lightning. This includes disabling the update repositories, downloading the
build dependencies and specifying the steps required to perform the build.
For this purpose we have a number of Dockerfiles in the
[`contrib/reprobuild`][repro-dir] directory that have the specific
instructions for each base image.
We can then build the builder image by calling `docker build` and passing it
the `Dockerfile`:
```bash
sudo docker build -t cl-repro-bionic - < Dockerfile.bionic
```
Since we pass the `Dockerfile` through `stdin` the build command will not
create a context, i.e., the current directory is not passed to `docker` and
it'll be independent of the currently checked out version. This also means
that you will be able to reuse the docker image for future builds, and don't
have to repeat this dance every time. Verifying the `Dockerfile` therefore is
sufficient to ensure that the resulting `cl-repro-<codename>` image is
reproducible.
The dockerfiles assume that the base image has the codename as its image name.
[repro-dir]: https://github.com/ElementsProject/lightning/tree/master/contrib/reprobuild
# Building using the builder image
Finally, after this rather lengthy setup we can perform the actual build. At
this point we have a container image that has been prepared to build
reproducibly. As you can see from the `Dockerfile` above we assume the source
git repository gets mounted as `/repo` in the docker container. The container
will clone the repository to an internal path, in order to keep the repository
clean, build the artifacts there, and then copy them back to
`/repo/release`. We can simply execute the following command inside the git
repository (remember to checkout the tag you are trying to build):
```bash
sudo docker run --rm -v $(pwd):/repo -ti cl-repro-bionic
```
The last few lines of output also contain the `sha256sum` hashes of all
artifacts, so if you're just verifying the build those are the lines that are
of interest to you:
```text
ee83cf4948228ab1f644dbd9d28541fd8ef7c453a3fec90462b08371a8686df8 /repo/release/clightning-v0.9.0rc1-Ubuntu-18.04.tar.xz
94bd77f400c332ac7571532c9f85b141a266941057e8fe1bfa04f054918d8c33 /repo/release/clightning-v0.9.0rc1.zip
```
Repeat this step for each distribution and each architecture you wish to
sign. Once all the binaries are in the `release/` subdirectory we can sign the
hashes:
# (Co-)Signing the release manifest
The release captain is in charge of creating the manifest, whereas
contributors and interested bystanders may contribute their signatures to
further increase trust in the binaries.
The release captain creates the manifest as follows:
```bash
cd release/
sha256sum *v0.9.0* > SHA256SUMS
gpg -sb --armor SHA256SUMS
```
Co-maintainers and contributors wishing to add their own signature verify that
the `SHA256SUMS` and `SHA256SUMS.asc` files created by the release captain
matches their binaries before also signing the manifest:
```bash
cd release/
gpg --verify SHA256SUMS.asc
sha256sum -c SHA256SUMS
cat SHA256SUMS | gpg -sb --armor > SHA256SUMS.new
```
Then send the resulting `SHA256SUMS.new` file to the release captain so it can
be merged with the other signatures into `SHASUMS.asc`.
# Verifying a reproducible build
You can verify the reproducible build in two ways:
- Repeating the entire reproducible build, making sure from scratch that the
binaries match. Just follow the instructions above for this.
- Verifying that the downloaded binaries match match the hashes in
`SHA256SUMS` and that the signatures in `SHA256SUMS.asc` are valid.
Assuming you have downloaded the binaries, the manifest and the signatures
into the same directory, you can verify the signatures with the following:
```bash
gpg --verify SHA256SUMS.asc
```
And you should see a list of messages like the following:
```text
gpg: assuming signed data in 'SHA256SUMS'
gpg: Signature made Fr 08 Mai 2020 07:46:38 CEST
gpg: using RSA key 15EE8D6CAB0E7F0CF999BFCBD9200E6CD1ADB8F1
gpg: Good signature from "Rusty Russell <rusty@rustcorp.com.au>" [full]
gpg: Signature made Fr 08 Mai 2020 12:30:10 CEST
gpg: using RSA key B7C4BE81184FC203D52C35C51416D83DC4F0E86D
gpg: Good signature from "Christian Decker <decker.christian@gmail.com>" [ultimate]
gpg: Signature made Fr 08 Mai 2020 21:35:28 CEST
gpg: using RSA key 30DE693AE0DE9E37B3E7EB6BBFF0F67810C1EED1
gpg: Good signature from "Lisa Neigut <niftynei@gmail.com>" [full]
```
If there are any issues `gpg` will print `Bad signature`, it might be because
the signatures in `SHA256SUMS.asc` do not match the `SHA256SUMS` file, and
could be the result of a filename change. Do not continue using the binaries,
and contact the maintainers, if this is not the case, a failure here means
that the verification failed.
Next we verify that the binaries match the ones in the manifest:
```bash
sha256sum -c SHA256SUMS
```
Producing output similar to the following:
```
sha256sum: clightning-v0.9.0-Fedora-28-amd64.tar.gz: No such file or directory
clightning-v0.9.0-Fedora-28-amd64.tar.gz: FAILED open or read
clightning-v0.9.0-Ubuntu-18.04.tar.xz: OK
clightning-v0.9.0.zip: OK
sha256sum: WARNING: 1 listed file could not be read
```
Notice that the two files we downloaded are marked as `OK`, but we're missing
one file. If you didn't download that file this is to be expected, and is
nothing to worry about. A failure to verify the hash would give a warning like
the following:
```text
sha256sum: WARNING: 1 computed checksum did NOT match
```
If both the signature verification and the manifest checksum verification
succeeded, then you have just successfully verified a reproducible build and,
assuming you trust the maintainers, are good to install and use the
binaries. Congratulations! 🎉🥳