The fetchinvoice and offers plugins disable themselves if the option
isn't enabled (it's enabled by default on EXPERIMENTAL_FEATURES).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `experimental-offers` enables fetch, payment and creation of (early draft) offers.
Don't include exp directly, use an ifdef in common/bolt12
(like we do for peer and onion wiregen files).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Our new "decode" command will also handle bolt11. We make a few cleanups:
1. Avoid type_to_string() in JSON, instead use format functions directly.
2. Don't need to escape description now that JSON core does that for us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids duplication of both logic and error-prone values, such as
the salt. Grouping all hsm encryption logic into a public API will also
allow us to fuzz it.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
Note that check-whitespace and check-bolt already do this, so we
can eliminate redundant lines in common/Makefile and bitcoin/Makefile.
We also include the plugin headers in ALL_C_HEADERS so they get
checked.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of a boutique message, use a "real" channel_announcement for
private channels (with fake sigs and pubkeys). This makes it far
easier for gossmap to handle local channels.
Backwards compatible update, since we update old stores.
We also fix devtools/dump-gossipstore to know about the tombstone markers.
Since we increment our channel_announce count for local channels now,
the stats in the tests changed too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's a few structs/wire calls that only exist under experimental features.
These were in a common file that was shared/used a bunch of places but
this causes problems. Here we move one of the problematic methods back
into `openingd`, as it's only used locally and then isolate the
references to the `witness_stack` in a new `common/psbt_internal` file.
This lets us remove the iff EXP_FEATURES inclusion switches in most of
the Makefiles.
It's now only needed by devtools/mkfunding, so include a reduced one
there, and this also means we remove tx_spending_utxos().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This removes the reservation cleanup at startup, too, now they're all
using 'reserved_til'.
This changes test_withdraw, since it asserted that outputs were marked
spent as soon as we broadcast a transaction: now they're reserved until
it's mined. Similarly, test_addfunds_from_block assumed we'd see funds
as soon as we broadcast the tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` now randomizes input and output order, not BIP69.
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The user supplies callbacks to do channel selection and comparison.
Note that this continues to map the entire network; not just to the
source, for use with random routing.
Benchmarks: (using current mainnet gossip store)
/devtools/route gossip-store-2020-07-27 all 03c981ed4ad15837f29a212dc8cf4b31f274105b7c95274a41449bf496ebd2fe10 | grep 'Time to find path'
With nothing (i.e. DEVELOPER build)
Averages 17ms
With -Og (i.e. standard non-DEVELOPER build)
Averages 14ms
With -O3 -flto:
Averages 4ms
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I went overboard on optimization. I am so sorry:
1. Squeezed channel min/max into 16 bits.
2. Uses mmap and leaves node_ids in the file.
3. Uses offsets instead of pointers where possible.
4. Uses custom free-list to allocate inside arrays.
5. Ignores our autogenerated marshalling code in favor of direct derefs.
6. Carefully aligns everything so we use minimal ram.
The result is that the current gossip_store:
- load time (-O3 -flto laptop): 40msec
- load time (-g laptop i.e. DEVELOPER=0): 60msec
- load time (-O0 laptop i.e. DEVELOPER=1): 110msec
- Total memory: 2.6MB:
- 1.5MB for the array of channels
- 512k for the channel htable to map scid -> channel.
- 320k for the node htable to map nodeid -> node.
- 192k for the array of channels inside each node
- 94k for the array of nodes
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
includes facilities for
- sorting psbt inputs by serial_id
- sorting psbt outputs by serial_id
- adding a serial_id
- getting a serial_id
- finding the diffset between two psbts
- adding a max_len to a psbt input
- getting a max_len from a psbt input
This prevents recompiling everything when you are changing just a doc, or
touching only one file among hundreds of sources, just because the
`gen_version.h` is changed, especially since only one source actually
depends on that header.
Since we now over-write the wally malloc/free functions, we need to do
so for tests as well. Here we pull up all of the common setup/teardown
logic into a separate place, and update the tests that use libwally to
use the new common_setup core
Changelog-None
common/onion is going to need to use this for the case where it finds a blinding
seed inside the TLV. But how it does ecdh is daemon-specific.
We already had this problem for devtools/gossipwith, which supplied a
special hsm_do_ecdh(). This just makes it more general.
So we create a generic ecdh() interface, with a specific implementation
which subdaemons and lightningd can use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch we used `int` for error codes. The problem with
`int` is that we try to pass it to/from wire and the size of `int` is
not defined by the standard. So a sender with 4-byte `int` would write
4 bytes to the wire and a receiver with 2-byte `int` (for example) would
read just 2 bytes from the wire.
To resolve this:
* Introduce an error code type with a known size:
`typedef s32 errcode_t`.
* Change all error code macros to constants of type `errcode_t`.
Constants also play better with gdb - it would visualize the name of
the constant instead of the numeric value.
* Change all functions that take error codes to take the new type
`errcode_t` instead of `int`.
* Introduce towire / fromwire functions to send / receive the newly added
type `errcode_t` and use it instead of `towire_int()`.
In addition:
* Remove the now unneeded `towire_int()`.
* Replace a hardcoded error code `-2` with a new constant
`INVOICE_EXPIRED_DURING_WAIT` (903).
Changelog-Changed: The waitinvoice command would now return error code 903 to designate that the invoice expired during wait, instead of the previous -2
I really want a type which means "I am a wrapped onion reply" as separate
from "I am a normal wire msg". Currently both user u8 *, and I got very
confused trying to figure out where each one was an unwrapped error msg,
or where it still needed (un)wrapping.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This uses the same state machine as HTLCs, but they're only
ever added, not removed. Since we can only have one in each
state, we use a simple array; mostly NULL.
We could make this more space-efficient by folding everything into the
first 5 states, but that would be more complex than just using the
identical state machine.
One subtlety: we don't send uncommitted fee_states over the wire.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now "raw_payload" is always the complete string (including realm or length
bytes at the front).
This has several effects:
1. We can receive an decrypt an onion which is grossly malformed.
2. We can still hand this to the htlc_accepted hook.
3. We then fail it unless the htlc_accepted accepts it manually.
4. The createonion API now takes the raw payload, and does not know
anything about "style".
The only caveat is that the sphinx code needs to know the payload
length: we have a call for that, which simply tells it to copy the
entire onion (and treat us as the final node) if it's invalid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to have a static Tor service created from a blob bound to
our node on cmdline
Changelog-added: persistent Tor address support
Changelog-added: allow the Tor inbound service port differ from 9735
Signed-off-by: Saibato <saibato.naga@pm.me>
Add base64 encode/decode to common
We need this to encode the blob for the tor service
Signed-off-by: Saibato <saibato.naga@pm.me>
This encoding scheme is no longer just used for short_channel_ids, so make
the names more generic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to need this for P2WSH scripts. pull it out into
a common file plus adopt the sanity checks so that it will allow for
either P2WSH or P2WPKH (previously only encoded P2WPKH scripts)
These are generalized from our internal implementations.
The main difference is that 'struct json_escaped' is now 'struct
json_escape', so we replace that immediately.
The difference between lightningd's json-writing ringbuffer and the
more generic ccan/json_out is that the latter has a better API and
handles escaping transparently if something slips through (though
it does offer direct accessors so you can mess things up yourself!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
niftynei
Antoine Poinsot
YOSHIDA Masanori
ZmnSCPxj jxPCSnmZ
Christian Decker
Vasil Dimov
Saibato