wallet/test/run-wallet was failing the valgrind check; turns out
`sqlite3_expanded_sql` expects you to manage the memory of strings
it returns. from `sqlite3.h`:
** ^The string returned by sqlite3_expanded_sql(P), on the other hand,
** is obtained from [sqlite3_malloc()] and must be free by the application
** by passing it to [sqlite3_free()].
on gcc (GCC) 7.4.0
devtools/create-gossipstore.c: In function ‘load_scid_file’:
devtools/create-gossipstore.c:22:9: error: ignoring return value of ‘fscanf’ ...
fscanf(scidfd, "%d\n", &n);
^~~~~~~~~~~~~~~~~~~~~~~~~~
devtools/create-gossipstore.c:24:9: error: ignoring return value of ‘fscanf’ ...
fscanf(scidfd, "%s\n", title);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [<builtin>: devtools/create-gossipstore.o] Error 1
Signed-off-by: William Casarin <jb55@jb55.com>
on gcc (GCC) 7.4.0
devtools/create-gossipstore.c: In function ‘main’:
devtools/create-gossipstore.c:107:9: error: ‘infd’ may be used uninitialized ..
while (read_all(infd, &be_inlen, sizeof(be_inlen))) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: William Casarin <jb55@jb55.com>
They don't clean up after themselves, so best we do it here (by this
point we've already done the pid check to make sure we're the only
lightningd here anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's supposed to be `--bind-addr=/socket` since you can't advertize a
local address, but the parser accepts `--addr=` too, and the intent is
clear.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, the assert when `--addr=/sockname` is used, and that it
doesn't clean up on restart, requiring manual deletion of the socket.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Outputs CSV. We add some stats for load times in developer mode, so we can
easily read them out.
peer_read_all_sec doesn't work, since we seem to reject about half the
updates for having bad signatures. It's also very slow...
routing fails, for unknown reasons, so that failure is ignored in routing_sec.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
39275-44779(40466.8+/-2.2e+03),2899248,41.010000-44.970000(41.972+/-1.5),2.280000-2.350000(2.304+/-0.025),49.770000-63.390000(59.178+/-5),33.310000-34.260000(33.62+/-0.35),42.100000-44.080000(43.082+/-0.67)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_tools-bench-gossipd.sh__rough_benchmark_for_gossipd_and_the_million_channels_project-2.patch':
fixup! tools/bench-gossipd.sh: rough benchmark for gossipd and the million channels project
Suggested-by: @niftynei
Header from folded patch 'fixup!_tools-bench-gossipd.sh__rough_benchmark_for_gossipd_and_the_million_channels_project-1.patch':
fixup! tools/bench-gossipd.sh: rough benchmark for gossipd and the million channels project
MCP filename change.
Header from folded patch 'tools-bench-gossipd.sh__dont_print_csv_by_default.patch':
tools/bench-gossipd.sh: don't print CSV by default.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_tools-bench-gossipd.sh__rough_benchmark_for_gossipd_and_the_million_channels_project.patch':
fixup! tools/bench-gossipd.sh: rough benchmark for gossipd and the million channels project
Make shellcheck happy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either private or simply not enough confirms. They would have been added
on reconnect, but that's not ideal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Adding a giant IO message simply causes it to be pruned immediately,
so truncate it if it's more than 1/64 the max size.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This causes natural batching, rather than on every little addition of
JSON formatting.
Before, to listchannels 100,000 channels took 82.48 seconds, after
6.82 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets us benchmark without a valid blockchain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_gossipd__dev_option_to_allow_unknown_channels.patch':
fixup! gossipd: dev option to allow unknown channels.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We push a huge msg for listchannels with the million-channels project.
We need to fix that, but this works around it so we can benchmark.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For giant nodes, it seems we spend a lot of time memmoving this array.
Normally we'd go for a linked list, but that's actually hard: each
channel has two nodes, so needs two embedded list pointers, and when
iterating there's no good way to figure out which embedded pointer
we'd be using.
So we (ab)use htable; we don't really need an index, but it's good for
cache-friendly iteration (our main operation). We can actually change
to a hybrid later to avoid the extra allocation for small nodes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In theory we could allow a db_write-using plugin to have other
hooks/commands by embargoing their other responses until the exclusive
period is over. That would be nice for a 'dbmirrorinfo' command, for
example.
The other option would be to *always* go exclusive on a db_write-using
plugin, so responses can never get intermingled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I started by trying to change the current infrastructure, but this is
really the only completely sync hook which makes sense; it needs to avoid
doing the db_transation, as well as waiting, and using a callback is just
overkill.
So with some regret, I open coded it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I was tempted to create a new db_select_stmt wrapper type, but that means
a lot of boilerplate around binding, which expects to work with db_prepare
*and* db_select_prepare.
This lets us clearly differentiate between db queries (which don't need to
go to a plugin) and db changes (which do).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
fixup printing methods in devtools/decodemsg such that TLV's can
now be printed as well. here's how you'd use it:
$ ./devtools/decodemsg --tlv opening_tlv 0120001E020202020202020202020202020202020202020202020202020202020202
> WIRE_OPTION_UPFRONT_SHUTDOWN_SCRIPT (size 32):
> shutdown_scriptpubkey=[020202020202020202020202020202020202020202020202020202020202]
This is what all of this has been working towards: ripping out the handwoven
transaction handling. By removing the custom parsing we can finally switch
over to using `wally_tx` as sole representation of transactions in
memory. The commit is a bit larger but it's mostly removing setters and old
references to the input and output fields.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Weaning `onchaind` off its use of the internal bitcoin_tx input and output
fields, since we're going to remove them soon, I promise.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These are handled internally in the `wally_tx` and do not conform to our usual
tallocated strings that can by inspected using `tal_bytelen`, and we don't
really want to litter our code with whitelisting comments for the
`amount_sat.satoshis` access, so these just do read-only on the fly conversions.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the second to last time I'm touching this file, just need to remove
the `tx->input` and `tx->output` swapping once they are removed.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Michael Schmoock
lisa neigut
William Casarin
Rusty Russell
darosior
Joe Netti
Christian Decker