1. l1 update_fee -> l2
2. l1 commitment_signed -> l2 (using new feerate)
3. l1 <- revoke_and_ack l2
4. l1 <- commitment_signed l2 (using new feerate)
5. l1 -> revoke_and_ack l2
When we break the connection after #3, the reconnection causes #4 to
be retransmitted, but it turns out l1 wasn't telling the master to set
the local feerate until it received the commitment_signed, so on
reconnect it uses the old feerate, with predictable results (bad
signature).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Useful it we want to intercept bitcoin-cli first.
We move the getinfo() caching into start(), as that's when we can actually
use RPC.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to use it to override specific commands. It's non-valgrinded
already since we use '--trace-children-skip=*bitcoin-cli*' so the overhead
should be minimal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We got an index error, because status had only one field (onchaind not
started yet).
> wait_for(lambda: only_one(p.rpc.listpeers(l1.info['id'])['peers'][0]['channels'])['status'][1] == 'ONCHAIN:Tracking mutual close transaction')
E IndexError: list index out of range1
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Normal wallet txs get reconfirmed as blocks come in, but ones which need
closeinfo are more fragile, so we do it manually using txwatch for them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In one case, the channel_update which we expected to activate the channel
from l2 was suppressed as redundant. This is certainly valid, so just
check the results.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Waiting for three node_announcments isn't always enough, since l2 can
publish two of them (an independent bug). Do the more Right Thing and
just wait for 30 seconds of no input...
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. connect convenience variable for improved readabilty.
2. a comment explaining that timer is on channel, not HTLC.
3. use modern python style in test_htlc_send_timeout
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now sending a ping makes sense: it should force the other end to send
a reply, unblocking the commitment process.
Note that rather than waiting for a reply, we're actually spinning on
a 100ms loop in this case. But it's simple and it works.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently, if we don't realize a TCP connection is down, we almost
certainly don't find out until *after* we're sent the
commitment_signed message, in which case we cannot fail the incoming
HTLC.
This test demonstrates that. Note the 30 second sleep: we should really
run Travis tests in parallel!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we have an address hint, we start with that, but we'll use
node_announcement information if required.
Note: we (ab)use the address hint when restoring from the database
or reconnecting, even if the connection was *incoming*. That meant
that the recipient of a connection would *never* manage to connect out.
We still don't take multiple addresses from the DNS seeds: I assume we
should, since there could be IPv4 and IPv6.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd tells master about every disconnection, and master knows
whether it's important to reconnect. Just get the master to invoke a new
connect command if it considers the peer important!
The only twist is timeouts: we don't want to immediately reconnect if
we've failed to connect. To solve this, connectd passes a 'delaytime'
to the master when a connection fails, and the master passes it back
when it asks for a connection.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, all opening_read_peer_msg() callers need to know there
was an error (presumably, negotiating) so they can stop, but we should
not exit.
This lets us reenable the final disabled test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now simply maintain a pubkey set for connected peers (we only care
if there's a reconnect), not the entire peer structure.
lightningd no longer queries us for getpeers: it knows more than we do
already.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's now a potential race: the source peer connect returns, but in
destination peer the master hasn't read the connect message from
connectd, so the peer isn't in listpeers yet.
(Previously the connection stayed in connectd, so there was no such
window).
This is an occasional issue in a few places.
Note that we take the opportunity to speed up test_disconnectpeer too
while we're there.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Prior to this, lightningd would hand uninteresting peers back to connectd,
which would then return it to lightningd if it sent a non-gossip msg,
or if lightningd asked it to release the peer.
Now connectd hands the peer to lightningd once we've done the init
handshake, which hands it off to openingd.
This is a deep structural change, so we do the minimum here and cleanup
in the following patches.
Lightningd:
1. Remove peer_nongossip handling from connect_control and peer_control.
2. Remove list of outstanding fundchannel command; it was only needed to
find the race between us asking connectd to release the peer and it
reconnecting.
3. We can no longer tell if the remote end has started trying to fund a
channel (until it has succeeded): it's very transitory anyway so not
worth fixing.
4. We now always have a struct peer, and allocate an uncommitted_channel
for it, though it may never be used if neither end funds a channel.
5. We start funding on messages for openingd: we can get a funder_reply
or a fundee, or an error in response to our request to fund a channel.
so we handle all of them.
6. A new peer_start_openingd() is called after connectd hands us a peer.
7. json_fund_channel just looks through local peers; there are none
hidden in connectd any more.
8. We sometimes start a new openingd just to send an error message.
Openingd:
1. We always have information we need to accept them funding a channel (in
the init message).
2. We have to listen for three fds: peer, gossip and master, so we opencode
the poll.
3. We have an explicit message to start trying to fund a channel.
4. We can be told to send a message in our init message.
Testing:
1. We don't handle some things gracefully yet, so two tests are disabled.
2. 'hand_back_peer .*: now local again' from connectd is no longer a message,
openingd says 'Handed peer, entering loop' once its managing it.
3. peer['state'] used to be set to 'GOSSIPING' (otherwise this field doesn't
exist; 'state' is now per-channel. It doesn't exist at all now.
4. Some tests now need to turn on IO logging in openingd, not connectd.
5. There's a gap between connecting on one node and having connectd on
the peer hand over the connection to openingd. Our tests sometimes
checked getpeers() on the peer, and didn't see anything, so line_graph
needed updating.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, I found lightning_openingd processes after running
tests. When we use the dev_disconnect blackhole '0' option, they
stick around until the dev_disconnect file is truncated (there is only
so much you can do with only a file descriptor), so let's do that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The following changes revealed this race, where expecting listchannels()
to contain two channels immediately after fund_channel() was racy.
We also derive the short_channel_id first, so we can search logs for the
exact messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The next patches get better at reconecting, so if we use dev-allow-localhost
nodes can often find each other and reconnect before shutting down; only
use that option where we actually need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Saw this in Travis: technically we return from the dev_set_max_scids...
cmd after sending it to gossipd, but we should wait for it to log.
Adding an internal reply message for a dev command seems overkill.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. If the IPv6 address was public, that changed the wireaddr and thus the ipv4 bind
would not be to a wildcard and would fail.
2. Binding two fds to the same port on both wildcard IPv4 and IPv6 succeeds; we only
fail when we try to listen, so allow error at this point.
For some reason this triggered on my digital ocean machine.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
openingd calculates our reserve based on the channel amount (even if
we're funding, to keep the calculation in one place), but it wasn't
reporting it back to the master daemon. We initialized it to 0 so that
valgrind wouldn't get upset, as it's part of a structure we send over
the wire.
Have openingd report back, and also initialize it to an impossible value
as extra assurance. And remove a stray (harmless but weird) semicolon.
Reported-by: Gálli Zoltán
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Christian Decker