We still close the channel if we *send* an error, but we seem to have hit
another case where LND sends an error which seems transient, so this will
make a best-effort attempt to preserve our channel in that case.
Some test have to be modified, since they don't terminate as they did
previously :(
Changelog-Changed: quirks: We'll now reconnect and retry if we get an error on an established channel. This works around lnd sending error messages that may be non-fatal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Spaces just make life a little harder for everyone.
(Plus, fix documentation: it's 'jsonrpc' not 'json' subsystem).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A log can have a default node_id, which can be overridden on a per-entry
basis. This changes the format of logging, so some tests need rework.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were checking against hardcoded hrp and prefixes. Now we parametrize via
the chainparams.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was weird right from the start, so we just split the table into integers
and blobs, so each column has a well-defined format. It is also required for
postgres not to cry about explicit casts in the `paramTypes` array.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
It's generally clearer to have simple hardcoded numbers with an
#if DEVELOPER around it, than apparent variables which aren't, really.
Interestingly, our pruning test was always kinda broken: we have to pass
two cycles, since l2 will refresh the channel once to avoid pruning.
Do the more obvious thing, and cut the network in half and check that
l1 and l3 time out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
VALGRIND=1, SLOW_MACHINE=0:
Before: 197.74 seconds
After: 135.43 seconds
Note that we now spend about 13 seconds in teardown, could probably
be optimized.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If l2 doesn't think we're onchain yet, it treats the new connection from l1
as a reconnection, triggering 'ValueError: 1 nodes had unexpected reconnections'
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to change the API, so this makes the tests still work
across the transition (and, as a bonus, tests our backwards compat
shim).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And clean up some dev ones which actually happen (mainly by calling
channel_fail_permanent which logs UNUSUAL, rather than
channel_internal_error which logs BROKEN).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Because the call (wallet_extract_owned outputs) that prints that line can happen
_before_ or _after_ confirmation in block, adding `CONFIRMED` in the later.
make it a bit easier to track mutual channel closures by
adding broadcast txid to the listpeers billboard.
since lightningd manages the 'identity' of the closing tx we need
to send it back to closingd so it can update the billboard
appropriately.
In particular this matches the case of `their_unilateral/to_us` outputs, which
were missing their addresses so far.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We want to disallow using unconfirmed outputs by default, so making the
default 1 confirmation seems a good idea. This also matches `bitcoind`s
minimum confirmation requirement.
Arming however breaks some of our tests, so I used `minconf=0` for the
breaking tests and added a new test specifically for the `minconf` parameter
for `fundchannel`.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is based on Christian's change, but removes all trace of the old codes.
I've proposed another spec change which removes this code altogether:
https://github.com/lightningnetwork/lightning-rfc/pull/544
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Rusty Russell <@rustyrussell>
We no longer use `dev-override-fees` to set the fees, rather we
instrument the `bitcoind` proxy to return the desired feerates.
Signed-off-by: Christian Decker <@cdecker>
In one case we can reduce, in the others we eliminated if VALGRIND.
Here are the ten slowest tests on my laptop:
469.75s call tests/test_closing.py::test_closing_torture
243.61s call tests/test_closing.py::test_onchain_multihtlc_our_unilateral
222.73s call tests/test_closing.py::test_onchain_multihtlc_their_unilateral
217.80s call tests/test_closing.py::test_closing_different_fees
146.14s call tests/test_connection.py::test_dataloss_protection
138.93s call tests/test_connection.py::test_restart_many_payments
129.66s call tests/test_gossip.py::test_gossip_persistence
128.73s call tests/test_connection.py::test_no_fee_estimate
122.46s call tests/test_misc.py::test_htlc_send_timeout
118.79s call tests/test_closing.py::test_onchain_dust_out
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
generate was deprecated some time ago, so we added the generate_block()
helper. But many calls crept back in, and git master refuses it.
(test_blockchaintrack relied on the return value, so make generate_block
return the list of blocks).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After Ubuntu 18.10 upgrade, lots of new flake8 warnings.
$ flake8 --version:
3.5.0 (mccabe: 0.6.1, pycodestyle: 2.4.0, pyflakes: 1.6.0) CPython 3.6.7rc1 on Linux
Note it seems that W503 warned about line breaks before binary
operators, and W504 complains about them after. I prefer W504, so
disable W503.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we have multiple HTLCs with the same preimage and the same CLTV,
it doesn't matter what order we treat them (they're literally
identical). But when we offer HTLCs with the same preimage but
different CLTVs, the commitment tx outputs look identical, but the
HTLC txs are different: if we simply take the first HTLC which matches
(and that's not the right one), the HTLC signature we got from them
won't match. As we rely on the signature matching to detect the fee
paid, we get:
onchaind: STATUS_FAIL_INTERNAL_ERROR: grind_fee failed
So we alter match_htlc_output() to return an array of all matching
HTLC indices, which can have more than one entry for offered HTLCs.
If it's our commitment, we loop through until one of the HTLC
signatures matches. If it's their commitment, we choose the HTLC with
the largest CLTV: we're going to ignore it once that hits anyway, so
this is the most conservative approach. If it's a penalty, it doesn't
matter since we steal all HTLC outputs the same independent of CLTV.
For accepted HTLCs, the CLTV value is encoded in the witness script,
so this confusion isn't possible. We nonetheless assert that the
CLTVs all match in that case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We set up HTLCs with the same preimage and both different and same
CLTVs in both directions, then make sure that onchaind is OK and that
the HTLCs are failed without causing downstream failure.
We do this for both our-unilateral and their-unilateral cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Create a second HTLC with a different CTLV but same preimage; onchaind
uses the wrong signature and fails to grind it.
Reported-by: molz (#c-lightning)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
My test case is a mainnet gossip store with 22107 channels, and
time to do `lightning-cli listchannels`:
Before: `lightning-cli listchannels` DEVELOPER=0
real 0m1.303000-1.324000(1.3114+/-0.0091)s
After:
real 0m0.629000-0.695000(0.64985+/-0.019)s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We extract the tx from the logs, and then we wait until that hits
the mempool. This is more reliable than 'sendrawtx' in the logs,
which might catch a previous sendrawtx; it's also more explicit
that we expect that tx exactly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Manipulate fees via fake-bitcoin-cli. It's not quite the same, as
these are pre-smoothing, so we need a restart to override that where
we really need an exact change. Or we can wait until it reaches a
certain value in cases we don't care about exact amounts.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't respond to fee changes until we're locked in: make sure we catch
up at that point.
Note that we use NORMAL fees during opening, but IMMEDIATE after, so
this often sends a fee update. The tests which break, we set those
feerates to be equal.
This (sometimes) changes the behavior of test_permfail, as we now
get an immediate commit, so that is fixed too so we always wait for
that to complete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a noop if we're opening a new channel (channel_fees_can_change(channel)
is false until funding locked in), but important if we're restarting.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Vasil Dimov
Christian Decker
Rusty Russell
trueptolemy
lisa neigut
Simon Vrouwe
Jan Sarenik