Now that Buffers instantiate the Uint8Array in JS the error message has
changed in case the allocation fails due to OOM. Tests have been updated
to match.
PR-URL: https://github.com/nodejs/node/pull/2915
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Most calls to ref() and unref() are chainable, timers should be
chainable, too.
Typical use:
var to = setTimeout(ontimeout, 123).unref();
PR-URL: https://github.com/nodejs/node/pull/2905
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trevor Norris <trevnorris@nodejs.org>
These are the core changes that allow AIX to compile. There
are still some test failures as there are some patches needed for
libuv and npm that we'll need to contribute through those
communities but this set allows node to be built on AIX and
pass most of the core tests
The change in js2c is because AIX does not support $ in
identifier names. See the discussion/agreement in
https://github.com/nodejs/node/issues/2272
PR-URL: https://github.com/nodejs/node/pull/2364
Reviewed-By: Ben Noordhuis <ben@strongloop.com>
Reviewed-By: Rod Vagg <r@va.gg>
Socket resume may happen on a next tick, and in following scenario:
1. `socket.resume()`
2. `socket._handle.close()`
3. `socket._handle = null;`
The `_resume` will be invoked with empty `._handle` property. There is
nothing bad about it, and we should just ignore the `resume`/`pause`
events in this case.
Same applies to the unconsuming of socket on adding `data` and/or
`readable` event listeners.
Fix: https://github.com/nodejs/node/issues/2821
PR-URL: https://github.com/nodejs/node/pull/2824
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Per the discussion on #2471, the JS symbols checked for by this test
were occasionally too deep in the stack and were being ignored by the
tick processor.
I have addressed this by increasing the stack depth inspected by the
tick processor and looking for the eval symbol which is more likely
to be present. Additional flakiness was caused by occasional misses
of the code creation event for the JS function being executed. I now
have separate code snippets to test for JS and C++ symbols and if
the code creation event is missed for the JS symbol test then I check
for a percentage of UNKNOWN symbols in processed output. This is
considered a success as the processing scripts in the node repository
are still correctly processing the ticks recieved from the v8
scripts. Further investigation is needed into the v8 profiling
scripts to determine why code creation events are being missed.
PR-URL: https://github.com/nodejs/node/pull/2694
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Previously, in _validateStdio we were using stdio.fd || stdio. If
stdio.fd was falsy (or 0 in the case of stdin), then the entire stdio
object would be passed which could cause a crash.
Fixes: https://github.com/nodejs/node/issues/2721
PR-URL: https://github.com/nodejs/node/pull/2727
Reviewed-By: silverwind - Roman Reiss <me@silverwind.io>
Reviewed-By: cjihrig - Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: indutny - Fedor Indutny <fedor.indutny@gmail.com>
The version used before returned -1 on truncation which does not conform
to the standard.
PR-URL: https://github.com/nodejs/node/pull/2404
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Long exception lines resulted in a stack buffer overflow or assertion
because it was assumed snprintf not counts discarded chars
or the assertion itself was incorrect: `(off) >= sizeof(arrow)`
PR-URL: https://github.com/nodejs/node/pull/2404
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Fixes a regression that appeared with the new Buffer implementation in v3.
Without this change, calling the SlowBuffer constructor with something else
than a number would abort on the C++ side. This makes sure that the length
argument is coerced to number or is 0.
Fixes: https://github.com/nodejs/node/issues/2634
PR-URL: https://github.com/nodejs/node/pull/2635
Reviewed-By: trevnorris - Trevor Norris <trev.norris@gmail.com>
Reviewed-By: cjihrig - Colin Ihrig <cjihrig@gmail.com>
The list of Array properties needed to be updated to match the new ones added
in V8 4.5.
PR-URL: https://github.com/nodejs/node/pull/2509
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Now parts of our public and public-ish APIs fall back to old-style
listenerCount() if the emitter does not have a listenerCount function.
Fixes: https://github.com/nodejs/node/issues/2655
Refs: 8f58fb92ff
PR-URL: https://github.com/nodejs/node/pull/2661
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Port of joyent/node commits:
* e17c5a72b2
* 70dafa7b62
Pull over test-child-process-spawn-typeerror.js from v0.12, replacing
the existing test in master. The new test includes a broader set of
tests on the various arg choices and throws.
Reviewed-By: trevnorris - Trevor Norris <trevnorris@nodejs.org>
Reviewed-By: cjihrig - Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: thefourtheye - Sakthipriyan Vairamani
PR-URL: https://github.com/nodejs/node/pull/2667
Fixes: https://github.com/nodejs/node/issues/2515
Add an optional callback parameter to `ChildProcess.prototype.send()`
that is invoked when the message has been sent.
Juggle the control channel's reference count so that in-flight messages
keep the event loop (and therefore the process) alive until they have
been sent.
`ChildProcess.prototype.send()` and `process.send()` used to operate
synchronously but became asynchronous in commit libuv/libuv@393c1c5
("unix: set non-block mode in uv_{pipe,tcp,udp}_open"), which landed
in io.js in commit 07bd05b ("deps: update libuv to 1.2.1").
Fixes: https://github.com/nodejs/node/issues/760
PR-URL: https://github.com/nodejs/node/pull/2620
Reviewed-By: trevnorris - Trevor Norris <trev.norris@gmail.com>
Reviewed-By: jasnell - James M Snell <jasnell@gmail.com>
v8 will silently return an empty handle
which doesn't delete our data if string length is
above String::kMaxLength
Fixes: https://github.com/nodejs/node/issues/1374
PR-URL: https://github.com/nodejs/node/pull/2402
Reviewed-By: trevnorris - Trevor Norris <trev.norris@gmail.com>
Reviewed-By: indutny - Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: bnoordhuis - Ben Noordhuis <info@bnoordhuis.nl>
Amended by @rvagg to change author date from
"1970-08-16 16:09:02 +0200"
to
"2015-08-16 16:09:02 +0200"
as per discussion @ https://github.com/nodejs/node/issues/2713
This commit addresses most of the review comments in
https://github.com/nodejs/node/pull/2540, which are kept in this
separate commit so as to better preserve the prior two patches as they
landed in 0.12.
This commit:
- Fixes a bug with unrefActive timers and disposed domains.
- Fixes a bug with unrolling an unrefActive timer from another.
- Adds a test for both above bugs.
- Improves check logic, making it stricter, simpler, or both.
- Optimizes nicer with a smaller, separate function for the try/catch.
Fixes: https://github.com/nodejs/node-convergence-archive/issues/23
Ref: https://github.com/nodejs/node/issues/268
PR-URL: https://github.com/nodejs/node/pull/2540
Reviewed-By: bnoordhuis - Ben Noordhuis <info@bnoordhuis.nl>
Before this change, _unrefActive would keep the unrefList sorted when
adding a new timer.
Because _unrefActive is called extremely frequently, this linear scan
(O(n) at worse) would make _unrefActive show high in the list of
contributors when profiling CPU usage.
This commit changes _unrefActive so that it doesn't try to keep the
unrefList sorted. The insertion thus happens in constant time.
However, when a timer expires, unrefTimeout has to go through the whole
unrefList because it's not ordered anymore.
It is usually not large enough to have a significant impact on
performance because:
- Most of the time, the timers will be removed before unrefTimeout is
called because their users (sockets mainly) cancel them when an I/O
operation takes place.
- If they're not, it means that some I/O took a long time to happen, and
the initiator of subsequents I/O operations that would add more timers
has to wait for them to complete.
With this change, _unrefActive does not show as a significant
contributor in CPU profiling reports anymore.
Fixes: https://github.com/joyent/node/issues/8160
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Conflicts:
lib/timers.js
Fixes: https://github.com/nodejs/node-convergence-archive/issues/23
Ref: https://github.com/nodejs/node/issues/268
PR-URL: https://github.com/nodejs/node/pull/2540
Reviewed-By: bnoordhuis - Ben Noordhuis <info@bnoordhuis.nl>
Both pointer arguments to memcmp are defined as non-null
and compiler optimizes upon that.
PR-URL: https://github.com/nodejs/node/pull/2544
Reviewed-By: trevnorris - Trevor Norris <trev.norris@gmail.com>
Reviewed-By: thefourtheye - Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
String concatenation in the assert messages has drastic impact on test
runtime. Removal of these messages is unlikely to affect debugging if
any breaking changes are made.
Previous time to run:
$ time ./iojs test/parallel/test-stringbytes-external.js
real 0m2.321s
user 0m2.256s
sys 0m0.092s
With fix:
$ time ./iojs test/parallel/test-stringbytes-external.js
real 0m0.518s
user 0m0.508s
sys 0m0.008s
PR-URL: https://github.com/nodejs/node/pull/2544
Reviewed-By: trevnorris - Trevor Norris <trev.norris@gmail.com>
Reviewed-By: thefourtheye - Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
The test was failing after adding 'use strict' because the windows CI
uses the autocrlf option of git which converts \r into \r\n on checkout.
Refactored the test to not read itself anymore and create a temp file on
the fly instead to avoid this line-ending issue.
PR-URL: https://github.com/nodejs/node/pull/2494
Reviewed-By: Joao Reis <reis@janeasystems.com>
This test was using fixturesDir to create temp files to test. This
patch replaces that with tmpDir and uses `assert` module to test.
Also, this test has been moved to `parallel`, from `sequential` mode.
PR-URL: https://github.com/nodejs/node/pull/2583
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This reverts commit 6cd0e2664b.
This reverts commit 7a999a1376.
This reverts commit f337595441.
It turns out that on Windows, uv_pipe_getsockname() is a no-op for
client sockets. It slipped through testing because of a CI snafu.
PR-URL: https://github.com/nodejs/node/pull/2584
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Complements the existing net.Socket#remoteFamily property.
PR-URL: https://github.com/nodejs/node/pull/956
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
The implementation is a minor API change in that socket.address() now
returns a `{ address: '/path/to/socket' }` object, like it does for TCP
and UDP sockets. Before this commit, it returned `socket._pipeName`,
which is a string when present.
Change common.PIPE on Windows from '\\\\.\\pipe\\libuv-test' to
'\\\\?\\pipe\\libuv-test'. Windows converts the '.' to a '?' when
creating a named pipe, meaning that common.PIPE didn't match the
result from NtQueryInformationFile().
Fixes: https://github.com/nodejs/node/issues/954
PR-URL: https://github.com/nodejs/node/pull/956
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Refer: https://github.com/nodejs/io.js/issues/1543
When this test fails, it leaves dead processes in the system. This
patch makes sure that the child processes exit first, in case of
errors.
PR-URL: https://github.com/nodejs/node/pull/2206
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This poplulates the lists of flaky tests with tests that failed recently
in Jenkins.
PR-URL: https://github.com/nodejs/node/pull/2424
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: João Reis <reis@janeasystems.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Template configuration files for marking tests as flaky.
PR-URL: https://github.com/nodejs/node/pull/2424
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: João Reis <reis@janeasystems.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
There's a bunch of stuff in test-child-process-spawnsync.js that seems
designed to test that it is in fact blocking/synchronous. However, that
code really just tests the OS sleep command. Change `sleep 1` to `sleep
0` and shave about one second off the test run.`
We check the return status to confirm the command is successful. The
tests in this file in general would not work if spawnSync() were
asynchronous. That includes this one, as a return status would not be
available if the command where asynchronous.
PR-URL: https://github.com/nodejs/node/pull/2542
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The test had checked that a timer fired within a period after
spawnSync() returns. The result was a test that sometimes was
flaky.
Because there's no guarantee of how long a timer will take
before running, remove the check. There is a check that the
timer runs after spawnSync() so that is sufficient.
PR-URL: https://github.com/nodejs/node/pull/2535
Fixes: https://github.com/nodejs/node/issues/2470
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This refactoring:
* eliminates the need for the external `curl` command
* speeds the test by running the two test requests simultaneously
* checks the type of error in the test that expects a failure
(previously, any error type would cause the test to pass)
PR-URL: https://github.com/nodejs/node/pull/2433
Reviewed-By: Brendan Ashworth <brendan.ashworth@me.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
This commit replaces instances of io.js with Node.js, based on the
recent convergence. There are some remaining instances of io.js,
related to build and the installer.
Fixes: https://github.com/nodejs/node/issues/2361
PR-URL: https://github.com/nodejs/node/pull/2367
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: João Reis <reis@janeasystems.com>
This adds a new `--tls-cipher-list` command line switch
that can be used to override the built-in default cipher
list. The intent of this is to make it possible to enforce
an alternative default cipher list at the process level.
Overriding the default cipher list is still permitted at
the application level by changing the value of
`require('tls').DEFAULT_CIPHERS`.
As part of the change, the built in default list is moved
out of tls.js and into node_constants.h and node_constants.cc.
Two new constants are added to require('constants'):
* defaultCipherList (the active default cipher list)
* defaultCoreCipherList (the built-in default cipher list)
A test case and doc changes are included.
A new NODE_DEFINE_STRING_CONSTANT macro is also created in
node_internals.h
When node_constants is initialized, it will pick up either
the passed in command line switch or fallback to the default
built-in suite.
Within joyent/node, this change had originaly been wrapped
up with a number of other related commits involving the
removal of the RC4 cipher. This breaks out this isolated
change.
/cc @mhdawson, @misterdjules, @trevnorris, @indutny, @rvagg
Reviewed By: Ben Noordhuis <ben@strongloop.com>
PR-URL: https://github.com/nodejs/node/pull/2412
Refactored version of https://github.com/joyent/node/pull/25819
Removes integer keys (and keys starting with numbers) from
candidate list on repl tab complete. Refactored the originally
submitted change to simplify and ensure that the integer keys
do not show up on objects either.
Reviewed By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/2409
This resolvesjoyent/node#9272. `tlsSocket.getPeerCertificate` will
return an empty object when the peer does not provide a certificate,
but, prior to this, when the certificate is empty, `checkServerIdentity`
would throw because the `subject` wasn't present on the cert.
`checkServerIdentity` must return an error, not throw one, so this
returns an error when the cert is empty instead of throwing
a `TypeError`.
PR-URL: https://github.com/nodejs/node/pull/2343
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Reviewed-By: Shigeki Ohtsu <ohtsu@iij.ad.jp>
There is no way a line can be called after throwing an exception.
PR-URL: https://github.com/nodejs/node/pull/2289
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Brendan Ashworth <brendan.ashworth@me.com>
Previously 1000-1200ms, they're now (platform dependent) 50-100ms.
Improves test run time on my machine from 0m1.335s to 0m0.236s.
PR-URL: https://github.com/nodejs/node/pull/2429
Reviewed-By: Rich Trott <rtrott@gmail.com>
Previously the test had a massive timeout (3s!), reduce this to a
platform specific timeout of 50ms.
This test runs two servers at the same time in an attempt to compare
behaviour. I've added a check to make sure one event fires before the
other event, as is expected, but that is a possible race condition.
Improves test run time on my machine from 0m3.141s to 0m0.356s.
PR-URL: https://github.com/nodejs/node/pull/2429
Reviewed-By: Rich Trott <rtrott@gmail.com>
This includes the following changes:
- a more strict data check rather than a regex
- reduced number of annoying log calls
The most important of the changes is the annoying log calls, which
speeds up the test execution from about 0m1.130s to 0m0.481s on my
machine.
PR-URL: https://github.com/nodejs/node/pull/2429
Reviewed-By: Rich Trott <rtrott@gmail.com>
As per the discussion in #734, this patch deprecates the usage of
`EventEmitter.listenerCount` static function in the docs, and introduces
the `listenerCount` function in the prototype of `EventEmitter` itself.
PR-URL: https://github.com/nodejs/node/pull/2349
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
The test no longer waits about 5 seconds between callback invocations.
It now writes to the tmp directory rather than the fixtures directory.
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/2393
Errors might be injected into OpenSSL's error stack
without the return value of `PEM_read_bio_PrivateKey` being set to
`nullptr`. See the test of `test_bad_rsa_privkey.pem` for an
example.
PR-URL: https://github.com/nodejs/node/pull/2342
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Trevor Norris
Sam Roberts
Karl Skomski
Michael Dawson
Yazhong Liu
Fedor Indutny
Matt Loring
Evan Lucas
Karl Skomski
Michaël Zasso
Ali Ijaz Sheikh
Jeremiah Senkpiel
James M Snell
Ben Noordhuis
Julien Gilli
Rich Trott
Roman Reiss
Sakthipriyan Vairamani
Alexis Campailla
Bradley Meck
João Reis
cjihrig
Brendan Ashworth
Mike Atkins
P.S.V.R