This change is in preparation for lint-enforced brace style.
PR-URL: https://github.com/nodejs/node/pull/8348
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Guard against the call to write() inside pipe's ondata pushing more data
back onto the Readable, thus causing ondata to be called again.
This is fine but results in awaitDrain being increased more than once.
The problem with that is when the destination does drain, only a single
'drain' event is emitted, so awaitDrain in this case will never reach
zero and we end up with a permanently paused stream.
Fixes: https://github.com/nodejs/node/issues/7278
PR-URL: https://github.com/nodejs/node/pull/7292
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reset the `readableState.awaitDrain` counter after manual calls to
`.resume()`.
What might happen otherwise is that a slow consumer at the end of the
pipe could end up stalling the piping in the following scenario:
1. The writable stream indicates that its buffer is full.
2. This leads the readable stream to `pause()` and increase its
`awaitDrain` counter, which will be decreased by the writable’s next
`drain` event.
3. Something calls `.resume()` manually.
4. The readable continues to pipe to the writable, but once again
the writable stream indicates that the buffer is full.
5. The `awaitDrain` counter is thus increased again, but since it has
now been increased twice for a single piping destination, the next
`drain` event will not be able to reset `awaitDrain` to zero.
6. The pipe is stalled and no data is passed along anymore.
The solution in this commit is to reset the `awaitDrain` counter to
zero when `resume()` is called.
Fixes: https://github.com/nodejs/node/issues/7159
PR-URL: https://github.com/nodejs/node/pull/7160
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
In 68990948fe (https://github.com/nodejs/node/pull/2325),
the conditions for increasing `readableState.awaitDrain` when
writing to a piping destination returns false were changed so
that they could not actually be met, effectively leaving
`readableState.awaitDrain` with a constant value of 0.
This patch changes the conditions to testing whether the
stream for which `.write()` returned false is still a piping
destination, which was likely the intention of the original
patch.
Fixes: https://github.com/nodejs/node/issues/5820
Fixes: https://github.com/nodejs/node/issues/5257
PR-URL: https://github.com/nodejs/node/pull/6023
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
ReadableState has the resumeScheduled property that helps determine if
a stream should be resumed. It was not assigned in the constructor.
When stream.resume is called on a readable stream that is not flowing,
it is set to true. This changes the property map of the ReadableState
which can cause a deopt in onEofChunk and needMoreData.
PR-URL: https://github.com/nodejs/node/pull/4761
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Before this commit, it was possible to push a partial character
to a readable stream where it was decoded as an empty string and
then added to the internal buffer. This caused the stream to not
emit any data, even when the rest of the character bytes were pushed
separately, because of a non-zero length check of the first chunk in
the internal buffer.
Fixes: https://github.com/nodejs/node/issues/5223
PR-URL: https://github.com/nodejs/node/pull/5226
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
`lib/_stream_readable.js` contained three instances of `var`
declarations occurring twice in the same scope. Refactored to `const` or
`let` as appropriate.
PR-URL: https://github.com/nodejs/node/pull/4816
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Avoids doing a buffer.concat on the internal buffer
when that array has only a single thing in it.
Reviewed-By: Chris Dickinson <chris@neversaw.us>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/3300
The `events` module already exports `EventEmitter` constructor function
So, we don't have to use `events.EventEmitter` to access it.
Refer: https://github.com/nodejs/node/pull/2896
PR-URL: https://github.com/nodejs/node/pull/2921
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Michaël Zasso <mic.besace@gmail.com>
Now parts of our public and public-ish APIs fall back to old-style
listenerCount() if the emitter does not have a listenerCount function.
Fixes: https://github.com/nodejs/node/issues/2655
Refs: 8f58fb92ff
PR-URL: https://github.com/nodejs/node/pull/2661
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
roundUpToNextPowerOf2() does more than just rounding up to the next
power of two. Rename it to computeNewHighWaterMark().
PR-URL: https://github.com/nodejs/node/pull/2479
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Don't iterate over all 32 bits, use some hacker's delight bit twiddling
to compute the next power of two.
The logic can be reduced to `n = 1 << 32 - Math.clz32(n)` but then it
can't easily be backported to v2.x; Math.clz32() was added in V8 4.3.
PR-URL: https://github.com/nodejs/node/pull/2479
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
The high watermark is capped at 8 MB, not 128 MB like the comment
in lib/_stream_readable.js said.
PR-URL: https://github.com/nodejs/node/pull/2479
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
As per the discussion in #734, this patch deprecates the usage of
`EventEmitter.listenerCount` static function in the docs, and introduces
the `listenerCount` function in the prototype of `EventEmitter` itself.
PR-URL: https://github.com/nodejs/node/pull/2349
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Many of the util.is*() methods used to check data types
simply compare against a single value or the result of
typeof. This commit replaces calls to these methods with
equivalent checks. This commit does not touch calls to the
more complex methods (isRegExp(), isDate(), etc.).
Fixes: https://github.com/iojs/io.js/issues/607
PR-URL: https://github.com/iojs/io.js/pull/647
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This commit replaces a number of var statements throughout
the lib code with const statements.
PR-URL: https://github.com/iojs/io.js/pull/541
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The copyright and license notice is already in the LICENSE file. There
is no justifiable reason to also require that it be included in every
file, since the individual files are not individually distributed except
as part of the entire package.
Turn on strict mode for the files in the lib/ directory. It helps
catch bugs and can have a positive effect on performance.
PR-URL: https://github.com/node-forward/node/pull/64
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
net Sockets were calling read(0) to start reading, without
checking to see if they were paused first. This would result
in paused Socket objects keeping the event loop alive.
Fixes#8200
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
A streams1 stream will have its falsy values such as 0, false, or ""
eaten by the upgrade to streams2, even when objectMode is enabled.
Include test for said cases.
Reviewed-by: isaacs <i@izs.me>
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
A ReadableStream with a base64 StringDecoder backed by only
one or two bytes would fail to output its partial data before
ending. This fix adds a check to see if the `read` was triggered
by an internal `flow`, and if so, empties any remaining data.
fixes#7914.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Switch condition order to check for null before calling isNaN().
Also remove two unnecessary calls to isNaN() that are already
covered by calls to isFinite(). This commit targets v0.10, as
opposed to #7891, which targets master (suggested by
@bnoordhuis). Closes#7840.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Default highWaterMark is now set properly when using stream Duplex's
writableObjectMode and readableObjectMode options.
Added condition to the already existing split objectMode test to ensure
the highWaterMark is being set to the correct default value on both the
ReadableState and WritableState for readableObjectMode and
writableObjectMode.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
The [Stream documentation for .push](http://nodejs.org/api/stream.html#stream_readable_push_chunk_encoding)
explicitly states multiple times that null is a special cased value
that indicates the end of a stream. It is confusing and undocumented
that undefined *also* ends the stream, even though in object mode
there is a distinct and important difference.
The docs for Object-Mode also explicitly mention null as the *only*
special cased value, making no mention of undefined.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
This commit introduces `readableObjectMode` and
`writableObjectMode` options for Duplex streams.
This can be used mostly to make parsers and
serializers with Transform streams.
Also the docs section about stream state objects
is removed, because it is not relevant anymore.
The example from the section is remade to show
new options.
fixes#6284
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
In this situation:
writable.on('error', handler);
readable.pipe(writable);
writable.removeListener('error', handler);
writable.emit('error', new Error('boom'));
there is actually no error handler, but it doesn't throw, because of the
fix for stream.once('error', handler), in 23d92ec.
Note that simply reverting that change is not valid either, because
otherwise this will emit twice, being handled the first time, and then
throwing the second:
writable.once('error', handler);
readable.pipe(writable);
writable.emit('error', new Error('boom'));
Fix this with a horrible hack to make the stream pipe onerror handler
added before any other userland handlers, so that our handler is not
affected by adding or removing any userland handlers.
Closes#6007.
When a stream is flowing, and not in the middle of a sync read, and
the read buffer currently has a length of 0, we can just emit a 'data'
event rather than push it onto the array, emit 'readable', and then
automatically call read().
As it happens, this is quite a frequent occurrence! Making this change
brings the HTTP benchmarks back into a good place after the removal of
the .ondata/.onend socket kludge methods.
If an error listener is added to a stream using once() before it is
piped, it is invoked and removed during pipe() but before pipe() sees it
which causes it to be emitted again.
Fixes#4155#4978
This prevents the following sort of thing from being confusing:
```javascript
stream.on('data', function() { console.error('got data'); });
stream.pause(); // stop reading
// turns out no data is available
stream.push(null);
// Hand the stream to someone else, who does stuff...
setTimeout(function() {
// too late! 'end' is already emitted!
stream.on('end', function() { console.error('got end'); });
});
```
With this change, the `end` event is not emitted until you call `read()`
*past* the EOF null. So, a paused stream will not swallow the `end`
event and emit it before you `resume()` the stream.
Closes#5860
In streams2, there is an "old mode" for compatibility. Once switched
into this mode, there is no going back.
With this change, there is a "flowing mode" and a "paused mode". If you
add a data listener, then this will start the flow of data. However,
hitting the `pause()` method will switch *back* into a non-flowing mode,
where the `read()` method will pull data out.
Every time `read()` returns a data chunk, it also emits a `data` event.
In this way, a passive data listener can be added, and the stream passed
off to some other reader, for use with progress bars and the like.
There is no API change beyond this added flexibility.
In some cases, the http CONNECT/Upgrade API is unshifting an empty
bodyHead buffer onto the socket.
Normally, stream.unshift(chunk) does not set state.reading=false.
However, this check was not being done for the case when the chunk was
empty (either `''` or `Buffer(0)`), and as a result, it was causing the
socket to think that a read had completed, and to stop providing data.
This bug is not limited to http or web sockets, but rather would affect
any parser that unshifts data back onto the source stream without being
very careful to never unshift an empty chunk. Since the intent of
unshift is to *not* change the state.reading property, this is a bug.
Fixes#5557FixesLearnBoost/socket.io#1242
Pretty much everything assumes strings to be utf-8, but crypto
traditionally used binary strings, so we need to keep the default
that way until most users get off of that pattern.
Rich Trott
David Halls
Anna Henningsen
Evan Lucas
Brian White
Calvin Metcalf
Sakthipriyan Vairamani
Jeremiah Senkpiel
Ben Noordhuis
Roman Reiss
Yosuke Furukawa
Yazhong Liu
Trevor Norris
Sam Newman
cjihrig
isaacs
Chris Dickinson
James Halliday
Andrew Oppenlander
Fedor Indutny
Jonathan Reem
Vladimir Kurchatkin
Julian Gruber
Mathias Buus
Matthew Aynalem
Eran Hammer