Replace '...' as invalid hostname with '***', which will give a more
consisten error message on different systems. The hostname '...' returns
EAI_AGAIN on musl libc and EAI_NONAME on most other systems.
By changing the testcase we get same restult on all known platforms.
PR-URL: https://github.com/nodejs/node/pull/5099
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Guard against the call to write() inside pipe's ondata pushing more data
back onto the Readable, thus causing ondata to be called again.
This is fine but results in awaitDrain being increased more than once.
The problem with that is when the destination does drain, only a single
'drain' event is emitted, so awaitDrain in this case will never reach
zero and we end up with a permanently paused stream.
Fixes: https://github.com/nodejs/node/issues/7278
PR-URL: https://github.com/nodejs/node/pull/7292
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reset the `readableState.awaitDrain` counter after manual calls to
`.resume()`.
What might happen otherwise is that a slow consumer at the end of the
pipe could end up stalling the piping in the following scenario:
1. The writable stream indicates that its buffer is full.
2. This leads the readable stream to `pause()` and increase its
`awaitDrain` counter, which will be decreased by the writable’s next
`drain` event.
3. Something calls `.resume()` manually.
4. The readable continues to pipe to the writable, but once again
the writable stream indicates that the buffer is full.
5. The `awaitDrain` counter is thus increased again, but since it has
now been increased twice for a single piping destination, the next
`drain` event will not be able to reset `awaitDrain` to zero.
6. The pipe is stalled and no data is passed along anymore.
The solution in this commit is to reset the `awaitDrain` counter to
zero when `resume()` is called.
Fixes: https://github.com/nodejs/node/issues/7159
PR-URL: https://github.com/nodejs/node/pull/7160
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
In preparation for a lint rule enforcing function argument alignment,
adjust function arguments to be aligned.
PR-URL: https://github.com/nodejs/node/pull/7100
Refs: https://github.com/nodejs/node/pull/6390
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Imran Iqbal <imran@imraniqbal.org>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Ryan Graham <r.m.graham@gmail.com>
The only tests for `addMembership()` and `dropMembership()` (from the
`dgram` module) were in `test/internet` which means they almost never
get run. This adds checks in `test/parallel`.
PR-URL: https://github.com/nodejs/node/pull/6753
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Make sure that `catch-stdout-error` has written data before the
destination process exits.
Fixes: https://github.com/nodejs/node/issues/6791
PR-URL: https://github.com/nodejs/node/pull/6808
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Roman Klauke <romaaan.git@gmail.com>
Currently we are overwriting the entire env object of the child-process
spawned in `npm-test-install`. This commit alternatively clones the
`process.env` object and modifies it with the neccessary changes before
passing it the the spawned process.
Fixes: https://github.com/nodejs/node/issues/6736
PR-URL: https://github.com/nodejs/node/pull/6797
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
ESLint 2.9.0 fixes some bugs that resulted in minor issues not being
caught by ESLint 2.7.0. Update instances of our code that will be
flagged when we upgrade to ESLint 2.9.0.
PR-URL: https://github.com/nodejs/node/pull/6498
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Correct alignment on variable assignments that span multiple lines in
preparation for lint rule to enforce such alignment.
PR-URL: https://github.com/nodejs/node/pull/6869
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
The test is currently flaky and CI provides no real information because
the test times out rather than failing on an assertion. Add logging to
gather more information about the failure.
Refs: https://github.com/nodejs/node/issues/6754
PR-URL: https://github.com/nodejs/node/pull/6769
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
When the previous set of changes (bfff07b) it was possible to have the
context get garbage collected while sandbox was still live. We need to
tie the lifetime of the context to the lifetime of the sandbox.
This is a backport of #5786 to v5.x.
Ref: https://github.com/nodejs/node/pull/5786
PR-URL: https://github.com/nodejs/node/pull/5800
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
There were previously no tests where console.assert failed
PR-URL: https://github.com/nodejs/node/pull/6302
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
The test directory had linting for undefined variables disabled. It is
enabled everywhere else in the code base. Let's disable the fule for
individual lines in the handful of tests that use undefined variables.
PR-URL: https://github.com/nodejs/node/pull/6255
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Some vm tests are not in strict mode because they need to create and use
global variables. By using `global.foo` instead of just `foo`, we can
still enable strict mode.
PR-URL: https://github.com/nodejs/node/pull/6209
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Minwoo Jung <jmwsoft@gmail.com>
Only `test-stdin-from-file.js` has been modified so that the `stdin.txt`
is written in a temp directory instead of the `fixtures` directory.
PR-URL: https://github.com/nodejs/node/pull/6187
Reviewed-By: James M Snell <jasnell@gmail.com>
Wait for the data to be received by the socket before creating the
clean-up timer. This way, a possible (though unlikely) `ECONNRESET`
error can be avoided.
PR-URL: https://github.com/nodejs/node/pull/6166
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
The only test with modifications is `test-stdin-child-proc` that was
passing when it should not because the exit code of the child process
was not being checked.
PR-URL: https://github.com/nodejs/node/pull/6087
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Claudio Rodriguez <cjrodr@yahoo.com>
* use common.mustCall() to verify all tests have run
* eliminate unneeded removeTestFile()
* eliminate unneeded var leaking into global scope
* var -> const
* remove instance of let
PR-URL: https://github.com/nodejs/node/pull/6050
Reviewed-By: James M Snell <jasnell@gmail.com>
The last change to this test landed before a nit about strict mode was
addressed, so this change addresses that.
PR-URL: https://github.com/nodejs/node/pull/6047
Refs: https://github.com/nodejs/node/pull/6017
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Roman Klauke <romaaan.git@gmail.com>
When underlying `net.Socket` instance is consumed in http server - no
`data` events are emitted, and thus `socket.setTimeout` fires the
callback even if the data is constantly flowing into the socket.
Fix this by calling `socket._unrefTimer()` on every `onParserExecute`
call.
Fix: #5899
PR-URL: https://github.com/nodejs/node/pull/6286
Reviewed-By: James M Snell <jasnell@gmail.com>
Fix `buffer.indexOf` for the case that the haystack has odd length
and the needle is not found in it. `StringSearch()` would return
the length of the buffer in multiples of `sizeof(uint16_t)`, but
checking that against `haystack_length` would not work if the latter
one was odd.
PR-URL: https://github.com/nodejs/node/pull/6511
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Use `StringBytes::Size` to determine the needle string length
instead of assuming latin-1 or UTF-8.
Previously, `Buffer.indexOf` could fail with an assertion failure
when the needle's byte length, but not its character count,
exceeded the haystack's byte length.
PR-URL: https://github.com/nodejs/node/pull/6511
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Currently it is possible that the shelled out instance of npm will use
the system copy of node. This PR changes the test to shim the build
directory into the path. This will ensure that npm will use the correct
version of node.
fixes: https://github.com/nodejs/node/issues/6648
PR-URL: https://github.com/nodejs/node/pull/6658
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Remove timer to avoid the test timing out occasionally.
PR-URL: https://github.com/nodejs/node/pull/5676
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Claudio Rodriguez <cjrodr@yahoo.com>
Special handling to detect when user has supplied a custom message.
Added a test for user message.
When testing if `actual` value is an error use
`util.isError` instead of `instanceof`.
Fixes: https://github.com/nodejs/node/issues/2385
PR-URL: https://github.com/nodejs/node/pull/2407
Reviewed-By: James M Snell <jasnell@gmail.com>
In 68990948fe (https://github.com/nodejs/node/pull/2325),
the conditions for increasing `readableState.awaitDrain` when
writing to a piping destination returns false were changed so
that they could not actually be met, effectively leaving
`readableState.awaitDrain` with a constant value of 0.
This patch changes the conditions to testing whether the
stream for which `.write()` returned false is still a piping
destination, which was likely the intention of the original
patch.
Fixes: https://github.com/nodejs/node/issues/5820
Fixes: https://github.com/nodejs/node/issues/5257
PR-URL: https://github.com/nodejs/node/pull/6023
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
IPv6 addresses in Host header (URI), must be enclosed within
square brackets, in order to properly separate the host address
from any port reference.
PR-URL: https://github.com/nodejs/node/pull/5314
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
The test intentionally assigns a global. Use `global` namespace to make
it clear that it is intentional and not an accidental leak.
PR-URL: https://github.com/nodejs/node/pull/6026
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
There was a comment in `test-domain-crypto.js` indicating that the
pollution of the `global` object with a `domain` property was
intentional. Provide more information in the comment so someone may
easily determine why. Use `global.domain` rather than declaring `domain`
without the `var` keyword to more clearly signal that the pollution is
intentional.
PR-URL: https://github.com/nodejs/node/pull/6017
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Use `global` to be explicit that a global variable is intended.
PR-URL: https://github.com/nodejs/node/pull/6014
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Do not convert typed arrays to `Buffer` for deepEqual since
their values may not be accurately represented by 8-bit ints.
Instead perform binary comparison of underlying `ArrayBuffer`s,
but only when the array types match.
Never apply any kind of optimization for floating-point typed
arrays since bit pattern equality is not the right kind of check
for them.
PR-URL: https://github.com/nodejs/node/pull/5910
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Fixes: https://github.com/nodejs/node/issues/5907
Use empty string instead of `www.google.com` for tests where we are just
doing parameter evaluation. This will avoid DNS lookups which appear to
be causing flakiness on Raspberry Pi devices in CI.
PR-URL: https://github.com/nodejs/node/pull/5996
Fixes: https://github.com/nodejs/node/issues/5554
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Check that piping a large chunk of data from `process.stdin`
into `process.stdout` does not lose any data by verifying that
the output has the same size as the input.
This is a regression test for #5927 and fails for the commits
in the range [ace100945..89abe8680).
PR-URL: https://github.com/nodejs/node/pull/5949
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
`test-stdtout-close-unref.js` will fail if `process.stdin._handle` does
not exist. On UNIX-like operating systems, you can see this failure this
way:
./node test/parallel/test-stdout-close-unref.js < /dev/null
This issue has been experienced by @bengl and @drewfish in a Docker
container. I'm not sure why they are experiencing it in their
environment, but since it is possible that the `_handle` property does
not exist, let's use `child_process.spawn()` to make sure it exists.
PR-URL: https://github.com/nodejs/node/pull/5916
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Natanael Copa
David Halls
Anna Henningsen
Rich Trott
Santiago Gimeno
Myles Borins
Jeremiah Senkpiel
Carl Lei
Fedor Indutny
Ali Ijaz Sheikh
Evan Lucas
Brian White
surya panikkal
silverwind
Ilya Shaisultanov
Mihai Potra
Matteo Collina
Anna Henningsen