The changes introdcued here replace the deprecated
v8 method SetNamedPropertyHandler() to SetHandler()
in node.cc.
Prior to refactoring, the method defined callbacks
when accessing object properties defined by Strings
and not Symbols.
test/parallel/test-v8-interceptStrings-not-Symbols.js
demonstrates that this behaviour remained unchanged
after refactoring.
PR-URL: https://github.com/nodejs/node/pull/9062
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
There are multiple reports of Windows7 not being able to resolve
localhost on some setups (web search also confirms that). This change
will advertise "127.0.0.1" as inspector host name.
Fixes: https://github.com/nodejs/node/issues/9382
Fixes: https://github.com/nodejs/node/issues/9188
PR-URL: https://github.com/nodejs/node/pull/9451
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
test-stream2-readable-empty-buffer-no-eof fails on resource-constrained
machines due to its use of timers. Removing timers makes it more
reliable and doesn’t affect the validity of the test, as it only uses
relative timing relations.
Failures were noticed on freebsd10-64 in CI. I am able to replicate the
failure with `tools/test.py --repeat=100 -j 100`. When run alone, it
passes reliably.
Refs: https://github.com/nodejs/node/pull/9359
PR-URL: hkttps://github.com/nodejs/node/pull/9360
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Avoid the `exit` command to be sent more than once. It prevents from
undesired errors emitted on `proc.stdin`.
Remove the watchdog timer so the test does not fail in case it takes
longer to complete.
PR-URL: https://github.com/nodejs/node/pull/9490
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James Snell <jasnell@gmail.com>
Remove the timer just in case the test takes longer to complete.
PR-URL: https://github.com/nodejs/node/pull/9460
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Timer-dependent tests fail frequently on certain platforms in CI when
run in parallel with other tests, likely due to competition for
resources. Move test-repl-timeout-throw to sequential to avoid this
problem. Also did some minor refactoring (var->const and more use of
assert.strictEqual of looser assertions).
PR-URL: https://github.com/nodejs/node/pull/9431
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Johan Bergstrom <bugs@bergstroem.nu>
PR-URL: https://github.com/nodejs/node/pull/7376
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The timer is not necessary. The test will timeout via the test harness
if the test fails. This should resolve spurious CI failures.
PR-URL: https://github.com/nodejs/node/pull/9361
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
* var -> const
* remove function names where V8 inference is as good or better
* add function names where there is no V8 inference
* assert.equal -> strictEqual
* move assertion from exit handler to response end handler
PR-URL: https://github.com/nodejs/node/pull/9344
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Use assert.strictEqual() instead of assert.equal(),
=== instead of ==, and const instead of var.
PR-URL: https://github.com/nodejs/node/pull/9308
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Remove unneeded timers from some tests and move others from parallel
testing to sequential testing.
This is to resolve test failures on freebsd10-64 on CI. The failures
are all due to timers firing later than expected. Timers firing later
than they are set for can happen on resource-constrained hosts and is
not a bug.
In general, it may be wise to put tests that depend on timing into
sequential testing rather than parallel testing, as the timing can
be affected by other simultaneously-running test processes.
Fixes: https://github.com/nodejs/node/issues/8041
Fixes: https://github.com/nodejs/node/issues/9227
PR-URL: https://github.com/nodejs/node/pull/9317
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Julien Gilli <jgilli@nodejs.org>
Reviewed-By: Johan Bergstrom <bugs@bergstroem.nu>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
The test was sometimes timing out due to a race condition. In OS X,
events for `fs.watch()` might only start showing up after a delay. This
is a limitation of the operating system. To work around that, there was
a timer in the test that delayed the writing of the file by 100ms.
However, sometimes that was not enough, and so the event never fired,
and the test timed out.
Change the timer to an interval so that it fires repeatedly until it is
picked up. This change only affects OS X.
Fixes: https://github.com/nodejs/node/issues/8511
PR-URL: https://github.com/nodejs/node/pull/9303
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
* use 'strictEqual' instead of 'equal'
* use '!==' instead of '!='
PR-URL: https://github.com/nodejs/node/pull/9297
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
The test has two test cases, but only the first was being run due to a
small bug. This change fixes the bug.
PR-URL: https://github.com/nodejs/node/pull/9305
Reviewed-By: Julien Gilli <jgilli@nodejs.org>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Instead of writing to the REPL’s input stream for the alignment
spaces in `.editor` mode, let `readline` handle the spaces
properly (echoing them using `_ttyWrite` and adding them to the
current line buffer).
Fixes: https://github.com/nodejs/node/issues/9189
PR-URL: https://github.com/nodejs/node/pull/9207
Reviewed-By: Prince John Wesley <princejohnwesley@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
In `.editor` mode, `repl.write()` would have crashed when the
`key` argument was not present, because the overwritten
`_ttyWrite` of REPLs doesn’t check for the absence of a second
argument like `readline.write()` does.
Since the docs indicate that the argument is optional, add
a check paralleling the one in `readline.write()`.
PR-URL: https://github.com/nodejs/node/pull/9207
Reviewed-By: Prince John Wesley <princejohnwesley@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Replaces function expressions with ES6 arrow functions as well as
improve the comparison operator to check if operands are of same types.
PR-URL: https://github.com/nodejs/node/pull/9239
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Replace calls to assert.equal() and assert.notEqual() with
assert.strictEqual() and assert.strictNotEqual() respectively.
PR-URL: https://github.com/nodejs/node/pull/9263
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Removed the errorTimer from test-http-set-timeout.js, as this timer is
not necessary to test the setTimeout functionality.
Also edited the console.log message on line 8 to log the correct
timeout duration. Changed var to const, and added common.mustCall() to
on timeout and on error callbacks.
Fixes: https://github.com/nodejs/node/issues/9256
PR-URL: https://github.com/nodejs/node/pull/9264
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Writing data to TLSWrap instance during handshake will result in it
being queued in `write_item_queue_`. This queue won't get cleared up
until the end of the handshake.
Technically, it gets cleared on `~TLSWrap` invocation, however this
won't ever happen because every `WriteWrap` holds a reference to the
`TLSWrap` through JS object, meaning that they are doomed to be alive
for eternity.
To breach this dreadful contract a knight shall embark from the
`close` function to kill the dragon of memory leak with his magic
spear of `destroySSL`.
`destroySSL` cleans up `write_item_queue_` and frees `SSL` structure,
both are good for memory usage.
PR-URL: https://github.com/nodejs/node/pull/9586
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
- Changed `assert.ok()` to `assert.strictEqual()`.
- Changed `var` to `const` where possible.
PR-URL: https://github.com/nodejs/node/pull/9231
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
This commit adds coverage for the timeout option used by
child_process exec() and execFile().
PR-URL: https://github.com/nodejs/node/pull/9208
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This fixes one of the tests that has been failing on CI on freebsd for
a bit by removing an unnecessary timer.
PR-URL: https://github.com/nodejs/node/pull/9199
Fixes: https://github.com/nodejs/node/issues/7929
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
59714cb7b3 introduced the
`util.inspect.custom` symbol, but it was exported as
`customInspectSymbol` by `internal/util.js` and referenced as
`inspectSymbol` by `buffer.js`.
PR-URL: https://github.com/nodejs/node/pull/9289
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This is a partial revert of
14d1a8a631, which coerced the offset
of Buffer#slice() using the | operator. This causes some edge
cases to be handled incorrectly. This commit restores the old
behavior, but converts offsets to integers using Math.trunc().
This commit does not revert any tests, and adds an additional
regression test.
Refs: https://github.com/nodejs/node/issues/9096
Refs: https://github.com/nodejs/node/pull/9101
PR-URL: https://github.com/nodejs/node/pull/9341
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
As shown in https://github.com/nodejs/node/issues/9096, the offset and
end value of the `slice` call are coerced to numbers and then passed to
`FastBuffer`, which internally truncates the mantissa part if the number
is actually a floating point number. This actually affects the new
length of the slice calculation. For example,
> const original = Buffer.from('abcd');
undefined
> original.slice(original.length / 3).toString()
'bc'
This happens because, starting value of the slice is 4 / 3, which is
1.33 (approximately). Now, the length of the slice is calculated as
the difference between the actual length of the buffer and the starting
offset. So, it becomes 2.67 (4 - 1.33). Now, a new `FastBuffer` is
constructed, with the following values as parameters,
1. actual buffer object,
2. starting value, which is 1.33 and
3. the length 2.67.
The underlying C++ code truncates the numbers and they become 1 and 2.
That is why the result is just `bc`.
This patch makes sure that all the offsets are coerced to integers
before any calculations are done.
Fixes: https://github.com/nodejs/node/issues/9096
PR-URL: https://github.com/nodejs/node/pull/9101
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
This commit adds coverage for errors returned by execFileSync()
when the child process exits with a non-zero code.
PR-URL: https://github.com/nodejs/node/pull/9211
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Commit 93a44d5 ("src: fix deferred events not working with -e") defers
evaluation of the script to the next tick.
A side effect of that change is that 'beforeExit' listeners run before
the actual script. 'beforeExit' is emitted when the event loop is
empty but process.nextTick() does not ref the event loop.
Fix that by using setImmediate(). Because it is implemented in terms
of a uv_check_t handle, it interacts with the event loop properly.
Fixes: https://github.com/nodejs/node/issues/8534
PR-URL: https://github.com/nodejs/node/pull/8821
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Remove parallel/test-v8-inspector-json-protocol, it duplicates the test
found in inspector/test-inspector.
PR-URL: https://github.com/nodejs/node/pull/9184
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Fix a nullptr dereference when an invalid path is requested.
Regression introduced in commit 69fc85d ("inspector: generate UUID for
debug targets"), caught by Coverity.
PR-URL: https://github.com/nodejs/node/pull/9184
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Add a test for _writableState.needDrain.
PR-URL: https://github.com/nodejs/node/pull/8799
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Related: https://github.com/nodejs/node/issues/8686
By convention, inspector protocol targets do not advertise connection
URLs when the frontend is already connected as multiple inspector
protocol connections are not supported.
PR-URL: https://github.com/nodejs/node/pull/8919
Reviewed-By: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
test-child-process-pass-fd.js parent can exit with an error on failure
to fork, in which case it will leak child processes. Limit child
lifetime to that of parent.
Fixes: https://github.com/nodejs/node/issues/9255
PR-URL: https://github.com/nodejs/node/pull/9257
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Environment variables should be treated case-insensitive on Windows
platforms and case-sensitive on UNIX platforms.
This commit ensures this behavior persists.
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/9166
Fixes: https://github.com/nodejs/node/issues/9157
Increase the number of iterations from 1e4 to 1e5. Makes the test pass
for me locally when previously it would fail 9 out of 10 times because
the running time was not enough to smooth away the outliers.
Fixes: https://github.com/nodejs/node/issues/8744
PR-URL: https://github.com/nodejs/node/pull/9241
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: not-an-aardvark <not-an-aardvark@users.noreply.github.com>
Move sequential/test-crypto-timing-safe-equal-benchmarks to test/pummel
because it fails for me locally quite frequently and because it takes
about five or six seconds to complete, which is too long for a test in
test/sequential.
Fixes: https://github.com/nodejs/node/issues/8744
PR-URL: https://github.com/nodejs/node/pull/9241
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: not-an-aardvark <not-an-aardvark@users.noreply.github.com>
This test was failing on FreeBSD from time to time in the project CI.
The bug the test was written for would guarantee that the timer would
fire at least 100ms late, but the assertion was firing if it was more
than 50ms late.
This changes the assertion to fire when the timer is more than 100ms
late.
I ran a modified version of this test using 0.10.38 (which has the bug)
and 0.10.39 (which has the fix) to confirm that it still fails in the
buggy one and passes in the fixed one.
PR-URL: https://github.com/nodejs/node/pull/9198
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Julien Gilli <jgilli@nodejs.org>
`test-dgram-send-callback-buffer-length` was timing out (via the
200ms timeout in the code) on FreeBSD in CI. The 200ms timeout is
arbitrary and not necessary. Remove it.
PR-URL: https://github.com/nodejs/node/pull/9197
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
`common` is required twice in test-setproctitle.js. Remove one of the
instances.
Other refactoring:
* var -> const and let
* assert.equal -> assert.strictEqual
* assert.notEqual -> assert.notStrickEqual
* string concatenation -> template string
* use of assert.ifError() instead of asserting error is null
PR-URL: https://github.com/nodejs/node/pull/9169
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
In most cases, named functions match the variable or property to which
they are being assigned. That also seems to be the practice in a series
of PRs currently being evaluated that name currently-anonymous
functions.
This change applies that rule to instances in the code base that don't
comply with that practice.
This will be enforceable with a lint rule once we upgrade to ESLint
3.8.0.
PR-URL: https://github.com/nodejs/node/pull/9113
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
The doc/api/addons.md document contains examples of Addon
Initialization functions that take a parameter named exports.
This also matches the name used in node.cc when calling:
mp->nm_register_func(exports, module, mp->nm_priv);
Currently, a number of the tests name this same parameter target. This
commit renames target to exports for consistency.
PR-URL: https://github.com/nodejs/node/pull/9135
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/9119
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
The no-useless-escape rule in ESLint did not previously flag certain
unnecessary escaping in template strings. These will be flagged in
ESLint 3.8.0.
PR-URL: https://github.com/nodejs/node/pull/9112
Reviewed-By: Teddy Katz <teddy.katz@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
PR-URL: https://github.com/nodejs/node/pull/9124
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Fix a regression introduced in commit 2996b5c ("crypto: Allow GCM
ciphers to have a longer IV length") from April 2016 where a misplaced
parenthesis in a 'is ECB cipher?' check made it possible to use empty
IVs with non-ECB ciphers.
Also fix some exit bugs in test/parallel/test-crypto-authenticated.js
that were introduced in commit 4a40832 ("test: cleanup IIFE tests")
where removing the IFFEs made the test exit prematurely instead of just
skipping subtests.
PR-URL: https://github.com/nodejs/node/pull/9032
Refs: https://github.com/nodejs/node/pull/6376
Refs: https://github.com/nodejs/node/issues/9024
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Reviewed-By: Shigeki Ohtsu <ohtsu@ohtsu.org>
AnnaMag
Eugene Ostroukhov
Anna Henningsen
Santiago Gimeno
Gibson Fahnestock
Rich Trott
Kyle E. Mitchell
Isobel Redelmeier
Gerges Beshay
Deverick
Ben Noordhuis
BethGriggs
Fedor Indutny
Jeena Lee
cjihrig
Evan Lucas
Charmander
Sakthipriyan Vairamani (thefourtheye)
Italo A. Casas
Sam Roberts
Oliver Salzburg
Daniel Bevenius
larissayvette