Tests on SmartOS are sometimes retried due to a SmartOS issue on CI.
When this happens, a TAP diagnostic message is written.
PR-URL: https://github.com/nodejs/node/pull/3960
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Implement a crude TAP13 writer for cpplint. Does its job and
not much else. Only supports writing TAP output to file,
not vs7 or emacs formats.
PR-URL: https://github.com/nodejs/node/pull/3448
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Add linting rule requiring `throw new Error()` over `throw Error()`.
PR-URL: https://github.com/nodejs/node/pull/3714
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This PR is the first step enabling support for native modules
for AIX. The main issue is that unlike linux where all
symbols within the Node executable are available to the shared
library for a native module (npm), on AIX the symbols must
be explicitly exported. In addition, when the shared library is
built it must be linked using a list of the available symbols.
This patch covers the changes need to:
1) Export the symbols when building the node executable
2) Generate the file listing the symbols that can be used when
building the shared library.
For AIX, it breaks the build process into 2 steps. The first builds
a static library and then generates a node.exp file which contains
the symbols from that library. The second builds the node executable
and uses the node.exp file to specify which symbols should be
exported. In addition, it save the node.exp file so that it can
later be used in the creation of the shared library when building
a native module.
The following additional steps will be required in dependent projects
to fully enable AIX for native modules and are being worked
separately:
- Updates to node-gyp to use node.exp when creating the
shared library for a native module
- Fixes to gyp related to copying files as covered in
https://codereview.chromium.org/1368133002/patch/1/10001
- Pulling in updated gyp versions to Node and node-gyp
- Pulling latest libuv
These changes were done to minimize the change to other platforms
by working within the existing structure to add the 2 step process
for AIX without changing the process for other platforms.
PR-URL: https://github.com/nodejs/node/pull/3114
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Updated test-npm to use absolute paths for tmp/cache/prefix
PR-URL: https://github.com/nodejs/node/pull/3309
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Be slightly more verbose in cases where tests time out.
PR-URL: https://github.com/nodejs/node/pull/2647
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
test/common.js contains code that detects global variable leaks.
This eslint rule checks that a module named `common` is loaded. It is
only applicable to files in the test directory. Tests that intentionally
leak variables can opt out with an eslint-disable comment.
PR-URL: https://github.com/nodejs/node/pull/3157
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Apply our eslint rules to the code for our custom eslint rules.
Eslint Inception! Maybe. I never saw that movie...
PR-URL: https://github.com/nodejs/node/pull/3195
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Roman Reiss <me@silverwind.io>
* Exclude `derb.cpp` as well as `derb.c` from Node builds
(file was renamed in ICU 56)
ICU 56 renamed derb.c to derb.cpp because of C++ yay.
This broke the exclusion of "derb.c" when building tools.
Solution is to add derb.c AND derb.cpp to exclusion.
We don't build the 'derb' tool, so it's fine to list the
excluded source twice.
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
PR-URL: https://github.com/nodejs/node/pull/3066
Fixes: https://github.com/nodejs/node/issues/3065
For ICU 55 we are currently stripping out bidi and
the callers. AIX is more pedantic and identified
an additional caller than needed to be stripped out.
This PR adds that caller to those stripped out.
PR-URL: https://github.com/nodejs/node/pull/3115
Reviewed-By: Steven Loomis <srloomis@us.ibm.com>
Currently there are three separate tick processor scripts for
mac, windows, and linux. These have been replaced with a single
node.js script to improve maintainability and remove the need
to preserve parallel logic in these separate places.
PR-URL: https://github.com/nodejs/node/pull/2868
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Fix a build error that occurs when icutrim is run to cut down
the ICU locale set on Big-Endian platforms when building with
--with-intl=small-icu (which is done by the "make binary" target).
This fixes the binary build on POWER platforms.
Fixes: https://github.com/nodejs/node/issues/2601
PR-URL: https://github.com/nodejs/node/pull/2602
Reviewed-By: Steven Loomis <srloomis@us.ibm.com>
These are the core changes that allow AIX to compile. There
are still some test failures as there are some patches needed for
libuv and npm that we'll need to contribute through those
communities but this set allows node to be built on AIX and
pass most of the core tests
The change in js2c is because AIX does not support $ in
identifier names. See the discussion/agreement in
https://github.com/nodejs/node/issues/2272
PR-URL: https://github.com/nodejs/node/pull/2364
Reviewed-By: Ben Noordhuis <ben@strongloop.com>
Reviewed-By: Rod Vagg <r@va.gg>
By default the logfile is opened in append mode. This commit makes sure
that the file is opened in write-binary mode, so that the file will be
created if it doesn't exist or overwrite if it exists.
Fixes: #2834
PR-URL: #2837
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Alexis Campailla <orangemocha@nodejs.org>
The polyfill is only needed if incorrect command line arguments
are passed to the script so it was missed in initial testing.
PR-URL: https://github.com/nodejs/node/pull/2694
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
As it is, the TAP result shows an extra hyphen in front of test names.
Sample:
ci.nodejs.org/job/node-test-commit-osx/nodes=osx1010/454/tapResults/
This patch removes the extra hyphen.
PR-URL: https://github.com/nodejs/node/pull/2718
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
cpplint uses the top-level .git directory to determine what the root is
for #include guards. If it doesn't find a .git directory, it walks up
all the way to the system root and subsequently complains that guards
must be written as HOME_USER_SRC_NODE_SRC_FILENAME_H_.
This commit replaces the .git-based path munging with a fixed root path
relative to the location of the cpplint script, making it possible to
successfully run `make test` from an extracted tarball.
Fixes: https://github.com/nodejs/node/issues/2693
PR-URL: https://github.com/nodejs/node/pull/2710
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
now need to specify "nodejs" or "iojs", also remove .gpg file
PR-URL: https://github.com/nodejs/node/pull/2623
Reviewed-By: jbergstroem - Johan Bergström <bugs@bergstroem.nu>
This is a port of 14db629497.
Original commit message:
Since install is per machine only, installation path should be stored
in local machine instead of current user. The registry stores HKLM in
different places for 32 and 64 bit applications, so the installer
will not suggest the old path when upgrading from 32 to 64 bit
version.
Fixesjoyent/node#5592Fixesjoyent/node#25087
PR-URL: https://github.com/joyent/node/pull/25640
Reviewed-By: Alexis Campailla <alexis@janeasystems.com>
Reviewed-By: Bert Belder <bertbelder@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/2565
Reviewed-By: Alexis Campailla <alexis@janeasystems.com>
This is an adaptation of 8e80528453.
Original commit message:
The MSI install scope was set to the WiX default, which is per-user.
However, with UAC, it could not be installed by a standard user
because InstallPrivileges is elevated by default, hence the install
scope should be set to per-machine. Furthermore, the default install
path is a per-machine location and setting the system path requires
administrator privileges.
By changing the InstallScope to perMachine, Start Menu shortcuts are
placed in ProgramData and not the installing user's AppData folder,
making the shortcuts available to other users. This also fixes the
installation when AppData is a network folder.
The custom action is necessary to allow upgrades. Since a per-machine
MSI cannot upgrade an application installed per-user, the custom
action checks if there is going to be an upgrade to a previous
version installed per-user and sets the installation as per-user to
allow upgrading. Hence, the advantages of installing per-machine will
only apply in fresh installations.
Fixesjoyent/node#5849Fixesjoyent/node#7629
PR-URL: https://github.com/joyent/node/pull/25640
Reviewed-By: Alexis Campailla <alexis@janeasystems.com>
Reviewed-By: Bert Belder <bertbelder@gmail.com>
The original commit was adapted to search all upgrade codes listed in
the upgrade table, as the current installer tries to upgrade from two
different upgrade codes.
PR-URL: https://github.com/nodejs/node/pull/2565
Reviewed-By: Alexis Campailla <alexis@janeasystems.com>
Make the test runner return a 0 exit code when only
flaky tests fail and --flaky-tests=dontcare is specified.
Ported from a9b642cf5b
PR-URL: https://github.com/nodejs/node/pull/2424
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: João Reis <reis@janeasystems.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Adding --flaky-tests option, to allow regarding flaky tests failures
as non-fatal.
Currently only observed by the TapProgressIndicator, which will
add a # TODO directive to tests classified as flaky. According to the
TAP specification, the test harness is supposed to treat failures
that have a # TODO directive as non-fatal.
Ported from df3a2b2cf2
PR-URL: https://github.com/nodejs/node/pull/2424
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: João Reis <reis@janeasystems.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
This enables the MSI to upgrade old Node.js versions and
early versions of io.js before the upgrade code was changed.
This also reverts 24def66293.
PR-URL: https://github.com/nodejs/node/pull/2439
Reviewed-By: Rod Vagg <rod@vagg.org>
Make the tool that generates add-ons from doc/api/addons.markdown print
the names of the files it writes out. Before this commit, it printed a
rather unhelpful "Done."
PR-URL: https://github.com/nodejs/node/pull/2428
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Rod Vagg <rod@vagg.org>
This is a port of joyent/node@e192f61514cd1500de895cb10128d412f842d7d0 .
Original commit message:
Older WiX versions included a header with extern "C" declaration,
hence the custom action source must be C++.
Reviewed-By: João Reis <reis@janeasystems.com>
PR-URL: https://github.com/joyent/node/pull/25569
PR-URL: https://github.com/nodejs/node/pull/2365
Reviewed-By: Alexis Campailla <alexis@janeasystems.com>
This is a port of joyent/node@16bcd68dc5f449c331499ced22aa626dbb2cdefc .
Original commit message:
The original change that added support for running custom actions
during the install process
(joyent/node@e7c84f82c730bddb7450dc56065aab11b93ffd30) assumed that
Visual Studio 2013 is used to generate the installer file.
However, that is not always the case, and older versions of Visual
Studio should allow users to generate Windows installer files. This
change makes the custom actions visual studio project use the visual
studio version that is found by vcbuild.bat.
Reviewed-By: João Reis <reis@janeasystems.com>
PR-URL: https://github.com/joyent/node/pull/25569
PR-URL: https://github.com/nodejs/node/pull/2365
Reviewed-By: Alexis Campailla <alexis@janeasystems.com>
This commit replaces instances of io.js with Node.js, based on the
recent convergence. There are some remaining instances of io.js,
related to build and the installer.
Fixes: https://github.com/nodejs/node/issues/2361
PR-URL: https://github.com/nodejs/node/pull/2367
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: João Reis <reis@janeasystems.com>
Currently, v8 native deps must be built in order to run the log
processor on node profiling output. These scripts use node instead
of d8 to remove this dependency.
This change was originally proposed to the v8 team but since the
changes are not v8 specific, we have moved the proposal here. See:
https://codereview.chromium.org/1179173009/
PR-URL: https://github.com/nodejs/node/pull/2090
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
With this option, tests can be divided in groups and only one is run
from each group. This enables us to parallelize the tests across
multiple machines.
PR-URL: https://github.com/nodejs/io.js/pull/2260
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Alexis Campailla <alexis@janeasystems.com>
These are the core changes that allow pLinux BE/LE compile. They
don't include all of the changes needed for AIX which will follow
once we have pLinux up and running in the builds
PR-URL: https://github.com/nodejs/io.js/pull/2124
Reviewed-By: Ben Noordhuis <ben@strongloop.com>
Reviewed-By: Johan Bergstrom <bugs@bergstroem.nu>
Rich Trott
Ben Noordhuis
Steven R. Loomis
Johan Bergström
Rebecca Turner
Shigeki Ohtsu
Imran Iqbal
Michael Dawson
Jeremiah Senkpiel
Karl Skomski
Nathan Rajlich
Matt Loring
Stewart Addison
Sakthipriyan Vairamani
Brian White
Rod Vagg
João Reis
Alexis Campailla
Julien Gilli
cjihrig
Frederic Hemberger
James M Snell
Steven R. Loomis