See https://code.google.com/p/chromium/issues/detail?id=25916
Parse URLs with backslashes the same as web browsers, by replacing all
backslashes with forward slashes, except those that occur after the
first # character.
Manual rebase of 9520ade
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
On windows you can see ECONNABORTED instead of ECONNRESET in various
scenarios, and they are both applicable we're testing that Node is not
swallowing these errors which it was known to do prior to 0.10
As a comment in the test states: "This test should not be ported to
v0.10 and higher, because the problem is fixed by not ignoring
ECONNRESET in the first place."
The test is checking whether write returns false instead of whether an
ECONNRESET has been raised.
Replace with test-http-destroyed-socket-write2, this test verifies that
ECONNRESET is raised when writing to an http request where the server
has destroyed the socket.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
On Windows we cannot get the server address until a connection
is accepted.
From MSDN:
The getsockname function does not always return information about
the host address when the socket has been bound to an unspecified
address, unless the socket has been connected with connect or accept
(for example, using ADDR_ANY). A Windows Sockets application must not
assume that the address will be specified unless the socket is
connected.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
* Check SHA before using files from cache
* adduser: allow change of the saved password
* Make `npm install` respect `config.unicode`
* Fix lifecycle to pass `Infinity` for config env value
* Don't return 0 exit code on invalid command
* cache: Handle 404s and other HTTP errors as errors
* bump tap dep, make tests stderr a bit quieter
* Resolve ~ in path configs to env.HOME
* Include npm version in default user-agent conf
* npm init: Use ISC as default license, use save-prefix for deps
* Many test and doc fixes
Because of differences in memcmp() implementation, normalize output to
return -1, 0 or 1 only.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
This commit introduces `readableObjectMode` and
`writableObjectMode` options for Duplex streams.
This can be used mostly to make parsers and
serializers with Transform streams.
Also the docs section about stream state objects
is removed, because it is not relevant anymore.
The example from the section is remade to show
new options.
fixes#6284
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
When ExitCallback was not called with an error such as ENOENT in
uv_spawn, the process handle still remains refed and needs to be closed.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
1) ThrowCryptoTypeErrors was not actually used for
type-related errors. Removed it.
2) For AEAD modes, OpenSSL does not set any internal
error information if Final does not complete suc-
cessfully. Therefore, "TypeError:error:00000000:l
ib(0):func(0):reason(0)" would be the error mess-
age. Use a default message for these cases.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
compare() works like String.localeCompare such that:
Buffer.compare(a, b) === a.compare(b);
equals() does a native check to see if two buffers are equal.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Commit f9ced08 switches V8 on Linux over from gettimeofday() to
clock_getres() and clock_gettime(). As of glibc 2.17, those functions
live in libc. For older versions, we need to pull them in from librt.
Fixes the following link-time error;
Release/obj.target/deps/v8/tools/gyp/libv8_base.a(platform-posix.o):
In function `v8::internal::OS::Ticks()':
platform-posix.cc:(.text+0x93c):
undefined reference to `clock_gettime'
platform-posix.cc:(.text+0x989):
undefined reference to `clock_getres'
Fixes#7514.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Date.now() indirectly calls gettimeofday() on Linux and that's a system
call that is extremely expensive on virtualized systems when the host
operating system has to emulate access to the hardware clock.
Case in point: output from `perf record -c 10000 -e cycles:u -g -i`
for a benchmark/http_simple bytes/8 benchmark with a light load of
50 concurrent clients:
53.69% node node [.] v8::internal::OS::TimeCurrentMillis()
|
--- v8::internal::OS::TimeCurrentMillis()
|
|--99.77%-- v8::internal::Runtime_DateCurrentTime(v8::internal::Arguments, v8::internal::Isolate*)
| 0x23587880618e
That's right - over half of user time spent inside the V8 function that
calls gettimeofday().
Notably, nearly all system time gets attributed to acpi_pm_read(), the
kernel function that reads the ACPI power management timer:
32.49% node [kernel.kallsyms] [k] acpi_pm_read
|
--- acpi_pm_read
|
|--98.40%-- __getnstimeofday
| getnstimeofday
| |
| |--71.61%-- do_gettimeofday
| | sys_gettimeofday
| | system_call_fastpath
| | 0x7fffbbaf6dbc
| | |
| | |--98.72%-- v8::internal::OS::TimeCurrentMillis()
The cost of the gettimeofday() system call is normally measured in
nanoseconds but we were seeing 100 us averages and spikes >= 1000 us.
The numbers were so bad, my initial hunch was that the node process was
continuously getting rescheduled inside the system call...
v8::internal::OS::TimeCurrentMillis()'s most frequent caller is
v8::internal::Runtime_DateCurrentTime(), the V8 run-time function
that's behind Date.now(). The timeout handling logic in lib/http.js
and lib/net.js calls into lib/timers.js and that module will happily
call Date.now() hundreds or even thousands of times per second.
If you saw exports._unrefActive() show up in --prof output a lot,
now you know why.
That's why this commit makes V8 switch over to clock_gettime() on Linux.
In particular, it checks if CLOCK_REALTIME_COARSE is available and has
a resolution <= 1 ms because in that case the clock_gettime() call can
be fully serviced from the vDSO.
It speeds up the aforementioned benchmark by about 100% on the affected
systems and should go a long way toward addressing the latency issues
that StrongLoop customers have been reporting.
This patch will be upstreamed as a CR against V8 3.26. I'm sending it
as a pull request for v0.10 first because that's what our users are
running and because the delta between 3.26 and 3.14 is too big to
reasonably back-port the patch. I'll open a pull request for the
master branch once the CR lands upstream.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Forcibly flushes the request headers. You need this with long-lived
HTTP connections where the first data isn't written until the connection
has been established (think: tunneling requests over HTTP CONNECT.)
Fixes#7296.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
In tls.connect a unix socket connection to a path may be made in
recent versions of node by specifying the value for the path
property.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
OpenSSL behaves oddly: on client `cert_chain` contains
the `peer_certificate`, but on server it doesn't.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
When creating a TLSSocket instance based on the existing connecting
socket, `_connecting` property is copied after the initialization of
`net.Socket`. However, since `net.Socket` constructor will call
`.read(0)` if the `readable` is true - error may happen at this code
chunk in net.js:
Socket.prototype._read = function(n) {
debug('_read');
if (this._connecting || !this._handle) {
debug('_read wait for connection');
this.once('connect', this._read.bind(this, n));
...
Leading to a test failures on windows:
- test/simple/test-tls-connect-given-socket.js
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Yazhong Liu
Trevor Norris
Nikolai Vavilov
isaacs
Feross Aboukhadijeh
Timothy J Fontaine
Vladimir Kurchatkin
Alexis Campailla
Adrian Lang
Fedor Indutny
Shigeki Ohtsu
Ingmar Runge
Forrest L Norvell
Rasmus Christian Pedersen
Sean McArthur
Ben Noordhuis
Rod Vagg
Denys Zariaiev
Ben Noordhuis
Julian Gruber
Farrin Reid