Reasons:
- `test-async-wrap-getasyncid` binds a handle, so move to
sequential because port cannot be already in use.
- `test-dgram-implicit-bind-failure` requires a hardcoded
port number to properly send socket packet.
- `test-http-agent-uninitialized-with-handle` requires a
hardcoded port number to properly send http request.
- `test-http-agent-uninitialized` requires a hardcoded port
number to properly send http request.
- `test-net-localport` requires a hardcoded port number
for assertions.
In addition this replaces two common.PORTs with a dynamic port.
PR-URL: https://github.com/nodejs/node/pull/15151
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Fix references within http2 core to HTTP_STATUS_CONTENT_RESET to point
to the correct HTTP_STATUS_RESET_CONTENT. Add tests for status 204,
205 & 304 in respond, respondWithFD & respondWithFile. Add general
error tests for respondWithFD & respondWithFile.
PR-URL: https://github.com/nodejs/node/pull/15153
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Claudio Rodriguez <cjrodr@yahoo.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
The only valid values for enablePush are 0 and 1. If validation
is requested, we should verify that it wasn't set to another
value rather than casting to Boolean regardless of value.
PR-URL: https://github.com/nodejs/node/pull/15167
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Store headersSent directly on response state after finish event
is triggered, so that users can always access it.
PR-URL: https://github.com/nodejs/node/pull/15232
Fixes: https://github.com/nodejs/node/issues/15226
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Fixes: https://github.com/nodejs/abi-stable-node/issues/51
PR-URL: https://github.com/nodejs/node/pull/15216
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com
Reviewed-By: James M Snell <jasnell.gmail.com>
Reviewed-By: Michael Dawson <mhdawson@ca.ibm.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Currently the nm_modname does not match the file name of the resulting
module. In fact, the nm_modname is pretty arbitrary. This seeks to
introduce some consistency into the nm_modname property by having the
name of the module appear in exactly one place: the "target_name"
property of the gyp target that builds the module.
PR-URL: https://github.com/nodejs/node/pull/15209
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Properties should be documented at same level as their constructor, as
they are in the other API doc sections.
PR-URL: https://github.com/nodejs/node/pull/15247
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
* add constants for dlopen flags, which are needed
for dlopen's flag passing.
* introduce an optional parameter for process.dlopen(),
allowing to pass dlopen flags (using values from os.constants.dlopen).
If no flags are passed, the default behavior is to load the library
with RTLD_LAZY (perform lazy binding) and RTLD_LOCAL (symbols are
available only locally).
PR-URL: https://github.com/nodejs/node/pull/12794
Refs: https://github.com/nodejs/node/pull/4105
Refs: https://github.com/libuv/libuv/pull/1331
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Added a .nyrc configuration file that can be used to configure
test coverage.
Added an exclude rule that removes write-coverage.js from coverage
reports.
Pulled reporter configuration into .nycrc and added an additional
text reporter.
PR-URL: https://github.com/nodejs/node/pull/15194
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Use these flags when running make coverage so that a package-lock.json
file is not generated and npm does not attempt to save the deps to a
non-existent package.json file.
PR-URL: https://github.com/nodejs/node/pull/15196
Refs: https://github.com/nodejs/node/pull/15190/files#r136932786
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
`tls.parseCertString()` was made public by mistack. So mark it as
deprecated.
PR-URL: https://github.com/nodejs/node/pull/14245
Refs: https://github.com/nodejs/node/issues/14193
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This commit documents and edge-case behavior in readable streams.
It is expected that non-object streams are measured in bytes
against the highWaterMark. However, it was discovered in issue
thereafter begin to measure the buffer's length in characters.
PR-URL: https://github.com/nodejs/node/pull/13442
Refs: https://github.com/nodejs/node/issues/6798
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
There are discrepancies between the errors defined in
`lib/internal/errors.js` and those documented in `doc/api/errors.md`.
Some of the errors recently defined are not documented, while others
were removed, but still have entries in the docs. This commit fills in
those gaps in the documentation.
PR-URL: https://github.com/nodejs/node/pull/15160
Fixes: https://github.com/nodejs/node/issues/15038
Reviewed-By: James M Snell <jasnell@gmail.com>
Add support for multiple PFX files in tls.createSecureContext.
Also added support for object-style PFX pass.
PR-URL: https://github.com/nodejs/node/pull/14793
Fixes: https://github.com/nodejs/node/issues/14756
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Set writableStream decodeStrings to false to let the
native layer handle converting strings to buffer.
PR-URL: https://github.com/nodejs/node/pull/15140
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Claudio Rodriguez <cjrodr@yahoo.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Add tests for Http2ServerRequest and Http2ServerResponse setTimeout
PR-URL: https://github.com/nodejs/node/pull/15156
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Add minimal test forbuffer benchmarks.
PR-URL: https://github.com/nodejs/node/pull/15175
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com
Add default values to use for `type` and `method` in `buffer` benchmarks
when the provided configuration value is an empty string. This is
primarily useful for testing, so the test can request a single iteration
without having to worry about providing different valid values for the
different benchmarks.
While making this change, some `var` instances in immediately
surrounding code were changed to `const`. In some cases, `var` had been
preserved so that the benchmarks would continue to run in versions of
Node.js prior to 4.0.0. However, now that `const` has been introduced
into the benchmark `common` module, the benchmarks will no longer run
with those versions of Node.js anyway.
PR-URL: https://github.com/nodejs/node/pull/15175
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com
Original commit message:
[turbofan] Improve representation selection for type guard.
This takes into account the type of the type guard when choosing
representation for a node. To make the representation changes
unambiguous, we pass the restricted type to the changer.
BUG=chromium:726554
Review-Url: https://codereview.chromium.org/2920193004
Cr-Commit-Position: refs/heads/master@{#45734}
PR-URL: https://github.com/nodejs/node/pull/15177
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This follows the EPS an allows the node CLI to have ESM as an entry point.
`node ./example.mjs`. A newer V8 is needed for `import()` so that is not
included. `import.meta` is still in specification stage so that also is not
included.
PR-URL: https://github.com/nodejs/node/pull/14369
Author: Bradley Farias <bradley.meck@gmail.com>
Author: Guy Bedford <guybedford@gmail.com>
Author: Jan Krems <jan.krems@groupon.com>
Author: Timothy Gu <timothygu99@gmail.com>
Author: Michaël Zasso <targos@protonmail.com>
Author: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Change default timeout to be tracked on the session instead
of the socket, as nghttp2 manages the socket and we would
need to maintain two sets of timeouts for similar purpose.
Also fixes session setTimeout to work as it wasn't getting
_unrefActive correctly (was called on the handle).
Fixes: https://github.com/nodejs/node/issues/15158
PR-URL: https://github.com/nodejs/node/pull/15188
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Adds Http2ServerRequest trailers & rawTrailers functionality. Also fixes
behaviour of multi-headers to conform with the spec (all values but
set-cookie and cookie should be comma delimited, cookie should be
semi-colon delimited and only set-cookie should be an array). Adds
setter for statusMessage that warns, for backwards compatibility.
End readable side of the stream on trailers or bodyless requests
Refs: https://github.com/expressjs/express/pull/3390#discussion_r136718729
PR-URL: https://github.com/nodejs/node/pull/15193
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
This exception can logically never happen because of the key stretching
that takes place first. Failure must therefore be a bug in Node.js and
not in the executing script.
PR-URL: https://github.com/nodejs/node/pull/15183
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
[kFinish](code) can be triggered from a 'finish' event (for example
when calling response.end) which does not pass code. That tries to
set closedCode to undefined resulting in NaN closedCode instead of
NGHTTP2_NO_ERROR. Check for code !== undefined before setting.
Adds tests for closed and closedCode.
PR-URL: https://github.com/nodejs/node/pull/15154
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
* Use tmp directory instead of mutating the fixtures directory.
* Add comment explaining that the unlinkSync() at the end of the test is
part of the test. Otherwise it may be tempting to remove it as
unnecessary tmp directory cleanup.
PR-URL: https://github.com/nodejs/node/pull/15173
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Add instructions for generating code coverage reports to BUILDING.md
PR-URL: https://github.com/nodejs/node/pull/15190
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Currently when building using --debug-http2 there are a number of
compilation errors like the following:
In file included from ../src/node_http2.cc:3:
In file included from ../src/node_http2.h:6:
../src/node_http2_core-inl.h:43:32: error: too few arguments to function
call, single argument 'type'
was not specified
handle->TypeName(), len, message);
This commit adds the type argument to the calls.
PR-URL: https://github.com/nodejs/node/pull/15197
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Currently the options available for HTTP2 are not displayed when running
configure --help.
This commit enables the following HTTP2 section to be included in the
help output:
HTTP2:
Flags that allows you to control HTTP2 features in Node.js
--debug-http2 build with http2 debug statements on (default is
false)
--debug-nghttp2 build nghttp2 with DEBUGBUILD (default is false)
PR-URL: https://github.com/nodejs/node/pull/15198
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
5723c4c5f0 was an unintentional breaking change in that it changed
the behaviour of `tls.createSecureContext()` to throw on false-y input
rather than ignoring it. This breaks real-world applications like `npm`.
This restores the previous behaviour.
PR-URL: https://github.com/nodejs/node/pull/15131
Ref: https://github.com/nodejs/node/pull/15053
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Alexey Orlenko <eaglexrlnk@gmail.com>
Reviewed-By: MichaëZasso <targos@protonmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Change _async_ to _asynchronous_ in `deprecations.md` to avoid confusion
with the `async` keyword. This has the additional minor benefit of being
more formal and less conversational prose.
PR-URL: https://github.com/nodejs/node/pull/15172
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
small test verifying that the NghttpError is as expected
PR-URL: https://github.com/nodejs/node/pull/15105
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/15105
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/15105
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Comparing NaN will not throw anymore.
PR-URL: https://github.com/nodejs/node/pull/15036
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/14888
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Jon Moss
Anatoli Papirovski
Refael Ackermann
Ben Noordhuis
Gabriel Schulhof
Tim Costa
Sam Roberts
Ezequiel Garcia
Vse Mozhet Byt
Timothy Gu
cjihrig
Benjamin Coe
Simon Brewster
XadillaX
Jessica Quynh Tran
George Bezerra
Yury Popov
Rich Trott
Miguel Martins
Eugene Ostroukhov
Bradley Farias
Adina Shanholtz
Daniel Bevenius
Anna Henningsen
Myles Borins
James M Snell
Ruben Bridgewater