Forced conversion of the encoding parameter to a string within
crypto.js, fixing segmentation faults in node_crypto.cc.
Fixes: https://github.com/nodejs/node/issues/9819
PR-URL: https://github.com/nodejs/node/pull/12164
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
A dynamically allocated array was being used, simplify the memory
management by using std::vector.
PR-URL: https://github.com/nodejs/node/pull/12241
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
parallel/test-crypto-dh.js assumes particular curve algorithms
(e.g. Oakley-EC2N-3) are supported, though this may not necessarily be
the case if Node.js was built with a system version of OpenSSL.
PR-URL: https://github.com/nodejs/node/pull/12265
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This change was suggested by bnoordhuis in the following comment:
https://github.com/nodejs/node/pull/9163#discussion_r84264628
Not including any tests as this is covered by test/addons/at-exit.
PR-URL: https://github.com/nodejs/node/pull/12255
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
I'm currently seeing a timeout error for test-signal-handler.js on
macosx when using the following configuration:
./configure --debug --without-ssl && make -j8 test
--without-ssl implies that there will be no inspector but the signal
SIGUSR1 is blocked in PlatformInit just the same. But in this case
never unblocked which is causing the signal to never be delivered to
the handlers in test-signal-handler.js and it loops until it times out.
Not sure if this is the best way of fixing this but hopefully more eyes
on this will help.
PR-URL: https://github.com/nodejs/node/pull/12266
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
* Since https://github.com/nodejs/node/pull/6559 known_issues
does run on CI.
* Add some notes to explain the expectations around tests in
known_issues.
PR-URL: https://github.com/nodejs/node/pull/12262
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Alexey Orlenko <eaglexrlnk@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
The addons-napi testsuite is already included in $(CI_NATIVE_SUITES), so
we don't need to manually specify it in the test-ci target as well.
PR-URL: https://github.com/nodejs/node/pull/12201
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
A std::string manages its own memory, so using one removes the implicit
assumption that the argv vector passed to node will never be
deallocated. Also, the enabled_categories are used to construct a
std::stringstream, so its simpler to use the standard library
consistently.
PR-URL: https://github.com/nodejs/node/pull/12242
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Use no-restricted-syntax to implement the requirement that `Error`
objects must be thrown with the `new` keyword.
PR-URL: https://github.com/nodejs/node/pull/12249
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Teddy Katz <teddy.katz@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/12247
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Alexey Orlenko <eaglexrlnk@gmail.com>
This commit adds C++ tests for `base64_encode()` and `base64_decode()`
functions defined in `base64.h`. The functionality is already being
tested indirectly in JavaScript tests for Buffer, but it won't hurt to
test the low-level functions too, especially given that they aren't only
used in the internal Buffer implementation, Chrome inspector protocol
support relies upon them too.
PR-URL: https://github.com/nodejs/node/pull/12238
Refs: https://github.com/nodejs/node/pull/12146#issuecomment-291559685
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
This improves the performance of napi_instanceof() by retrieving
Symbol.hasInstance from the global object once and then storing a
persistent reference to it in the env.
PR-URL: https://github.com/nodejs/node/pull/12246
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
6481c93a modified `lib/assert.js` and added some tests for new
functionality, but left a single line uncovered by tests. This adds a
test that covers the currently-uncovered line (which is the final
`return` statement in `setHasSimilarElement()`).`
PR-URL: https://github.com/nodejs/node/pull/12239
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Update OS level supprot for AIX. Based on discussions
with the AIX team we've have decided that the minimum
support level should be 7.1. This is because support
for AIX 6.1 will likely end during the lifespan of
the upcoming Node version 8 release.
PR-URL: https://github.com/nodejs/node/pull/12235
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Add Alexey Orlenko (@aqrln) to the list of collaborators in README.md
PR-URL: https://github.com/nodejs/node/pull/12273
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Rich Trott <rtrott@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/12233
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The napi_property_attributes enum used names and values from
v8::PropertyAttribute, but those negative flag names were outdated
along with the default behavior of a property being writable,
enumerable, and configurable unless otherwise specified. To match the
ES5 standard property descriptor those attributes should be positive
flags and should default to false unless otherwise specified.
PR-URL: https://github.com/nodejs/node/pull/12240
Fixes: https://github.com/nodejs/abi-stable-node/issues/221
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
- a regular expression that matches the entire error message.
PR-URL: https://github.com/nodejs/node/pull/12139
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Prince John Wesley <princejohnwesley@gmail.com>
In the 2017-04-05 meeting, the CTC agreed to remove support for the
legacy debugger in 8.0.0. This is the first step in this direction.
Refs: https://github.com/nodejs/CTC/issues/94
PR-URL: https://github.com/nodejs/node/pull/12197
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Intention was to get to `PRODUCT_DIR` so no need to do path voodoo
Also added `'msvs_quote_cmd': 0` and more precise quoting
PR-URL: https://github.com/nodejs/node/pull/11217
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Steven R Loomis <srloomis@us.ibm.com>
This commit adds lldbinit files from upstream V8 and also adds these so
that they get installed when `make install` is run.
Original commit message:
[tools] add lldbinit
The goal of this commit is to add the equivalent to gdbinit but
for lldb. I've tried to replicate the commands as close as possible
but I'm unsure about the jss command and hoping to get some feedback
on it in addition to the bta command which I'm not sure how/when
this could be used. This is probably just inexperience on my part.
The lldbinit file can be placed into a directory prefixed with dot
(.lldbinit) and the python script is currently expected to be in the
same directory. The path to the script can be changed manually if
needed as well.
NOTRY=true
Review-Url: https://codereview.chromium.org/2758373002
Cr-Commit-Position: refs/heads/master@{#44136}
PR-URL: https://github.com/nodejs/node/pull/12061
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The current debugger is slated for removal soon. The debugger test that
has been disabled for over four years is unlikely to be repaired at this
point. Remove the test and its associated fixture.
PR-URL: https://github.com/nodejs/node/pull/12199
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Putting the link for the commit guideline at the bottom of the pull
request template makes it a bit confusing when opening a pull request as
the markdown does not render. Not everyone is familiar with the syntax
used there and it is easy to mess it up (for example, by not leaving a
blank line above it). It is more natural and useful if the URL is
included inline.
PR-URL: https://github.com/nodejs/node/pull/12216
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Vse Mozhet Byt <vsemozhetbyt@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Because the final array length is known, it's better to allocate its
final length at initialization time to avoid future reallocations.
Also add an explicit buffer length greater than 0 comparison so
it's more readable, avoids the internal ToBoolean call and follows the
standard Node.js API format (as it can be checked in other similar
structures where 'length > 0' is preferred over 'length')
PR-URL: https://github.com/nodejs/node/pull/11733
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
src/tracing/trace_event.h was updated by applying the following changes:
1) Include src/tracing/trace_event_common.h instead of the one from v8
base.
2) Replace all instances of base::Atomic with intptr_t (trace events can
only be generated from the main thread for now).
3) Replace instances of V8_INLINE with inline.
4) Eliminate uses of DCHECK.
5) Eliminate uses of V8_UNLIKELY, the branch predictor should be good
enough alone.
6) Change the namespace used by trace_event.h from v8::internal::tracing
to node::tracing.
7) Remove CallStatsScopedTracer class and related macros (they rely on
V8 implementation details).
8) Change ConvertableToTraceFormat to v8::ConvertableToTraceFormat.
9) Add function "static void SetCurrentPlatform(v8::Platform*
platform);" to the declaration of TraceEventHelper.
PR-URL: https://github.com/nodejs/node/pull/12127
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
1. We define struct napi_env__ to include the isolate, the last
exception, and the info about the last error.
2. We instantiate one struct napi_env__ during module registration and
we pass it into the FunctionCallbackInfo for all subsequent entries into
N-API when we create functions/accessors/finalizers.
Once module unloading will be supported we shall have to delete the
napi_env we create during module init.
There is a clear separation between public and private API wrt. env:
1. Public APIs assert that env is not nullptr as their first action.
2. Private APIs need not validate env. They assume it's not nullptr.
PR-URL: https://github.com/nodejs/node/pull/12195
Fixes: https://github.com/nodejs/abi-stable-node/issues/198
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Coverity was complaining that finalizer was being
leaked in this method, however it should be
freed when the buffer is finalized so I believe
the message is invalid.
Add the required comments to suppress the warning.
PR-URL: https://github.com/nodejs/node/pull/12192
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Hitesh Kanwathirtha <hiteshk@microsoft.com>
The v8 n-api implementation had been depending on a one-to-one
relationship between v8 and n-api v8 property attributes.
Remove this dependency and fix coverity scan issue
165845.
PR-URL: https://github.com/nodejs/node/pull/12191
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Currently it is possible to configure using --without-ssl and
--shared-openssl/--openssl-no-asm/openssl-fips without an error
occuring.
The commit add check for these combinations:
$ ./configure --without-ssl --shared-openssl
Error: --without-ssl is incompatible with --shared-openssl
$ ./configure --without-ssl --openssl-no-asm
Error: --without-ssl is incompatible with --openssl-no-asm
$ ./configure --without-ssl --openssl-fips=dummy
Error: --without-ssl is incompatible with --openssl-fips
PR-URL: https://github.com/nodejs/node/pull/12175
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
I noticed that few of the print statements in configure have a leading
space with is not consistent with the rest of the file. Not sure if
this intentional or not so creating this commit just to bring it up
just in case.
PR-URL: https://github.com/nodejs/node/pull/12176
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: mhdawson - Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
* Replace `var` by `const`.
* Comment out ellipses.
* Update code example (provide relevant file path, add missing option).
PR-URL: https://github.com/nodejs/node/pull/12171
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This test refactored the original test for mkdtempSync prefix validation
and added the test also for the async function mkdtemp.
PR-URL: https://github.com/nodejs/node/pull/12080
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
This test ensures that UTF-8 characters can be used in core JavaScript
modules built into Node's binary.
PR-URL: https://github.com/nodejs/node/pull/11423
Ref: https://github.com/nodejs/node/pull/11129
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Daijiro Wachi
Tobias Nießen
Sam Roberts
Karl Cheng
Vse Mozhet Byt
Daniel Bevenius
Jan Krems
Gibson Fahnestock
Joyee Cheung
Uppinder Chugh
Rich Trott
Timothy Gu
Gabriel Schulhof
Alexey Orlenko
Refael Ackermann
Michael Dawson
Steven
Jason Ginchereau
dave-k
Eugene Ostroukhov
alejandro
Matt Loring
Brian White
Vinay Hiremath
DavidCai
Luca Maraschi
Jason Marsh