PR-URL: https://github.com/nodejs/node/pull/12470
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
sequential/test-benchmark-child-process is still failing sometimes flaky
on Windows in CI. Mark it as flaky in sequential.status until it gets
sorted.
PR-URL: https://github.com/nodejs/node/pull/12561
Ref: https://github.com/nodejs/node/issues/12560
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
test-benchmark-child-process sometimes times out on Windows in CI.
Minimize the number of configurations that run so it will (hopefully)
not time out anymore. Set dur=0.
PR-URL: https://github.com/nodejs/node/pull/12518
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
In the 2017-04-05 meeting, the CTC agreed to remove support for the
legacy debugger in 8.0.0. This is the first step in this direction.
Refs: https://github.com/nodejs/CTC/issues/94
PR-URL: https://github.com/nodejs/node/pull/12197
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This test is allocating much more memory than necessary to actually
reproduce the original problem. Lowering the amount of memory allocated
increases performance at least in some cases and makes this test less
likely to time out on SmartOS.
PR-URL: https://github.com/nodejs/node/pull/11177
Ref: https://github.com/nodejs/node/issues/10166
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Julien Gilli <jgilli@nodejs.org>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Export a new common.noop no-operation function for general use.
Allow using common.mustCall() without a fn argument to simplify
test cases.
Replace various non-op functions throughout tests with common.noop
PR-URL: https://github.com/nodejs/node/pull/12027
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Teddy Katz <teddy.katz@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Currently, benchmark code is not exercised at all in CI. This adds a
minimal test for net benchmarks. If this is deemed acceptable, similar
minimal tests for other benchmarks can be written. Additionally, as
issues and edge cases are uncovered, checks for them can be added.
PR-URL: https://github.com/nodejs/node/pull/11979
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
test-domain-abort-on-uncaught is flaky under load. Move it to sequential
so it is not competing with other tests for resources.
PR-URL: https://github.com/nodejs/node/pull/11817
Fixes: https://github.com/nodejs/node/issues/11814
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Daijiro Wachi <daijiro.wachi@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Currently when node is build --without-ssl and the test are run,
there are a number of failing test due to tests expecting crypto
support to be available. This commit fixes fixes the failure and
instead skips the tests that expect crypto to be available.
PR-URL: https://github.com/nodejs/node/pull/11631
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The intention of test case is to make sure that `timeout` property is honored
and the code in context terminates and throws correct exception. However in
test case, the code inside context would complete before `timeout` for windows
and would sometimes fail. Updated the code so it guarantee to not complete
execution until timeout is triggered.
Fixes: https://github.com/nodejs/node/issues/11261
PR-URL: https://github.com/nodejs/node/pull/11530
Reviewed-By: James M Snell <jasnell.gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Josh Gavant <josh.gavant@outlook.com>
This commit adds a mustNotCall() helper for testing. This provides
an alternative to using common.fail() as a callback, or creating
a callback function for the sole purpose of calling common.fail().
PR-URL: https://github.com/nodejs/node/pull/11152
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Even after being moved to `sequential` in
1ce05ad540, `test-regress-GH-897` still
was occasionally flaky on Raspberry Pi devices on CI.
The test is especially sensitive to resource constraints. It failed
reliably on my laptop if I moved it to `parallel` and ran 32 competing
node test processes. Even for a flaky test, that's unusually low. I
typically don't see problems, even for flaky tests, until I get up to
around four times that number.
On a Raspberry Pi, of course, that sensitivity to resource constraints
will manifest much sooner.
This change checks the order of timers firing, rather than the duration
before a timer is fired. This eliminates the sensitivity to resource
constraints. The test can now be moved back to `parallel`. I am able to
run many copies of the test simultaneously without seeing test failures.
PR-URL: https://github.com/nodejs/node/pull/10903
Fixes: https://github.com/nodejs/node/issues/10073
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
test-fs-readfile-tostring-fail is resource-intensive and is flaky in
CI. Move to sequential tests so it is not competing for resources with
other tests.
PR-URL: https://github.com/nodejs/node/pull/10744
Fixes: https://github.com/nodejs/node/issues/10742
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Use assert.strictEqual instead of assert.equal in tests, manually
convert types where necessary.
PR-URL: https://github.com/nodejs/node/pull/10698
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Teddy Katz <teddy.katz@gmail.com>
Manually fix issues that eslint --fix couldn't do automatically.
PR-URL: https://github.com/nodejs/node/pull/10685
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Formatting changes for upcoming linter update.
PR-URL: https://github.com/nodejs/node/pull/10561
Reviewed-By: Teddy Katz <teddy.katz@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
* use const and let instead of var
* use assert.strictEqual instead of assert.equal
* use arrow functions
* removed unwanted console log
PR-URL: https://github.com/nodejs/node/pull/10531
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
add an --inspect-brk option which breaks on
first line of user script. same behavior as old
--debug-brk flag.
PR-URL: https://github.com/nodejs/node/pull/8979
Reviewed-By: Eugene Ostroukhov <eostroukhov@chromium.org>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@keybase.io>
test-http-client-timeout-with-data has failed here and there in CI on
FreeBSD and OS X. The test has a socket timeout set to 50ms and a timer
set for 100ms. However, they are not necessarily set in the same tick of
the event loop and their ordering is therefore not guaranteed.
Instead of using a timer, this change listens for an event on the
listener to know when the socket timeout has occurred and then runs the
code originally in the timer.
Additional refactoring: Replaced `process.on('exit', ...)` checks with
`common.mustCall()` and replaced usage of `assert.equal()` with
`assert.strictEqual()`.
PR-URL: https://github.com/nodejs/node/pull/10431
Reviewed-By: James M Snell <jasnell@gmail.com>
* use const and let instead of var
* use common.mustCall to control functions executions
* use assert.strictEqual instead of assert.equal
* use assert.ifError to handle errors
* use arrow functions
* remove console.log and process.stdout.write
PR-URL: https://github.com/nodejs/node/pull/10452
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
1. Lot of repeating code has been refactored to a function
2. Errors in async calls are properly asserted
3. Fail the test if the callbacks are not fired
PR-URL: https://github.com/nodejs/node/pull/10384
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Julian Duque <julianduquej@gmail.com>
* used let and const instead of var
* used assert.strictEqual instead assert.equal
PR-URL: https://github.com/nodejs/node/pull/10357
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Julian Duque <julianduquej@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
test-timers-same-timeout-wrong-list-deleted was flaky under load because
there is no guarantee that a timer will fire within a given period of
time. It had an exit handler that checked that the process was finishing
in less than twice as much as a timer was set for. Under load, the
timer could take over 200ms to fire even if it was set for 100ms, so
this was causing the test to be flaky on CI from time to time.
However, that timing check is unnecessary to identify the regression
that the test was written for. When run with a version of Node.js that
does not contain the fix that accompanied the test in its initial
commit, an assertion indicating that there were still timers in the
active timer list fired. So, this commit removes the exit handler timing
check and relies on the existing robust active timers list length check.
This allows us to move the test back to parallel because it does not
seem to fail under load anymore.
The test was refactored slightly, removing duplicated code to a
function, using `assert.strictEqual()` instead of `assert.equal()`,
changing a 10ms timer to 1ms, and improving the messages provided by
assertions.
Fixes: https://github.com/nodejs/node/issues/8459
PR-URL: https://github.com/nodejs/node/pull/10362
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
test-buffer-creation-regression is flaky on some SmartOS hosts in CI,
timing out. Move to sequential so it does not compete with other tests
for resources. Reduce three test cases to just the one needed to
identify the regression.
PR-URL: https://github.com/nodejs/node/pull/10161
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Italo A. Casas <me@italoacasas.com>
Requiring a file from a directory that contains an invalid package.json
file should throw an error.
PR-URL: https://github.com/nodejs/node/pull/10044
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
`test-regress-GH-897` is dependent on a timer firing within a period of
time. Especially on some of the FreeBSD hosts on CI, we have seen tests
like that fail when run in parallel. (This may have nothing to do with
FreeBSD and may just mean that the hosts are resource-constrained.) Move
this test to sequential as we have done with several other
timer-dependent tests recently.
The test has also been refactored and documented via comments.
PR-URL: https://github.com/nodejs/node/pull/9487
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Minwoo Jung <jmwsoft@gmail.com>
Timer-dependent tests fail frequently on certain platforms in CI when
run in parallel with other tests, likely due to competition for
resources. Move test-repl-timeout-throw to sequential to avoid this
problem. Also did some minor refactoring (var->const and more use of
assert.strictEqual of looser assertions).
PR-URL: https://github.com/nodejs/node/pull/9431
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Johan Bergstrom <bugs@bergstroem.nu>
checkExecSyncError() creates error objects for execSync() and
execFileSync(). If the child process created stderr output, then
it is attached to the end of the error message. However, stderr
can be an empty Buffer object, which always passes the truthy
check, leading to an extra newline in the error message. This
commit adds a length check, which will work with both strings and
Buffers.
PR-URL: https://github.com/nodejs/node/pull/9343
Reviewed-By: Wyatt Preul <wpreul@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Remove unneeded timers from some tests and move others from parallel
testing to sequential testing.
This is to resolve test failures on freebsd10-64 on CI. The failures
are all due to timers firing later than expected. Timers firing later
than they are set for can happen on resource-constrained hosts and is
not a bug.
In general, it may be wise to put tests that depend on timing into
sequential testing rather than parallel testing, as the timing can
be affected by other simultaneously-running test processes.
Fixes: https://github.com/nodejs/node/issues/8041
Fixes: https://github.com/nodejs/node/issues/9227
PR-URL: https://github.com/nodejs/node/pull/9317
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Julien Gilli <jgilli@nodejs.org>
Reviewed-By: Johan Bergstrom <bugs@bergstroem.nu>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
test-child-process-pass-fd.js parent can exit with an error on failure
to fork, in which case it will leak child processes. Limit child
lifetime to that of parent.
Fixes: https://github.com/nodejs/node/issues/9255
PR-URL: https://github.com/nodejs/node/pull/9257
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Replace calls to assert.equal() and assert.notEqual() with
assert.strictEqual() and assert.strictNotEqual() respectively.
PR-URL: https://github.com/nodejs/node/pull/9263
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
This commit adds coverage for errors returned by execFileSync()
when the child process exits with a non-zero code.
PR-URL: https://github.com/nodejs/node/pull/9211
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Verify that a package.json without a .main property loads index.js.
PR-URL: https://github.com/nodejs/node/pull/9196
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Move sequential/test-crypto-timing-safe-equal-benchmarks to test/pummel
because it fails for me locally quite frequently and because it takes
about five or six seconds to complete, which is too long for a test in
test/sequential.
Fixes: https://github.com/nodejs/node/issues/8744
PR-URL: https://github.com/nodejs/node/pull/9241
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: not-an-aardvark <not-an-aardvark@users.noreply.github.com>
The no-useless-escape rule in ESLint did not previously flag certain
unnecessary escaping in template strings. These will be flagged in
ESLint 3.8.0.
PR-URL: https://github.com/nodejs/node/pull/9112
Reviewed-By: Teddy Katz <teddy.katz@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Refactored test:
- 'var' to 'const'
- functon to arrow function
- using common.mustCall() and common.fail()
PR-URL: https://github.com/nodejs/node/pull/8586
Reviewed-By: Yosuke Furukawa <yosuke.furukawa@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
The `crypto.timingSafeEqual` test still seems to be a bit flaky. This
makes a few changes to the test:
* Separates the basic usage and the benchmarking into different tests
* Moves the timing-sensitive benchmark function into a separate module,
and reparses the module on every iteration of the loop to avoid shared
state between timing measurements.
PR-URL: https://github.com/nodejs/node/pull/8456
Reviewed-By: James M Snell <jasnell@gmail.com>
Reinstate crypto.timingSafeEqual() which was reverted due to test
issues. The flaky test issues are resolved in this new changeset.
PR-URL: https://github.com/nodejs/node/pull/8304
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
kumarrishav
Rich Trott
Joyee Cheung
Jan Krems
Sakthipriyan Vairamani (thefourtheye)
Brian White
Vse Mozhet Byt
James M Snell
Daniel Bevenius
Kunal Pathak
Tarang Hirani
cjihrig
Gibson Fahnestock
sivaprasanna
Josh Gavant
Adrian Estrada
Sam Shull
Michaël Zasso
Santiago Gimeno
Sam Roberts
Ben Noordhuis
Akito Ito
Teddy Katz
Dany Shaanan
not-an-aardvark