PR-URL: https://github.com/nodejs/node/pull/9294
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Prince John Wesley <princejohnwesley@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
PR-URL: https://github.com/nodejs/node/pull/9379
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Prince John Wesley <princejohnwesley@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
PR-URL: https://github.com/nodejs/node/pull/9338
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Use assert.strictEqual() instead of assert.equal(),
=== instead of ==, and const instead of var.
PR-URL: https://github.com/nodejs/node/pull/9308
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Bryan English <bryan@bryanenglish.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Remove unneeded timers from some tests and move others from parallel
testing to sequential testing.
This is to resolve test failures on freebsd10-64 on CI. The failures
are all due to timers firing later than expected. Timers firing later
than they are set for can happen on resource-constrained hosts and is
not a bug.
In general, it may be wise to put tests that depend on timing into
sequential testing rather than parallel testing, as the timing can
be affected by other simultaneously-running test processes.
Fixes: https://github.com/nodejs/node/issues/8041
Fixes: https://github.com/nodejs/node/issues/9227
PR-URL: https://github.com/nodejs/node/pull/9317
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Julien Gilli <jgilli@nodejs.org>
Reviewed-By: Johan Bergstrom <bugs@bergstroem.nu>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
The test was sometimes timing out due to a race condition. In OS X,
events for `fs.watch()` might only start showing up after a delay. This
is a limitation of the operating system. To work around that, there was
a timer in the test that delayed the writing of the file by 100ms.
However, sometimes that was not enough, and so the event never fired,
and the test timed out.
Change the timer to an interval so that it fires repeatedly until it is
picked up. This change only affects OS X.
Fixes: https://github.com/nodejs/node/issues/8511
PR-URL: https://github.com/nodejs/node/pull/9303
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
* use 'strictEqual' instead of 'equal'
* use '!==' instead of '!='
PR-URL: https://github.com/nodejs/node/pull/9297
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
On OpenBSD 6.0 and greater W^X is enabled by default. All executables
that violate W^X need to be marked with PT_OPENBSD_WXNEEDED. In
addition to this, they must be executed from a filesystem mounted with
'wxallowed'.
More info on W^X: https://en.wikipedia.org/wiki/W%5EX
PR-URL: https://github.com/nodejs/node/pull/9232
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The test has two test cases, but only the first was being run due to a
small bug. This change fixes the bug.
PR-URL: https://github.com/nodejs/node/pull/9305
Reviewed-By: Julien Gilli <jgilli@nodejs.org>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Instead of writing to the REPL’s input stream for the alignment
spaces in `.editor` mode, let `readline` handle the spaces
properly (echoing them using `_ttyWrite` and adding them to the
current line buffer).
Fixes: https://github.com/nodejs/node/issues/9189
PR-URL: https://github.com/nodejs/node/pull/9207
Reviewed-By: Prince John Wesley <princejohnwesley@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
In `.editor` mode, `repl.write()` would have crashed when the
`key` argument was not present, because the overwritten
`_ttyWrite` of REPLs doesn’t check for the absence of a second
argument like `readline.write()` does.
Since the docs indicate that the argument is optional, add
a check paralleling the one in `readline.write()`.
PR-URL: https://github.com/nodejs/node/pull/9207
Reviewed-By: Prince John Wesley <princejohnwesley@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit changes string manipulation in favor of template
literals in the `util` module.
PR-URL: https://github.com/nodejs/node/pull/9120
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Replaces function expressions with ES6 arrow functions as well as
improve the comparison operator to check if operands are of same types.
PR-URL: https://github.com/nodejs/node/pull/9239
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
The repeat option in test.py did not work as expected if `-j` was set to
more than one. Repeated tests running at the same time could share temp
directories and cause test failures. This was observed with:
tools/test.py -J --repeat=10 parallel/test-fs-watch-recursive
By using copy.deepCopy(), the repeated tests are separate objects and
not references to the same objects. Setting `thread_id` on one of them
will now not change the `thread_id` on all of them. And `thread_id` is
how the temp directory (and common.PORT as well) are determined.
Refs: https://github.com/nodejs/node/pull/9228
PR-URL: https://github.com/nodejs/node/pull/9249
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Replace calls to assert.equal() and assert.notEqual() with
assert.strictEqual() and assert.strictNotEqual() respectively.
PR-URL: https://github.com/nodejs/node/pull/9263
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Removed the errorTimer from test-http-set-timeout.js, as this timer is
not necessary to test the setTimeout functionality.
Also edited the console.log message on line 8 to log the correct
timeout duration. Changed var to const, and added common.mustCall() to
on timeout and on error callbacks.
Fixes: https://github.com/nodejs/node/issues/9256
PR-URL: https://github.com/nodejs/node/pull/9264
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Document that `execFileSync`, `execSync` and `spawnSync` also support
`stdio` as an Array.
PR-URL: https://github.com/nodejs/node/pull/9637
Fixes: https://github.com/nodejs/node/issues/9636
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Sam Roberts <sam@strongloop.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Writing data to TLSWrap instance during handshake will result in it
being queued in `write_item_queue_`. This queue won't get cleared up
until the end of the handshake.
Technically, it gets cleared on `~TLSWrap` invocation, however this
won't ever happen because every `WriteWrap` holds a reference to the
`TLSWrap` through JS object, meaning that they are doomed to be alive
for eternity.
To breach this dreadful contract a knight shall embark from the
`close` function to kill the dragon of memory leak with his magic
spear of `destroySSL`.
`destroySSL` cleans up `write_item_queue_` and frees `SSL` structure,
both are good for memory usage.
PR-URL: https://github.com/nodejs/node/pull/9586
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
- Changed `assert.ok()` to `assert.strictEqual()`.
- Changed `var` to `const` where possible.
PR-URL: https://github.com/nodejs/node/pull/9231
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
PR-URL: https://github.com/nodejs/node/pull/9243
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This commit adds coverage for the timeout option used by
child_process exec() and execFile().
PR-URL: https://github.com/nodejs/node/pull/9208
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
This fixes one of the tests that has been failing on CI on freebsd for
a bit by removing an unnecessary timer.
PR-URL: https://github.com/nodejs/node/pull/9199
Fixes: https://github.com/nodejs/node/issues/7929
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
59714cb7b3 introduced the
`util.inspect.custom` symbol, but it was exported as
`customInspectSymbol` by `internal/util.js` and referenced as
`inspectSymbol` by `buffer.js`.
PR-URL: https://github.com/nodejs/node/pull/9289
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Code coverage showed that the execSync() variable inheritStderr
was never set to the default value of true. This is because
the default case is hit whenever normalizeExecArgs() returns an
object without an 'options' property. However, this can never
be the case because normalizeExecArgs() unconditionally creates
the options object. This commit removes the unreachable code.
PR-URL: https://github.com/nodejs/node/pull/9209
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
This is a partial revert of
14d1a8a631, which coerced the offset
of Buffer#slice() using the | operator. This causes some edge
cases to be handled incorrectly. This commit restores the old
behavior, but converts offsets to integers using Math.trunc().
This commit does not revert any tests, and adds an additional
regression test.
Refs: https://github.com/nodejs/node/issues/9096
Refs: https://github.com/nodejs/node/pull/9101
PR-URL: https://github.com/nodejs/node/pull/9341
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
As shown in https://github.com/nodejs/node/issues/9096, the offset and
end value of the `slice` call are coerced to numbers and then passed to
`FastBuffer`, which internally truncates the mantissa part if the number
is actually a floating point number. This actually affects the new
length of the slice calculation. For example,
> const original = Buffer.from('abcd');
undefined
> original.slice(original.length / 3).toString()
'bc'
This happens because, starting value of the slice is 4 / 3, which is
1.33 (approximately). Now, the length of the slice is calculated as
the difference between the actual length of the buffer and the starting
offset. So, it becomes 2.67 (4 - 1.33). Now, a new `FastBuffer` is
constructed, with the following values as parameters,
1. actual buffer object,
2. starting value, which is 1.33 and
3. the length 2.67.
The underlying C++ code truncates the numbers and they become 1 and 2.
That is why the result is just `bc`.
This patch makes sure that all the offsets are coerced to integers
before any calculations are done.
Fixes: https://github.com/nodejs/node/issues/9096
PR-URL: https://github.com/nodejs/node/pull/9101
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
Using util.inspect doesn't change the output in this case
PR-URL: https://github.com/nodejs/node/pull/9560
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Roman Reiss <me@silverwind.io>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
This commit adds coverage for errors returned by execFileSync()
when the child process exits with a non-zero code.
PR-URL: https://github.com/nodejs/node/pull/9211
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Commit 93a44d5 ("src: fix deferred events not working with -e") defers
evaluation of the script to the next tick.
A side effect of that change is that 'beforeExit' listeners run before
the actual script. 'beforeExit' is emitted when the event loop is
empty but process.nextTick() does not ref the event loop.
Fix that by using setImmediate(). Because it is implemented in terms
of a uv_check_t handle, it interacts with the event loop properly.
Fixes: https://github.com/nodejs/node/issues/8534
PR-URL: https://github.com/nodejs/node/pull/8821
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Remove parallel/test-v8-inspector-json-protocol, it duplicates the test
found in inspector/test-inspector.
PR-URL: https://github.com/nodejs/node/pull/9184
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Fix a nullptr dereference when an invalid path is requested.
Regression introduced in commit 69fc85d ("inspector: generate UUID for
debug targets"), caught by Coverity.
PR-URL: https://github.com/nodejs/node/pull/9184
Reviewed-By: Ali Ijaz Sheikh <ofrobots@google.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Add more info about the contribution process after PR submission.
PR-URL: https://github.com/nodejs/node/pull/9259
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Add a test for _writableState.needDrain.
PR-URL: https://github.com/nodejs/node/pull/8799
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Related: https://github.com/nodejs/node/issues/8686
By convention, inspector protocol targets do not advertise connection
URLs when the frontend is already connected as multiple inspector
protocol connections are not supported.
PR-URL: https://github.com/nodejs/node/pull/8919
Reviewed-By: Aleksey Kozyatinskiy <kozyatinskiy@chromium.org>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
test-child-process-pass-fd.js parent can exit with an error on failure
to fork, in which case it will leak child processes. Limit child
lifetime to that of parent.
Fixes: https://github.com/nodejs/node/issues/9255
PR-URL: https://github.com/nodejs/node/pull/9257
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The tools/eslint/node_modules/.bin/eslint symlink was unused by node,
but was present, and pointed at a non-existent file. This causes
problems for tooling.
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/9299
Changes the custom inspect example to a more complex object that
actually uses the parameters of the custom inspect function. I
specifically chose a wrapper of a value called a "Box" that inspects
to "Box < inner_inspect_value >".
I also want there to be documentation explaining what the code is
actually doing. E.g., the padding replacement part is to make the
inspected value line up properly when multi-line inputs are given.
I also went with having a space between the Box's brackets and the inner
value because it matches how objects work, and that should definitely be
listed as a convention somewhere in here.
Also, the convention to shorten only when depth is less than 0, not e.g.
at 0.
But I don't know how to write the documentation for that, so I'm leaving
that to somebody who reads this message.
Ref: https://github.com/nodejs/node/issues/8442
PR-URL: https://github.com/nodejs/node/pull/8875
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
PR-URL: https://github.com/nodejs/node/pull/9026
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
On Windows OS, environment variables are case-insensitive and are
treated likewise in NodeJS. This can be confusing and can lead
to hard-to-debug problems when moving code from one environment
to another.
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/9166
Fixes: https://github.com/nodejs/node/issues/9157
Environment variables should be treated case-insensitive on Windows
platforms and case-sensitive on UNIX platforms.
This commit ensures this behavior persists.
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/9166
Fixes: https://github.com/nodejs/node/issues/9157
Increase the number of iterations from 1e4 to 1e5. Makes the test pass
for me locally when previously it would fail 9 out of 10 times because
the running time was not enough to smooth away the outliers.
Fixes: https://github.com/nodejs/node/issues/8744
PR-URL: https://github.com/nodejs/node/pull/9241
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: not-an-aardvark <not-an-aardvark@users.noreply.github.com>
Move sequential/test-crypto-timing-safe-equal-benchmarks to test/pummel
because it fails for me locally quite frequently and because it takes
about five or six seconds to complete, which is too long for a test in
test/sequential.
Fixes: https://github.com/nodejs/node/issues/8744
PR-URL: https://github.com/nodejs/node/pull/9241
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: not-an-aardvark <not-an-aardvark@users.noreply.github.com>
Fixes several formatting errors in the process doc, including missing
link references, misplaced underscores, and a missing backtick.
Fixes: https://github.com/nodejs/node/issues/9223
PR-URL: https://github.com/nodejs/node/pull/9235
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Brian White <mscdex@mscdex.net>
This allows us to use the exponentiation operator.
PR-URL: https://github.com/nodejs/node/pull/9218
Ref: https://github.com/nodejs/node/pull/9208#issuecomment-255309920
Reviewed-By: Teddy Katz <teddy.katz@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Jesse McCarthy
coderaiser
kobelb
Isobel Redelmeier
Rich Trott
Gerges Beshay
Aaron Bieber
Rod Vagg
Anna Henningsen
Alejandro Oviedo Garcia
Deverick
Ben Noordhuis
BethGriggs
Kenneth Skovhus
Fedor Indutny
Jeena Lee
Brian White
cjihrig
Evan Lucas
Charmander
Sakthipriyan Vairamani (thefourtheye)
Thomas Watson Steen
Gibson Fahnestock
Italo A. Casas
Italo A. Casas
Eugene Ostroukhov
Sam Roberts
Ryan Scheel (Havvy)
Olan Byrne
marzelin
Oliver Salzburg
Rod Machen
Michaël Zasso