raspiblitz/home.admin/70initLND.sh

#!/bin/sh
echo ""

# load network
network=`cat .network`

# verify that bitcoin is running
echo "*** Checking ${network} ***"
bitcoinRunning=$(sudo -u bitcoin ${network}-cli getblockchaininfo | grep -c blocks)
if [ ${bitcoinRunning} -eq 0 ]; then
  # HDD is not available yet
  echo "FAIL - ${network}d is not running"
  echo "recheck with orignal tutorial -->"
  echo "https://github.com/Stadicus/guides/blob/master/raspibolt/raspibolt_30_bitcoin.md"
fi
echo "OK - ${network}d is running"
echo ""

###### Wait for Blochain Sync
echo "*** Syncing Blockchain ***"
ready=0
while [ ${ready} -eq 0 ]
  do
    progress="$(sudo -u bitcoin ${network}-cli getblockchaininfo | jq -r '.verificationprogress')"
    verySmallProgress=$(echo $progress | grep -c 'e-');
    if [ ${verySmallProgress} -eq 1 ]; then
     progress="0.00";
    fi
    ready=$(echo $progress'>0.99' | bc -l)
    sync_percentage=$(printf "%.2f%%" "$(echo $progress | awk '{print 100 * $1}')")
    #echo "progress($progress) verySmallProgress($verySmallProgress) ready($ready) sync_percentage($sync_percentage)"
    if [ ${#ready} -eq 0 ]; then
      echo "waiting for init ... can take a while"
      ready=0
    elif [ "$sync_percentage" = "0.00%" ]; then  
      echo "waiting for network ... can take a while"
      ready=0
    elif [ ${ready} -eq 0 ]; then
      echo "${sync_percentage}"
    else
      echo "finishing sync ... can take a while"
    fi
    sleep 3
  done
echo "OK - Blockchain is synced"
echo ""

###### LND Config
echo "*** LND Config ***"
configExists=$( sudo ls /mnt/hdd/lnd/ | grep -c lnd.conf )
if [ ${configExists} -eq 0 ]; then
  sudo cp /home/admin/assets/lnd.${network}.conf /mnt/hdd/lnd/lnd.conf
  sudo chown bitcoin:bitcoin /mnt/hdd/lnd/lnd.conf
  if [ -d /home/bitcoin/.lnd ]; then
    echo "OK - LND config written"
  else
    echo "FAIL - Was not able to setup LND"
    exit 1
  fi
else
  echo "OK - exists"
fi
echo ""

###### Start LND
echo "*** Starting LND ***"
lndRunning=$(systemctl status lnd.service | grep -c running)
if [ ${lndRunning} -eq 0 ]; then
  sed -i "5s/.*/Wants=${network}d.service/" ./assets/lnd.service
  sed -i "6s/.*/After=${network}d.service/" ./assets/lnd.service
  sudo cp /home/admin/assets/lnd.service /etc/systemd/system/lnd.service
  sudo systemctl enable lnd
  sudo systemctl start lnd
  echo "Started LND .. waiting 30 seconds for init ..."
  sleep 30
fi

###### Check LND is running
lndRunning=$(systemctl status lnd.service | grep -c running)
if [ ${lndRunning} -eq 0 ]; then
  echo "!!!!!!!!!!!!!!!!!!!!!!!!!"
  echo "FAIL - LND is not running"
  echo "recheck with original tutorial -->"
  echo "https://github.com/Stadicus/guides/blob/master/raspibolt/raspibolt_40_lnd.md"
  exit 1
fi
echo "OK - LND is running"
echo ""

###### Instructions on Creating LND Wallet
setupStep=0
setupStep=$(sudo cat "/home/admin/.setup")
if [ ${setupStep} -lt 65 ]; then
  # setup state signals, that no wallet has been created yet
  dialog --backtitle "RaspiBlitz - LND Lightning Wallet" --msgbox "
${network} and Lighthing Services are installed.
You now need to setup your Lightning Wallet:

We will now call the command: lncli create
lncli = Lightning Network Command Line Interface
Learn more: https://api.lightning.community

Press OK and follow the 'Helping Instructions'.
" 14 52
  clear
  echo "****************************************************************************"
  echo "Helping Instructions --> for creating a new LND Wallet"
  echo "****************************************************************************"
  echo "A) For 'Wallet Password' use your PASSWORD C --> !! minimum 8 characters !!"
  echo "B) Answere 'n' because you dont have a 'cipher seed mnemonic' (24 words) yet" 
  echo "C) For 'passphrase' to encrypt your 'cipher seed' use PASSWORD D (optional)"
  echo "****************************************************************************"
  echo ""
  echo "lncli create"
  sudo -u bitcoin lncli create
  echo ""
  echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
  echo "!!! Make sure to write down the 24 words (cipher seed mnemonic) !!!"
  echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
  echo "If you are ready. Press ENTER."
  read key
  # set SetupState to 75 (mid thru this process)
  echo "65" > /home/admin/.setup
fi
echo "--> lets wait 30 seconds for LND to get ready"
sleep 30

###### Copy LND macaroons to admin
echo ""
echo "*** Copy LND Macaroons to user admin ***"
macaroonExists=$(sudo -u bitcoin ls -la /mnt/hdd/lnd/admin.macaroon | grep -c admin.macaroon)
if [ ${macaroonExists} -eq 0 ]; then
  echo ""
  echo "FAIL - LND Macaroons not created"
  echo "Please check the following LND issue:"
  echo "https://github.com/lightningnetwork/lnd/issues/890"
  exit 1
fi
sudo mkdir /home/admin/.lnd
macaroonExists=$(sudo ls -la /home/admin/.lnd/ | grep -c admin.macaroon)
if [ ${macaroonExists} -eq 0 ]; then
  sudo mkdir /home/admin/.lnd
  sudo cp /home/bitcoin/.lnd/tls.cert /home/admin/.lnd
  sudo cp /home/bitcoin/.lnd/admin.macaroon /home/admin/.lnd
  sudo chown -R admin:admin /home/admin/.lnd/
  echo "OK - LND Macaroons created"
else
  echo "OK - Macaroons are already copied"
fi

###### Unlock Wallet (if needed)
echo "*** Check Wallet Lock ***"
chain=$(${network}-cli -datadir=/home/bitcoin/.${network} getblockchaininfo | jq -r '.chain')
locked=$(sudo tail -n 1 /mnt/hdd/lnd/logs/${network}/${chain}net/lnd.log | grep -c unlock)
if [ ${locked} -gt 0 ]; then
  echo "OK - Wallet is locked ... starting unlocking dialog"
  ./unlockLND.sh
else
  echo "OK - Wallet is already unlocked"
fi

### Show Lighthning Sync
echo ""
echo "*** Check LND Sync ***"
item=0
chain="$(${network}-cli -datadir=/home/bitcoin/.${network} getblockchaininfo | jq -r '.chain')"
lndSyncing=$(sudo -u bitcoin lncli getinfo | jq -r '.synced_to_chain' | grep -c true)
if [ ${lndSyncing} -eq 0 ]; then
  echo "OK - wait for LND to be synced"
  while :
    do
      # show sync status
      ./80scanLND.sh
      sleep 3
      # break loop when synced
      lndSyncing=$(sudo -u bitcoin lncli getinfo | jq -r '.synced_to_chain' | grep -c true)
      if [ ${lndSyncing} -eq 1 ]; then
        break
      fi
    done
  clear
else
  echo "OK - LND is in sync"
fi

# set SetupState (scan is done - so its 80%)
echo "80" > /home/admin/.setup

###### finishSetup
./90finishSetup.sh