update dietpi/README.md

README.md

@@ -429,7 +429,7 @@ This guide was tested on:
 * Odroid HC1
 * Odroid HC2 (the same board except it accommodates a 3.5" 12V HDD)
 
-    see the instructions: [install_on_DietPi.md](install_on_DietPi.md)  
+    see the instructions: [dietpi/README.md](dietpi/README.md)  
     (after installing DietPi and buliding the SDcard the setup continues from [Documentation](#documentation))
 
 * hoping to extend this list with more compatible boards especially the ROCK64

dietpi/install_on_DietPi.md → dietpi/README.md

@@ -1,32 +1,47 @@
-# ⚡️ this setup is tested on an ODroid HC1 ⚡️
+# ⚡️ RaspiBlitz on DietPi ⚡️
-![](pictures/DroidBlitz.jpg)
+#  A hardware agnostic platform
+
+First tested on an Odroid HC1. It has no connection for an LCD, but the [hardware specs](hw_comparison.md) make up for it.
 
-there is no LCD, but the [hardware specs](hw_comparison.md) make up for it.
+![](pictures/DroidBlitz.jpg)
 
 
 ## Setting up the DietPi OS
 
-Download this image: 
+### Download the updated DietPi image
+
+For the Odroid HC1 / HC2 / XU3 / XU4 a v6.20.6 DietPi image with fail2ban installed is uploaded here:  
+https://mega.nz/#!AcdVBAbR!O-W3jP5LUgw7lMY8S9XcBWcKX3IhRNAAFmaYzDXIUC0  
+
+Burn the SDCard with [Etcher](https://www.balena.io/etcher/) and extend the rootfs partition to the size of your card with a partition manager.
+
+Insert the SDcard into the Odroid.
+
+Power up and continue with: [Run the DietPi optimized Raspiblitz SDcard build script](#Run-the-DietPi-optimized-Raspiblitz-SDcard-build-script)
+
+### Build your own DietPi image:
+
+For the Odroid HC1 / HC2 / XU3 / XU4 download this image:   
 https://dietpi.com/downloads/images/DietPi_OdroidXU4-ARMv7-Stretch.7z  
-and burn it to the SD with https://www.balena.io/etcher/
+and burn it to the SD with [Etcher](https://www.balena.io/etcher/)
 
 Getting started with DietPi: https://dietpi.com/phpbb/viewtopic.php?f=8&t=9#p9  
 
+In the desktop terminal on Linux / MacOS or Putty on Windows:  
 
-## On the desktop Linux terminal
 `ssh root@[IP-OF-DIETPI]`  
 password: `dietpi`  
 
->Ok > Cancel the recovery point  
 Ok > Cancel > Cancel  
-automatic apt update & apt upgrade on first logon and reboots  
+automatic apt update & apt upgrade and asks to reboot
-Opt out of survey > Ok > Ok
+![](pictures/dietpi_1st_reboot.png)  
 
 `ssh root@[IP-OF-DIETPI]`  
+after the previous update the ssh keys might change:
 
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@  
-@    WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!     @
+@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @  
-@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@  
 
 run (can be copied from the terminal output):   
 `ssh-keygen -f "/home/[your-linux-username]/.ssh/known_hosts" -R "dietpi.IP"`
@@ -36,26 +51,33 @@ yes >
 password: `dietpi`  
 
 At this point if the DietPi was not updated from 6.14 it does not manage to save settings going forward.  
-Exit with CTRL + C and run   
+Exit the sotware installer (press Tab to jump to Exit)
+![](pictures/dietpi-software_exit.png)  
+
+in the bash prompt run:  
 `dietpi-update`
-update continue after the reboot.
+>Ok > Cancel the recovery point   
+update > >Opt out of survey > Ok  
+Reboots
+
+`ssh root@[IP-OF-DIETPI]`  
+password: `dietpi` 
 
 >Ok > Cancel > Cancel  
 Search `fail2ban` > Space to select > Enter   
-Search `openssh` > Space to select OpenSSH Client > Enter  
 > Install > Ok  
-
-![](pictures/DietPi-Software.png)
-
 >Opt out of survey > Ok  
 Reboots again
 
+## Run the DietPi optimized Raspiblitz SDcard build script
+
+In the desktop terminal in Linux / MacOS or Putty in Windows:
+
 `ssh root@[IP-OF-DIETPI]`  
+password: `dietpi` 
 Should end up here on version v6.20.6 or higher: 
-
 ![](pictures/bash_prompt.png)
 
-
 run the SDcard build script in this format:
 `wget https://raw.githubusercontent.com/[GITHUB-USERNAME]/raspiblitz/[BRANCH]/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh [BRANCH] [GITHUB-USERNAME]`
 
@@ -69,12 +91,15 @@ See my example output: [sdcard_build_output](DietPi/sdcard_build_output)
 `ssh admin@[IP-OF-DROIDBLITZ]`  
 password: raspiblitz
 
-The setup continues as described in the RaspiBlitz setup [README.md](/README.md#documentation)
+### The setup continues as described in the RaspiBlitz setup [README.md](/README.md#documentation)
 
-## Example of setting up a RaspiBlitz HDD to be copied to the ODroid:
 
-![c#opy the blockchain from a HDD of a Raspiblitz](pictures/copy_hdd.png)
+
+### Examples of copying the blockchain data from a HDD using a powered USB to SATA adapter
+
+![copy the blockchain from a HDD of a Raspiblitz](pictures/5_options_to_copy.png)
 ![example setup](pictures/HDD_copy_example.jpg)
+![](pictures/adapterHDD_HC1.jpg)
 
 ### Useful commands for debugging:
 To test a new configuration run XXcleanHDD.sh and strictly restart
@@ -89,6 +114,9 @@ To test a new configuration run XXcleanHDD.sh and strictly restart
 `sudo journalctl -f -u lnd`  
 `./home/admin/XXdebugLogs.sh` - debug log collection on the raspiblitz 
 
+Currently the DietPi update process has a bug causing bootloop if left alone. Will be sorted once the current, >6.2 version is uploaded as the starting image.
+Here find some excerpts from the deafult dietpi.txt (https://github.com/Fourdee/DietPi/blob/master/dietpi.txt) to be used once the automatic install is feasible:
+
 ### Automate installation with the dietpi.txt
 Need to copy to SDcard /boot/dietpi.txt after burning the image with Etcher.
 IMPORTANT:

dietpi/build_sdcard_output

@@ -1,5 +1,5 @@
  ────────────────────────────────────────────────
- DietPi | Wed 30/01/19 - 12:55
+ DietPi | Mon 04/02/19 - 10:02
  ────────────────────────────────────────────────
  v6.20.6 | Odroid XU3/XU4/HC1/HC2 (armv7l)
  ────────────────────────────────────────────────
@@ -18,24 +18,17 @@
  htop             = Resource monitor.
  cpu              = Shows CPU information and stats.
 
-root@DietPi:~# (if it would start the DietPi-Software GUI again >  
+root@DietPi:~# wget https://raw.githubusercontent.com/openoms/raspiblitz/raspiblitz-dev/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh raspiblitz-dev openoms
--bash: syntax error near unexpected token `newline'
+--2019-02-04 10:02:34--  https://raw.githubusercontent.com/openoms/raspiblitz/raspiblitz-dev/build.sdcard/raspbianStretchDesktop.sh
-root@DietPi:~# Exit with CTRL + C  
--bash: Exit: command not found
-root@DietPi:~# `run dietpi-update`
--bash: run: command not found
-root@DietPi:~# and reinstall fail2ban and openssh after the reboot)^C
-root@DietPi:~# wget https://raw.githubusercontent.com/openoms/HardwareNode/raspiblitz-dev/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh raspiblitz-dev openoms
---2019-01-30 12:56:46--  https://raw.githubusercontent.com/openoms/HardwareNode/raspiblitz-dev/build.sdcard/raspbianStretchDesktop.sh
 Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.60.133
 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.60.133|:443... connected.
 HTTP request sent, awaiting response... 200 OK
-Length: 21177 (21K) [text/plain]
+Length: 21481 (21K) [text/plain]
 Saving to: ‘raspbianStretchDesktop.sh’
 
-raspbianStretchDesktop.sh 100%[===================================>]  20.68K  --.-KB/s    in 0.02s   
+raspbianStretchDesktop.sh 100%[====================================>]  20.98K  --.-KB/s    in 0.03s   
 
-2019-01-30 12:56:46 (978 KB/s) - ‘raspbianStretchDesktop.sh’ saved [21177/21177]
+2019-02-04 10:02:34 (649 KB/s) - ‘raspbianStretchDesktop.sh’ saved [21481/21481]
 
 
 *****************************************
@@ -65,10 +58,11 @@ Hit:1 http://fuzon.co.uk/meveric all InRelease
 Hit:2 http://fuzon.co.uk/meveric stretch InRelease
 Hit:3 https://oph.mdrjr.net/meveric all InRelease          
 Ign:4 https://cdn-aws.deb.debian.org/debian stretch InRelease
-Hit:5 https://cdn-aws.deb.debian.org/debian stretch-updates InRelease
+Get:5 https://cdn-aws.deb.debian.org/debian stretch-updates InRelease [91.0 kB]
 Hit:6 https://cdn-aws.deb.debian.org/debian-security stretch/updates InRelease
-Hit:7 https://cdn-aws.deb.debian.org/debian stretch-backports InRelease
+Get:7 https://cdn-aws.deb.debian.org/debian stretch-backports InRelease [91.8 kB]
 Hit:8 https://cdn-aws.deb.debian.org/debian stretch Release    
+Fetched 183 kB in 3s (58.9 kB/s)
 Reading package lists... Done
 Reading package lists... Done
 Building dependency tree       
@@ -96,15 +90,15 @@ The following packages will be REMOVED:
   fail2ban
 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
 After this operation, 1,321 kB disk space will be freed.
-(Reading database ... 15569 files and directories currently installed.)
+(Reading database ... 15499 files and directories currently installed.)
 Removing fail2ban (0.9.6-2) ...
 Reading package lists... Done
 Building dependency tree       
 Reading state information... Done
 The following additional packages will be installed:
-  binutils cpp cpp-6 dpkg-dev g++ g++-6 gcc gcc-6 libasan3 libatomic1 libc-dev-bin libc6-dev
+  binutils cpp cpp-6 dpkg-dev g++ g++-6 gcc gcc-6 libasan3 libatomic1 libc-dev-bin libc6-dev libcc1-0
-  libcc1-0 libdpkg-perl libgcc-6-dev libgdbm3 libgomp1 libisl15 libmpc3 libmpfr4 libperl5.24
+  libdpkg-perl libgcc-6-dev libgdbm3 libgomp1 libisl15 libmpc3 libmpfr4 libperl5.24 libstdc++-6-dev
-  libstdc++-6-dev libubsan0 linux-libc-dev make patch perl perl-modules-5.24 xz-utils
+  libubsan0 linux-libc-dev make patch perl perl-modules-5.24 xz-utils
 Suggested packages:
   binutils-doc cpp-doc gcc-6-locales debian-keyring gcc-6-doc libstdc++6-6-dbg gcc-multilib
   manpages-dev autoconf automake libtool flex bison gdb gcc-doc libgcc1-dbg libgomp1-dbg libitm1-dbg
@@ -150,9 +144,9 @@ Get:27 https://cdn-aws.deb.debian.org/debian stretch/main armhf libdpkg-perl all
 Get:28 https://cdn-aws.deb.debian.org/debian stretch/main armhf patch armhf 2.7.5-1+deb9u1 [106 kB]   
 Get:29 https://cdn-aws.deb.debian.org/debian stretch/main armhf dpkg-dev all 1.18.25 [1,595 kB]       
 Get:30 https://cdn-aws.deb.debian.org/debian stretch/main armhf build-essential armhf 12.3 [7,342 B]  
-Fetched 36.8 MB in 17s (2,149 kB/s)                                                                  
+Fetched 36.8 MB in 6s (5,292 kB/s)                                                                    
 Selecting previously unselected package perl-modules-5.24.
-(Reading database ... 15324 files and directories currently installed.)
+(Reading database ... 15254 files and directories currently installed.)
 Preparing to unpack .../00-perl-modules-5.24_5.24.1-3+deb9u5_all.deb ...
 Unpacking perl-modules-5.24 (5.24.1-3+deb9u5) ...
 Selecting previously unselected package libgdbm3:armhf.
@@ -302,9 +296,9 @@ Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf libpython-stdlib
 Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf python armhf 2.7.13-2 [154 kB]
 Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf python-pip-whl all 9.0.1-2 [1,406 kB]
 Get:9 https://cdn-aws.deb.debian.org/debian stretch/main armhf python-pip all 9.0.1-2 [179 kB]
-Fetched 5,470 kB in 2s (2,215 kB/s)
+Fetched 5,470 kB in 2s (2,280 kB/s)
 Selecting previously unselected package libpython2.7-minimal:armhf.
-(Reading database ... 20133 files and directories currently installed.)
+(Reading database ... 20063 files and directories currently installed.)
 Preparing to unpack .../0-libpython2.7-minimal_2.7.13-2+deb9u3_armhf.deb ...
 Unpacking libpython2.7-minimal:armhf (2.7.13-2+deb9u3) ...
 Selecting previously unselected package python2.7-minimal.
@@ -327,7 +321,7 @@ Setting up python2.7-minimal (2.7.13-2+deb9u3) ...
 Linking and byte-compiling packages for runtime python2.7...
 Setting up python-minimal (2.7.13-2) ...
 Selecting previously unselected package python.
-(Reading database ... 20881 files and directories currently installed.)
+(Reading database ... 20811 files and directories currently installed.)
 Preparing to unpack .../python_2.7.13-2_armhf.deb ...
 Unpacking python (2.7.13-2) ...
 Selecting previously unselected package python-pip-whl.
@@ -347,16 +341,16 @@ Reading package lists... Done
 Building dependency tree       
 Reading state information... Done
 Suggested packages:
-  openssh-server
+  openssh-client openssh-server
 The following NEW packages will be installed:
   rsync
 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
 Need to get 380 kB of archives.
 After this operation, 573 kB of additional disk space will be used.
 Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf rsync armhf 3.1.2-1+deb9u1 [380 kB]
-Fetched 380 kB in 0s (444 kB/s)
+Fetched 380 kB in 0s (495 kB/s)
 Selecting previously unselected package rsync.
-(Reading database ... 21071 files and directories currently installed.)
+(Reading database ... 21001 files and directories currently installed.)
 Preparing to unpack .../rsync_3.1.2-1+deb9u1_armhf.deb ...
 Unpacking rsync (3.1.2-1+deb9u1) ...
 Setting up rsync (3.1.2-1+deb9u1) ...
@@ -371,9 +365,9 @@ The following NEW packages will be installed:
 Need to get 234 kB of archives.
 After this operation, 797 kB of additional disk space will be used.
 Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf net-tools armhf 1.60+git20161116.90da8a0-1 [234 kB]
-Fetched 234 kB in 1s (171 kB/s)
+Fetched 234 kB in 1s (205 kB/s)
 Selecting previously unselected package net-tools.
-(Reading database ... 21102 files and directories currently installed.)
+(Reading database ... 21032 files and directories currently installed.)
 Preparing to unpack .../net-tools_1.60+git20161116.90da8a0-1_armhf.deb ...
 Unpacking net-tools (1.60+git20161116.90da8a0-1) ...
 Setting up net-tools (1.60+git20161116.90da8a0-1) ...
@@ -386,17 +380,88 @@ The following NEW packages will be installed:
 Need to get 131 kB of archives.
 After this operation, 166 kB of additional disk space will be used.
 Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf xxd armhf 2:8.0.0197-4+deb9u1 [131 kB]
-Fetched 131 kB in 0s (173 kB/s)
+Fetched 131 kB in 0s (167 kB/s)
 Selecting previously unselected package xxd.
-(Reading database ... 21158 files and directories currently installed.)
+(Reading database ... 21088 files and directories currently installed.)
 Preparing to unpack .../xxd_2%3a8.0.0197-4+deb9u1_armhf.deb ...
 Unpacking xxd (2:8.0.0197-4+deb9u1) ...
 Setting up xxd (2:8.0.0197-4+deb9u1) ...
 Collecting setuptools
-  Downloading https://files.pythonhosted.org/packages/bf/ae/a23db1762646069742cc21393833577d3fa438eecaa59d11fb04fa57fcd5/setuptools-40.7.1-py2.py3-none-any.whl (574kB)
+  Downloading https://files.pythonhosted.org/packages/82/9c/e812a9838feaf76cd9a960ca4ced3be7f2db31e473677a621d006e128db2/setuptools-40.7.3-py2.py3-none-any.whl (574kB)
-    100% |████████████████████████████████| 583kB 675kB/s 
+    100% |████████████████████████████████| 583kB 695kB/s 
 Installing collected packages: setuptools
-Successfully installed setuptools-40.7.1
+Successfully installed setuptools-40.7.3
+Reading package lists... Done
+Building dependency tree       
+Reading state information... Done
+The following additional packages will be installed:
+  netcat-traditional
+The following NEW packages will be installed:
+  netcat netcat-traditional
+0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
+Need to get 74.7 kB of archives.
+After this operation, 164 kB of additional disk space will be used.
+Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf netcat-traditional armhf 1.10-41+b1 [65.7 kB]
+Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf netcat all 1.10-41 [8,962 B]
+Fetched 74.7 kB in 1s (48.7 kB/s)
+Selecting previously unselected package netcat-traditional.
+(Reading database ... 21099 files and directories currently installed.)
+Preparing to unpack .../netcat-traditional_1.10-41+b1_armhf.deb ...
+Unpacking netcat-traditional (1.10-41+b1) ...
+Selecting previously unselected package netcat.
+Preparing to unpack .../netcat_1.10-41_all.deb ...
+Unpacking netcat (1.10-41) ...
+Setting up netcat-traditional (1.10-41+b1) ...
+update-alternatives: using /bin/nc.traditional to provide /bin/nc (nc) in auto mode
+Setting up netcat (1.10-41) ...
+Reading package lists... Done
+Building dependency tree       
+Reading state information... Done
+The following additional packages will be installed:
+  libbsd0 libedit2
+Suggested packages:
+  keychain libpam-ssh monkeysphere ssh-askpass
+Recommended packages:
+  xauth
+The following NEW packages will be installed:
+  libbsd0 libedit2 openssh-client
+0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
+Need to get 900 kB of archives.
+After this operation, 3,993 kB of additional disk space will be used.
+Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libbsd0 armhf 0.8.3-1 [89.6 kB]
+Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libedit2 armhf 3.1-20160903-3 [69.9 kB]
+Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf openssh-client armhf 1:7.4p1-10+deb9u4 [740 kB]
+Fetched 900 kB in 1s (716 kB/s)         
+Selecting previously unselected package libbsd0:armhf.
+(Reading database ... 21141 files and directories currently installed.)
+Preparing to unpack .../libbsd0_0.8.3-1_armhf.deb ...
+Unpacking libbsd0:armhf (0.8.3-1) ...
+Selecting previously unselected package libedit2:armhf.
+Preparing to unpack .../libedit2_3.1-20160903-3_armhf.deb ...
+Unpacking libedit2:armhf (3.1-20160903-3) ...
+Selecting previously unselected package openssh-client.
+Preparing to unpack .../openssh-client_1%3a7.4p1-10+deb9u4_armhf.deb ...
+Unpacking openssh-client (1:7.4p1-10+deb9u4) ...
+Setting up libbsd0:armhf (0.8.3-1) ...
+Processing triggers for libc-bin (2.24-11+deb9u3) ...
+Setting up libedit2:armhf (3.1-20160903-3) ...
+Setting up openssh-client (1:7.4p1-10+deb9u4) ...
+Processing triggers for libc-bin (2.24-11+deb9u3) ...
+Reading package lists... Done
+Building dependency tree       
+Reading state information... Done
+The following NEW packages will be installed:
+  openssh-sftp-server
+0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
+Need to get 35.2 kB of archives.
+After this operation, 74.8 kB of additional disk space will be used.
+Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf openssh-sftp-server armhf 1:7.4p1-10+deb9u4 [35.2 kB]
+Fetched 35.2 kB in 1s (35.2 kB/s)        
+Selecting previously unselected package openssh-sftp-server.
+(Reading database ... 21211 files and directories currently installed.)
+Preparing to unpack .../openssh-sftp-server_1%3a7.4p1-10+deb9u4_armhf.deb ...
+Unpacking openssh-sftp-server (1:7.4p1-10+deb9u4) ...
+Setting up openssh-sftp-server (1:7.4p1-10+deb9u4) ...
 
 *** CONFIG ***
 sudo: raspi-config: command not found
@@ -431,9 +496,9 @@ Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf dphys-swapfile al
 Get:6 https://cdn-aws.deb.debian.org/debian stretch/main armhf libonig4 armhf 6.1.3-2 [128 kB]
 Get:7 https://cdn-aws.deb.debian.org/debian stretch/main armhf libjq1 armhf 1.5+dfsg-1.3 [122 kB]
 Get:8 https://cdn-aws.deb.debian.org/debian stretch/main armhf jq armhf 1.5+dfsg-1.3 [59.2 kB]
-Fetched 5,514 kB in 1s (3,161 kB/s)
+Fetched 5,514 kB in 2s (2,743 kB/s)
 Selecting previously unselected package liberror-perl.
-(Reading database ... 21169 files and directories currently installed.)
+(Reading database ... 21215 files and directories currently installed.)
 Preparing to unpack .../0-liberror-perl_0.17024-1_all.deb ...
 Unpacking liberror-perl (0.17024-1) ...
 Selecting previously unselected package git-man.
@@ -479,9 +544,9 @@ The following NEW packages will be installed:
 Need to get 78.6 kB of archives.
 After this operation, 206 kB of additional disk space will be used.
 Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf vnstat armhf 1.15-2 [78.6 kB]
-Fetched 78.6 kB in 1s (54.1 kB/s)
+Fetched 78.6 kB in 1s (56.9 kB/s)
 Selecting previously unselected package vnstat.
-(Reading database ... 22094 files and directories currently installed.)
+(Reading database ... 22140 files and directories currently installed.)
 Preparing to unpack .../vnstat_1.15-2_armhf.deb ...
 Unpacking vnstat (1.15-2) ...
 Setting up vnstat (1.15-2) ...
@@ -510,27 +575,27 @@ Copying files from `/etc/skel' ...
 *** INCREASE OPEN FILE LIMIT ***
 
 *** BITCOIN ***
---2019-01-30 12:58:46--  https://bitcoin.org/bin/bitcoin-core-0.17.0.1/bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz
+--2019-02-04 10:05:05--  https://bitcoin.org/bin/bitcoin-core-0.17.0.1/bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz
 Resolving bitcoin.org (bitcoin.org)... 138.68.248.245
 Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected.
 HTTP request sent, awaiting response... 200 OK
 Length: 24306145 (23M) [application/octet-stream]
 Saving to: ‘bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz’
 
-bitcoin-0.17.0.1-arm-linu 100%[===================================>]  23.18M   201KB/s    in 1m 59s  
+bitcoin-0.17.0.1-arm-linu 100%[====================================>]  23.18M   202KB/s    in 1m 59s  
 
-2019-01-30 13:00:46 (200 KB/s) - ‘bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz’ saved [24306145/24306145]
+2019-02-04 10:07:04 (200 KB/s) - ‘bitcoin-0.17.0.1-arm-linux-gnueabihf.tar.gz’ saved [24306145/24306145]
 
---2019-01-30 13:00:46--  https://bitcoin.org/laanwj-releases.asc
+--2019-02-04 10:07:05--  https://bitcoin.org/laanwj-releases.asc
 Resolving bitcoin.org (bitcoin.org)... 138.68.248.245
 Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected.
 HTTP request sent, awaiting response... 200 OK
 Length: 17940 (18K) [application/octet-stream]
 Saving to: ‘laanwj-releases.asc’
 
-laanwj-releases.asc       100%[===================================>]  17.52K  --.-KB/s    in 0.001s  
+laanwj-releases.asc       100%[====================================>]  17.52K  --.-KB/s    in 0.001s  
 
-2019-01-30 13:00:47 (17.7 MB/s) - ‘laanwj-releases.asc’ saved [17940/17940]
+2019-02-04 10:07:06 (19.1 MB/s) - ‘laanwj-releases.asc’ saved [17940/17940]
 
 key 90C8019E36C2E964:
 25 signatures not checked due to missing keys
@@ -539,16 +604,16 @@ gpg: key 90C8019E36C2E964: public key "Wladimir J. van der Laan (Bitcoin Core bi
 gpg: Total number processed: 1
 gpg:               imported: 1
 gpg: no ultimately trusted keys found
---2019-01-30 13:00:48--  https://bitcoin.org/bin/bitcoin-core-0.17.0.1/SHA256SUMS.asc
+--2019-02-04 10:07:07--  https://bitcoin.org/bin/bitcoin-core-0.17.0.1/SHA256SUMS.asc
 Resolving bitcoin.org (bitcoin.org)... 138.68.248.245
 Connecting to bitcoin.org (bitcoin.org)|138.68.248.245|:443... connected.
 HTTP request sent, awaiting response... 200 OK
 Length: 1979 (1.9K) [application/octet-stream]
 Saving to: ‘SHA256SUMS.asc’
 
-SHA256SUMS.asc            100%[===================================>]   1.93K  --.-KB/s    in 0s      
+SHA256SUMS.asc            100%[====================================>]   1.93K  --.-KB/s    in 0.006s  
 
-2019-01-30 13:00:49 (21.8 MB/s) - ‘SHA256SUMS.asc’ saved [1979/1979]
+2019-02-04 10:07:08 (303 KB/s) - ‘SHA256SUMS.asc’ saved [1979/1979]
 
 goodSignature(1)
 correctKey(1)
@@ -574,16 +639,16 @@ bitcoin-0.17.0/share/man/man1/bitcoin-qt.1
 bitcoin-0.17.0/share/man/man1/bitcoin-tx.1
 
 *** LITECOIN ***
---2019-01-30 13:00:54--  https://download.litecoin.org/litecoin-0.16.3/linux/litecoin-0.16.3-arm-linux-gnueabihf.tar.gz
+--2019-02-04 10:07:13--  https://download.litecoin.org/litecoin-0.16.3/linux/litecoin-0.16.3-arm-linux-gnueabihf.tar.gz
 Resolving download.litecoin.org (download.litecoin.org)... 104.27.4.55, 104.27.5.55
 Connecting to download.litecoin.org (download.litecoin.org)|104.27.4.55|:443... connected.
 HTTP request sent, awaiting response... 200 OK
 Length: 9568024 (9.1M) [application/octet-stream]
 Saving to: ‘litecoin-0.16.3-arm-linux-gnueabihf.tar.gz’
 
-litecoin-0.16.3-arm-linux 100%[===================================>]   9.12M  6.83MB/s    in 1.3s    
+litecoin-0.16.3-arm-linux 100%[====================================>]   9.12M  5.23MB/s    in 1.7s    
 
-2019-01-30 13:00:56 (6.83 MB/s) - ‘litecoin-0.16.3-arm-linux-gnueabihf.tar.gz’ saved [9568024/9568024]
+2019-02-04 10:07:15 (5.23 MB/s) - ‘litecoin-0.16.3-arm-linux-gnueabihf.tar.gz’ saved [9568024/9568024]
 
 litecoin-0.16.3/
 litecoin-0.16.3/bin/
@@ -599,64 +664,64 @@ litecoin-0.16.3/share/man/man1/litecoind.1
 litecoin-0.16.3/share/man/man1/litecoin-tx.1
 
 *** LND ***
---2019-01-30 13:00:57--  https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/lnd-linux-armv7-v0.5.1-beta.tar.gz
+--2019-02-04 10:07:16--  https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/lnd-linux-armv7-v0.5.1-beta.tar.gz
-Resolving github.com (github.com)... 140.82.118.4, 140.82.118.3
+Resolving github.com (github.com)... 140.82.118.3, 140.82.118.4
-Connecting to github.com (github.com)|140.82.118.4|:443... connected.
+Connecting to github.com (github.com)|140.82.118.3|:443... connected.
 HTTP request sent, awaiting response... 302 Found
-Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fd08b500-f311-11e8-8398-419cca1df903?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190130%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190130T130058Z&X-Amz-Expires=300&X-Amz-Signature=f7059455b0bef670622c3a5a681ce038f5469e3f0ea3e2fe3050ef26d77d5f57&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlnd-linux-armv7-v0.5.1-beta.tar.gz&response-content-type=application%2Foctet-stream [following]
+Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fd08b500-f311-11e8-8398-419cca1df903?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190204T100716Z&X-Amz-Expires=300&X-Amz-Signature=55bf712cd42a2425f68d2a08b5a05c37303ec6334d4cbdd0941b53304aa1fc8d&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlnd-linux-armv7-v0.5.1-beta.tar.gz&response-content-type=application%2Foctet-stream [following]
---2019-01-30 13:00:58--  https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fd08b500-f311-11e8-8398-419cca1df903?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190130%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190130T130058Z&X-Amz-Expires=300&X-Amz-Signature=f7059455b0bef670622c3a5a681ce038f5469e3f0ea3e2fe3050ef26d77d5f57&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlnd-linux-armv7-v0.5.1-beta.tar.gz&response-content-type=application%2Foctet-stream
+--2019-02-04 10:07:16--  https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fd08b500-f311-11e8-8398-419cca1df903?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190204T100716Z&X-Amz-Expires=300&X-Amz-Signature=55bf712cd42a2425f68d2a08b5a05c37303ec6334d4cbdd0941b53304aa1fc8d&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dlnd-linux-armv7-v0.5.1-beta.tar.gz&response-content-type=application%2Foctet-stream
-Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.97.155
+Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.108.139
-Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.97.155|:443... connected.
+Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.108.139|:443... connected.
 HTTP request sent, awaiting response... 200 OK
 Length: 19198203 (18M) [application/octet-stream]
 Saving to: ‘lnd-linux-armv7-v0.5.1-beta.tar.gz’
 
-lnd-linux-armv7-v0.5.1-be 100%[===================================>]  18.31M  4.47MB/s    in 5.9s    
+lnd-linux-armv7-v0.5.1-be 100%[====================================>]  18.31M  5.28MB/s    in 4.9s    
 
-2019-01-30 13:01:04 (3.09 MB/s) - ‘lnd-linux-armv7-v0.5.1-beta.tar.gz’ saved [19198203/19198203]
+2019-02-04 10:07:22 (3.73 MB/s) - ‘lnd-linux-armv7-v0.5.1-beta.tar.gz’ saved [19198203/19198203]
 
---2019-01-30 13:01:04--  https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/manifest-v0.5.1-beta.txt
+--2019-02-04 10:07:22--  https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/manifest-v0.5.1-beta.txt
-Resolving github.com (github.com)... 140.82.118.3, 140.82.118.4
+Resolving github.com (github.com)... 140.82.118.4, 140.82.118.3
-Connecting to github.com (github.com)|140.82.118.3|:443... connected.
+Connecting to github.com (github.com)|140.82.118.4|:443... connected.
 HTTP request sent, awaiting response... 302 Found
-Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-9178-5d26551a454e?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190130%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190130T130104Z&X-Amz-Expires=300&X-Amz-Signature=c21335d71e74e519985c3b11a946647d499cfc143672326159bd0d436c7bbf32&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt&response-content-type=application%2Foctet-stream [following]
+Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-9178-5d26551a454e?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190204T100725Z&X-Amz-Expires=300&X-Amz-Signature=838d29594d525c1ab751e105b36d4e7838cfe37b2ee5c10e9ddd8582691beb58&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt&response-content-type=application%2Foctet-stream [following]
---2019-01-30 13:01:05--  https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-9178-5d26551a454e?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190130%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190130T130104Z&X-Amz-Expires=300&X-Amz-Signature=c21335d71e74e519985c3b11a946647d499cfc143672326159bd0d436c7bbf32&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt&response-content-type=application%2Foctet-stream
+--2019-02-04 10:07:25--  https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-9178-5d26551a454e?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190204T100725Z&X-Amz-Expires=300&X-Amz-Signature=838d29594d525c1ab751e105b36d4e7838cfe37b2ee5c10e9ddd8582691beb58&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt&response-content-type=application%2Foctet-stream
-Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.128.99
+Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.238.51
-Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.128.99|:443... connected.
+Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.238.51|:443... connected.
 HTTP request sent, awaiting response... 200 OK
 Length: 2026 (2.0K) [application/octet-stream]
 Saving to: ‘manifest-v0.5.1-beta.txt’
 
-manifest-v0.5.1-beta.txt  100%[===================================>]   1.98K  --.-KB/s    in 0.001s  
+manifest-v0.5.1-beta.txt  100%[====================================>]   1.98K  --.-KB/s    in 0.002s  
 
-2019-01-30 13:01:05 (3.21 MB/s) - ‘manifest-v0.5.1-beta.txt’ saved [2026/2026]
+2019-02-04 10:07:26 (1007 KB/s) - ‘manifest-v0.5.1-beta.txt’ saved [2026/2026]
 
---2019-01-30 13:01:05--  https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/manifest-v0.5.1-beta.txt.sig
+--2019-02-04 10:07:26--  https://github.com/lightningnetwork/lnd/releases/download/v0.5.1-beta/manifest-v0.5.1-beta.txt.sig
-Resolving github.com (github.com)... 140.82.118.4, 140.82.118.3
+Resolving github.com (github.com)... 140.82.118.3, 140.82.118.4
-Connecting to github.com (github.com)|140.82.118.4|:443... connected.
+Connecting to github.com (github.com)|140.82.118.3|:443... connected.
 HTTP request sent, awaiting response... 302 Found
-Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-8fb5-c3aa7d97cb88?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190130%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190130T130105Z&X-Amz-Expires=300&X-Amz-Signature=fa1ada66979a4c95d3fd7cf5966a2a869fc9bb9efbe72f9d3b981fa1da035234&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt.sig&response-content-type=application%2Foctet-stream [following]
+Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-8fb5-c3aa7d97cb88?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190204T100726Z&X-Amz-Expires=300&X-Amz-Signature=ce7ec6f0a9944f66f01b5cac9babfc21c8ffb52fb85b90a78b30a76115661da5&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt.sig&response-content-type=application%2Foctet-stream [following]
---2019-01-30 13:01:06--  https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-8fb5-c3aa7d97cb88?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190130%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190130T130105Z&X-Amz-Expires=300&X-Amz-Signature=fa1ada66979a4c95d3fd7cf5966a2a869fc9bb9efbe72f9d3b981fa1da035234&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt.sig&response-content-type=application%2Foctet-stream
+--2019-02-04 10:07:26--  https://github-production-release-asset-2e65be.s3.amazonaws.com/49765480/fe39e200-f311-11e8-8fb5-c3aa7d97cb88?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20190204%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20190204T100726Z&X-Amz-Expires=300&X-Amz-Signature=ce7ec6f0a9944f66f01b5cac9babfc21c8ffb52fb85b90a78b30a76115661da5&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dmanifest-v0.5.1-beta.txt.sig&response-content-type=application%2Foctet-stream
-Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.128.99
+Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 52.216.238.51
-Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.128.99|:443... connected.
+Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|52.216.238.51|:443... connected.
 HTTP request sent, awaiting response... 200 OK
 Length: 566 [application/octet-stream]
 Saving to: ‘manifest-v0.5.1-beta.txt.sig’
 
-manifest-v0.5.1-beta.txt. 100%[===================================>]     566  --.-KB/s    in 0s      
+manifest-v0.5.1-beta.txt. 100%[====================================>]     566  --.-KB/s    in 0.001s  
 
-2019-01-30 13:01:06 (7.61 MB/s) - ‘manifest-v0.5.1-beta.txt.sig’ saved [566/566]
+2019-02-04 10:07:27 (935 KB/s) - ‘manifest-v0.5.1-beta.txt.sig’ saved [566/566]
 
---2019-01-30 13:01:06--  https://keybase.io/roasbeef/pgp_keys.asc
+--2019-02-04 10:07:27--  https://keybase.io/roasbeef/pgp_keys.asc
-Resolving keybase.io (keybase.io)... 52.6.136.121, 52.55.1.130
+Resolving keybase.io (keybase.io)... 52.55.1.130, 52.6.136.121
-Connecting to keybase.io (keybase.io)|52.6.136.121|:443... connected.
+Connecting to keybase.io (keybase.io)|52.55.1.130|:443... connected.
 HTTP request sent, awaiting response... 200 OK
 Length: 6909 (6.7K) [text/plain]
 Saving to: ‘pgp_keys.asc’
 
-pgp_keys.asc              100%[===================================>]   6.75K  --.-KB/s    in 0s      
+pgp_keys.asc              100%[====================================>]   6.75K  --.-KB/s    in 0s      
 
-2019-01-30 13:01:07 (87.9 MB/s) - ‘pgp_keys.asc’ saved [6909/6909]
+2019-02-04 10:07:28 (59.0 MB/s) - ‘pgp_keys.asc’ saved [6909/6909]
 
 gpg: key 8B80CD2BB8BD8132: public key "Olaoluwa Osuntokun <laolu32@gmail.com>" imported
 gpg: Total number processed: 1
@@ -664,16 +729,16 @@ gpg:               imported: 1
 goodSignature(1)
 correctKey(1)
 *** Installing Go ***
---2019-01-30 13:01:14--  https://storage.googleapis.com/golang/go1.11.linux-armv6l.tar.gz
+--2019-02-04 10:07:35--  https://storage.googleapis.com/golang/go1.11.linux-armv6l.tar.gz
-Resolving storage.googleapis.com (storage.googleapis.com)... 216.58.198.176, 2a00:1450:4009:80c::2010
+Resolving storage.googleapis.com (storage.googleapis.com)... 216.58.206.80, 2a00:1450:4009:809::2010
-Connecting to storage.googleapis.com (storage.googleapis.com)|216.58.198.176|:443... connected.
+Connecting to storage.googleapis.com (storage.googleapis.com)|216.58.206.80|:443... connected.
 HTTP request sent, awaiting response... 200 OK
 Length: 101718267 (97M) [application/octet-stream]
 Saving to: ‘go1.11.linux-armv6l.tar.gz’
 
-go1.11.linux-armv6l.tar.g 100%[===================================>]  97.01M  4.66MB/s    in 32s     
+go1.11.linux-armv6l.tar.g 100%[====================================>]  97.01M  8.63MB/s    in 11s     
 
-2019-01-30 13:01:47 (3.04 MB/s) - ‘go1.11.linux-armv6l.tar.gz’ saved [101718267/101718267]
+2019-02-04 10:07:47 (8.86 MB/s) - ‘go1.11.linux-armv6l.tar.gz’ saved [101718267/101718267]
 
 
 
@@ -688,9 +753,9 @@ The following NEW packages will be installed:
 Need to get 240 kB of archives.
 After this operation, 883 kB of additional disk space will be used.
 Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf dialog armhf 1.3-20160828-2 [240 kB]
-Fetched 240 kB in 0s (302 kB/s)
+Fetched 240 kB in 0s (248 kB/s)
 Selecting previously unselected package dialog.
-(Reading database ... 22109 files and directories currently installed.)
+(Reading database ... 22155 files and directories currently installed.)
 Preparing to unpack .../dialog_1.3-20160828-2_armhf.deb ...
 Unpacking dialog (1.3-20160828-2) ...
 Setting up dialog (1.3-20160828-2) ...
@@ -709,9 +774,9 @@ After this operation, 426 kB of additional disk space will be used.
 Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libfuse2 armhf 2.9.7-1+deb9u2 [116 kB]
 Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf fuse armhf 2.9.7-1+deb9u2 [70.3 kB]
 Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf exfat-fuse armhf 1.2.5-2 [27.6 kB]
-Fetched 214 kB in 1s (184 kB/s)       
+Fetched 214 kB in 1s (148 kB/s)  
 Selecting previously unselected package libfuse2:armhf.
-(Reading database ... 22267 files and directories currently installed.)
+(Reading database ... 22313 files and directories currently installed.)
 Preparing to unpack .../libfuse2_2.9.7-1+deb9u2_armhf.deb ...
 Unpacking libfuse2:armhf (2.9.7-1+deb9u2) ...
 Selecting previously unselected package fuse.
@@ -729,9 +794,9 @@ Processing triggers for initramfs-tools (0.130) ...
 ln: failed to create hard link '/boot/initrd.img-4.14.66+.dpkg-bak' => '/boot/initrd.img-4.14.66+': Operation not permitted
 update-initramfs: Generating /boot/initrd.img-4.14.66+
 Image Name:   uInitrd
-Created:      Wed Jan 30 13:02:11 2019
+Created:      Mon Feb  4 10:08:42 2019
 Image Type:   ARM Linux RAMDisk Image (uncompressed)
-Data Size:    5715861 Bytes = 5581.90 kB = 5.45 MB
+Data Size:    5715880 Bytes = 5581.91 kB = 5.45 MB
 Load Address: 00000000
 Entry Point:  00000000
 Reading package lists... Done
@@ -753,9 +818,9 @@ Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libminiupnpc10 ar
 Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf libnatpmp1 armhf 20110808-4+b1 [8,338 B]
 Get:4 https://cdn-aws.deb.debian.org/debian stretch/main armhf transmission-common all 2.92-2+deb9u1 [288 kB]
 Get:5 https://cdn-aws.deb.debian.org/debian stretch/main armhf transmission-cli armhf 2.92-2+deb9u1 [320 kB]
-Fetched 776 kB in 1s (747 kB/s)       
+Fetched 776 kB in 0s (823 kB/s)           
 Selecting previously unselected package libevent-2.0-5:armhf.
-(Reading database ... 22302 files and directories currently installed.)
+(Reading database ... 22348 files and directories currently installed.)
 Preparing to unpack .../libevent-2.0-5_2.0.21-stable-3_armhf.deb ...
 Unpacking libevent-2.0-5:armhf (2.0.21-stable-3) ...
 Selecting previously unselected package libminiupnpc10:armhf.
@@ -792,9 +857,9 @@ After this operation, 2,281 kB of additional disk space will be used.
 Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf libxmlrpc-core-c3 armhf 1.33.14-4 [128 kB]
 Get:2 https://cdn-aws.deb.debian.org/debian stretch/main armhf libtorrent19 armhf 0.13.6-1.1 [345 kB]
 Get:3 https://cdn-aws.deb.debian.org/debian stretch/main armhf rtorrent armhf 0.9.6-2+b1 [418 kB]
-Fetched 891 kB in 1s (488 kB/s)
+Fetched 891 kB in 1s (630 kB/s)
 Selecting previously unselected package libxmlrpc-core-c3.
-(Reading database ... 22443 files and directories currently installed.)
+(Reading database ... 22489 files and directories currently installed.)
 Preparing to unpack .../libxmlrpc-core-c3_1.33.14-4_armhf.deb ...
 Unpacking libxmlrpc-core-c3 (1.33.14-4) ...
 Selecting previously unselected package libtorrent19:armhf.
@@ -818,21 +883,21 @@ The following NEW packages will be installed:
 Need to get 568 kB of archives.
 After this operation, 860 kB of additional disk space will be used.
 Get:1 https://cdn-aws.deb.debian.org/debian stretch/main armhf screen armhf 4.5.0-6 [568 kB]
-Fetched 568 kB in 0s (735 kB/s)
+Fetched 568 kB in 0s (677 kB/s)
 Selecting previously unselected package screen.
-(Reading database ... 22480 files and directories currently installed.)
+(Reading database ... 22526 files and directories currently installed.)
 Preparing to unpack .../screen_4.5.0-6_armhf.deb ...
 Unpacking screen (4.5.0-6) ...
 Processing triggers for systemd (232-25+deb9u8) ...
 Setting up screen (4.5.0-6) ...
 Processing triggers for systemd (232-25+deb9u8) ...
 Cloning into 'raspiblitz'...
-remote: Enumerating objects: 260, done.
+remote: Enumerating objects: 61, done.
-remote: Counting objects: 100% (260/260), done.
+remote: Counting objects: 100% (61/61), done.
-remote: Compressing objects: 100% (192/192), done.
+remote: Compressing objects: 100% (33/33), done.
-remote: Total 5034 (delta 152), reused 151 (delta 68), pack-reused 4774
+remote: Total 5134 (delta 32), reused 51 (delta 27), pack-reused 5073
-Receiving objects: 100% (5034/5034), 23.64 MiB | 6.52 MiB/s, done.
+Receiving objects: 100% (5134/5134), 23.70 MiB | 5.49 MiB/s, done.
-Resolving deltas: 100% (3522/3522), done.
+Resolving deltas: 100% (3603/3603), done.
 cp: -r not specified; omitting directory '/home/admin/raspiblitz/home.admin/config.scripts'
 bash: /home/pi/.bashrc: No such file or directory
 bash: /home/pi/.bashrc: No such file or directory
@@ -853,7 +918,7 @@ The following NEW packages will be installed:
 Need to get 0 B/288 kB of archives.
 After this operation, 1,321 kB of additional disk space will be used.
 Selecting previously unselected package fail2ban.
-(Reading database ... 22540 files and directories currently installed.)
+(Reading database ... 22586 files and directories currently installed.)
 Preparing to unpack .../fail2ban_0.9.6-2_all.deb ...
 Unpacking fail2ban (0.9.6-2) ...
 Setting up fail2ban (0.9.6-2) ...
@@ -877,31 +942,15 @@ dirmngr is already the newest version (2.1.18-8~deb9u3).
 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
 
 *** Fetching GPG key ***
-uid  deb.torproject.org archive signing key
+gpg: packet(13) too large
-sig!3        EE8CBC9E886DDD89 2012-08-29  [self-signature]
+gpg: read_block: read error: Invalid packet
-sig!3        EE8CBC9E886DDD89 2014-08-31  [self-signature]
+gpg: no valid OpenPGP data found.
-sig!3        EE8CBC9E886DDD89 2009-09-04  [self-signature]
+gpg: Total number processed: 0
-sig!3        EE8CBC9E886DDD89 2018-08-06  [self-signature]
+gpg: WARNING: nothing exported
-sub  74A941BA219EC810
+gpg: no valid OpenPGP data found.
-sig!         EE8CBC9E886DDD89 2012-08-29  [self-signature]
-sig!         EE8CBC9E886DDD89 2014-08-31  [self-signature]
-sig!         EE8CBC9E886DDD89 2009-09-04  [self-signature]
-sig!         EE8CBC9E886DDD89 2018-08-06  [self-signature]
-key EE8CBC9E886DDD89:
-2 duplicate signatures removed
-82 signatures not checked due to missing keys
-gpg: key EE8CBC9E886DDD89: public key "deb.torproject.org archive signing key" imported
-gpg: key 8E4F3C64886DDD89: public key "Totally Legit Signing Key <mallory@example.org>" imported
-gpg: no ultimately trusted keys found
-gpg: Total number processed: 2
-gpg:               imported: 2
-key EE8CBC9E886DDD89:
-82 signatures not checked due to missing keys
-OK
 gpg: keyserver receive failed: No data
-key EE8CBC9E886DDD89:
+gpg: WARNING: nothing exported
-82 signatures not checked due to missing keys
+gpg: no valid OpenPGP data found.
-OK
 !!!!!! Please check if the above really worked!
 
 **********************************************
@@ -919,61 +968,7 @@ IMPORTANT IF WANT TO MAKE A RELEASE IMAGE FROM THIS BUILD:
 login once after reboot without HDD and run 'XXprepareRelease.sh'
 
 Press ENTER to install LCD and reboot ...
-
 sudo: raspi-config: command not found
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-          ┌──────────────────────────────────Display─────────────────────────────────────┐
-          │ Are you using the default display available from Amazon?                     │  
-          │ Select 'No' if you are using the Swiss version from play-zone.ch!            │  
-          ├──────────────────────────────────────────────────────────────────────────────┤  
-          │                         < Yes >             < No  >                          │  
-          └──────────────────────────────────────────────────────────────────────────────┘  
-            
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
 E: Unable to locate package raspberrypi-bootloader
 E: No packages found
 Cloning into 'LCD-show'...
@@ -989,4 +984,3 @@ cp: cannot create regular file '/usr/share/X11/xorg.conf.d/': Not a directory
 this is not raspberrypi kernel, no need to update touch configure, reboot
 Connection to 192.168.1.175 closed by remote host.
 Connection to 192.168.1.175 closed.
-