All the info texts on power & heat problems

home.admin/05hardwareTest.sh

@@ -34,23 +34,77 @@ showPowerImproveInfo=0
 if [ ${powerWARN} -gt 0 ]; then
   showPowerImproveInfo=1
   if [ ${powerFAIL} -gt 0 ]; then
-    echo "TODO: show power FAIL info: ${powerMIN}"
+    whiptail --backtitle "RaspiBlitz v${codeVersion} - ${powerMIN}" --title " POWER SUPPLY FAIL " --msgbox "
+Your power supply was FAILING the stress test (${powerMIN}).
+Most reports of data loss are caused by weak power supplies.
+Also a lot of RaspiBlitz setups fail because of weak power supplies.
+To SHUTDOWN and upgrade the Power Supply is HIGHLY RECOMMENDED.
+
+See upcomming screen on detailed info how to improve on power supply.
+
+" 14 78
   else
-    echo "TODO: show power WARN info: ${powerMIN}"
+    whiptail --backtitle "RaspiBlitz v${codeVersion} - ${powerMIN}" --title " Power Supply Warning " --msgbox "
+Your power supply seems OK - but could be better for stable operations.
+A replacement/upgrade of the Power Supply is recommended if possible.
+Because most reports of data loss are caused by weak power supplies.
+
+See upcomming screen on detailed info how to improve on power supply.
+
+" 12 78
   fi
 fi
 
 if [ ${#undervoltageReports} -gt 0 ]; then
   if [ ${undervoltageReports} -gt 0 ]; then
     showPowerImproveInfo=1
-    echo "TODO: show Undervoltage Info info: ${undervoltageReports}"
+    whiptail --backtitle "RaspiBlitz v${codeVersion}" --title " Runtime Undervoltages Detected " --msgbox "
+Already during runtime of RaspiBlitz Undervoltage Reports were detected.
+A upgrade of the Power Supply is strongly recommended (see next screen).
+
+You should see the number of outages on your LCD as an ongoing counting.
+Note that after replacement of power supply this number is not set to 0. 
+As long that counting is not going further up you are good.
+
+" 13 78
   fi
 fi
 
 if [ ${showPowerImproveInfo} -gt 0 ]; then
-    echo "TODO: Tell user how to improve Power"
-    # tell that sometimes a test rerun is needed
-    # tell users if they have a power supply from the shopping list, they should report in
+
+    whiptail --backtitle "RaspiBlitz v${codeVersion}" --title " What todo on Power Issues " --msgbox "
+To improve on power issues an upgrade of the power supply is recommended.
+Check if you have the latest power supply listed in your shopping list.
+If you have that one, please report on GitHub that alternative is needed.
+
+In general a good power supply needs to fullfill this three points:
+- needs to deliver at least 3 Ampere
+- needs to deliver a stable >=5V output (big & clunky is good)
+- needs a thick cable (low AWG score) & best is no switch
+
+If you think all is good with your power supply please also re-run test
+up to 3 times. Sometimes a good power supply has 1 or 2 bad measurements. 
+
+" 18 78
+
+    choice=$(whiptail --backtitle "RaspiBlitz v${codeVersion}" --title " Hardware Check " --menu "What todo about Power Issues?" 12 60 6 \
+TESTAGAIN "Run Test again to be sure." \
+CONTINUE "I take the risk - continue." \
+SHUTDOWN "Shutdown to change hardware." 3>&1 1>&2 2>&3)
+    if [ ${#choice} -eq 0 ]; then
+      choice="CONTINUE"
+    fi
+    if [ "${choice}" == "TESTAGAIN" ]; then
+      echo "Shutting down ..."
+      sudo /home/admin/05hardwareTest.sh
+      exit 0
+    elif [ "${choice}" == "SHUTDOWN" ]; then
+      echo "Shutting down ..."
+      sudo shutdown now
+      exit 1
+    else
+      echo "OK continue .."
+    fi
 fi
 
 # check for heat issues
@@ -58,32 +112,48 @@ showHeatImproveInfo=0
 if [ ${tempWARN} -gt 0 ]; then
   showHeatImproveInfo=1
   if [ ${tempFAIL} -gt 0 ]; then
-    echo "TODO: show heat FAIL info: ${heatMAX}"
+    whiptail --backtitle "RaspiBlitz v${codeVersion} - ${tempMAX}" --title " HEAT MANAGEMENT FAIL " --msgbox "
+Your RaspiBlitz is getting MUCH TOO HOT (${tempMAX}).
+The system is getting very slow when hot - thats not a NO GO but bad.
+An upgrade of the Heat Management is HIGHLY RECOMMENDED.
+
+See upcomming screen on detailed info how to improve heat management.
+
+" 12 78
   else
-    echo "TODO: show heat WARN info: ${heatMAX}"
+    whiptail --backtitle "RaspiBlitz v${codeVersion} - ${tempMAX}" --title " Heat Management Warning " --msgbox "
+Your RaspiBlitz is getting a bit too hot (${tempMAX}).
+The system is getting slow when hot - thats not a NO GO but bad.
+An upgrade of the Heat Management is recommended if possible.
+
+See upcomming screen on detailed info how to improve heat management.
+
+" 12 78
   fi
 fi
 
 if [ ${showHeatImproveInfo} -gt 0 ]; then
-    echo "TODO: Tell user how to improve Heat"
-fi
  
-if [ ${showPowerImproveInfo} -eq 0 ] && [ ${showHeatImproveInfo} -eq 0 ]; then
-          dialog --backtitle "RaspiBlitz v${codeVersion}" --title " Hardware Check " --msgbox "
-RaspiBlitz hardware setup looks good :)
-Your are ready to continue - have fun.
+    whiptail --backtitle "RaspiBlitz v${codeVersion}" --title " What todo on Heat Issues " --msgbox "
+To improve on heat issues an upgrade of the casing is recommended.
+Check if you have the latest casing listed in your shopping list.
+The lastest casing is a big heat sink to prevent overheating.
+If you have that one, check if its apllied correctly to CPU.
+Alternative casings should add some passive/active heat sinks.
+In extreme cases consider some external fan helping out.
 
-" 8 43
-fi
+Again a RaspiBlitz getting hot can be tolerated. But it is
+slowing down your CPU and may reduce the lifetime of hardware. 
 
-choice=$(whiptail --backtitle "RaspiBlitz v${codeVersion}" --title " Hardware Check " --menu "What todo about Power Issues?" 12 60 6 \
+" 16 72
+
+    choice=$(whiptail --backtitle "RaspiBlitz v${codeVersion}" --title " Hardware Check " --menu "What todo about Heat Issues?" 12 60 6 \
 TESTAGAIN "Run Test again to be sure." \
 CONTINUE "I take the risk - continue." \
 SHUTDOWN "Shutdown to change hardware." 3>&1 1>&2 2>&3)
     if [ ${#choice} -eq 0 ]; then
       choice="CONTINUE"
     fi
-echo "User eneterd (${choice})"
     if [ "${choice}" == "TESTAGAIN" ]; then
       echo "Shutting down ..."
       sudo /home/admin/05hardwareTest.sh
@@ -95,3 +165,13 @@ elif [ "${choice}" == "SHUTDOWN" ]; then
     else
       echo "OK continue .."
     fi
+
+fi
+
+if [ ${showPowerImproveInfo} -eq 0 ] && [ ${showHeatImproveInfo} -eq 0 ]; then
+          dialog --backtitle "RaspiBlitz v${codeVersion}" --title " Hardware Check " --msgbox "
+RaspiBlitz hardware setup looks good :)
+Your are ready to continue - have fun.
+
+" 8 43
+fi