added read key to disconenct 2nd HDD after copy

build.sdcard/raspbianStretchDesktop.sh

@@ -27,7 +27,7 @@ echo "will use code from branch --> '${wantedBranch}'"
 
 # 2nd optional parameter is the GITHUB-USERNAME to get code from when
 # provisioning sd card with raspiblitz assets/scripts later on
-# if 2nd paramter is used - 1st is mandatory
+# if 2nd parameter is used - 1st is mandatory
 echo "*** CHECK INPUT PARAMETERS ***"
 githubUser="$2"
 if [ ${#githubUser} -eq 0 ]; then

dietpi/install_on_DietPi.md

@@ -1,7 +1,7 @@
 # ⚡️ this setup is tested on an ODroid HC1 ⚡️
 ![](pictures/DroidBlitz.jpg)
 
-there is no LCD, but the [hardware specs](hw_comparison.md) are convincing: 
+there is no LCD, but the [hardware specs](hw_comparison.md) make up for it.
 
 
 ## Setting up the DietPi OS
@@ -59,9 +59,10 @@ Should end up here on version v6.20.6 or higher:
 run the SDcard build script in this format:
 `wget https://raw.githubusercontent.com/[GITHUB-USERNAME]/raspiblitz/[BRANCH]/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh [BRANCH] [GITHUB-USERNAME]`
 
+Be aware of that the fork needs to be called `raspiblitz` for the git download to work.
 if you intend to use @openoms`s forked version:
 
-`wget https://raw.githubusercontent.com/openoms/HardwareNode/raspiblitz-dev/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh raspiblitz-dev openoms`
+`wget https://raw.githubusercontent.com/openoms/raspiblitz/raspiblitz-dev/build.sdcard/raspbianStretchDesktop.sh && sudo bash raspbianStretchDesktop.sh raspiblitz-dev openoms`
 
 See my example output: [sdcard_build_output](DietPi/sdcard_build_output)  
 

home.admin/50adapterHDD.sh

@@ -126,7 +126,10 @@ sudo rsync --append --info=progress2 -a /mnt/genesis/bitcoin/blocks /mnt/hdd/bit
 sudo umount -l /mnt/genesis
 echo "OK - Copy done :)"
 echo ""
-echo "---> You can now disconnect the 2nd HDD"
+# echo "---> You can now disconnect the 2nd HDD"
+# If the Odorid HC1 reboots with a HDD attached to the USB it prioritises it over the SATA
+echo "---> Disconnect the 2nd HDD and press a Enter"
+read key
 
 # set SetupState
 # sudo sed -i "s/^setupStep=.*/setupStep=50/g" /home/admin/raspiblitz.info