openoms
6 years ago
7 changed files with 536 additions and 9 deletions
@ -0,0 +1,256 @@ |
|||
# IMPORTANT: |
|||
# - Modifications to /boot/dietpi.txt will not be preserved on reboot. |
|||
# - Please ensure you edit from the DietPi-RAMdisk location: /DietPi/dietpi.txt |
|||
|
|||
# NB: This is intended for advanced users, unless you know what you are doing, do not edit this file. Please use the DietPi programs instead. |
|||
# NB: Do not remove uncommented lines, as the items are scraped by DietPi programs, on demand. |
|||
|
|||
#------------------------------------------------------------------------------------------------------ |
|||
# D I E T - P I |
|||
# DietPi-Automation settings, applied on the 1st boot of DietPi, ONCE |
|||
#------------------------------------------------------------------------------------------------------ |
|||
|
|||
##### Networking Options ##### |
|||
|
|||
# If both Ethernet and Wifi are enabled, Wifi will take priority and Ethernet will be disabled. |
|||
# 1=enabled |
|||
AUTO_SETUP_NET_ETHERNET_ENABLED=1 |
|||
AUTO_SETUP_NET_WIFI_ENABLED=0 |
|||
|
|||
# If using WiFi, please edit the following to pre-enter creds /boot/dietpi-wifi.txt |
|||
|
|||
# Enter your Static Network details below, if applicable. |
|||
AUTO_SETUP_NET_USESTATIC=0 |
|||
AUTO_SETUP_NET_STATIC_IP=192.168.0.100 |
|||
AUTO_SETUP_NET_STATIC_MASK=255.255.255.0 |
|||
AUTO_SETUP_NET_STATIC_GATEWAY=192.168.0.1 |
|||
AUTO_SETUP_NET_STATIC_DNS=8.8.8.8 |
|||
|
|||
# Hostname |
|||
AUTO_SETUP_NET_HOSTNAME=DietPi |
|||
|
|||
# Force ethernet speeds |
|||
# NB: This is mainly aimed at Pine A64's which may have an HW issue that causes unstable 1Gbit link. |
|||
# 0=automatic speed | 10 = 10mbit, 100 = 100mbit etc |
|||
AUTO_SETUP_NET_ETH_FORCE_SPEED=0 |
|||
|
|||
##### Misc Options ##### |
|||
|
|||
# Size of swapfile to generate (MB) |
|||
# 0=Disabled | 1=auto (2GB-RAM = size) | 2+=manual |
|||
AUTO_SETUP_SWAPFILE_SIZE=1 |
|||
# Optional swapfile location |
|||
AUTO_SETUP_SWAPFILE_LOCATION=/var/swap |
|||
|
|||
# Unmask (enable) systemd-logind service, which is masked by default on DietPi |
|||
AUTO_UNMASK_LOGIND=0 |
|||
|
|||
##### Software Automation Options ##### |
|||
|
|||
# Fully automate the installation |
|||
# 1=Automated installation with no user inputs. |
|||
# It is HIGHLY recommended to also set CONFIG_BOOT_WAIT_FOR_NETWORK=2, to force infinite wait for network connection during boot, preventing no connection errors due to timeout. |
|||
AUTO_SETUP_AUTOMATED=1 |
|||
|
|||
# Global Password to be applied for the system |
|||
# Requires AUTO_SETUP_AUTOMATED=1 |
|||
# Affects user "root" and "dietpi" login passwords, and, all software installed by dietpi-software, that requires a password |
|||
# eg: MySQL, Transmission, Deluge etc. |
|||
# WARN: Passwords with the any of the following characters are not supported: \"$ |
|||
# WARN: Do NOT change this entry after 1st run setup of DietPi has been completed. It is always scraped by dietpi-software. |
|||
AUTO_SETUP_GLOBAL_PASSWORD=dietpi |
|||
|
|||
# DietPi-Software to automatically install. | requires AUTO_SETUP_AUTOMATED=1 |
|||
# For a list of software index's (ID's), run '/DietPi/dietpi/dietpi-software list' |
|||
# No limit on number entries, add as many as you need and uncomment the line. |
|||
# DietPi will automatically install all pre-reqs (eg: ALSA/XSERVER for desktops etc) |
|||
# - Examples: |
|||
#AUTO_SETUP_INSTALL_SOFTWARE_ID=23 #will install Desktop LXDE |
|||
#AUTO_SETUP_INSTALL_SOFTWARE_ID=74 #will install LAMP webserver stack |
|||
#AUTO_SETUP_INSTALL_SOFTWARE_ID=44 #will install Bittorrent transmission |
|||
|
|||
# DietPi-Software Choice System |
|||
# SSH Server Selection: |
|||
# 0=none |
|||
# -1=dropbear |
|||
# -2=opensshserver |
|||
AUTO_SETUP_SSH_SERVER_INDEX=-2 |
|||
|
|||
# File Server Selection: |
|||
# 0=none/manual |
|||
# -1=proftp |
|||
# -2=samba |
|||
AUTO_SETUP_FILE_SERVER_INDEX=0 |
|||
|
|||
# Logging Mode Selection: |
|||
# 0=none/manual |
|||
# -1=ramlog 1h clear |
|||
# -2=ramlog 1h save clear |
|||
# -3=logrotate + rsyslog |
|||
AUTO_SETUP_LOGGING_INDEX=-1 |
|||
# RAMlog max tmpfs size (MB). 50MB should be fine for single use. 200MB+ for heavy webserver and access log use etc. |
|||
AUTO_SETUP_RAMLOG_MAXSIZE=50 |
|||
|
|||
# Webserver Preference Selection: |
|||
# NB: This will get ignored, if you have manually selected any WEBSERVER_Stack. |
|||
# 0=Apache2 |
|||
# -1=Nginx |
|||
# -2=Lighttpd |
|||
AUTO_SETUP_WEB_SERVER_INDEX=-2 |
|||
|
|||
# DietPi-Autostart | Requires AUTO_SETUP_AUTOMATED=1 |
|||
# After installation is completed, which program should the system boot to? |
|||
# 0=Console 7=Console+auto root login | 1=Kodi 2=Desktops (LXDE/MATE etc) 5=DietPi-Cloudshell 6=Uae4ARM (Fastboot) 8=Uae4ARM (standard boot) 9=dxx-rebirth |
|||
AUTO_SETUP_AUTOSTART_TARGET_INDEX=0 |
|||
|
|||
# Language/Regional settings | Requires AUTO_SETUP_AUTOMATED=1 |
|||
# Timezone eg: Europe/London America/New_York | Full list (TZ*): https://en.wikipedia.org/wiki/List_of_tz_database_time_zones |
|||
AUTO_SETUP_TIMEZONE=Europe/London |
|||
# Locale eg: en_GB.UTF-8 / en_US.UTF-8 etc. One entry ONLY. |
|||
AUTO_SETUP_LOCALE=en_GB.UTF-8 |
|||
# Keyboard Layout eg: gb us de fr |
|||
AUTO_SETUP_KEYBOARD_LAYOUT=gb |
|||
|
|||
# Custom Script (pre-networking and pre-DietPi install) | Runs before DietPi installation and networking |
|||
# Allows you to automatically execute a custom script before networking and DietPi installation is started |
|||
# Option 1 = Copy your script to /boot/Automation_Custom_PreScript.sh and it will be executed automatically. |
|||
# NB: Executed script log /var/tmp/dietpi/logs/dietpi-automation_custom_prescript.log |
|||
|
|||
# Custom Script (post-networking and post-DietPi install) | Runs after DietPi installation is completed |
|||
# Allows you to automatically execute a custom script at the end of DietPi installation. |
|||
# Option 1 = Copy your script to /boot/Automation_Custom_Script.sh and it will be executed automatically. |
|||
# Option 2 = Host your script online, then use AUTO_SETUP_CUSTOM_SCRIPT_EXEC=http://myweb.com/myscript.sh , it will be downloaded and executed automatically. | 0=disabled |
|||
# NB: Executed script log /var/tmp/dietpi/logs/dietpi-automation_custom_script.log |
|||
AUTO_SETUP_CUSTOM_SCRIPT_EXEC=0 |
|||
|
|||
#Disable HDMI (and GPU/VPU where supported) output for supported devices: |
|||
# RPi | Odroid C1 | Odroid C2 |
|||
AUTO_SETUP_HEADLESS=0 |
|||
|
|||
#------------------------------------------------------------------------------------------------------ |
|||
# D I E T - P I |
|||
# DietPi-Config settings |
|||
#------------------------------------------------------------------------------------------------------ |
|||
|
|||
#Cpu Governor | ondemand | powersave | performance | conservative |
|||
CONFIG_CPU_GOVERNOR=ondemand |
|||
CONFIG_CPU_USAGE_THROTTLE_UP=50 |
|||
|
|||
#CPU Frequency Limits |
|||
# NB: Intel CPU's use a percentage value (%) from 0-100 (eg: 55) |
|||
# NB: All other devices must use a specific MHz value (eg: 1600) |
|||
# Limit the MAX CPU frequency for all cores | Disabled=disabled |
|||
CONFIG_CPU_MAX_FREQ=Disabled |
|||
# Limit the MIN CPU frequency for all cores | Disabled=disabled |
|||
CONFIG_CPU_MIN_FREQ=Disabled |
|||
|
|||
# Disable Intel-based turbo/boost stepping. This flag should not be required, setting <100% MAX frequency should disable Turbo on Intel CPU's. |
|||
CONFIG_CPU_DISABLE_TURBO=0 |
|||
|
|||
#Min value 10000 microseconds (10ms) |
|||
CONFIG_CPU_ONDEMAND_SAMPLE_RATE=25000 |
|||
|
|||
#sampling rate * down factor / 1000 = Milliseconds (40 = 1000ms when sampling rate is 25000) |
|||
CONFIG_CPU_ONDEMAND_SAMPLE_DOWNFACTOR=80 |
|||
|
|||
#Proxy settings | System-wide proxy settings. Use dietpi-config > networking options to apply. |
|||
# NB: Do not modify, you must use dietpi-config to configure/set options |
|||
CONFIG_PROXY_ENABLED=0 |
|||
CONFIG_PROXY_ADDRESS=MyProxyServer.com |
|||
CONFIG_PROXY_PORT=8080 |
|||
CONFIG_PROXY_USERNAME= |
|||
CONFIG_PROXY_PASSWORD= |
|||
|
|||
#Delay boot until network is established: 0=disabled | 1=10 second wait max (default) | 2=infinite wait |
|||
CONFIG_BOOT_WAIT_FOR_NETWORK=2 |
|||
|
|||
#DietPi checks for updates (allows dietpi to check for updates on a daily basis and boot using a <1kb file download.) |
|||
CONFIG_CHECK_DIETPI_UPDATES=1 |
|||
# Optional: Automatically update DietPi when updates are available. | requires CONFIG_CHECK_DIETPI_UPDATES=1 |
|||
CONFIG_AUTO_DIETPI_UPDATES=0 |
|||
|
|||
#NTPD Update Mode: 0=disabled | 1=boot only | 2=boot + daily | 3=boot + hourly | 4=Daemon + Drift |
|||
CONFIG_NTP_MODE=2 |
|||
|
|||
#WiFi country code. 2 character value (eg GB US DE JP): https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2 |
|||
CONFIG_WIFI_COUNTRY_CODE=GB |
|||
|
|||
#Serial Console: Set to 0 if you do not require serial console. |
|||
CONFIG_SERIAL_CONSOLE_ENABLE=1 |
|||
|
|||
#Soundcard |
|||
CONFIG_SOUNDCARD=none |
|||
|
|||
#LCD Panel addon |
|||
# NB: Do not modify, you must use dietpi-config to configure/set options |
|||
CONFIG_LCDPANEL=none |
|||
|
|||
#IPv6 |
|||
CONFIG_ENABLE_IPV6=1 |
|||
|
|||
#Prefer IPv4 with APT and wget, NB: This has no effect if IPv6 is disabled anyway! |
|||
CONFIG_PREFER_IPV4=1 |
|||
|
|||
#APT mirrors which are applied to /etc/apt/sources.list | Values here will also be applied during 1st run setup |
|||
# Raspbian = https://www.raspbian.org/RaspbianMirrors |
|||
# Debian = https://www.debian.org/mirror/official#list |
|||
CONFIG_APT_RASPBIAN_MIRROR=http://raspbian.raspberrypi.org/raspbian |
|||
CONFIG_APT_DEBIAN_MIRROR=https://deb.debian.org/debian/ |
|||
|
|||
#NTPD mirror, applied to /etc/ntp.conf |
|||
# For a full list, please see http://www.pool.ntp.org |
|||
# Please remove the initial integer and full stop from the value (removing 0.). eg: debian.pool.ntp.org |
|||
CONFIG_NTP_MIRROR=debian.pool.ntp.org |
|||
|
|||
#------------------------------------------------------------------------------------------------------ |
|||
# D I E T - P I |
|||
# DietPi-Software settings |
|||
#------------------------------------------------------------------------------------------------------ |
|||
#Enter your EmonCMS.org write API key here. It will be applied automatically during EmonPi/Hub installation. |
|||
# eg: SOFTWARE_EMONHUB_APIKEY=b4dfmk2o203mmxx93a |
|||
SOFTWARE_EMONHUB_APIKEY= |
|||
|
|||
#VNC Server Options |
|||
SOFTWARE_VNCSERVER_WIDTH=1280 |
|||
SOFTWARE_VNCSERVER_HEIGHT=720 |
|||
SOFTWARE_VNCSERVER_DEPTH=16 |
|||
SOFTWARE_VNCSERVER_DISPLAY_INDEX=1 |
|||
SOFTWARE_VNCSERVER_SHARE_DESKTOP=0 |
|||
|
|||
#Optional username for ownCloud/Nextcloud admin account, the default is 'admin'. Applied during installation. |
|||
SOFTWARE_OWNCLOUD_NEXTCLOUD_USERNAME=admin |
|||
|
|||
#Optional data directory for ownCloud, default is '/mnt/dietpi_userdata/owncloud_data'. Applied during installation. |
|||
# This option is for advanced users. For full compatibility, please keep this options defaults, and, use dietpi-drive_manager to move the DietPi user data location. |
|||
SOFTWARE_OWNCLOUD_DATADIR=/mnt/dietpi_userdata/owncloud_data |
|||
|
|||
#Optional data directory for Nextcloud, default is '/mnt/dietpi_userdata/nextcloud_data'. Applied during installation. |
|||
# This option is for advanced users. For full compatibility, please keep this options defaults, and, use dietpi-drive_manager to move the DietPi user data location. |
|||
SOFTWARE_NEXTCLOUD_DATADIR=/mnt/dietpi_userdata/nextcloud_data |
|||
|
|||
#Wifi Hotspot |
|||
SOFTWARE_WIFI_HOTSPOT_SSID=DietPi-HotSpot |
|||
# minimum of 8 characters |
|||
SOFTWARE_WIFI_HOTSPOT_KEY=dietpihotspot |
|||
SOFTWARE_WIFI_HOTSPOT_CHANNEL=3 |
|||
|
|||
#Xorg options |
|||
# DPI 96(default) 120(+25%) 144(+50%) 168(+75%) 192(+100%) |
|||
SOFTWARE_XORG_DPI=96 |
|||
|
|||
#Chromium Options |
|||
SOFTWARE_CHROMIUM_RES_X=1280 |
|||
SOFTWARE_CHROMIUM_RES_Y=720 |
|||
SOFTWARE_CHROMIUM_AUTOSTART_URL=https://google.com |
|||
|
|||
#------------------------------------------------------------------------------------------------------ |
|||
# D I E T - P I |
|||
# Dev settings |
|||
#------------------------------------------------------------------------------------------------------ |
|||
DEV_GITBRANCH=master |
|||
DEV_GITOWNER=Fourdee |
|||
|
|||
#------------------------------------------------------------------------------------------------------ |
|||
# D I E T - P I |
|||
# Settings, automatically added by dietpi-update |
|||
#------------------------------------------------------------------------------------------------------ |
|||
@ -0,0 +1,256 @@ |
|||
# IMPORTANT: |
|||
# - Modifications to /boot/dietpi.txt will not be preserved on reboot. |
|||
# - Please ensure you edit from the DietPi-RAMdisk location: /DietPi/dietpi.txt |
|||
|
|||
# NB: This is intended for advanced users, unless you know what you are doing, do not edit this file. Please use the DietPi programs instead. |
|||
# NB: Do not remove uncommented lines, as the items are scraped by DietPi programs, on demand. |
|||
|
|||
#------------------------------------------------------------------------------------------------------ |
|||
# D I E T - P I |
|||
# DietPi-Automation settings, applied on the 1st boot of DietPi, ONCE |
|||
#------------------------------------------------------------------------------------------------------ |
|||
|
|||
##### Networking Options ##### |
|||
|
|||
# If both Ethernet and Wifi are enabled, Wifi will take priority and Ethernet will be disabled. |
|||
# 1=enabled |
|||
AUTO_SETUP_NET_ETHERNET_ENABLED=1 |
|||
AUTO_SETUP_NET_WIFI_ENABLED=0 |
|||
|
|||
# If using WiFi, please edit the following to pre-enter creds /boot/dietpi-wifi.txt |
|||
|
|||
# Enter your Static Network details below, if applicable. |
|||
AUTO_SETUP_NET_USESTATIC=0 |
|||
AUTO_SETUP_NET_STATIC_IP=192.168.0.100 |
|||
AUTO_SETUP_NET_STATIC_MASK=255.255.255.0 |
|||
AUTO_SETUP_NET_STATIC_GATEWAY=192.168.0.1 |
|||
AUTO_SETUP_NET_STATIC_DNS=8.8.8.8 |
|||
|
|||
# Hostname |
|||
AUTO_SETUP_NET_HOSTNAME=DietPi |
|||
|
|||
# Force ethernet speeds |
|||
# NB: This is mainly aimed at Pine A64's which may have an HW issue that causes unstable 1Gbit link. |
|||
# 0=automatic speed | 10 = 10mbit, 100 = 100mbit etc |
|||
AUTO_SETUP_NET_ETH_FORCE_SPEED=0 |
|||
|
|||
##### Misc Options ##### |
|||
|
|||
# Size of swapfile to generate (MB) |
|||
# 0=Disabled | 1=auto (2GB-RAM = size) | 2+=manual |
|||
AUTO_SETUP_SWAPFILE_SIZE=1 |
|||
# Optional swapfile location |
|||
AUTO_SETUP_SWAPFILE_LOCATION=/var/swap |
|||
|
|||
# Unmask (enable) systemd-logind service, which is masked by default on DietPi |
|||
AUTO_UNMASK_LOGIND=0 |
|||
|
|||
##### Software Automation Options ##### |
|||
|
|||
# Fully automate the installation |
|||
# 1=Automated installation with no user inputs. |
|||
# It is HIGHLY recommended to also set CONFIG_BOOT_WAIT_FOR_NETWORK=2, to force infinite wait for network connection during boot, preventing no connection errors due to timeout. |
|||
AUTO_SETUP_AUTOMATED=0 |
|||
|
|||
# Global Password to be applied for the system |
|||
# Requires AUTO_SETUP_AUTOMATED=1 |
|||
# Affects user "root" and "dietpi" login passwords, and, all software installed by dietpi-software, that requires a password |
|||
# eg: MySQL, Transmission, Deluge etc. |
|||
# WARN: Passwords with the any of the following characters are not supported: \"$ |
|||
# WARN: Do NOT change this entry after 1st run setup of DietPi has been completed. It is always scraped by dietpi-software. |
|||
AUTO_SETUP_GLOBAL_PASSWORD=dietpi |
|||
|
|||
# DietPi-Software to automatically install. | requires AUTO_SETUP_AUTOMATED=1 |
|||
# For a list of software index's (ID's), run '/DietPi/dietpi/dietpi-software list' |
|||
# No limit on number entries, add as many as you need and uncomment the line. |
|||
# DietPi will automatically install all pre-reqs (eg: ALSA/XSERVER for desktops etc) |
|||
# - Examples: |
|||
#AUTO_SETUP_INSTALL_SOFTWARE_ID=23 #will install Desktop LXDE |
|||
#AUTO_SETUP_INSTALL_SOFTWARE_ID=74 #will install LAMP webserver stack |
|||
#AUTO_SETUP_INSTALL_SOFTWARE_ID=44 #will install Bittorrent transmission |
|||
|
|||
# DietPi-Software Choice System |
|||
# SSH Server Selection: |
|||
# 0=none |
|||
# -1=dropbear |
|||
# -2=opensshserver |
|||
AUTO_SETUP_SSH_SERVER_INDEX=-1 |
|||
|
|||
# File Server Selection: |
|||
# 0=none/manual |
|||
# -1=proftp |
|||
# -2=samba |
|||
AUTO_SETUP_FILE_SERVER_INDEX=0 |
|||
|
|||
# Logging Mode Selection: |
|||
# 0=none/manual |
|||
# -1=ramlog 1h clear |
|||
# -2=ramlog 1h save clear |
|||
# -3=logrotate + rsyslog |
|||
AUTO_SETUP_LOGGING_INDEX=-1 |
|||
# RAMlog max tmpfs size (MB). 50MB should be fine for single use. 200MB+ for heavy webserver and access log use etc. |
|||
AUTO_SETUP_RAMLOG_MAXSIZE=50 |
|||
|
|||
# Webserver Preference Selection: |
|||
# NB: This will get ignored, if you have manually selected any WEBSERVER_Stack. |
|||
# 0=Apache2 |
|||
# -1=Nginx |
|||
# -2=Lighttpd |
|||
AUTO_SETUP_WEB_SERVER_INDEX=-2 |
|||
|
|||
# DietPi-Autostart | Requires AUTO_SETUP_AUTOMATED=1 |
|||
# After installation is completed, which program should the system boot to? |
|||
# 0=Console 7=Console+auto root login | 1=Kodi 2=Desktops (LXDE/MATE etc) 5=DietPi-Cloudshell 6=Uae4ARM (Fastboot) 8=Uae4ARM (standard boot) 9=dxx-rebirth |
|||
AUTO_SETUP_AUTOSTART_TARGET_INDEX=0 |
|||
|
|||
# Language/Regional settings | Requires AUTO_SETUP_AUTOMATED=1 |
|||
# Timezone eg: Europe/London America/New_York | Full list (TZ*): https://en.wikipedia.org/wiki/List_of_tz_database_time_zones |
|||
AUTO_SETUP_TIMEZONE=Europe/London |
|||
# Locale eg: en_GB.UTF-8 / en_US.UTF-8 etc. One entry ONLY. |
|||
AUTO_SETUP_LOCALE=en_GB.UTF-8 |
|||
# Keyboard Layout eg: gb us de fr |
|||
AUTO_SETUP_KEYBOARD_LAYOUT=gb |
|||
|
|||
# Custom Script (pre-networking and pre-DietPi install) | Runs before DietPi installation and networking |
|||
# Allows you to automatically execute a custom script before networking and DietPi installation is started |
|||
# Option 1 = Copy your script to /boot/Automation_Custom_PreScript.sh and it will be executed automatically. |
|||
# NB: Executed script log /var/tmp/dietpi/logs/dietpi-automation_custom_prescript.log |
|||
|
|||
# Custom Script (post-networking and post-DietPi install) | Runs after DietPi installation is completed |
|||
# Allows you to automatically execute a custom script at the end of DietPi installation. |
|||
# Option 1 = Copy your script to /boot/Automation_Custom_Script.sh and it will be executed automatically. |
|||
# Option 2 = Host your script online, then use AUTO_SETUP_CUSTOM_SCRIPT_EXEC=http://myweb.com/myscript.sh , it will be downloaded and executed automatically. | 0=disabled |
|||
# NB: Executed script log /var/tmp/dietpi/logs/dietpi-automation_custom_script.log |
|||
AUTO_SETUP_CUSTOM_SCRIPT_EXEC=0 |
|||
|
|||
#Disable HDMI (and GPU/VPU where supported) output for supported devices: |
|||
# RPi | Odroid C1 | Odroid C2 |
|||
AUTO_SETUP_HEADLESS=0 |
|||
|
|||
#------------------------------------------------------------------------------------------------------ |
|||
# D I E T - P I |
|||
# DietPi-Config settings |
|||
#------------------------------------------------------------------------------------------------------ |
|||
|
|||
#Cpu Governor | ondemand | powersave | performance | conservative |
|||
CONFIG_CPU_GOVERNOR=ondemand |
|||
CONFIG_CPU_USAGE_THROTTLE_UP=50 |
|||
|
|||
#CPU Frequency Limits |
|||
# NB: Intel CPU's use a percentage value (%) from 0-100 (eg: 55) |
|||
# NB: All other devices must use a specific MHz value (eg: 1600) |
|||
# Limit the MAX CPU frequency for all cores | Disabled=disabled |
|||
CONFIG_CPU_MAX_FREQ=Disabled |
|||
# Limit the MIN CPU frequency for all cores | Disabled=disabled |
|||
CONFIG_CPU_MIN_FREQ=Disabled |
|||
|
|||
# Disable Intel-based turbo/boost stepping. This flag should not be required, setting <100% MAX frequency should disable Turbo on Intel CPU's. |
|||
CONFIG_CPU_DISABLE_TURBO=0 |
|||
|
|||
#Min value 10000 microseconds (10ms) |
|||
CONFIG_CPU_ONDEMAND_SAMPLE_RATE=25000 |
|||
|
|||
#sampling rate * down factor / 1000 = Milliseconds (40 = 1000ms when sampling rate is 25000) |
|||
CONFIG_CPU_ONDEMAND_SAMPLE_DOWNFACTOR=80 |
|||
|
|||
#Proxy settings | System-wide proxy settings. Use dietpi-config > networking options to apply. |
|||
# NB: Do not modify, you must use dietpi-config to configure/set options |
|||
CONFIG_PROXY_ENABLED=0 |
|||
CONFIG_PROXY_ADDRESS=MyProxyServer.com |
|||
CONFIG_PROXY_PORT=8080 |
|||
CONFIG_PROXY_USERNAME= |
|||
CONFIG_PROXY_PASSWORD= |
|||
|
|||
#Delay boot until network is established: 0=disabled | 1=10 second wait max (default) | 2=infinite wait |
|||
CONFIG_BOOT_WAIT_FOR_NETWORK=1 |
|||
|
|||
#DietPi checks for updates (allows dietpi to check for updates on a daily basis and boot using a <1kb file download.) |
|||
CONFIG_CHECK_DIETPI_UPDATES=1 |
|||
# Optional: Automatically update DietPi when updates are available. | requires CONFIG_CHECK_DIETPI_UPDATES=1 |
|||
CONFIG_AUTO_DIETPI_UPDATES=0 |
|||
|
|||
#NTPD Update Mode: 0=disabled | 1=boot only | 2=boot + daily | 3=boot + hourly | 4=Daemon + Drift |
|||
CONFIG_NTP_MODE=2 |
|||
|
|||
#WiFi country code. 2 character value (eg GB US DE JP): https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2 |
|||
CONFIG_WIFI_COUNTRY_CODE=GB |
|||
|
|||
#Serial Console: Set to 0 if you do not require serial console. |
|||
CONFIG_SERIAL_CONSOLE_ENABLE=1 |
|||
|
|||
#Soundcard |
|||
CONFIG_SOUNDCARD=none |
|||
|
|||
#LCD Panel addon |
|||
# NB: Do not modify, you must use dietpi-config to configure/set options |
|||
CONFIG_LCDPANEL=none |
|||
|
|||
#IPv6 |
|||
CONFIG_ENABLE_IPV6=1 |
|||
|
|||
#Prefer IPv4 with APT and wget, NB: This has no effect if IPv6 is disabled anyway! |
|||
CONFIG_PREFER_IPV4=1 |
|||
|
|||
#APT mirrors which are applied to /etc/apt/sources.list | Values here will also be applied during 1st run setup |
|||
# Raspbian = https://www.raspbian.org/RaspbianMirrors |
|||
# Debian = https://www.debian.org/mirror/official#list |
|||
CONFIG_APT_RASPBIAN_MIRROR=http://raspbian.raspberrypi.org/raspbian |
|||
CONFIG_APT_DEBIAN_MIRROR=https://deb.debian.org/debian/ |
|||
|
|||
#NTPD mirror, applied to /etc/ntp.conf |
|||
# For a full list, please see http://www.pool.ntp.org |
|||
# Please remove the initial integer and full stop from the value (removing 0.). eg: debian.pool.ntp.org |
|||
CONFIG_NTP_MIRROR=debian.pool.ntp.org |
|||
|
|||
#------------------------------------------------------------------------------------------------------ |
|||
# D I E T - P I |
|||
# DietPi-Software settings |
|||
#------------------------------------------------------------------------------------------------------ |
|||
#Enter your EmonCMS.org write API key here. It will be applied automatically during EmonPi/Hub installation. |
|||
# eg: SOFTWARE_EMONHUB_APIKEY=b4dfmk2o203mmxx93a |
|||
SOFTWARE_EMONHUB_APIKEY= |
|||
|
|||
#VNC Server Options |
|||
SOFTWARE_VNCSERVER_WIDTH=1280 |
|||
SOFTWARE_VNCSERVER_HEIGHT=720 |
|||
SOFTWARE_VNCSERVER_DEPTH=16 |
|||
SOFTWARE_VNCSERVER_DISPLAY_INDEX=1 |
|||
SOFTWARE_VNCSERVER_SHARE_DESKTOP=0 |
|||
|
|||
#Optional username for ownCloud/Nextcloud admin account, the default is 'admin'. Applied during installation. |
|||
SOFTWARE_OWNCLOUD_NEXTCLOUD_USERNAME=admin |
|||
|
|||
#Optional data directory for ownCloud, default is '/mnt/dietpi_userdata/owncloud_data'. Applied during installation. |
|||
# This option is for advanced users. For full compatibility, please keep this options defaults, and, use dietpi-drive_manager to move the DietPi user data location. |
|||
SOFTWARE_OWNCLOUD_DATADIR=/mnt/dietpi_userdata/owncloud_data |
|||
|
|||
#Optional data directory for Nextcloud, default is '/mnt/dietpi_userdata/nextcloud_data'. Applied during installation. |
|||
# This option is for advanced users. For full compatibility, please keep this options defaults, and, use dietpi-drive_manager to move the DietPi user data location. |
|||
SOFTWARE_NEXTCLOUD_DATADIR=/mnt/dietpi_userdata/nextcloud_data |
|||
|
|||
#Wifi Hotspot |
|||
SOFTWARE_WIFI_HOTSPOT_SSID=DietPi-HotSpot |
|||
# minimum of 8 characters |
|||
SOFTWARE_WIFI_HOTSPOT_KEY=dietpihotspot |
|||
SOFTWARE_WIFI_HOTSPOT_CHANNEL=3 |
|||
|
|||
#Xorg options |
|||
# DPI 96(default) 120(+25%) 144(+50%) 168(+75%) 192(+100%) |
|||
SOFTWARE_XORG_DPI=96 |
|||
|
|||
#Chromium Options |
|||
SOFTWARE_CHROMIUM_RES_X=1280 |
|||
SOFTWARE_CHROMIUM_RES_Y=720 |
|||
SOFTWARE_CHROMIUM_AUTOSTART_URL=https://google.com |
|||
|
|||
#------------------------------------------------------------------------------------------------------ |
|||
# D I E T - P I |
|||
# Dev settings |
|||
#------------------------------------------------------------------------------------------------------ |
|||
DEV_GITBRANCH=master |
|||
DEV_GITOWNER=Fourdee |
|||
|
|||
#------------------------------------------------------------------------------------------------------ |
|||
# D I E T - P I |
|||
# Settings, automatically added by dietpi-update |
|||
#------------------------------------------------------------------------------------------------------ |
|||
Loading…
Reference in new issue