## How to update my RaspiBlitz (AFTER version 0.98)?
*Notice: Please be sure that your base image you started with was version 0.98 or greater. If you used the now deprecated XXupdateScripts.sh script to update before, you might have started with an older base image. If you never run that script, your good.*
*Notice: Please be sure that your base image you started with was version 0.98 or greater. If you used the now deprecated XXupdateScripts.sh script to update before, you might have started with an older base image. If you never run that script, you're good.*
To prepare the RaspiBlitz update:
@ -10,79 +10,75 @@ To prepare the RaspiBlitz update:
- remove power
- remove SD card
Now download the new RaspiBlitz SD card image and write it to your SD card .. yes you simply overwrite the old one, its OK all your personal data is on the HDD (if you havent done any manual changes to the system). See details about latest SD card image here: https://github.com/rootzoll/raspiblitz#scenario-2-start-at-home
Now download the new RaspiBlitz SD card image and write it to your SD card .. yes you simply overwrite the old one, it's OK, all your personal data is on the HDD (if you haven't done any manual changes to the system). See details about latest SD card image here: https://github.com/rootzoll/raspiblitz#scenario-2-start-at-home
If done successful simple put the SD card into the RaspiBlitz and power on again. Then follow the instructions on the display ... and dont worry you dont need to redownload the blockchain again.
If done successfully, simply put the SD card into the RaspiBlitz and power on again. Then follow the instructions on the display ... and dont worry, you dont need to re-download the blockchain again.
## How to update my RaspiBlitz (BEFORE version 0.98)?
Before version 0.98 you need to setup a new RaspiBlitz. So close all channels. Remove all funds from your Raspiblitz (cash-out). Go into terminal and run: `sudo /home/admin/XXleanHDD.sh` and then `sudo shutdown now`. This way you keep your blockchain data on the HDD, but your HDD is cleaned. Now follow again: https://github.com/rootzoll/raspiblitz#scenario-2-start-at-home
You need to setup a new RaspiBlitz. So close all channels. Remove all funds from your Raspiblitz (cash-out). Go into terminal and run: `sudo /home/admin/XXleanHDD.sh` and then `sudo shutdown now`. This way you keep your blockchain data on the HDD, but your HDD is cleaned. Now follow again: https://github.com/rootzoll/raspiblitz#scenario-2-start-at-home
## Why do I need to re-burn my SD card for an update (AFTER version 0.98)?
I know it would be nicer to run just an update script and you are ready to go. But then the scripts would need to be written in a much more complex way to be able to work with any versions of LND and Bitcoind (they are already complex enough with all the edge cases) and testing would become even more time consuming as it is now already. Thats nothing a single developer can deliver.
I know it would be nicer to run just an update script and you are ready to go. But then the scripts would need to be written in a much more complex way to be able to work with any versions of LND and Bitcoind (they are already complex enough with all the edge cases) and testing would become even more time consuming than it is now already. That's nothing a single developer can deliver.
For some it might be a pain point to make a update by re-burning a new sd card - especially if you added own scripts or made changes to the system -> but thats by design. Its a way to enforce a "clean state" with every update - the same state that I tested and developed the scripts against. The reason for that pain: I simply cannot write and support scripts that run on every modified system forever - thats simply too much work.
For some, it might be a pain point to make an update by re-burning a new sd card - especially if you added your own scripts or made changes to the system - but thats by design. It's a way to enforce a "clean state" with every update - the same state that I tested and developed the scripts with. The reason for that pain: I simply cannot write and support scripts that run on every modified system forever - that's simply too much work.
With the SD card update mechanism I reduce complexity, I deliver a "clean state" OS, LND/Bitcoind and the scripts tightly bundled together exactly in the dependency/combination like I tested them and its much easier to reproduce bug reports and give support that way.
Of course people should modify the system, add own scripts, etc ... but if you want also benefit of the updates of the RaspiBlitz you have two ways to do it:
Of course, people should modify the system, add own scripts, etc ... but if you want to also have the benefit of the updates of the RaspiBlitz, you have two ways to do it:
1. Contribute your changes back to the main project as pull requests so that they become part of the next update - the next SD card release.
2. Make your changes so that they survive an SD card update easily -> put all your scripts and extra data onto the HDD AND document for yourself how to activate them again after an update.
2. Make your changes so that they survive an SD card update easily - put all your scripts and extra data onto the HDD AND document for yourself how to activate them again after an update.
BTW there is a beneficial side effect, when updating with a new SD card: You also get rid of any maleware or system bloat that happend in the past. You start with a fresh system :)
BTW there is a beneficial side effect when updating with a new SD card: You also get rid of any malware or system bloat that happened in the past. You start with a fresh system :)
## How to backup my Lightning Node?
CAUTION: Restoring a backup can lead to LOSS OF ALL CHANNEL FUNDS if its not the latest channel state. There is no perfect backup solution for lightning nodes yet - this topic is in development by the community.
CAUTION: Restoring a backup can lead to LOSS OF ALL CHANNEL FUNDS if it's not the latest channel state. There is no perfect backup solution for lightning nodes yet - this topic is in development by the community.
But there is one safe way to start: Store your LND wallet seed (list of words you got on wallet creation) in a safe place. Its the key to recover access to your on-chain funds - your coins that are not bound in an active channel.
Recovering the coins that you have in a active channel is a bit more complicated. Because you have to be sure that you really have an up to date backup of your channel state data. The problem is: If you post an old state of your channel this looks to the network like you want to cheat and your channel partner is allowed claim all the funds in the channel.
Recovering the coins that you have in an active channel is a bit more complicated. Because you have to be sure that you really have an up to date backup of your channel state data. The problem is: If you post an old state of your channel, to the network this looks like an atempt to cheat, and your channel partner is allowed claim all the funds in the channel.
To really have a good backup to rely on such feature needs to be part of the LND software. Almost every other solution would not be perfect. Thats why RaspiBlitz is not trying to provide a backup feature at the moment.
To really have a reliable backup, such feature needs to be part of the LND software. Almost every other solution would not be perfect. Thats why RaspiBlitz is not trying to provide a backup feature at the moment.
But you can try to backup at your own risk. All your Lightning Node data is within the `/mnt/hdd/lnd` directory. Just run a backup of that data when the lnd service is stopped.
## How do I change the Name/Alias of my lightning node
Use the "Change Name/Alias of Node" option in main menu. The RaspiBlitz will make a reboot after this.
Use the "Change Name/Alias of Node" option in the main menu. The RaspiBlitz will make a reboot after this.
## What to do when on SSH I see "WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!"
This means, that he public ssh key of the RaspiBlitz has changed to the one you logged in the last time under that IP.
Its OK when happening during an update - when you changed the sd card image. If its really happening out of the blue - check your local network setup for a second. Maybe the local IP of your RaspiBlitz changed? Is there a second RaspiBlitz connected? Its a security warning, so at least take some time to check if anything is strange. But also dont get to panic - when its in your local network, normally its some network thing - not an intruder.
It's OK when happening during an update - when you changed the sd card image. If it's really happening out of the blue - check your local network setup for a second. Maybe the local IP of your RaspiBlitz changed? Is there a second RaspiBlitz connected? It's a security warning, so at least take some time to check if anything is strange. But also don't get to panic - when it's in your local network, normally it's some network thing - not an intruder.
To fix this and to be able to login with SSH again, you have to remove the old public key for that IP from your local client computer. Just run the following command (with the replaced IP of your RaspiBlitz): `ssh-keygen -R IP-OF-YOUR-RASPIBLITZ` or remove the line for this IP manually from the known_hosts file (path see in warning message).
To fix this and to be able to login with SSH again, you have to remove the old public key for that IP from your local client computer. Just run the following command (with the replaced IP of your RaspiBlitz): `ssh-keygen -R IP-OF-YOUR-RASPIBLITZ` or remove the line for this IP manually from the known_hosts file (see the path to the file in the warning message).
After that you should be able to login with SSH again.
After that, you should be able to login with SSH again.
## When using Auto-Unlock, which security do I loose?
## When using Auto-Unlock, how much security do I lose?
The idea of the "wallet lock" in general is that your privatekey/seed/wallet is stored in a encrypted way on your HDD. On every you restart you have to input the password once manually (unlock your wallet), so that the LND can again read and write to the encrypted wallet. This gives you security if your RaspiBlitz gets stolen or taken away - it looses power and then your wallet is safe - the attacker cannot access your wallet.
The idea of the "wallet lock" in general, is that your privatekey/seed/wallet is stored in a encrypted way on your HDD. On every restart, you have to input the password once manually (unlock your wallet), so that the LND can read and write to the encrypted wallet again. This improves your security if your RaspiBlitz gets stolen or taken away - it loses power and then your wallet is safe - the attacker cannot access your wallet.
When you activate the "Auto-Unlock" feature of the RaspiBlitz, the password of the wallet gets stored on the RaspiBlitz. So for an attacker stealing the RaspiBlitz physically its now possible to find the password and unlock the wallet.
When you activate the "Auto-Unlock" feature of the RaspiBlitz, the password of the wallet gets stored on the RaspiBlitz. So if an attacker steals the RaspiBlitz physically, it's now possible for them to find the password and unlock the wallet.
## I connected my HDD but it still says 'Connect HDD' on the display?
Your HDD may have no partitions yet. SSH into the RaspiBlitz as admin (see command and password on display) and you should get offert the option to create a partition. If this is not the case:
Your HDD may have no partitions yet. SSH into the RaspiBlitz as admin (see command and password on display) and you should be offered the option to create a partition. If this is not the case:
Check/Exchange the USB cable. Connect the HDD to another computer and check if it shows up at all..
Check/Exchange the USB cable. Connect the HDD to another computer and check if it shows up at all.
Rytis Bieliauskas
6 years ago
GitHub