dietpi readme updates

dietpi/README.md

@@ -7,7 +7,7 @@ This guide was tested on:
 * Odroid HC1
 * Odroid HC2 (the same board with a 3.5" 12V HDD)
 * Odroid XU4 (with HDMI screen)
-* Raspberry Pi 3 B + (no support for the default GPIO LCDso far, but the HDMI works)
+* Raspberry Pi 3 B + (no support for the default GPIO LCD so far, but the HDMI works)
 
 See the [hardware comparison](hw_comparison.md).
 
@@ -15,7 +15,6 @@ The screen tested: https://www.aliexpress.com/item/3-5-inch-LCD-HDMI-USB-Touch-S
 
 ---
 
-
 ### Downloads and walkthrough for the [Odroid HC1 / HC2 / XU3 / XU4](Odroid_HC1_HC2.md)
 ---
 ## General guide for the RaspiBlitz-on-DietPi 

dietpi/boot/Automation_Custom_Script.sh

@@ -1 +1,14 @@
-wget https://github.com/openoms/raspiblitz/raw/DietPi/build_sdcard.sh && sudo bash build_sdcard.sh DietPi openoms
+# Use this format to build the SDcard with the Raspiblitz script:  
+# wget https://raw.githubusercontent.com/[GITHUB-USERNAME]/raspiblitz/[BRANCH]/build_sdcard.sh && sudo bash build_sdcard.sh [BRANCH] [GITHUB-USERNAME]`  
+# If you are working from a forked repo be aware of that the fork needs to be called `raspiblitz` for the git downloads to work.
+
+# Uncomment the line with the branch you want to build the SDcard from:
+
+# @rootzoll master branch:
+# wget https://raw.githubusercontent.com/rootzoll/raspiblitz/master/build_sdcard.sh && sudo bash build_sdcard.sh
+
+# @rootzoll dev branch:
+# wget https://raw.githubusercontent.com/rootzoll/raspiblitz/dev/build_sdcard.sh && sudo bash build_sdcard.sh dev
+
+# @openoms DietPi branch:
+# wget https://github.com/openoms/raspiblitz/raw/DietPi/build_sdcard.sh && sudo bash build_sdcard.sh DietPi openoms